Someone sent me a huge spreadsheet. I need to find all occurrences of "communication" and "media" in column A.

Ideally, I could then see the spreadsheet with only those rows visible. If that's not possible, then at least a search on the single row so I can eyeball the search results to see what I have. I can't find any way to do this kind of search. If it matters, I'm running 10.8.5 and Numbers '09.

Use the reorganize panel to filter on column A.  To open the reorganize panel, select the table, then select the menu item "Table > Show Reorganize Panel"

Similar Messages

  • I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive?  I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.

    I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive?  I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.

    Short answer: You do NOT have to reinstall all your apps and copy your files back.
    Longer answer: Upgrading the OS does not touch any user files. Upgrading the OS should not interfere with any applications which are compatible with Mavericks.  In my experience non-Apple apps are generally left unchanged by the upgrade.  It is possible that some apps may need to be upgraded. One good resource for checking application compatibility is RoaringApps.
    Finally, it is always wise to backup everything, just in case.

  • Satellite Pro L40 PSL43E I need to find all the XP drivers

    I need to find all the XP Drivers for this particular notebook. Any ideas where i can find them. on this site i only get the "how to downgrade" Pease Help ASAP

    If such drivers are available then you will be able to find such drivers on the Toshiba European driver page.
    If the drivers are not available on the Toshiba European driver page, then the drivers were not released.
    But Ive got one hint; I found some XP drivers for Sat L40 series. Some series supports the same devices and therefore the drivers should run too.
    Check some single XP drivers from different L40 series and maybe it would run.
    Ciao

  • Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

    Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

    When you enable photo stream on your Mac, in imports photos currently in your photo stream.  However, photo stream only keeps photos for 30 days, even though up to 1000 photos will remain on your device until you delete them.  When you enable photo stream on your Mac, you will only receive photos added in the last 30 days, as the others are no longer in your photo stream.
    If you want to get all your old photos on your Mac, save them to your camera roll (if they aren't already there) by opening your photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll.  Once they are in your camera roll, import them to your Mac as explained here: http://support.apple.com/kb/HT4083.
    Another option would be to create a shared photo stream containing the older photos and invite yourself (as explained here: http://help.apple.com/icloud/#mmc0cd7e99).  Then check Shared Photo Streams in iPhoto>Preferences>Photo Stream and you will see this shared photo stream on your Mac.

  • Hi i belong to a non profit organization (a church) what plan should i get ? we need mainly Ae,Pr,Ps,Au,En and media encoder...what do you recommend?

    hi i belong to a non profit organization (a church) what plan should i get ? we need mainly Ae,Pr,Ps,Au,En and media encoder...what do you recommend?

    As Mylenium said, you need the full plan... check Non-Profit http://www.adobe.com/volume-licensing/non-profit.html

  • I need to find all XML elements and add a line break to the text of each of them

    I need to find all XML elements and add a line break to the text of each of them.
    Is this possible with a script?

    I need to go from this ...
    to this...
    but looking for the XML elements (not paragraphs) and then adding text ...
    Thanks for your attention !!!

  • Someone stole my MacBook Pro. I need to find out what the purchase price was and the serial number for the insurance. Any suggestions?

    Someone stole my MacBook Pro and I thought maybe I could find out how to get the serial number and purchase price for the insurance carrier. I looked in the community and found finding an iPod with iTunes, but iTunes on my iPad doesn't have preferences, so now I don't know what to do. Can I call someone? Is there really any help. Next time I'm gonna buy from amazon because you can go right on to my order history and have the information right at your finger tips in a matter of minutes instead of getting the run around!

    Well, if you don't have a copy of your purchase receipt, then you can find the serial number in your support profile if you registered the machine. As for a copy of your invoice, call the Apple store and ask for a copy.
    https://daw.apple.com/cgi-bin/WebObjects/DSAuthWeb.woa/wa/classicLogin?appIdKey= 58ef9db8ff4d201409e7270a68e4408ae1678e1618204c476572a1b5e5fb3518&path&language=U S-EN

  • I need to find a method of opening and then saving to PDF every Framemaker document in a given directory. Can fmbatch be used to do this?

    Does anyone have an fmbatch file which could find all the .fm files in a given directory, open them with FrameMaker and the save them as a PDF file.
    Or
    Can someone show me the commands required to do that?

    Of you could just make a quick temporary book including all the .fm files
    in the directory and print them to PDFs (no, not SaveAs) and specify
    individual files as output.
    Art Campbell
              [email protected]
      "... In my opinion, there's nothing in this world beats a '52 Vincent and
    a redheaded girl." -- Richard Thompson
                                                          No disclaimers apply.
                                                                   DoD 358
    I support www.TheGrotonLine.com, hyperlocal news for Groton MA.
    On Tue, Jun 10, 2014 at 5:04 PM, guessinggame <[email protected]>

  • I moved 2 weeks ago and my computer never started again. I need to retrieve all my adobe products, and there is a long list of them. What do I do first?

    System crashed. Need to retrieve all my Adobe products. What do I do?

    Berlene8000 please contact our support team to locate your account and serial numbers.  For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to resolve the issue you have described.

  • Need to find all Bugs and QF created for 8.0.0.13

    Hi all,
    I kneed to know how to find all bugs and possibly patches/QF created on top of 8.0.0.13 for bugs found in 8.0.0.13 after its release on Jan 2012. This is for my Customer that needs to know if they have to plan some QF in proactive way.
    I can access to Internal Support Portal, so if there is any place where Support people can go I can access.
    Thank you in advance
    Chiara Scarafiotti
    ACS TAM

    Hi radhika,,
    This the the way to go..just modify the col according to your table col names...
    You can do a CONNECT BY query without a START WITH clause to link every node with each of its ancestors.
    Getting the total is just a matter of GROUP BY.
    SELECT emp_id, employee_name, manager_id
    , CASE
              WHEN COUNT (*) = 1
              THEN 0
              ELSE COUNT (*)
         END               AS cnt0
    ,     COUNT (*)      AS cnt1
    FROM employee
    CONNECT BY emp_id     = PRIOR          manager_id
    GROUP BY emp_id, employee_name, manager_id
    ORDER BY emp_id;
    output:
    Output:
    . EMP_ID EMPLOYEE_N MANAGER_ID CNT0 CNT1
    1 Mark 0 5 5
    2 John 1 3 3
    3 Stella 1 0 1
    4 Karen 2 0 1
    5 Andrea 2 0 1
    I made this a bottom-up query (going from each node to its ancestors) rather that a top_down query (node to descendants) because you can't GROUP BY CONNECT_BY_ROOT.
    In your description you implied that each node would be counted among its own descendants, but in the sample output you had 0, not 1, as the count for all the leaves, that is, managers counted as their own descendants, but non-managers did not. The column called count0 in the query above does that; the column count1 counts each node as its own descendant, leaves included.
    Regards
    Onenessboy

  • NEED TO SAVE ALL MY TAB'S AND BOOKMARKS TO MY EXTERNAL H'DRIVE. HOW DO i DO THIS PLEASE? i

    After my H'drive died some time ago I lost all mt Firefox bookmarks and tabs. Now that I am up and running with a new hard drive plus an external H'drive I need to save all my bookmarks and ttabs to my external H'drive.
    Can you please tell me how I can do this.
    Many thanks.
    John shuff.

    These add-ons can be a great help by backing up and restoring Firefox
    '''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
    FEBE allows you to quickly and easily backup your
    Firefox extensions, history, passwords, and more.
    In fact, it goes beyond just backing up -- It will actually rebuild
    your saved files individually into installable .xpi files.
    It will also make backup of files that you choose.
    '''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
    Import/Export extension preferences

  • HT4906 i need to find all the information this computer

    im kindly requst to help me find out the information in this lapto from the day strt working, i need to find out all my data from this computer. thanks.

    Sorry but your question is not at all clear
    Does this inovlve iPhoto for the Mac in any way?
    What exactly do you want
    What version of iPhoto, of the OS and what model of computer do you have?
    LN

  • Need to find all Virtual Comports with VID 403 and PID 6001

       I program in AutoIT. In a nutshell I need to find the Comport Number
    (not parsed from the FriendlyName and will explain) for all Virtual Serial Ports
    having VID 403 and PID 6001. It is a FTDI Virtual Serial Port.
       I was using the WMI call to Win32_PnPEntity and excluding ports not having
    DeviceID "FTDIBUS\VID_0403+PID_6001". The $oItem.name would than yield something
    like "USB Serial Port (COM17)". This is the Device Manage description. I could then
    parse out the "COM17" and start communicatin with that port via RS232. The problem....
    COM17 is the FriendlyName and the actual port was 25. Yes that is correct.
    Device Manager shows "USB Serial Port (COM17)" butif you right click on it and
    go to properties the actual port number is 25. I verified it by using putty and indeed
    it was COM25. So the "FriendlyName" does reflect the true Comport Number.
       I found a little utility by uwe-sieber ComPortMan which comes with a little
    utility called listports.exe. Here is the output:
    PortName          : COM25
    KernelName       : \Device\VCP0
    DeviceID           : FTDIBUS\VID_0403+PID_6001+A901R735A\0000
    ParentDeviceID  : USB\VID_0403&PID_6001\A901R735
    DriverKeyName  : {4D36E978-E325-11CE-BFC1-08002BE10318}\0088
    FriendlyName     : USB Serial Port (COM17)
       As you can see the true Comport is 25 yet the firendly name is "USB Serial Port (COM17)".
    So... I need to find a way to retrieve the actual "PortName" and not parse the "FriendlyName".
    As mentioned the WMI call to Win32_PnPEntity returns the FriendlyName. A WMI call to
    Win32_SerialPort wont work with Virtial ComPorts. I am at a loss. I know it can be done
    because the listports utility does it. I have no idea where to start at this point. Help!

    Quote from:
    http://stackoverflow.com/questions/4061345/how-to-get-the-actual-com-port-number-with-setupdigetdeviceregistryproperty
    You can use SetupDiOpenDevRegKey to
    open the device's registry and query the "PortName" value; this will give you back something like "COM4". There are a few more ways
    to query COM ports.
    Best Regards,
    Please remember to mark the replies as answers if they help

  • Need to find all Calendars in a site collection

    How can this be done with Powershell?
    Thanks,
    Scott

    See if this will do what you need:
    Get-SPSite http://server/sites/yoursite | Get-SPWeb -Limit All |
    Select -ExpandProperty Lists |
    Where {$_.BaseTemplate -EQ "Events" } |
    Select Title, ParentWebUrl
    Mike Smith TechTrainingNotes.blogspot.com
    Books:
    SharePoint 2007 2010 Customization for the Site Owner,
    SharePoint 2010 Security for the Site Owner

  • Need To Find All PDFs That Have Extensions Enabled

    I have many PDFs in many folders
    I need to search through them to find any that have extensions enabled
    Can anyone recommend a way to do this?
    Thanks
    Mathias

    bumpup

Maybe you are looking for

  • Mac Mini 1.66, CPU upgraded now won't boot, what can I do?

    I have an older Mac Mini which came with a 1.66GHz CPU.  I had previously upgraded the RAM to 2GB and it was perfectly happy with that. A friend gave me a SLA4D Core 2 Duo CPU which was in working order when he gave it to me at least... I installed t

  • PO rejected due to freight

    Hi All,             There was a PO created with no freight chargesin conditions. Now there is a problem in EDI which got rejected for " Invalid Freight charges for the PO number ############ " . Now, the vendor wants to add freight charges to the PO

  • How to change room names

    Using air port express , how do you change room names , eg. Living room , bedroom?

  • Two datafiles change in one

    Hello, some weeks ago I had the problem that I want to change my datafile for my itune. Ihave done it but.... Now I have some in the old (c:musik)and some in the new(d:musik). Thats sh.. How can I get one????????? Thats realy hard work **** Thanks

  • Flex 2-14 keyboard problem

    hi, since i bought this laptop (flex 2-14) one month ago i have only trouble. will start with the first: the letter "g" on keyboard is not working (i am typing this using the screen keyboard). What to do?