Some User Tips (January 2012)

This assumes iTunes 10.5.2, as this is the current version as of this writing.  Doing a brain-dump of some of the more common questions that have come up, and the ones I've personally tested.
1) I'm stuck at StepX / it's taking a long time to complete.
This is probably the most common question I've seen here.   There seems to be a few factors as to how long it takes the Matching process to complete:
1- Your library size. Self-explanatory - the bigger the library, the longer the process will take.
2- How many uploads you end up having.   This is harder to gauge, but if you end up with a lot of uploads, it will take a lot longer for the process to complete.  If you have a lot of albums that you know do not exist on iTunes, or a lot of old CD's that have since been remastered (see bullet 2) then it's a good guess that the process will take longer.
3- Your ISP's upload speed.  If you have a lot of uploads, the speed to complete will be directly related to your ISP's upload speed.   This is a second number they give you - so, for example, if your ISP's numbers are 15/2, it's 15Mbps down and 2Mbps up.  That's 250KB/sec up, which is at best ~850MB per hour.   So, assuming a large number of uploads, this could take quite a while to complete.
4- Overloading on the iTunes server infrastructure.  This doesn't seem to be as much of a problem as of this writing.   But when the service was initially rolled out in the US, and also in other countries, it was definitely a major factor.  Whenever there's a new iTunes version or if a new country is added, I would expect potential issues for a few days.   Also, I would check the iCloud Status page before running an initial Match -- http://www.apple.com/support/icloud/systemstatus/
2) Why is my very common artist CD rip not matching 100%?
There are many theories about this, but I believe the most likely reason for most common CD's not matching is mastering.  You've probably seen the term "re-mastered" alot, but what it essentially means is that the sound engineers have gone back to the original masters and tweaked the sound in certain ways.   Now since iTunes Match is primarily doing waveform analysis for matching, these slight variations between a CD master and whatever master iTunes is using could throw off the matching process enough to make it an upload, instead.
The Beatles' "She Came in Through the Bathroom Window" is a perfect example of this.  The version the older 80's CD does not match, but the 2009 remaster does match.  I'm convinced that it's because the iTunes database has the 2009 master and that there are enough differences between the two versions that the matching process is thrown off.
3) I don't want an album to Match, I actually want it to Upload.  Is there are way to force an upload?
Not as of this writing (Jan 2012).   I've requested a "force upload" option already and I would recommend that everyone do the same.   An example of this is the Beatles in Mono - some of those tracks end up matching with stereo versions, which you may not want.
You could also do some very tedious waveform changes in a sound editing tool to alter them enough to force an upload, but it's really not feasible to do this on a mass scale.
4) My song Matched, but it's still showing as 128kps in iTunes.  Where's my 256kps version?
It's in iCloud, but because iTunes does not delete your local version, you see that local version by default.  Some people dislike this, but I think it's a good compromise as if gives the user the option to either keep all their local music intact or to delete them manually later.   It's up to you.  When you delete a song post-Match, you'll see an option to delete the iCloud version.  If you choose not to delete that version, which is the default, then only your local copy is deleted and you are left with the iCloud version only.
Also, I would recommend enabling the "iCloud Status" column, in your Album List.  It's very helpful to visualize what the status is of your songs.  And here's a guide to what the icons mean:   http://support.apple.com/kb/ts4124
5) Once the Match process completes, can I delete all my local music on my PC?
This question comes up a lot for some reason, so I added it here.  The answer is that yes, you can delete your local files once they are in iCloud.  But the question you should really be asking yourself is "should I?".   The reason why I mention this are that there have been many reports of mis-matched files -- explicit tracks becoming clean tracks, mono tracks becoming stereo tracks, live tracks becoming studio tracks etc.   In my opinion, it's still a good idea to have your original files backed up somewhere locally, like an external hard drive.  But again it's completely up to you.
6) I have some vinyl and cassettes that I've ripped to MP3's - will these work with iTunes Match?
I have tested both and, imo, you should NOT expect a high success rate with these rips.   There are a lot of factors in play and results definitely vary - in my case, I've found that things like pitch and speed have a direct impact on matching, so if your tape player or turntable belt is not locked in the right pitch your results will suffer.  Also you need to match the start and end silence with whatever is used in iTunes, which can be a very tedious process with a lot of trial and error.
Overall, I'd say that if you are trying to match vinyl / cassettes as just a supplement to your main CD rips, it might be worth trying.  But if vinyl / cassette matching is your main reason for getting the service, then you will likely be disappointed.
7) Is there a way to get around the 25K library limit?
As of this writing, the only workaround is to create separate libraries.  This will at least allow the Matching process to run, if the library in question is smaller than 25K songs.  But you still have an overall 25K limit (sans purchased tracks) in iCloud itself.
8) It says I can have up to 10 devices, but I'm getting a "5 Authorized Computers maximum" error.
You can have up to 10 devices, but only up to 5 computers.   That sounds a little confusing, but think of it this way -- a system with iTunes is a "computer" as well as a "device", but an iOS system is only a "device".   So you can't have more than 5 computers using iCloud, the rest would need to be iOS devices before you reach the overall max limit of 10.
9) My files are showing up as "ineligible".
Check your file format, your kps rate and file sizes, as there are some limitations.  You can find more details here:  http://support.apple.com/kb/ts4054
10) I'm not satisfied with this service - can I cancel?
The answer is "most likely no".  In the Terms of Service, it mentions that the service is not refundable.  But, If you feel that the service is not doing what's been advertised, I would suggest calling them and stating your case - there have been reports of some people getting a refund, if their concerns are deemed justified. 
One caveat however, and something the rep may not tell you : If you do manage to secure a refund, you are not permitted to re-subscribe for one year.  So if the services gets an upgrade later that actually corrects issues that caused you to initially cancel, you might have to wait it out to try it out again.
11) Where are the other Apple iTunes Match support docs?
check out this excellent post from JiminMissouri -- https://discussions.apple.com/thread/3619849
Hope this helps!

SteedGun wrote:
Good information but the service just stinks.  I have been at this for 5 days.  I have 2269 tracks and Match is locked at 1840 and has been locked there for days!  After multiple reboots, restarts, etc.  This is the worst Apple solution in 25 years.  I go back all the way to the original Mac.  Either they have not provisioned enough bandwidth or they just have flaws.  Either way they had better get it fixed soon or this one will give them a big BLACK EYE!
I believe my comment in section 1.4 (about new countries being rolled out) is definitely a factor with the current issues.  I literally saw the service go from speedy to completely borked, about 36 hours ago.  

Similar Messages

  • How to prolong hard drive life on a MBP i7? + Some User tips

    As well as the must-do's and must-not's. I know it it is bad to have the macbook pro on the laps though I would like to know why..

    You can follow the instructions here to copy your installation disc over to a USB jump drive: http://lifehacker.com/5347382/wintoflash-turns-your-windows-installation-dvd-int o-a-usb+based-installer

  • RDS 2012 R2 - Allow Some Users Multiple Logon Sessions and Restrict Other Users to a Single Session

    In Server 2012 R2 RDS, is there a way to allow some users to log on multiple times, but restrict other users to a single logon? On an OU or AD group basis?
    I know there is a GPO setting under Computer Configuration for restricting users to a single logon, but this does not allow me to differentiate on a user basis (only on a per server basis).
    Thanks,
    James

    Hi James,
    From my perspective and knowledge, sorry to say but there is no such option\way to provide this permission at same time. If a user specifies a different program to start when the user connects to the RD Session Host server, a new session will be created on
    the RD Session Host server for the user, even if the RD Session Host server is configured to restrict users to a single session. A user can specify a program to start on connection on the Programs tab under Options in Remote Desktop Connection.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • SSRS 2012 some users are not able to edit reports in the server

    Hello All,
    I am install reporting services SharePoint native mode but some users are not able to edit reports on server error is "Application cannot be started contact your application vendor" but this users edit reports on their client machine
    using report builder 3.0.
    Please help me

    Hi harshad_mule,
    Because Report Builder in the Report Manager is a ClickOnce application, the error message means that one or more of the files listed in the application manifest cannot be found on the server, so the application cannot be started. Based on my research, frequently
    this means that the application is somehow corrupted, or that the ClickOnce store is corrupted.
    To fix this issue, we can try to refer to the following steps:
    If Report Builder is corrupted, we can update the Reporting Services to repair this.
    Check that the Report Builder application is existing
        Open the Report Server folder. By default, the folder is located in: C:\Program Files\Microsoft SQL Server\MSSQL.<X>\Reporting Services\ReportServer\ReportBuilder
        Make sure the file "ReportBuilder.application" is existing in the folder mentioned above.
    If it is existing, please use the following URL to access the Report Builder directly:
    http://<server>/ReportServer/ReportBuilder/ReportBuilder.application
    And this issue can also be caused by browser. Because not all report functionality is supported by all browsers in Reporting Services. So please use IE browser to start Report Builder to try it again.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Sharepoint Foundation - search working for some users (or computers), but not others

    Hi all,
    We have doozy of a search problem with SharePoint Foundation 2010 that I'm hoping someone can help with.
    We have an application that is listening on port 14197 and search is working just fine, but only for one or two users.
    If I do a search while logged in using the account we set the application up with then the search works fine and it returns records as expected.
    If I use a different account - one that has full control over the app, then the exact same search fails with the following message:
    We did not find any results for 06BSL.
    Suggestions:
    Ensure words are spelled correctly.
    Try using synonyms or related searches.
    Try broadening your search by searching from a different site.
    Additional resources:
    Get additional search tips by visiting Search Help
    If you cannot find a page that you know exists, contact your administrator.
    We've done everything we can think of, including several procedures to create new search accounts, replace databases, etc.
    Nothing has helped and all of the info we can find online is in relation to getting search working when it doesn't work at all.  In our case it is working, but only for some users.  We thought it might have been a permissions issue, but not matter
    what permissions we seem to give to test accounts they still don't work.  We've set up a test account, for example, that is a member of the 'application owners' group, but cannot produce any search results with it.
    The SharePoint Foundation server is running on Windows 2008 Server Foundation, with a separate SBS 2003 DC.  
    Any help most appreciated.

    Hi Alex, thanks for your response and apologies about the late reply - didn't realise someone had responded until now!
    Agreed that this looks like a permissions issue, but we're stumped as to what it could be.  The 'test' account displays this problem - if we try and search on 06BSL
    we get no results, but it does appear that this account has full control over this document (see below).
    Note that the 'Manage Permissions' page presents a comment 'This list item inherits permissions from its parent. (Customer QA & Product Management)' which is what we're
    expecting.
    The indexing schedule is set to 5 minutes. 
    Appreciate your help with this, as we've spent a huge amount of time on this problem but don't seem to be any closer to a resolution.
    Cheers,
    Damian
    Check permissions result (this result is the same for the list or for the document itself):
    Permission levels given to test (DOMAIN\test)
    Full Control
    Given through the "QA Application Owners" group.
    Design, Contribute, Read
    Given through the "QA Application Members" group. 

  • Installed mavericks server and now some users don't have access to folders!? Why and how do I fix it???

    I have just upgraded the server and os to mavericks and now users that used to be able to open and save or even log in are now locked out with the server saying wrong password. I reset their password and still nothing. I created a new user and they can't even log in? Why now? And how do I fix this. It seems that some users and groups now don't have access and all that was done was to let the group open a shared folder that they have access before. I reset everything and am now very frustrated!!!

    Hi
    Seem to be an issue with Maverick
    After trying to solve the issue with all tips i found here and on the net
    I decided to go back to Mountain Lion for my server using TimeMachine backup, and stay with Maverick for my imacs
    Work well again
    Until Apple will communicate on it or deliver a patch, i would suggest to do the same

  • User Tip: MBPr + USB issue and how to recover hard drives.

    I did want to share this in case someone runs into this problem:
    Since I bought this MPBr in June it has "destroyed" my external USB drives on at least 7 ocassions. By "destroyed" I mean this: Either during a "Wake up failure" or ususally after reboot the drives suddenly were not "recognized" and I would get that dreaded "Initialize, Eject or Ignore" screen we all fear. When it happened and I tried all the standard repair tools (TechTool Pro, Disk Warrior, Data Rescue, etc) most often I ended up wiping the drives since they didn't hold much data, the important stuff safely away inside firewire drives not connected to the MPRr.
    That was until last week.
    A fact checklist:
    All the drives were from different makers and different ages (some brand new, some 1-2 years old).  Made no difference.
    The drives were both powered and unpowered. Made no difference.
    The "destruction" would happen either when the computer went to sleep or simply when trying to use a USB hub.
    I tried 5 different USB hub models. All of them did the same thing.
    To avoid issues, I was reduced to NOT using USB hubs (or even trying) and unplugging EVERYTHING at the end of the day.
    An assistant who was not aware of these problems made the horrible mistake of getting a USB hub and pluging these drives which now held VERY IMPORTANT information, some backed up, some which it had not been backed up yet. Almost INSTANTLY all the drives went bad: Unrecognized. Now, I really couldn't get mad at her because - let's be honest- using a USB hub is not "up there" in the scale of "dangeorus activities" in the computing the world, but it left me  3 dead large size USB drives..And they all had the same problem:
    When plugged in, the system would simply not recognize them.
    Pluging them into an older mac or another mac had the same response.
    In a few occassions the drives would actually appear briefly and disappear again. We are talking seconds here.
    NONE of the repair tools could fix them: TechTool Pro, Disk Warrior and fdsk were helpless.
    Data Rescue could actually see the partitions greyed out but could not access them
    After some digging around it seems whatever is happening with MBPr's USB/Mac OSX/Firmaware is destroying the PARTITION TABLES of USB drives. The data is still there, the system simply cannot access it.
    Eventually I came up with the solution which involves recovering the partition tables via Terminal using an open source program TestDisk. The name of "Stellar Phoenix Recovery" software also popped into from time to time (which I do remember from the old days), but I could not find an actual example of a succesful recovery.
    What you will need:
    This program runs in the Terminal with a very basic interface that uses arrow keys, enter and a few letters. That said, if you have never used Terminal or are not familiar with the terminology I suggest you find someone who does.
    Get the software here: TestDisk - http://www.cgsecurity.org/wiki/TestDisk  If everything goes well, this will be the one time you will truly be motivated to donate some cash. The euphory alone will do it. I know it for me, that's for sure.
    For my recovery I followed this step-by-step tutorial by Perro Hunter, but BE AWARE that it was written at an earlier date as apparently some of the features that the tutorial mentions as "not working yet" are now.
    http://perrohunter.com/repair-a-mac-os-x-hfs-partition-table/
    In my case I did not need to go past step 7, which is good because the warning it gives is pretty  bone-chilling. In my case the software was able to write the recovered partition tables by itself and then when I restarted....the drives were there.  DO NOT IGNORE THE BACK UP AND LOG INSTRUCTIONS. EVER.
    Keep in mind that my drives were formatted as Mac OS X HFS+ / GUID partitions. I have no idea how it will work with other types of formatting. The process itself is very fast. if IN DOUBT, just quit terminal and start over (I did twice until I finally figure out what I was doing). Also, take screen shots as you move along the steps it helps.
    Needless to say, after recovery use Disk Utility, Disk Warrior or TechTool Pro to get the drives back in shape, and if possible, back up everything and wipe them clean which is what I did just to be sure.
    I hope that helps somebody and good luck to you in the process.

    Someone tried to follow this information and perro hunter's blog was not loading.
    3rdLOF made a version on pastedbin here:
    http://pastebin.com/Jb9NfxZf
    In case anyone needs it
    I tried posting this as a User Tip, won't let me.

  • Outlook asking for username and password, but only for some users

    Hello, I'm
    in an Exchange Server 2013 client
    environment, two CAS servers
    and two Mailbox.
    Some users are having trouble in Outlook 2007
    and 2012, which is directly
    requesting the user name and password, not all,
    just some.
    The Active Directory is ok,
    DNS and also own Exchange
    servers apparently do not see errors.
    Has anyone here ever experienced this?
    How can I solve this problem?
    As this happens only to some users
    and the vast majority have no problems, so
    difficult to find the cause.
    Thank you!
    Ivanildo Teixeira Galvão

    Hi Ivanildo,
    From your description, only some users have an issue that Outlook prompts for username and password. In your case, I recommend you compare the normal and problematic Outlook settings. Here is the Outlook settings in my environment for your reference:
    1. "Always prompt for logon credentials" isn't checked.
    2. Logon network security using Negotiate Authentication.
    3. "Connect to Microsoft Exchange using HTTP" is checked.
    4. Use the NTLM Authentication when connecting to my proxy server for Exchange.
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • How to export some users

    Hello all!
    I need to export only a group of people, i am not working with companies, is there any option to filter some users to export?
    Regards!
    Maria

    Hi,
    have a look at the following blog posting which contains Windows BAT files.
    http://www.talkapex.com/2012/04/command-line-backups-for-apex.html
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • Exchange 2013 Sp1 some users cant access owa

    After I install new exchange 2013 with sp1 on windows 2012 R2 server one for mail boxes and the second Client Access, i move all mail boxes to it, then i uninstall  the old server (exchange 213 with cu3).
    All may exchange server’s virtual machines on hyper-v 2012R2
    I install certificate and configure virtual directories
    I notice some users can’t open there mail boxes from OWA they get a blank page after the enter username and password (from internal and external) (the same users can open outlook anywhere) at the same times many users can access owa.
    After many restarts they can access OWA.
    After some days some other users can’t access owa.
    I remove ECP and OWA virtual directories, Then Recreate and configure it.
    But the same problem some users cant access owa 
    I install a new client access server, configure it
    But the same problem

    HI 
    YOu can check below things to resolve the problem
    Disable SSL from Default Web Site if you have enabled them
    Check if you have set any redirection in the Default Website if so remove redirection and see the results
    Ensure that you have a valid certificate for owa VD
    check correctly the authentication type - windows authentication is enabled or if you have form based authentication enabled
    Below is an example for enabling WA
    set-Owavirtualdirectory -identity "servername\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
    Set-EcpVirtualDirectory -Identity "servername\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false 
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

  • Some users are not synced with dirsync

    hi all,
    i have installed the dirsync tool to sync my on-premises AD with office 365, i have some users located in one OU some of them are synced and the others not, the strange thing when i move the users to another OU they sync.
    Thanks

    Are you sure that the OU is in the scope ?
    You can check regarding the link below :
    http://msexchangeguru.com/2012/08/10/office-365-2/

  • Question about user tips

    Hi all. I am unsure of some aspects of the process of creating tips. I created two tips which have been processed and put into the iMovie 09 forum. But the two tips are far more broadly related to video in general, and would be useful in numerous forums. iMovie is only slightly related. Are tips placed into only one subcategory, or should these be moved or duplicated? Also, are they supposed to be in the "User Tips Library" forum as well?
    I'd appreciate the clarification.
    Jeremy

    Hi Jeremy,
    A User Tip can only reside in one Forum so I try to place it in the most relevant one. If it is suggested where it should go, that can help.
    If it relates to just a couple Forums it is possible to link to it from another related Forum but if it relates to many Forums it goes into the main User Tip Library with no links from other Forums.
    Is there another Forum you would like them to be linked from? Or would you prefer them to be moved to the User Tips Library itself? You make it seem like the later is preferred, "useful in numerous forums."
    Let me know. And thanks for your help.
    Nubz N.

  • TFS Kanban board not visible for some users

    We have TFS 2012 and some users can see the Kanban board while other users cannot see Kanban board or (Work>>
    Backlogs). We compared the permission under administrator settings and seems to be same for all users (developers group). Is there any special permission or server side permission you have to assign to see Kanban or backlogs tab?
    Any guidance or instructions would be helpful.
    Thanks,

    see my answer in
    your other posting
    Please use Mark as Answer if my post solved your problem and use Vote As Helpful if a post was useful.

  • Can't Post in the User Tips Library

    Hello,
    I just recently achieved Level 2 ranking status in the forums. For some weird reason, I can't post in the Tips Library. I click on 'Post New Topic', and it asks me to log in. I had already logged in, but I do it anyway. I type in my password, and click Log In. I am back in the Tips Library, and now logged in. When I click 'Post New Topic' again, it asks me to log in again, although I am already logged in! It is an endless circle.
    I really want to contribute!
    ~Christoph

    Christoph * wrote:
    The post must be approved by Apple before it is posted. What are they looking for when they approve these posts?
    Accuracy. Before allowing a post to be considered a valid answer to a frequently asked question about using Macs, Apple wants to make sure it is actually a correct answer and an appropriate solution to whatever technical problem is being addressed.
    Also, why do I see only a few posts in the User Tips Contributions forum?
    Once the Hosts have approved a user contribution, it is removed from Contribution forum...
    Why do I see people's post in the main User Tips Library but yet you said
    No one can post there
    The approved posts are moved to the User Tips Library. In other words, you can't post there; the Hosts move your approved tip to that forum.
    Read through the steps explained in the section titled "The Process" on both pages. It explains this in detail.
    \[Edit: I took ages editing my post and Niel beat me to it. I'll leave my post in case it helps clarify anything. :-)]
    Message was edited by: Rachel R

  • font color="green" How to Find Users Tips (FAQs) on iChat /font

    Hi,
    Some of the more regular Visitors to this Forum may have noticed that above the Topic List is a "Recent Tips" area that has the most recently Updated Users Tips.
    There more, (you may wonder where FAQ 1 is for example).
    One way to find them is to use the Search feature just above your Profile and My Post an Setting Links in the box on the right.
    Many of the Former FAQS and Users tips have had the Search tag kichat added to them.
    Using this and changing the date option to All How to Find Users Tips (FAQs) on iChat">brings up 16 Links in this Example Search
    One of the Level 4 Posters, Red Dwarf, once spent some time going through the whole of the Users Tips Library and posting them in to two formats.
    This link is to the iChat section within his 'by Forum/application' listing.
    There is another 'By Author' Version
    The Whole Users Tips Library is here. IT has a header item that tells you who can post/Suggest new Contributions with a link to that additional forum.
    I hope you find this useful.
    10:06 PM Tuesday; April 14, 2009

    The Section above the topic List in this Forums contains Recent Users Tip section and ifo about Perian 1.1.3 has been added recently.
    (In relation to this post's date)
    8:54 PM Wednesday; May 6, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Maybe you are looking for