Some strange with the WSDL generated during asadmin deploy

Hi devs and users,
I'have created WebService with @WebServices annotation,
packaged and deploy it with asadmin.
When accessing the WSDL via
http://192.168.1.1:8080/test/TestService?WSDL
the WSDL contain something like this:
<types>
<xsd:schema>
<xsd:import namespace="http://xyz/"
schemaLocation="http://testserver:8080/test/TestService/__container$publishing$subctx/WEB-INF/wsdl/TestService_schema1.xsd"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"/>
</xsd:schema>
</types>
<service name="NotificationSystemService">
<port name="NotificationSystemPort" binding="tns:NotificationSystemPortBinding">
<soap:address
location="http://testserver:8080/test/TestService"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"/>
</port>
</service>
Note that, the soap:address and schemaLocation use the hostname 'testserver', but not the ip address '192.168.1.1'.
How can I control the AS so that, when it generate the WSDL, it use the host address, instead of the hostname.

Apple does not participate in these forums, so you will not get a reply from an Apple engineer, nor will there be any way for you to contact anyone in the iTunes or iOS engineering team.
I do not, however, think that there is any difference between the Mac and Windows versions of iTunes in what information they transmit to Apple's services. In either version no personal information of any sort is sent when only doing an update to iOS, only to the best of my knowledge the device identification so that the correct update file can be delivered. The only time any of your contacts or any other such information would be sent to Apple's servers is if you are synchronizing via iCloud, and emails only if you use iCloud's email service.
My understanding is that user generated data, settings and apps are handled entirely with the backup file if ones is created?
Except for synchronizing with iCloud, that would be correct. This may be of interest:
http://support.apple.com/kb/HT4865
Regards.

Similar Messages

Need some help with the Table Function Operator

I'm on OWB 10gR2 for Sun/Solaris 10 going against some 10gR2 DB's...
I've been searching up and down trying to figure out how to make OWB use a Table Function (TF) which will JOIN with another table; allowing a column of the joined table to be a parameter in to the TF. I can't seem to get it to work. I'm able to get this to work in regular SQL, though. Here's the setup:
-- Source Table:
DROP TABLE "ZZZ_ROOM_MASTER_EX";
CREATE TABLE "ZZZ_ROOM_MASTER_EX"
( "ID" NUMBER(8,0),
"ROOM_NUMBER" VARCHAR2(200),
"FEATURES" VARCHAR2(4000)
-- Example Data:
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (1,'Room 1',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (2,'Room 2',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (3,'Room 3','1,1;2,3;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (4,'Room 4','5,2;5,4;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (5,'Room 5',' ');
-- Destination Table:
DROP TABLE "ZZZ_ROOM_FEATURES_EX";
CREATE TABLE "ZZZ_ROOM_FEATURES_EX"
( "ROOM_NUMBER" VARCHAR2(200),
"FEATUREID" NUMBER(8,0),
"QUANTITY" NUMBER(8,0)
-- Types for output table:
CREATE OR REPLACE TYPE FK_Row_EX AS OBJECT
ID NUMBER(8,0),
QUANTITY NUMBER(8,0)
CREATE OR REPLACE TYPE FK_Table_EX AS TABLE OF FK_Row_EX;
-- Package Dec:
CREATE OR REPLACE
PACKAGE ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX;
END ZZZ_SANDBOX_EX;
-- Package Body:
CREATE OR REPLACE
PACKAGE BODY ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX
AS
RETURN_VALUE FK_Table_EX := FK_Table_EX();
i NUMBER(8,0) := 0;
BEGIN
-- TODO: Put some real code in here that will actually read the
-- input string, parse it out, and put data in to RETURN_VALUE
WHILE(i < 3) LOOP
RETURN_VALUE.EXTEND;
RETURN_VALUE(RETURN_VALUE.LAST) := FK_Row_EX(4, 5);
i := i + 1;
END LOOP;
RETURN RETURN_VALUE;
END UNFK;
END ZZZ_SANDBOX_EX;
I've got a source system built by lazy DBA's and app developers who decided to store foreign keys for many-to-many relationships as delimited structures in driving tables. I need to build a generic table function to parse this data and return it as an actual table. In my example code, I don't actually have the parsing part written yet (I need to see how many different formats the source system uses first) so I just threw in some stub code to generate a few rows of 4's and 5's to return.
I can get the data from my source table to my destination table using the following SQL statement:
-- from source table joined with table function
INSERT INTO ZZZ_ROOM_FEATURES_EX(
ROOM_NUMBER,
FEATUREID,
QUANTITY)
SELECT
ZZZ_ROOM_MASTER_EX.ROOM_NUMBER,
UNFK.ID,
UNFK.QUANTITY
FROM
ZZZ_ROOM_MASTER_EX,
TABLE(ZZZ_SANDBOX_EX.UNFK(ZZZ_ROOM_MASTER_EX.FEATURES)) UNFK
Now, the big question is--how do I do this from OWB? I've tried several different variations of my function and settings in OWB to see if I can build a single SELECT statement which joins a regular table with a table function--but none of them seem to work, I end up getting SQL generated that won't compile because it doesn't see the source table right:
INSERT
/*+ APPEND PARALLEL("ZZZ_ROOM_FEATURES_EX") */
INTO
"ZZZ_ROOM_FEATURES_EX"
("ROOM_NUMBER",
"FEATUREID",
"QUANTITY")
(SELECT
"ZZZ_ROOM_MASTER_EX"."ROOM_NUMBER" "ROOM_NUMBER",
"INGRP2"."ID" "ID_1",
"INGRP2"."QUANTITY" "QUANTITY"
FROM
(SELECT
"UNFK"."ID" "ID",
"UNFK"."QUANTITY" "QUANTITY"
FROM
TABLE ( "ZZZ_SANDBOX_EX"."UNFK2" ("ZZZ_ROOM_MASTER_EX"."FEATURES")) "UNFK") "INGRP2",
"ZZZ_ROOM_MASTER_EX" "ZZZ_ROOM_MASTER_EX"
As you can see, it's trying to create a sub-query in the FROM clause--causing it to just ask for "ZZZ_ROOM_MASTER_EX"."FEATURES" as an input--which isn't available because it's outside of the sub-query!
Is this some kind of bug with the code generator or am I doing something seriously wrong here? Any help will be greatly appreciated!

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem. How do I stop that from happening?

For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem. How do I stop that from happening? I keep having to delete my library!

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

How do I Add Authentication to the WSDL generated?

Hi Experts,
I am creating web service in CAF to get All task assigned to a user using BPM API.
The WSDL generated while testing from wsnavigator is picking up as a guest user even if I am entering the user details in invocation parameters.
Can some one tell me how do I add authentication to the WSDL I have generated in CAF?
Thanks in Advance
Kumar.

Hi Kumar,
You Can find the above Section in : Go to http://hostname:port/nwa and open Configuration--->Connectivity --> Single Service Administration and open Service Definitions tab and select the application service for which you want to create the Authentication.
Cheers
Piyas

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

What's wrong with the wsdl

We are trying to create a proxy from the following wsdl file and getting an error message: illegal syntax: API:Parameter BINDING has initial value
The webservice that we are trying to consume is from TIBCO .
Can someone please help me to find out what's wrong with the wsdl.
<?xml version = "1.0" encoding = "UTF-8"?>

<wsdl:definitions name = "Untitled" targetNamespace = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:soap = "http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:xs = "http://www.w3.org/2001/XMLSchema">
     <wsdl:types/>
     <wsdl:service name = "TIBCO__ABAP">
          <wsdl:port binding = "tns:SOAPEventSourceBinding" name = "SOAPEventSource">
               <soap:address location = "http://192.168.9.58:10001/TIBCO_ABAP"/>
          </wsdl:port>
     </wsdl:service>
     <wsdl:portType name = "PortType">
          <wsdl:operation name = "Operation">
               <wsdl:input message = "tns:Input"/>
               <wsdl:output message = "tns:Output"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name = "SOAPEventSourceBinding" type = "tns:PortType">
          <soap:binding style = "document" transport = "http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name = "Operation">
               <soap:operation soapAction = "http://192.168.9.58:10001/TIBCO_ABAP" style = "document"/>
               <wsdl:input>
        <soap:body use="literal" />
      </wsdl:input>
               <wsdl:output>
        <soap:body use="literal" />
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:message name = "Input">
          <wsdl:part name = "Param1" type = "xs:int"/>
          <wsdl:part name = "Param2" type = "xs:int"/>
     </wsdl:message>
     <wsdl:message name = "Output">
          <wsdl:part name = "Result" type = "xs:int"/>
     </wsdl:message>
</wsdl:definitions>

Léon Hoeneveld's response works for me. You will need to download a tool that allows you to edit the WSDL and reorder the values.
I've used a freeware tool like notepad++ collapsed all the levels and opened up the <wsdl:definitions xmlns:wsdl... segment and reordered the subgroups beneath it accordingly.
1. types
2. message
3. portType
4. binding
5. service
Thanks again Léon!

Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

Hi All,
Need some urgent help..
Iam facing some issue with the Function Module 'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system.
As shown below, in the function module, the Table IT_PROPERTIES_RESULT gets populated with some values based on inputs like IT_CLASSES, IT_QUERY, and L.
This updation of IT_PROPERTIES_RESULT table is happening for some of the services sent through IT_QUERY and is not getting populated for some.
call function 'SKWF_FIND_BY_QUERY
exporting
CONNECTION_SPACE         =
    OBJ_TYPE                 = 'L'
PTYPE                    =
X_STRICT                 =
IMPORTING
ERROR                    =
     tables
     CLASSES                  = IT_CLASSES
     QUERIES                  = IT_QUERY
     RESULT_OBJECTS           = IT_LOIO
PROPERTIES_REQUEST       = PROPERTIES_RESULT        = IT_PROPERTIES_RESULT.
The values are as follows:-
Values getting populated in IT_CLASSES BW_LO_TRAN               Values getting populated in IT_QUERY 1) BW_QUERY, 2) /BIC/ZSERVICE
I would like to know whether any Standard Customizing BW transaction is present that is maintaining IT_PROPERTIES_RESULT table properties and fetching through this Function Module.
Also, suggest how this issue can be resolved
Thanks & Regards,
Shailesh nagar

Thanks Suhas. That definitely helped.
Also the following links helped.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/1c8c3e94243446e10000000a114084/frameset.htm
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Cheers,
Preethi

How to encrypt column of some table with the single method on oracle7/814?

How to encrypt column of some table with the single method on oracle7/814?

How to encrypt column of some table with the single method on oracle7/814?

How to encrypt column of some table with the single method ?

How to encrypt column of some table with the single method ?

How to encrypt column of some table with the single
method ?How to encrypt column of some table with the single
method ?
using dbms_crypto package
Assumption: TE is a user in oracle 10g
we have a table need encrypt a column, this column SYSDBA can not look at, it's credit card number.
tha table is
SQL> desc TE.temp_sales
Name Null? Type
CUST_CREDIT_ID NOT NULL NUMBER
CARD_TYPE VARCHAR2(10)
CARD_NUMBER NUMBER
EXPIRY_DATE DATE
CUST_ID NUMBER
1. grant execute on dbms_crypto to te;
2. Create a table with a encrypted columns
SQL> CREATE TABLE te.customer_credit_info(
2 cust_credit_id number
3      CONSTRAINT pk_te_cust_cred PRIMARY KEY
4      USING INDEX TABLESPACE indx
5      enable validate,
6 card_type varchar2(10)
7      constraint te_cust_cred_type_chk check ( upper(card_type) in ('DINERS','AMEX','VISA','MC') ),
8 card_number blob,
9 expiry_date date,
10 cust_id number
11      constraint fk_te_cust_credit_to_cust references te.customer(cust_id) deferrable
12 )
13 storage (initial 50k next 50k pctincrease 0 minextents 1 maxextents 50)
14 tablespace userdata_Lm;
Table created.
SQL> CREATE SEQUENCE te.customers_cred_info_id
2 START WITH 1
3 INCREMENT BY 1
4 NOCACHE
5 NOCYCLE;
Sequence created.
Note: Credit card number is blob data type. It will be encrypted.
3. Loading data encrypt the credit card number
truncate table TE.customer_credit_info;
DECLARE
input_string VARCHAR2(16) := '';
raw_input RAW(128) := UTL_RAW.CAST_TO_RAW(CONVERT(input_string,'AL32UTF8','US7ASCII'));
key_string VARCHAR2(8) := 'AsDf!2#4';
raw_key RAW(128) := UTL_RAW.CAST_TO_RAW(CONVERT(key_string,'AL32UTF8','US7ASCII'));
encrypted_raw RAW(2048);
encrypted_string VARCHAR2(2048);
BEGIN
for cred_record in (select upper(CREDIT_CARD) as CREDIT_CARD,
CREDIT_CARD_EXP_DATE,
to_char(CREDIT_CARD_NUMBER) as CREDIT_CARD_NUMBER,
CUST_ID
from TE.temp_sales) loop
dbms_output.put_line('type:' || cred_record.credit_card || 'exp_date:' || cred_record.CREDIT_CARD_EXP_DATE);
dbms_output.put_line('number:' || cred_record.CREDIT_CARD_NUMBER);
input_string := cred_record.CREDIT_CARD_NUMBER;
raw_input := UTL_RAW.CAST_TO_RAW(CONVERT(input_string,'AL32UTF8','US7ASCII'));
dbms_output.put_line('> Input String: ' || CONVERT(UTL_RAW.CAST_TO_VARCHAR2(raw_input),'US7ASCII','AL32UTF8'));
encrypted_raw := dbms_crypto.Encrypt(
src => raw_input,
typ => DBMS_CRYPTO.DES_CBC_PKCS5,
key => raw_key);
encrypted_string := rawtohex(UTL_RAW.CAST_TO_RAW(encrypted_raw)) ;
dbms_output.put_line('> Encrypted hex value : ' || encrypted_string );
insert into TE.customer_credit_info values
(TE.customers_cred_info_id.nextval,
cred_record.credit_card,
encrypted_raw,
cred_record.CREDIT_CARD_EXP_DATE,
cred_record.CUST_ID);
end loop;
commit;
end;
4. Check credit card number script
DECLARE
input_string VARCHAR2(16) := '';
raw_input RAW(128) := UTL_RAW.CAST_TO_RAW(CONVERT(input_string,'AL32UTF8','US7ASCII'));
key_string VARCHAR2(8) := 'AsDf!2#4';
raw_key RAW(128) := UTL_RAW.CAST_TO_RAW(CONVERT(key_string,'AL32UTF8','US7ASCII'));
encrypted_raw RAW(2048);
encrypted_string VARCHAR2(2048);
decrypted_raw RAW(2048);
decrypted_string VARCHAR2(2048);
cursor cursor_cust_cred is select CUST_CREDIT_ID, CARD_TYPE, CARD_NUMBER, EXPIRY_DATE, CUST_ID
from TE.customer_credit_info order by CUST_CREDIT_ID;
v_id customer_credit_info.CUST_CREDIT_ID%type;
v_type customer_credit_info.CARD_TYPE%type;
v_EXPIRY_DATE customer_credit_info.EXPIRY_DATE%type;
v_CUST_ID customer_credit_info.CUST_ID%type;
BEGIN
dbms_output.put_line('ID Type Number Expiry_date cust_id');
dbms_output.put_line('-----------------------------------------------------');
open cursor_cust_cred;
loop
     fetch cursor_cust_cred into v_id, v_type, encrypted_raw, v_expiry_date, v_cust_id;
exit when cursor_cust_cred%notfound;
decrypted_raw := dbms_crypto.Decrypt(
src => encrypted_raw,
typ => DBMS_CRYPTO.DES_CBC_PKCS5,
key => raw_key);
decrypted_string := CONVERT(UTL_RAW.CAST_TO_VARCHAR2(decrypted_raw),'US7ASCII','AL32UTF8');
dbms_output.put_line(V_ID ||' ' ||
V_TYPE ||' ' ||
decrypted_string || ' ' ||
v_EXPIRY_DATE || ' ' ||
v_CUST_ID);
end loop;
close cursor_cust_cred;
commit;
end;
/

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

I have some trouble With the graph XY, if I display a curve and try to zoom on it, it may be corrupted, or may disappeared.

In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
Does anybody have seen that kind of trouble ?

> I have some trouble With the graph XY, if I display a curve and try to
> zoom on it, it may be corrupted, or may disappeared.
>
I think what you are describing is not due to video driver, but rather
to the way the graph works. The LV graph maps points to integer screen
coordinates and draws lines be tween those point. When the numbers are
way to large to fit on the screen, the numbers are pinned to a special
large value. When this happenson one axis but not the other, it causes
the slope of the line to change and potentially not cross the screen.
If this is the same effect I'm describing, it only takes place when you
zoom into the data by a large extent, pushing the other points about ten
to fifteen monitors away. At this point you are no longer
looking at
measured data, but rather just on the interpolation of a line between
two points. The solution if you must have one is to resample your data
on the diagram to contain more points.
Greg McKaskle

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data

why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.

ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport

HT204053 Hi i was living in australia for a while and bought some stuff with the australian itunes. Now i'm back in the uk i cant re-download them. Can anyone help?

Hi i was living in australia for a while and bought some stuff with the australian itunes. Now i'm back in the uk i cant re-download them. Can anyone help?

Welcome to the Apple Community.
Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support.

Some strange with the WSDL generated during asadmin deploy

Similar Messages

Maybe you are looking for