Some Questions on MIDP 2.0 on non Symbian phones

Hi,
I have been reading around on this forum seaaarching for some answers.. but all i can seem to find is a mix of hazy suggestions. Nobody seems quite clear on these issues. i am windering if someone out there has some definate answers.
1. I have been reading that you can listen for incoming SMS by listening at a specified port. From what i believe.. if you intercept the message and do whatever you need to do with it.. there is never any chance of it reaching the phones inbox. Is this correct?? If this is correct is there someway that you could listen for a message and if it was not from the specific sender.. dont process it and send it to the inbox?? Ideally in my application I would like to be able to intercept SMS, read them and then later be able to see them in my inbox.
2. If I have my application running and I receive a phone call.. what happens?? Does it allow me to take the call and then return to my app?? Or do i have to intercept the call in my application and process it?? (If this is the case will I be able to see it in my call log). Also if I want to make calls from my application will i be free to use the number keys to punch in a number and the phone allows me to make a call?? If i call a number from within my code by clicking on a link I probably wont see this in my call log - is this true??
3. Does the Wirelesss Messaging API allow me to process and send MMS messages??
(Sorry but I just dont have a non Symbian MIDP 2.0 phone at the moment)
All answers appreciated!
Thanks,
Brian

Hi,
Shmoove thought you were on vacation... you still have not answered my last post ;-) dukes wating for you!!!
Brian, you can make calls from within your MIDlet using your MIDlet class's platformRequest() method.
e.g.
this.platformRequest("tel:"+ myNumber); //from your midlet class
MyMIDlet.platformRequest("tel:"+myNumber); // from elsewhereAs for what does the phone do with an SMS bound for a specific port?
well that depends on the idiot who was the project manager for that device model. Some pass it on to the inbox if there's no listener for that port, some dont. It's better if its not forwarded to the inbox as more often that not its not going to be in H.R.F.
cheers.

Similar Messages

Adobe Reader for non-symbian devices

Why do I have to have a symbian device to read pdf files? We don't need complex operations on a cell-phone with Adobe, other than reading the e-mail attachment.
I would pay for a Java version of the Reader to run on my non-symbian phone.

Thanks George, interesting thought. I looked on Adobe's site and they "advertise" fillable forms for the iPhone and Android markets, but on the Windows Phone tab, that is mysteriously missing. lol Maybe it will come later? Meanwhile, I'll google to see if there are any PDF viewers that can handle it now. Thanks for the reply. :-)

Some questions for ressources provisionning.

Hello people.
I'm currently playing around with LDoms on a new brilliant shiny T5520 and I have some questions about.
My actual configuration is the following:
- 1 T5520 Server with 32 Gb RAM and a 8 cores 64 threads Niagara T2
- 4 SAS 143 Gb disks on controller 1.
The disk are mirrored using raidctl in two pairs of raid 1, c1t0d0 and c1t2d0.
The primary OS is installed on c1t0d0 and I plan to use ZFS for creating vdisks LDoms guests on c1t2d0.
I have access to a netapp but only with iscsi and nfs.
So, the questions:
- Does it make sense to use ZFS on hard mirrored disks ?
- Is it best to add the two disks non mirrored to my ZFS pool and backup snapshots on the netapp ?
- Does my LDoms needs more memory that I planned ? Each guest will have between 2 Gb and 4 Gb for the bigger. I will have, at the beginning 4 or 5 guests for testing / integration, LDAP / DNS services, Licences services, Web Portal, and, maybe, if I could convince my boss a little SPARC Gentoo Linux, just for fun :)
Thanks :)
PS: Forgive my poor English, I'm a French bas***d guy :)

You mean T5220, great machine anyway :)
- RAID hardware is supposed to be faster than ZFS, but ZFS offer more functionalities.
- you need both mirroring and backup, even if nice, ZFS snapshot cannot replace a backup software.
- Keep a free memory pool not allocated and ready to increase the RAM size of a LDOM (rebooting the LDOM will be necessary). And hum... use it to play with linux for sparcs :-)
Regards

Some questions with install paths and reporting

I have some questions that i would like to ask
The first is regarding the installation path of the silverlight client when it is published, where is it located, is there a way to customize your application so that the user can specify an install directory , or a way to update the web.config with
the install directory....
Second question is , in development I am able to create a report, with report viewer using the localhost address of the silverlight client server side. but when i publish it, the address is no longer found. Is there another way I can go about doing
a report of the data in my sliverlight client application ? if so can i get some suggestions , I do know about some of the 3rd party extensions but none of them that I know of are free and I do not have the means right now to get them....
this is all for a 2- tier Desktop silverlight client application.
any help would be appreciated.
Thanks
David.

I wanted to know if i can TELL lightswitch application to install when im running it after it being publised . or where it is installed to after first run of the application.....
as far as Reporting goes and as far as I know DEVEXPRESS no longer supports lightswitch so there is no way for me to get ahold of the xtra reports extension ... please update your knowledge base and offer another solution..
HI David,
Thanks for your response.
From your description above, I think this issue is related to your deployment procedure, you can also customize your deployment path. For this issue, I'd like to suggest you to check it again, you can refer to this article. See:
Deploy a Two-tier LightSwitch Application
If you want to use report extension in lightswitch application, you can learn relevant topics about report extension in Lightswitch forum.
Hope it helps you.Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Some questions of BO Edge or Enterprise Xi 3.1 + updates

Good Morning,
I have some questions
I have SAP NW 7.01 EH1 SP5. sytem installed.
1- I want to install Bo Edge BI Standard 3.1
a) its possible have BO Edge Bi Stantard 3.1 SP2 ?
b) with Edge 3.1 (without sp) its possible Xcelsius Enterprise SP2 connect to BW?
2) I want to update/grade my BO XI 3.1.
How its work about support packages or fix? the sequencial? There is FIX and SP. After finishing BO XI 3.1, what I do next?
a)
1 - Install Sp1
2 - install fix 1.1 1.2 1.3 .... 1.x
3 - install sp2
4 - install fix 2.1 2.2 2.3 ....
b)
1 - Install sp1
2 - Install sp2
3 - install fix 2.1 2.2 .3
My question is, the SP2 for example has whole (sp1+ fix1.1 to 1.x) included? or just fix 1.1 to 1.x < sp 2.0 ?
Thx
Regards,
Amit

Hi,
1) a) SP 2 is not yet available for BO Edge.
1) b) If you ant to use the direct interface to BW queries within XCelsius then your dashboards must be stored/exported in the Netweaver. You do not need a BO Enterprise or Edge system for this. You can just install the XCelsius Designer 2008 SP2, create your dasbhoard and export it to SAP NW.
2) There is no SP1 for BO XI 3.1. BO XI 3.1 is considered to be BO XI 3.0 + Service Pack 1. You can say that BO XI 3.1 is the full (non-incremental) version of Service Pack 1 for BO XI 3.0. For Service Pack 2 exists currently only an incremental version ie. either you install BO XI 3.1 directly or you start from XI 3.0 and then upgrade to XI 3.1. In both cases you install SP2 at the end.
3) This depends on the type of the Service Pack (incremental or full version). I would recommend to always take a look at the release notes prior to the installation of a given Service Pack. Service Pack 2 for BO XI 3.1 can only be applied on a BO XI 3.1 system.
Regards,
Stratos

Reg. some questions

hi gurus
i am placing some questions. i know that this is not right to place some 30 questions, but please take some time to answer so that we can benifit.
thanks
regards
sridhar
[email protected]
1. What is table partition?
2. What are the options available in transfer rule and when ABAP code is recquired during the transfer rule what important variables you can use?
3. How would you optimize the dimensions?
4. What are the conversion routines for units and currencies in the update rule?
5. Can you make an infoobject as info provider and why?
6. What are the steps to unload non cumulative cubes?
7. Give step to step approach to archiving cubex.
8. What are the load process and post processing.
9. What are the data target administration task
10. What are the parallel process that could have locking problems
11. How would you convert a info package group into a process chain?
12. How do you transoform Open Hub Data?
13. What are the data loading tuning one can do?
14. What is ODS?
15. What is the use of BW Statistics?
16. What are the options when definging aggregates?
17. How will you debug errors with SAP GUI (like Active X error etc)
18. When you write user exit for variables what does I_Step do?
19. How do you replace a query result from a master query to a child query?
20. How do you define exception reporting in the background?
21. What kind of tools are available to monitor the overall Query Performance?
22. What can I do if the database proportion is high for all queries?
23. How to call a BW Query from an ABAP program?
24. What are the extractor types?
25. What are the steps to extract data from R/3?
26. What are the steps to configure third party (BAPI) tools?
27. What are the delta options available when you load from flat file?
28. What are the table filled when you select ABAP?
29. What are the steps to create classes in SAP-BW
30. How do you convert from LIS to LO extraction?
31. How do you keep your self-updated on major SAP Develppments, Give an analytical example.

hi sridhar,
if u use this link, u can get morethan 75% answers...
http://www.sap-basis-abap.com/bw/sap-bw-interview-questions.htm
with hopes
Raja Singh

Some questions about building a plug in

Hello,
1.I'm trying to build a plug in ( for EM12c release 2 ) for my standalone java application - which exposes mbeans whom i want to collect some metrics with.
It's been a while since i started to build it - and I asked quite a lot of quesions about it - because the documnets supplied with the EDK and
the books ( ProgrammersGuide, ProgrammersReferece and the README file ) are not very clear to me ( I'm a newbie with EM in general .. )
So far some of the questions got answered and were very halpfull with this long process. BUT, there are some questions that nobody answered yet.
I'm quite "stuck" with it. I'm talking about the questions in : Re: A question about updating metadata files in plug in
I have a deadline for this plug in ( which is very close ..) so this the reason I post this new message.
I will appriciate any help about those questions .
2. Regarding the above, ( hoping to have an answered soon ..) I'm trying another way to buils this plug in:
In the README file there is this section( 3.6 : using MPCUI ) . I read the programmersReference ( chapter 8 ) and followed the instructions both in the README file and the ProgrammersReference .
For a begining, I just wanted to modify a small thing in the example supplied ( Demo Host System ) just to get started with something .
So i modify the file which contains the label ' Select member ... ' ( i don't remember the name of the file since the project is in my office , and I can't copy/paste ..- I think the the file icontians the name ' ConfirmationTarget .xml - it's one of the pages seen while adding a target ) .
I i changed it , i build the project ( using FlexBuilder) but did not use ANT as it's says in the README - the eclipse IDE build this file automatically
( HostSystem.swf in bin-debug dir as it says in the README ) . I copied this file to stage_dir/oms/metadata/mpcui .
i build a new plug in ( i incremented the version of it ) - no errors, everty thing was fine .I also copied this file to the oms server ( it wasn't there before )
and than run the commad ' emctl register oms ...' as it says in section 3.6 - and o got 'Success' eventually .
Now, when i opened the EM console , hoping to see tge change i made ( again , it's just a change of the title of the step while adding the target , and adding another menuitem to the 3 item that were alreay there ( CPU, FS, etc ) .
I believe wad i did is right- i mean changing in the right file and place ( there is no title like like this in any oter source file in the whole project )
but still, I didn't see any change! it seems execatly as it was befoer the change ..
Any idea?
Thanks.

Regarding your question #2. Please read my response here carefully as it covers a number of different issues.
1. Ant is not required to build the SWF file in your plug-in. It is an OPTION. Section 8.27 describes the different development options using either Ant or FlexBuilder.
2. You do NOT need to ever copy a SWF file to any location under the OMS runtime. You need to include it in the stage area and then either build an OPAR or use emctl to incrementally update the deployed plug-in. It has to either be deployed as part of the plug-in deployment or updated incrementally using emctl register oms metadata. Section 8.27.2.6 describes the specific steps to do this incremental update.
Steps to update the SWF associated with demo_hostsample. These are covered in the README and in chapter 8.
1. deploy the demo_hostsample plug-in as described in the README
2. create an instance of the Host Sample target type through manually discovery (Add Targets->Add Non-Host Target Specifying Properties)
3. using the demo_hostsample.zip project in Flex Builder, modify some part of the code, for example, modify the line containing label="Current Status" to label="My New Label"
4. rebuild the SWF, to be sure you can to a Clean build of the demo_hostsample project
5. ensure there is an updated copy of the HostSample.swf under demo_hostsample\mpcui\bin-debug (NOT bin-release, unless you Exported A Release Build)
6. copy that updated HostSample.swf file to the location on the OMS machine where you unzipped and built the OPAR for the demo_hostsample plug-in
7. cd to the stage/oms/metadata/mpcui directory and replace the current HostSample.swf with the one you just built (BE SURE ITS THE UPDATED FILE)
8. execute the command "emctl register oms metadata -sysman_pwd sysman -pluginId oracle.sysman.ohs -service mpcui -file demo_hostsample_uimd_swf.xml (BE SURE TO USE THE CORRECT sysman_pwd)
At this point you should be able to go to the homepage for the Host Sample target you created and see the changes.

Some question when i read ip_filter 3.4.14 source code

when i read ip_filter 3.4.14 source code,i have some question.if you can give directions to me ,i will very appreciate for your generosity.
i read the source code ,and i know how the auther hooked the struct qinit ,my question is " did there have two struct ill_s 's ill_rq point to one struct queue_t?"
if not ,"did there have two struct queue_t 's qinfo
point to one struct qinit?"
if you have the elaborate introduce of the struct ill_s ,please send to me ,i will be very appreciate for your generosity. thank you very much!
your's
sincere
newchess

I don't have anything that just says Adobe Reader. I have Adobe Reader X,
and when I open it none of those options are shown. It says things like
open an existing file, Change pdf to word or excel, etc. No Edit, No
preferences, etc?
On Tue, Oct 21, 2014 at 5:05 PM, Gilad D (try67) <[email protected]>

Hello - i just got an iphone in Dubai - i'm trying to configure it but there some instructions are in Arabic (I'm non Arabic speaking) - this specifically happens when I'm try to sign in to create a new apple ID

Hello - i just got an iphone in Dubai - i'm trying to configure it but there some instructions are in Arabic (I'm non Arabic speaking) - this specifically happens when I'm try to sign in to create a new apple ID

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
The reset link for the security question will send the email to your rescue email account : http://support.apple.com/kb/HT5312 - that is the email account that you are checking, and you've checked the spam folder on it as well as the inbox, and tried clicking the reset link again ?
If you aren't receivineg the email then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 link above to view your rescue email address to check that it's correct, in case you need to use it in the potential future use

Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can speak or response me in thai language
1. ผม อาคเนย์ พำนักอยู่ประเทศไทย กรุงเทพฯ มีปัญหาสอบถาม ดังต่อไปนี้
- กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
- ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
ขอบคุณครับ
อาคเนย์ อุดปิน
กด
<Edited By Host>

Google translation:
พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
http://www.apple.com/emea/support/itunes/contact.html

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Questions on MIDP Security

Hi all,
I've a few questions on MIDP security to seek help:
1) Suppose I have a midlet to store confidential details on the mobile phone, if it doesn't make any connections to the internet, would anyone be able to retrieve the information I'd on the RMS?
2) Again, assuming no internet connection is made by the midlet. Suppose I've a login screen that prompts for a password & uses MD5. Can anyone crack it?
3) Is it possible to retrieve the midlet from the mobile phone itself onto a desktop?
Thanks for the help!

Yes, it is possible to retrieve the data stored in
RMS.
Just try it on a Nokia S60 phone:
1. download and install FExplorer (free file
explorer)
2. go to: c:\system\midp\<vendor>\untrusted\<midlet
name>\<?????> folder
3. select rms.db
3. choose options/send/SMS|MMS|e-mail|bluetooth|irda
Of course cracking is a harder work...does this means that I can follow your step 1 & goto whichever midlet that I'm interested in & send the JAR/JAD file via SMS/MMS/Email/BlueTooth/IRDA?

Some Questions on Adobe PDF Forms

Hi,
I have some questions on Adobe Forms development (especially Adobe Forms in ABAP)
1)     In a form interface, in the Code Initialization can we use Object Oriented Syntaxes such as class method calls, etc?
2)     Can we declare Global Data variables with reference to Class References / Interfaces
3)     Can we use the latest ECC 6.0 enhancement framework to add code in the standard form interface to enhance / enrich some logic within the form? This is to avoid copying the form interface into a Z in order to enrich the form via coding?
Please let me know if this is possible at all and how
Will award points
Thanking You in advance
Regards,
Aditya

That is possible of course. You should use the PDFObject API for that requirements.
1. define a xml schema with all data given by SAP system.
2. create a form template which uses this schema as data connection
3. implement a java application (i.e. J2EE application) which:
- gets the data from SAP system and generates some pdf files (using PDFObject API)
- reads pdf files back to xml and submits the data to a BAPI
Regards
Sebastian

Some questions on SAP DMS

Hello
some questions on SAP DMS:-
- can versions of same document be shown graphically. ?
- can links be created for documents. can we make sure that links are not broken when document is moved ?(links to document on 1st location shall not be broken)
- is there a notification mechanism(user can recieve e-mail when document gets changed)
- is there a review mechanism, before doc. is archived.(sort life cycle)
Thanks

Hi Shovon,
1. can versions of same document be shown graphically?
You can display all existing versions of a document info record by using the menu 'Extras' >> 'Versions'. Then you will see all existing document version for this specific document number. Further you will see which is the current version at the moment.
2. can links be created for documents. can we make sure that links are not broken when document is moved ?(links to document on 1st location shall not be broken)
I'm not quite sure what you mean by links to documents. If you mean linking document info records together, I can confirm that this works also in DMS. You can maintain the object DRAW for object links in the customizing and then you will be able to link one document info record to another. The data for all document info records is stored in table DRAW.
If you are talking about originals which are linked to document info records, please note that if you check in an original the system creates a unique LOIO- and PHIO-ID which is stored in the Content Server and in the database tables DMS_DOC2LOIO and DMS_PHIO2FILE. But there are also different reports to migrate original data from one content Server to another (e.g. DMS_RELOCATE_CONTENT).
3. Is there a notification mechanism(user can recieve e-mail when document gets changed)
Yes you can activate an event type linkage for object
DRAW CHANGED DOKST
DRAW CHANGED DWNAM
in transaction SWE2. Here you just have to set the flag for 'Type linkage' (linkage activated). Then everytime the document is changed a notification is sent to the entered USER of this document info records.
4. Is there a review mechanism, before doc. is archived.(sort life cycle)
Normally there is no special lifecycle. You can control this by maintaining a released status and if there are more versions always version with the release status is the current one. But there is no specific date when the document info record expires or something like that.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Some Questions on MIDP 2.0 on non Symbian phones

Similar Messages

Maybe you are looking for