Some shared paths in file /global/nfs/SUNW.nfs/dfstab.nfs-res are invalid

Hello,
I try to configure a NFS service in a SC 3.1 cluster environment, but this is impossible as the resource is not existing on the secondary node.
I'm sure this is some kind of mis-configuration. I read the docs, but still don't know why.
+/opt/ppark/gateway/logs+ should be the NFS share, whereas a defined RG (ppark-rg) contains the NFS share.
Another requirement: the NFS resource should be a member of this RG (ppark-rg).
My steps were as follows:
1. define the RG.
# scrgadm -a -g ppark-rg -h pixtest1,pixtest22. define the LogicalHostname -
# scrgadm -a -L -l ppark-lh -g ppark-rg1. register the agent -
# scrgadm -a -t SUNW.nfs2. add HAS+
# scrgadm -a -t SUNW.HAStoragePlus3. add the HAS+ Resource
# scrgadm -a -j ppark-stor-res -t SUNW.HAStoragePlus -g ppark-rg -x FilesystemMountpoints=/opt/ppark -x AffinityOn=true4. now, the RG can be brought online -
# scswitch -Z -g ppark-rgHere is the NFS part:
1. making a administrative directory on both nodes -
# mkdir -p /global/nfs/SUNW.nfs2. define the share in /global/nfs/SUNW.nfs/dfstab.nfs-res on both nodes -
# share -F nfs -o rw,anon=0 /opt/ppark/gateway/logs3. define the NFS resource
# scrgadm -a -g ppark-rg -j nfs-res -t nfs -y Network_resources_used=ppark-lh
pixtest2 - Some shared paths in file /global/nfs/SUNW.nfs/dfstab.nfs-res are invalid.
VALIDATE on resource nfs-res, resource group ppark-rg, exited with non-zero exit status.
Validation of resource nfs-res in resource group ppark-rg on node pixtest2 failed.and of course the resource /opt/ppark/gateway/logs is invalid!
According to the syslog on the secondary node the share is not existing - but how should it? It can be only mounted on one node at a time.
Jun 24 13:39:31 pixtest2 Cluster.RGM.rgmd: [ID 707948 daemon.notice] launching method <nfs_validate> for resource <nfs-res>, resource group <ppark-rg>, timeout <300> seconds
Jun 24 13:39:31 pixtest2 SC[SUNW.nfs:3.1,ppark-rg,nfs-res,nfs_validate]: [ID 382252 daemon.error] Share path /opt/ppark/gateway/logs: file system /opt/ppark is not mounted.
Jun 24 13:39:31 pixtest2 SC[SUNW.nfs:3.1,ppark-rg,nfs-res,nfs_validate]: [ID 792295 daemon.error] Some shared paths in file /global/nfs/SUNW.nfs/dfstab.nfs-res are invalid.
Jun 24 13:39:31 pixtest2 Cluster.RGM.rgmd: [ID 699104 daemon.error] VALIDATE failed on resource <nfs-res>, resource group <ppark-rg>, time used: 0% of timeout <300, seconds>How do I prevent this?
Many thanks for some input.
-- Nick

You need to explicitly set the resource dependency to the SUNW.HAStoragePlus resource for the SUNW.nfs resource, like:
scrgadm -a -g ppark-rg -j nfs-res -t nfs -y Network_resources_used=ppark-lh -y Resource_dependencies=ppark-stor-resGreets
Thorsten

Similar Messages

File Adapter - NFS - Windows NT

I am trying to drop file into another server.
Both PI and Target Server are in Windows environment.
From PI Server, I am able to reach target folder from Windows Explorer (
<Target IP>\<folder> )
But when I give the same path in File adapter its shwoing error "Target directory '
<Target IP>\<folder>' does not exist and cannot be created
If I give path as ''C:\folder' , its creating in C drive of PI Server
I mapped the network drive (
<Target IP>\<folder> ) into Z drive and gave the path as "Z:\folder', I am getting the same error does not exist and cannot be created
So how do we give path in file adapter (NFS) for a different target server ?
Any other config required in making target folder as shared ?
Thanks in advance

Hi,
I mapped the network drive ( <Target IP>\<folder> ) into Z drive and gave the path as "Z:\folder', I am getting the same error does not exist and cannot be created.
If you already mapped <IP>\<folder> as the virtual Z drive, then just use Z:\ in your communication channel.
In case this does not work either, you can also use the FTP transfer protocol to access an external server from PI. The name is somehow misleading, because the target server does not have to be an FTP server, it can be any resource, and FTP is just a transmission protocol there.
Hope this helps,
Greg

Can't access some shared files

I have a computer here where the user can't access some shared files. From the machine she normally uses, the folders are greyed out. I've checked all the permissions, and everything is in order. She was even able to access the folder from a different Mac. The mac is fully patched, running OS 10.6.8.

More Info:
After trying multiple things, I have more info to solve the problem. 2 other computers (one is another iBook and the other is a PC) in the house, access the hard drive as advertised with no problems. The only thing that has changed on my computer recently is the replacement of a 1G iPhone with an iPhone 3Gs. This phone did some weird things when syncing, specifically with our photo programs. It locked up Nikon transfer and iPhoto was working strangely. I felt the best way to alleviate those 2 problems was to shut down my computer, and restart. This is when I encountered the problem with accessing the TC. Things are also a little bit more complicated because I use the TC as the storage medium for both iTunes Library and iPhoto Library, both of which I can't access given the current problem.

RH HTML 9-chm file How to change the Shared Path of all images in entire project.

Dear alll,
Previously, I inserted all images to my project from a shared folder with path A. But now I could not access to path A anymore, so I created a folder with the same name in path B which have the same images.
Now I need to update images and I cannot synchronize them from the current folder with path B.
I right-click an image in Project Manager pod, select Properties and then I saw this image has an attribute Shared Path is path A. There is any way to change this Shared Path to path B for all images in the project at a time ?
Anyone experiments it, please help me. Thanks.

Given you posted on the weekend, I would expect everyone to be off doing weekend-y things, rather than work-related things.
I don't use shared resources, but perhaps this topic, specifically the Replace Link entry might help?
http://help.adobe.com/en_US/RoboHelp/9.0/RoboHTML/WS1b49059a33f77726-14df8d3712b0ab9d010-7 ffd.html
Amber

Testing ha-nfs in two node cluster (cannot statvfs /global/nfs: I/O error )

Hi all,
I am testing HA-NFS(Failover) on two node cluster. I have sun fire v240 ,e250 and Netra st a1000/d1000 storage. I have installed Solaris 10 update 6 and cluster packages on both nodes.
I have created one global file system (/dev/did/dsk/d4s7) and mounted as /global/nfs. This file system is accessible form both the nodes. I have configured ha-nfs according to the document, Sun Cluster Data Service for NFS Guide for Solaris, using command line interface.
Logical host is pinging from nfs client. I have mounted there using logical hostname. For testing purpose I have made one machine down. After this step files tem is giving I/O error (server and client). And when I run df command it is showing
df: cannot statvfs /global/nfs: I/O error.
I have configured with following commands.
#clnode status
# mkdir -p /global/nfs
# clresourcegroup create -n test1,test2 -p Pathprefix=/global/nfs rg-nfs
I have added logical hostname,ip address in /etc/hosts
I have commented hosts and rpc lines in /etc/nsswitch.conf
# clreslogicalhostname create -g rg-nfs -h ha-host-1 -N
sc_ipmp0@test1, sc_ipmp0@test2 ha-host-1
# mkdir /global/nfs/SUNW.nfs
Created one file called dfstab.user-home in /global/nfs/SUNW.nfs and that file contains follwing line
share -F nfs –o rw /global/nfs
# clresourcetype register SUNW.nfs
# clresource create -g rg-nfs -t SUNW.nfs ; user-home
# clresourcegroup online -M rg-nfs
Where I went wrong? Can any one provide document on this?
Any help..?
Thanks in advance.

test1# tail -20 /var/adm/messages
Feb 28 22:28:54 testlab5 Cluster.SMF.DR: [ID 344672 daemon.error] Unable to open door descriptor /var/run/rgmd_receptionist_door
Feb 28 22:28:54 testlab5 Cluster.SMF.DR: [ID 801855 daemon.error]
Feb 28 22:28:54 testlab5 Error in scha_cluster_get
Feb 28 22:28:54 testlab5 Cluster.scdpmd: [ID 489913 daemon.notice] The state of the path to device: /dev/did/rdsk/d5s0 has changed to OK
Feb 28 22:28:54 testlab5 Cluster.scdpmd: [ID 489913 daemon.notice] The state of the path to device: /dev/did/rdsk/d6s0 has changed to OK
Feb 28 22:28:58 testlab5 svc.startd[8]: [ID 652011 daemon.warning] svc:/system/cluster/scsymon-srv:default: Method "/usr/cluster/lib/svc/method/svc_scsymon_srv start" failed with exit status 96.
Feb 28 22:28:58 testlab5 svc.startd[8]: [ID 748625 daemon.error] system/cluster/scsymon-srv:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 537175 daemon.notice] CMM: Node e250 (nodeid: 1, incarnation #: 1235752006) has become reachable.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 525628 daemon.notice] CMM: Cluster has reached quorum.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 377347 daemon.notice] CMM: Node e250 (nodeid = 1) is up; new incarnation number = 1235752006.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 377347 daemon.notice] CMM: Node testlab5 (nodeid = 2) is up; new incarnation number = 1235840337.
Feb 28 22:37:15 testlab5 Cluster.CCR: [ID 499775 daemon.notice] resource group rg-nfs added.
Feb 28 22:39:05 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<5>:cmd=<null>:tag=<>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:05 testlab5 Cluster.CCR: [ID 491081 daemon.notice] resource ha-host-1 removed.
Feb 28 22:39:17 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<5>:cmd=<null>:tag=<>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:17 testlab5 Cluster.CCR: [ID 254131 daemon.notice] resource group nfs-rg removed.
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_validate> for resource <ha-host-1>, resource group <rg-nfs>, node <testlab5>, timeout <300> seconds
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_validate>:tag=<rg-nfs.ha-host-1.2>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_validate> completed successfully for resource <ha-host-1>, resource group <rg-nfs>, node <testlab5>, time used: 0% of timeout <300 seconds>
Feb 28 22:39:30 testlab5 Cluster.CCR: [ID 973933 daemon.notice] resource ha-host-1 added.

Windows cannot access the specified device, path, or file.

NOTE: My access is through terminal services.
I received a new server to load my IBM Rational products. I was able to load ClearQuest, Req Pro and ClearCase with no problems. Because this machine is being used as a web interface for the products, I needed to also load Crystal Reports XI along with the embedded report server. Well, I got everything installed but the embedded reports server.
On my attempt to double click on the file that would extract and install the addins needed I received the error message:
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.
After some testing I see that if I select any executable associated with installing an application, I get this error.
I've been searching all over the internet for a solution to this proble. Does anyone know why this happens and what I can do to fix it?

Ok this will be a long post, and for starters I wanted to point something out to everyone - there is two separate discussions going on in this thread. On one side you have a discussion about servers and people using thin clients or Citrix having this error
code and changing Internet Explorer to resolve this conflict. Then on the other side all the stand alone home users with XP and Vista and 7 trying to figure out what is going on with their install that has the exact same error code. Microsoft in their infinite
wisdom has given this error code to relate to multiple different errors hence the confusion.
Now here is my story, with out a resolution yet.
Ok, so I ran into a real nasty trojan virus, that is now resolved and gone. However, when I went into the process of being able to resolve this issue a sticky byproduct was this permissions issue. This is how it happens, I download a video with Firefox or
any browser Opera, IE whatever. Then after I have downloaded it into the proper location I can see it within the downloads list from the browser, should I double click to launch the video with WMV it will fail with that error "Windows cannot access the
specified device, path, or file. You may not have the appropriate permission to access the item". However, should I open the directory and then launch from the true download location, rather in the list of the files within the browser download list it
will launch fine. This is the problem I can utilize the programs directly launching them from explorer, however should I try and launch a program from inside another program it will fail to launch.
This is a Vista 64 bit installation, and I am pretty tech savvy individual. What I have tried thus far is to take owner ship of the directory since trusted installer was the owner previously. After I had done that I went into the permissions of the exe and
sought to make sure that the file was open for everyone to be able to modify and have full control - it was. After that I also tried launching the browsers as admin privileges to see if it would still launch. It will not it refuses to allow calls to this directory.
That being said it is also a big problem when I use Corel DVD Moviefactory, because this program is trying to launch other programs from this directory to run. So, I need to figure out why is it that I am not able to have programs make calls to this directory
and try and launch exe files and fail, yet the permissions are fine and I can launch them from directly clicking on the item in a directory?
Further clarification as to what happens:
Firefox downloads to Harvester\downloads
All my pictures, movies, executable, rar/zip, reside in this directory "downloads"
In the browser Firefox there is a "downloads" [contrl+J] list that shows what you have downloaded through the browser
All of these items are able to double click and execute from this list with out having to navigate to the "downloads" directory
When executing a WMV file it will fail and error out with the "Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item" error.
However, navigating to this directory will allow me to launch all programs with out any problem, the difference is I am launching from the file rather than through a program making a call to the x86 directory to launch the file. If I have an item that doesn't
require a program to launch from the x86 directory it will launch ok through Firefox, ex InfanView, HJsplit, etc.
This is a problem with other programs making calls to external programs residing in the x86 directory like Corel Moviefactory 7. While running it will make the same error "Windows cannot access the specified device, path, or file. You may not have the
appropriate permission to access the item" when trying to make a new DVD, because it utilizes something in that directory an external program.
This happens with Opera as well, don't know about IE I don't use it.
What I have done thus far:
Removed my firewall that was MS native firewall
Removed my anti-virus and malware software - AVG, MalwareBytes, Windows Defender, Windows Security Essentials, Spybot Search and Destroy, Spy cop, and a few others
Went and took ownership of the directory
Tried registry hacks
Altered AVG to exclude the (x86) directory
Re-installed AVG and MalwareBytes to see if I can repair the file
Shared the (x86) directory for everyone and inherited the permissions
Tried CLI restoring of default permissions
Tried to make changes in safe mode still shut down.
This is where I am now....waiting for a scan to end to reboot and check to see if I was able to make any progress.

IMOVIE 10.0.2 - Shared it via file then sent that to my iPhone ; the 13ses movie is OUT OF FOCUS ! HELP

IMOVIE 10.0.2 - I created a short movie and sharing it via file then sending it to my phone ! however once my iPhone receives it and I watch the movie on my iPhone its out of focus and blurry ! I been trying to figure out why and fix the problem !

Hey, Clinton,
     Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
     1. Open iMovie 9 (finder/applications/iMovie 9.0.9
     2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3. Close iMovie 9
     4. Open iMovie 10 (probably in the dock)
     5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
     6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me!

File globals scope?

I would like to have some of my File Globals shared across multiple executions while others are execution specific. Is it possible to accomplish this using the Advanced properties flag (PropFlag_Shared?) for the specific variables I would like to be common?

Scott -
Sorry about that. The sequence editor assumes that a variable that is marked as shared is a type. We limit users in this way because if users edit a shared property in a step instance, it would edit the type definition itself.
In your case there is no type but the sequence editor incorrectly limits you. I have written up a problem on this behavior internally.
Since shared-at-runtime does not work as we discussed and you want to still use shared, you will have to unshare the property before editing its value. Unfortuneately, the sequence editor may not allow you to edit the flags because it is shared. Instead of using the Advanced button on the Properties dialog box to edit the flags, you can use the shortc
ut Ctrl-Shift-F1 to open the dialog directly.
Keep in mind that we never considered someone wanting to share individual file globals as you are doing. We will consider supporting this in the future better.
I hope this helps...
Scott Richardson
Scott Richardson
National Instruments

Accesing a shared path through URL

Hi All,
I have a specific request. I have an SSRS report. The report has a file shared path as url in one of the field.
My requirement is: User x is viewing the report. On clicking the link, he will be accessing the shared path as a different credential (a common credential).
Is it possible to have this in SSRS? Can anybody throw some light on this requirement
Thanks,
Vishy

According to the post of the error, the wrong domain name is specified for the service:
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:bxt1
But you said the accounts were: "They
are both part of the infosix.root domain"
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

Windows Cannot Access Specific Device, Path or File While Using Adobe Reader XI, Version 11.0.06

Hello,
Recently, I have been experiencing a minor problem with the Adobe Reader XI Program loaded on my computer. When clicking the data fields on PDF versions of various forms to enter numerical or text information, a dialogue box with a small white X in a red circle on the left side of the title bar pops open and is titled:
C:\Program Files\Common Files\microsoft shared\ink\TabTip.exe
There is another white X in a red circle symbol displayed in the message field of the dialogue box along with the following message:
Windows cannot access the specific device, path, or file. You may not have the appropriate permissions to access the item.
There is also an “OK” Button displayed on the right side of the lower margin of the dialogue box.
Although the dialogue box is repeatedly displayed whenever I click on a data field, the program still allows me to enter and save the numerical and text information that is entered in each data field.
My computer is a Hewlett-Packard Envy 23-d034 TouchSmart All-In-One Desktop Personal Computer with a Windows 8.1 Operating System that has all applicable Important and Recommended Windows Updates installed. The Adobe Reader XI Program is the latest version, Version 11.0.06, and I have confirmed that there are no updates for the program at this time.
Could you suggest any recommended actions to correct this problem with the Adobe Reader XI Program?

unfortunately no. i have a problem in my computer that doesn't let me do that.
this is th entire message though and it appears on the background of the program trying to load. all you can see is the frame of Rreader, and immediatly after that it shuts down

Path and file name to long

Hi
I have a schema with a deep hierarchy that I am running xmlbeans on. Initially
it failed to build because it couldn't find some of the class files it had generated.
It turned out that the path and filename was too long for Windows XP to handle
and moving the directory I was running the buiild to the root directory allowed
the build to complete. Unfortunately I have another schema which includes the
first one. It also has quite a long namespace. Is there any way of changing the
filename convention of the class files so that it doesn't use the XML node hierarchy
for its names?
If not it puts a serious limit on its use with real world schemas.
Andy

On Fri, 14 Nov 2003 01:24:39 -0700, Andy Brown wrote:
>
Hi
I have a schema with a deep hierarchy that I am running xmlbeans on. Initially
it failed to build because it couldn't find some of the class files it had generated.
It turned out that the path and filename was too long for Windows XP to handle
and moving the directory I was running the buiild to the root directory allowed
the build to complete. Unfortunately I have another schema which includes the
first one. It also has quite a long namespace. Is there any way of changing the
filename convention of the class files so that it doesn't use the XML node hierarchy
for its names?
If not it puts a serious limit on its use with real world schemas.
AndyAndy,
This topic in the workshop help demonstrates how to do some simple mapping
from namespaces -> package names and from xsd names -> java names.
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/howdoi/howGuideXMLBeansTypeNaming.html?skipReload=true
hope that helps!
-- kevin krouse

How to read the complete path in file upload UI

Hi,
I want to know how to read the complete path in file upload UI in java web dynpro.
I have created 1 file upload UI and than when i do browse and select some file say small.jpg from my local PC, desktop , its path is coming in file upload UI like E:\small.jpg,
I want to know how to get this path in java webdynpro code.
please let me know..

Hi Satyam,
In webdynpro java, first file stores in server location then it reads from server.
Create a button with upload and write this code OnAction
Resource is the attribute name in context of type com.sap.ide.webdynpro.uielementdefinitions.Resource, this attribute is for Resource property for Upload UI Element.
Then in OnAction of button
InputStream text = null;
       int temp=0;
       try{
            File file = new File(wdContext.currentContextElement().getResource().getResourceName().toString());
           String path = file.getAbsolutePath();
            wdComponentAPI.getMessageManager().reportSuccess(path);
       }catch(Exception e){
            e.printStackTrace();
    //@@end
Regards,
Pradeep
Edited by: pradeep_546 on May 11, 2011 12:22 PM

Definnig logical path and file names

hallow experts,
i wont to now about definnig logical path and file names,
did some one have something that can help me in that
regards

Hi Rodrigo,
Have a look at this link... i guess it explains what you are looking for...
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm
regards,
Naveen

Itunes can't run because some of its required files are missing. please reinstall itunes.

I have an old Ipod nano, with great music on it, however no pc to sync it to and I dont want to lose the music. I downloaded itunes 10.0 (most recent) and was trying to use yamipod to get the music from it, however it says that it works best with older version of itunes. so i uninstalled new itunes, tried to install older version, had issues, uninstalled all apple programs from pc, now when i try to install older version of itunes i get the error message:
itunes cant run because some of its required files are mising. please re-install itunes....which i tried several times and still keep getting this error message...HELP

No, that did not work. I did a system restore on my computer, and then that's why my iTunes reverted back to version 6. Whenever I try to download the newer version, it keeps giving me this error message:
The feature you are trying to use is on a network resource that is unavailable.
And then I will just click 'OK.' Then this will come up:
The path 'C:\DOCUME~1\HP_Owner\LOCALS~1\Temp\IXP705.TMP\iTunes.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
I just don't know what to do. Please...more feedback!!!

Some shared paths in file /global/nfs/SUNW.nfs/dfstab.nfs-res are invalid

Similar Messages

Maybe you are looking for