Some outlook 2010 messages arrive with blank text in the body, others are fine

running windows 7 pro 64 bit and office 2010 64 bit
have tried 2007 32 hit and office 2010 32 bit and the same thing happens

Since the emails received fine from other machine, something must happened when the email arrived the impacted machine. This usally could be caused by the anti-virus, to verify this, please try to run Windows in clean
boot mode to check this issue. If this behavior won't occur in the clean boot mode, please then try to remove the anti-virus and check again.
Sincerely,
Max Meng
Forum Support
Come back and mark the replies as
answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Similar Messages

Some emails I send are arriving with attachments but with no text in the body of the message. In the sent box my emails look OK. So it took me a while to know this was happening.

I have an Apple Mac OS X Yosemite 10.10.3 with a 2.7 GHZ Intel Core 15 Processor. 8GB Memory.
Just discovered that some emails I have sent with attachments have arrived with the attachments OK but my message has disappeared from the email. In the Sent box, the email looks OK with message intact. Has anyone else experienced this? No idea what to do.

This is the Mac Pro desktop forum.
In the received message does the subject appear correctly?
Is just the body message field blank?
What app is the recipient using?
Can they try another pp?
Is there anything strange in the body? Like special characters?

Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"

Hi forum Fellows,
I have the following failure scenario:
1. A user receives an e-mail with an attachment.
2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
5. The effect is that the user cannot send the e-mail.....
------------------------------ TROUBLESHOOTING -----------------------
- I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
---- After: Only one file is written to OutlookTemp. That is FileX.pdf
- Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
**** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
on to be there.
- Going with a totally clean OutlookTemp folder does not help.
------------------ NOW WHAT ---------------
- The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
------------------------------ TECH. INFO -----------------------
Outlook 2010 v14.0.7132.5000
Outlook bit depth: x86
Running on a 2008R2 SP1 TS environment.
No antivirus on the TS
Looking forward to hear from you.
Regards The Red Baron
Red Baron

Hello Red Baron,
Although not a complete answer, the way to treat attachments in emails require some discipline:
1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
the new version etc.
2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
3. Having any (unsaved) document open for several hours should
never occur. What if there is a power outage?
Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
These are the rules I teach my customers and they never leave any document unsaved for hours ...
Best regards George

Outlook 2010 messages that have not been deleted are available in Recover deleted Items list

Hello,
Outlook 2010\Exchange 2010 SP1-clustred
I have looked at several mail accounts through Outlook 2010 client, they are not using the cached mode, they have not emptied the trash.
When I look in Recover deleted items I am seeing messages, mostly sent messages that are available for recovery, the problem is that these messages have not been deleted, they are
still in the sent folder.
I have restored one to see what will happen, it does restore to the deleted items folder.
It seems to random messages some sent to groups some sent to a single individual
Some Outlook 2010 clients I have checked do not show this problem, but several do including myself, I would have assumed that the Outlook 2010 client user had somehow deleted
it and restored it causing this problem if I did not see this on my own account.
Is this normal behavior? Perhaps some from replication or temp draft's
Any help or information would be appreciated.
Thanks

Since the post is over two year old, I'm not sure manotelli is still following it, but I think he is talking about something else:
1. He starts a message and does not complete it (or send it).
2. The message is saved as a draft pending completion.
3. Once he completes the message and sends it, there is an autosaved version that is deleted.
I'm not sure what relationship exists between the "draft" which (I would think) is what is ultimately sent when the message is completed and whatever is sent to the recycle bin.
It has nothing to do with webmail (OWA) or any form of remote access.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

HT203180 I have bought several tv seasons from the itunes store. Recently some episodes will not sync with my ipad. The error message is that the file "could not be read or written". Previous episodes of the same series synced successfully.

I have bought several tv seasons from the itunes store. Recently some episodes will not sync with my ipad. The error message is that the file "could not be read or written". Previous episodes of the same series synced successfully. Also while watching the same episode on my laptop (Mac Book Pro) it freezes.

I had this same message appear today when i was putting new music on my ipod touch 4th gen. The only difference is that I wasnt using an external drive. I was using the one on my computer. This is the first time i have had this problem

Reading email in outlook with c# and parsing the body

Hello,
I don't know where to start.
The organization I work for uses different user web forms to collect user/client feedback. Instead of having those forms populate a table, they have them emailed to me as text in the body of an email for me to decide what to do with. My (local) boss wants
me to upload the data into our CRM. Everyone expects me to do that by hand ( which is now getting out of hand :D.)
I need to read an outlook 2010 email in a shared mailbox (to which I do not know the account password for mail server access) and parse the body data into a data table.
If I can get some help understanding how to access the individual email file(s) and read the data into a string array or something that achieves this result, I can take it from there. All suggestions are welcome however going back to the admin who
is in another country, won't make changes and doesn't speak english are not paths I can follow.
My glass here, is half full with the opportunity to resolve this challenge.

Hello,
You can develop a VBA macro for handling new emails in the shared mailbox. I'd suggest starting from the
Getting Started with VBA in Outlook 2010 article. If you see a shared mailbox in your Outlook profile you can subscribe to the Inbox events (for example, ItemAdd) in the following way:
Dim WithEvents myInboxMailItem As Outlook.Items
Private Sub myInboxMailItem_ItemAdd(ByVal Item As Object)
Call MsgBox("Item Added", vbOKOnly, "[email protected]")
End Sub
Private Sub Initialize_Handler()
Dim fldInbox As Outlook.MAPIFolder
Dim gnspNameSpace As Outlook.NameSpace
Set gnspNameSpace = Outlook.GetNamespace("MAPI") 'Outlook Object
Set fldInbox = gnspNameSpace.Folders("[email protected]").Folders("Inbox")
Set myInboxMailItem = fldInbox.Items
End Sub
Private Sub Application_Startup()
Call Initialize_Handler
End Sub
In the ItemAdd event handler you can get all the required information parse the message body. The Outlook object model provides
three main ways for working with item bodies: Body, HTMLBody and WordEditor.

MLGR - external Mail with text in the body

Hi,
I have a little problem. I setup the MLGR-Message as defined in the wiki.
It works fine with SBWP. There is the message text in the body. When I send it
to an external email-address, then the text is a pdf in the attachment. I'd like to have the text
also in the body of the external mail, so that the user don't have to open the attachment.
What do I have do?
Regards Ralf

Hi Ralf,
the easiest solution will be to switch to Medium 5.
Transmission Medium 5: Communication Strategy - Message Control (CA-GTF-BS) - SAP Library
and if necessary develop some lines of coding to find the correct mail-addresses and the content-stuff.
Class CL_BCS is very good documented and is really easy to use.
or another solution I found in my documents:
Transaction SO16 --> Send Mail to homeaddress. But that implements that you just send mails to internal users.
(And I'm not sure, if you just done exact that to get it to external users)
The SCN-Search brought me this one, but that is what you already got I think:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e19d4c-b72d-2d10-72ad-a38a70c2a53f?quicklink=index&…
~Florian

Why are some of the messages i send in a blue background while others are in a green background?

why are some of the messages i send in a blue background while others are in a green background?

Blue = iMessage...
Green = Text message... SMS

I wanted to tell that the forums were working well again. And then I saw that I could not enter text in the body again with Windows Chrome.

After long waiting and clicking I succeeded to reach this body.
Now I understand why there is so few traffic the last days.
Success
Cor

After long waiting and clicking I succeeded to reach this body.
Did you try to find any more details to refine your symptom description? E.g. this sounds like it might be a variation of the one where in IE we see no Edit toolbar but apparently in that case we could treat it like an HTML source edit pane and
then Submit that. I only see those very sporadically. Another possibility suggested by this description ("could not enter text in the body") would be to turn off CSS. I don't know how you would do that using Chrome but in IE you could
use View, Styles, No Style (Alt-V y N ).
FWIW for me the biggest problem that I had in the last few days was related to DNS. I don't know what was going on but in some cases I had to resort to using nslookup's second operand to request a lookup from Google's DNS server (e.g. 8.8.8.8) and
then try to work with the IP address that that returned. I was mostly on Answers where that happened though.
Robert Aldwinckle
Robert,
I'm just an average user, not as knowledged as you. I thought these forums were for persons like me.
Success
Cor

How Do highlight text in the body of an email message in Mac Mail?

Can anyone tell if IF and HOW I can highlight text in the body of an email message using Mac Mail (in Yosemite). I do NOT mean MARKUP an attachment. I want to highlight a word or phrase in the body of my email message. I know I can change the font color, but can't seem to add a highlight! Thanks!

Hi,
is is possible, - link is below. Works on Yosemite, btw.
http://www.mihalick.us/how-to-highlight-text-in-yellow-using-apple-mail/

Want to send a email with images and text in the body of email in iOS

In iOS, we have written a code to send an email, with embedded images and text in the body of the email ( not attachment) using mail composer. It works well with iOS devices like iPhone and iPad, but does not work in window based OS. Can anybody help. The code is

Thanks James !, do you have an idea how to find the window resource which I belive will be included in our appllication pack.
In above I have missed to copy the code,below is the code. This might help you to help me.
NSMutableString *imgContent = [[[NSMutableString alloc] initWithString:@"<html><body>"] retain];
UIImage *imageData = [UIImage imageNamed:@"Midhun.png"];
NSData *imageDataInBase64 = [NSData dataWithData:UIImagePNGRepresentation(imageData)];
NSString *base64String = [imageDataInBase64 base64EncodedString];
[imgContent appendString:[NSString stringWithFormat:@"<p><b><img src='data:image/png;base64,%@'></b></p>",base64String]];
[imgContent appendString:@"</body></html>"];
MFMailComposeViewController *emailWin = [[MFMailComposeViewController alloc] init];
[emailWin setMessageBody:imgContent isHTML:YES];

Change Filenames with blank spaces in the Filename

I want to change many filenames with blank spaces and replace
blank spaces with underbar character.
Example:
File One change to File_One
File Two change to File_Two
Here is my script:
for file in `ls`
do
i=`ls -1 *" "*`
b=`ls -1 *" "* | sed -e s/\ /_/g`
done
mv "$i" $b
Please advise what is wrong with my script that isnt
working. The script works if I only have one filename
with a blank space. But if I have several filenames
with blank spaces in the name then it doesnt work.

I want to change many filenames with blank spaces and replace
blank spaces with underbar character.
Example:
File One change to File_One
File Two change to File_Two
Here is my script:
for file in `ls`
do
i=`ls -1 *" "*`
b=`ls -1 *" "* | sed -e s/\ /_/g`
done
mv "$i" $b
Please advise what is wrong with my script that isnt
working. The script works if I only have one filename
with a blank space. But if I have several filenames
with blank spaces in the name then it doesnt work.

When i open my emails with outlook first and then with my ipad 4, the ipad does not show me that i have new mail despite that it actually downloads them. iphone 3g and 4s used to do that. any suggestions please?

when i open my emails with outlook first and then with my ipad 4, the ipad does not show me that i have new mail despite that it actually downloads them. iphone 3g and 4s used to show them as new emails. any suggestions?

1. Open iTunes.
2. Click the View option in the iTunes menu.
3. Select the Show Sidebar option.
Connect your phone, select it in the Sidebar...the various tabs will now show as before.

I am having trouble sending an i message after I type text in the field. The "send" button does not turn blue. Help!

I am having trouble sending an i message after I type text in the field. The "send" button does not turn blue. Help!

Do you have something entered in the Subject field?

Default text in the body of mail when sent to vendor thru PO

Dear friends,
We need to put in the email body a message to vendor.
We wrote in the tcode NACE a message in the text field and the email was generated , but without the text body !
The attachment has been generated correctly. but no text in the body mail...
Does anyone knows the way to send email with a default body text to vendors ?
best regards,
Ale

Hi
You need to do some configuration for this.
Goto NACE .
Select EF and click on OUTPUT TYPES.
Then select Output Type NEU and click on processing routines .
In that you have to add a new entry - medium 5 .
Then you need to assign a program, form routine and form.
You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as
TEXT_SYMBOL_REPLACE .
Now the subject will be PO No. 1800004202.
You need to maintain your email id in tcode SU01 and also the vendor's email id.
Now while creating a new purchase order , change the medium to External Send .
Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
Goto tcode ME9F .
Execute.
Select the checkbox and click on Output Message.
You will get a message MAII 00000000000001 generated .
If the BASIS guys have made the necessary configuration for sending mail then the mail will go .
You can see the status and what is sent via tcode SOST.
Hope it helps
Best Regards

Some outlook 2010 messages arrive with blank text in the body, others are fine

Similar Messages

Maybe you are looking for