Something really wrong.

Here is my problem... I just got a new replacement iPod (my old one had battery problems). And it worked perfectly fine when I first connected it to my iMac. But the second time, when I went to update, the computer was only charging it, no "Do Not Disconnect" on the iPod or anything, and it didn't even show up as a disk on the desktop. After a while, it came up with the Do Not Disconnect, and about half hour later it began updating, the next couple times I connected to the computer it was fine, until now... it got stuck when it was updating on a certain song, so I attempted to stop the update, so I could delete the song (I was losing my patience). But it wouldn't disconnect, and eventually iTunes froze up, so I restarted my computer, but when it was restarted it came up with a message something like "You have inserted a disk with volumes Mac OS X cannot recognize, do you want to continue with it?" I clicked ignore (to continue, because the other option was eject). But after that, the iPod didn't show up on iTunes or the desktop, but it still has the "Do Not Disconnect" on the iPod screen. I have no idea what is wrong with it, and I have tried restarting my computer and restarting the iPod, but nothing is working. So if anyone has any idea what happened, or what I can try to fix it, it would be really appreciated.

Ok... I fixed the problem (sort of). I worked out that it came up on Disk Utility, so I went there, and repaired it, and erased, then disconnected it. Then it came up on iTunes and is now updating the songs. BUT there is one minor thing, on the desktop, it comes up as a normal disk, not as an iPod (it usually has the little blue iPod icon). I don't know why it does this, if it doesn't change anything, then I am fine with it, but if it is going to change something or cause problems in the future, it would be good to know how to fix it.

Similar Messages

  • Theres something really wrong with Clean Up Diagram

    There appears to be some significant problems with the Clean Up Diagram algorithm. It seems that far too much space is padded next to cluster unbundle by name and structure objects. It is really frustrating that some things appear miles apart and others are far too close. I have done a very good job of factoring this application into VIs but the inconsistency around certain objects makes it look terrible.
    Help! I can't read it!
    PS: Prior to now I have been careful not to perform a Clean Up Diagram on the vi containing a case with a large number of sub cases.

    DEppAtNGC wrote:
    As for the feature being "new", it's NOT new.
    Diagram Cleanup was introduced with LabVIEW 8.6 last August. Since this is the latest major version it is a new feature by any reasonable definition.
    I agree that it is not great to be used on excellent code. So far it seems to bring the diagram quality somewhere in the neighborhood of the 70 percentile on my scale (wild guess!). It does a great job on horrible diagrams (it lifts them from very low score), but makes any of my own diagrams worse (they go from the 99 percentile down to 70). Don't expect miracles. I never use it on my own code, but it helped me to make some sense out of nightmare code posted here in the forum..
    DEppAtNGC wrote:
    GET THIS FIXED!!!
    Well, NI is always eager for product feedback, so if you have detailed and constructive ideas about how to improve the cleanup tool, please let them know via the product suggestion center. If possible, include some typical diagrams and describe what's wrong with the current outcome and how you want the results to look like instead. Good luck!
    LabVIEW Champion . Do more with less code and in less time .

  • There's something really wrong with linked files

    I have two days trying to solve this problem, but i can't.
    The demo movie has 6 linked images, 1 flash not linked and 1 flash
    linked. If i plublish this with director 10.1.1, everything is ok.
    But when i publish this in director 11, the linked files don't
    show. If i play the movie inside the dswmedia folder, works fine,
    but when i try it on a browser, don't work. Anybody can tell me
    what's wrong?
    sayeg

    Hi Sayeg,
    The Publish Settings have been enhanced in Director 11 for
    the Linked files publishing.
    If there are Linked files/casts in your movie then the
    "dswmedia" and "Linked files" folder are created automatically and
    the .dcr files will have internal links to these paths, relative to
    the main folder. This folder hierarchy should be maintained, else
    it will not work.
    -Sujai

  • Did something really wrong.

    Hello guys,
    I had this problem of right click and than sometimes windows explorer crashes, so I fell on this topic but hadn't read carefully (stupid me) and I downloaded the reg. file from the third post, and put it in register. Now I rebooted my PC and saw that I can't
    open My Computer or something else related to Windows Explorer, now I see the reg. was for Windows 8 (I have Windows 7)
    Please help me guys, I'm pretty desperate, I searched for the reg. in the regeditor but can't find it.

    Press Ctrl + Alt + Del. Click File -> New Task ->
    explorer.exe. Check if that opens the explorer and navigate through folders. If so, take a backup of important files before doing anything further.
    If explorer.exe didn’t work, try typing c: and check if that opens up C drive.
    Regarding the .reg file. You won’t be able to see .reg file inside registry.  By opening .reg file, you are transferring the info inside .reg file to registry.
    So what you can do is
    Download the .reg file that you downloaded before, on another computer
    Right click on the file and select the option Open with, then select
    Notepad.
    Now you can see the entries inside the .reg file
    Check which entry is listed inside .reg file and what change does it make by executing the file
    Now go back to your original computer and undo the change made by the .reg file
    Hope you can fix this.

  • Something really wrong with my Mac

    The main problem is that when I turn it on it shows the apple logo and the little loading wheel under it but after letting it run for about four hours it hadn't started. To try and fix the problem I put in the Mac OS X disc and erased the operating system and re-installed it. Once I did that it ran fine again for about a week then the Mac froze and I turned it off and was stuck with the original problem again. I've repeated this process several times and keep getting the same problem. Is there any way I can get my Mac to run correctly again?

    There could be several things awry, first off, did you repair permissions after reinstalling? You can use Disk Utility to check your system:
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk.
    After you have repaired the disk, use Disk Utility on your hard drive to repair permissions.
    You might also want to Rum Apple Hardware Test from an install disc, boot it holding down the D key, to make sure that there is nothing wrong there.
    If you don't have the iSight, open the back of the machine and check your [LEDs|http://support.apple.com/kb/HT2831].
    Do let us know how you make out,

  • Something REALLY Wrong Here

    I spent the whole night putting this order form together and now the Submit button doesn't work. It is grayed out, but it blinks when you click on it. Nothing happens, though. I tried with the form open as well as closed.
    The form was copied from another form that worked well. I made some changes to it, simplified it. Everything looks good, but it's not working.
    There is one line item that has a skip logic function - it's supposed to show when any of several choices are made on the form, and is required. It does not appear in the test. Other than that everything is set up the way it should be.
    Three times during creating this form, I got a popup from what looked like Adobe saying that my Acrobat Reader Pro was not up to date and pretty much forced me to click on the 'ok' to update. When I did, a few unwanted programs installed, but not Adobe reader or Flash or anything from Adobe. The installer did not look familiar. I uninstalled it promptly, but it did not affect FormCentral.
    I'm stuck, leaving on a trip tomorrow morning (or this morning)
    R screenshot: Dropbox - Screenshot 2014-06-06 03.13.44.png
    so, I am working on my website in Muse - and I added the order form onto one of the pages And it works!  I was able to complete the form and process through to PayPal. i saved the form as PDF on my desktop and filled it out and it worked. Only from within Muse, testing the form will not submit. I tried on another computer. Same thing

    Possible more help...
    Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
    http://docs.info.apple.com/article.html?artnum=302672
    About Disk Utility's Repair Disk Permissions feature...
    http://docs.info.apple.com/article.html?artnum=25751
    DiskWarrior from Alsoft...
    http://www.alsoft.com/DiskWarrior/
    Data Rescue II...
    http://www.prosofteng.com/products/data_rescue.php
    This last one would require another HD with plenty of space to recover to.

  • IPOD VIDEO SOMETHING REALLY WRONG HELP  PLEASEEEEE

    i connect my ipod video 5th generation to the computer and it won't recognize it ,then a couple off minutes later the screen says very low battery and after another couple of minutes it turns on and starts charging but while this is going on , like 10 minutes later it freezes. And it won't turn on unless connected to my computer.
    i don't know what to do .
    HELPPPP

    Bump for greater justice!

  • I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?

    I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?

    I am having an issue as well, I think it is ongoing for everyone who is trying to update.

  • Classic 'something went wrong' error message.. REALLY?

    I am trying to upload a 32 second silent video from iMovie 11 to Facebook. I have tried the 'export to facebook' option...I have exported the video as a .mov, then tried to upload to Facebook..I have changed the videos size...restarted...reinstalled iMovie....nothing...all result in the brillantly simple, but completly useless error message 'something went wrong, please try again'.
    Can anyone help me?

    AppleMan1958 wrote:
    And if Ksrsten's idea works,…
    nice idea!
    remembers me, in those times, I created in Garageband a 'nix.mp3', which was 3 minutes of plain silence - this fake audio track somehow outwitted YT.
    meanwhile, for YT, this workaorund isn't needed anymore, but I have no idea, how FaceBook handles it ............

  • Office 2013 - Something went wrong (no kidding)

    New x64 machine running Office Home & Business 2013 x86 OEM.
    Originally, everything was running fine. Installed fine, set up fine, and ran fine. Inexplicibally, user calls stating when running ANY office app, it states "Something went wrong" and would not open (computer was only a few days old, no other
    mods/installations).
    Tried:
    Online Quick Repair (same error)
    Online Full Repar (same error)
    Removal of product via KB2739501 (removed fine, now won't install)
    Now product is removed. Ran FixIt KB2739501 twice and even removed Office folders in programs dir. When attempting to run ClickToRun installer, i get "Something went wrong". Really?
    Tried x86 and x64 ClickToRun, no dice. Currently downloading the insanely massive offiline installer (because for some reason MS bundled x86 and x64 together... totally bright), but don't have any faith. User has been without Office apps for days. Scouring
    net notes MS has a recognized issue with the installer process and licensing, but various fixes that worked for others, doesn't work here.
    Any thoughts?
    Thanks,
    Jeremy

    Hi,
    The first step I suggest is to start Office Apps in Safe Mode, check if the crash will happen.
    Let's take Outlook for example:
    Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
    If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
    If the issue persists in Safe Mode, please go to the Event Viewer, you may find out more information about why the Office apps crashed.
    Press Win + R and type "eventvwr" in the blank box, then press Enter.
    You may learn from http://www.msoutlook.info/question/317
    If now you can't install Office properly, please refer to the KB below:
    Office 2013 or Office 365 installation error "Something went wrong"
    http://support.microsoft.com/kb/2827031/en-us
    Try Fix it in the kb to try again.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Exchange 2013 - OWA "Something Went Wrong", Out of office in Outlook "Server unavailable"

    Hi,
    We have a new deployment of Exchange 2013 CU2 V2 running on a Windows 2012 server.  Everything has been running without issues and then without any real clue to why, we are now getting an issue where OWA says "Something Went Wrong" after processing
    your login, (it appears to process the login as if I type in incorrect details it tells me the password/username is wrong).
    At the same time we have also lost the ability to run the Out Of Office in Outlook which comes back saying the server is not available and we can't seem to share calendars correctly either.  (Can set Out Of Office via the Management Shell without issues).
    When running a Get-Serverhealth on the OWA.Protocol it tells me the OWASelfTestMonitor is unhealthy.
    I've tried re-creating the OWA, EWS Virtual Directorys and also the autodiscover but with no effect.  I've also restarted the server. 
    Outlook 2013 and mobile phones are working fine on the server and the Exchange Admin Centre is also working without issues.
    I am getting tempted to apply CU2 again to see if this sorts it but don't really like doing this on a server with 50 live users on it...
    In the eventlog I can see lots of the 2 errors listed below which seems to line up.  (System Log and Application Log seem to be clear of other errors or warnings.)
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 04/11/2013 11:25:00
    Event time (UTC): 04/11/2013 11:25:00
    Event ID: 2fcdb9112c794b63a9ea9577a23e4603
    Event sequence: 2
    Event occurrence: 1
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/2/ROOT/owa-411-130280378905273269
        Trust level: Full
        Application Virtual Path: /owa
        Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\
        Machine name: SERVERNAME (I altered this for post) 
    Process information:
        Process ID: 9648
        Process name: w3wp.exe
        Account name: NT AUTHORITY\SYSTEM
    Exception information:
        Exception type: HttpException
        Exception message: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
    Lots more code.......
    AND
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 04/11/2013 11:24:24
    Event time (UTC): 04/11/2013 11:24:24
    Event ID: 2586a044b2d74b97a1095aec478bf4ae
    Event sequence: 2
    Event occurrence: 1
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/2/ROOT/EWS-668-130280378564324526
        Trust level: Full
        Application Virtual Path: /EWS
        Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\exchweb\EWS\
        Machine name: SERVERNAME (I have changed this for post) 
    Process information:
        Process ID: 9840
        Process name: w3wp.exe
        Account name: NT AUTHORITY\SYSTEM
    Exception information:
        Exception type: HttpException
    Exception message: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
    lots more data...

    Hi Angela,
    I can't see any re-directions on the website and have certainly not set any intentionally.  I did try installing the Remote Web Gateway on the server and then found that it doesn't work on an exchange box and removed it but the server was working after
    this.
    The HTTP Redirect in Default Web Site is not showing anything set and the same for the Back End.
    The bindings on the default site all look normal with;
    http     80   127.0.0.1
    https   443  127.0.0.1
    http     80    *
    http    443   *
    The same is mirrored in the Exchange Back End site but with ports 81 and 444.
    Running the Outlook auto configure just using Autodiscover all looks good with the URLs listed all pointing to (http)://mail.mydomain.co.uk/whatever...  and the log says Autodiscover to (https)://mail.mydomain.co.uk/Autodiscover/Autodiscover.xml Suceeded
    (0x00000000)
    But, if I type in the OOF address of (https)://mail.mydomain.co.uk/EWS/exchange.asmx I get a login prompt but once user details are entered I then get;
    '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
      Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
     Exception Details: System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
    Source Error:
     An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
       System.Xml.XmlTextReaderImpl.Throw(String res, String[] args) +163
       System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace() +7572550
       System.Xml.XmlTextReaderImpl.ParseDocumentContent() +62
       System.Xml.XmlReader.ReadToFollowing(String name) +112
       Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitHelper.ReadKillBitXmlContent(XmlReader reader, Int32& refreshRate) +185
       Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitHelper.TryReadKillBitFile(Int32& refreshRate, DateTime& lastModifiedTime) +710
       Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitTimer.Start() +202
       Microsoft.Exchange.Services.Global.Application_Start(Object sender, EventArgs e) +975
    [HttpException (0x80004005): '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
       System.Web.HttpApplicationFactory.EnsureAppStartCalledForIntegratedMode(HttpContext context, HttpApplication app) +12864205
       System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +175
       System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
       System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
       System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
    [HttpException (0x80004005): '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
       System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12880948
       System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
       System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12722137
    Really wishing I had installed Exchange 2010 at this point!!  Just can't see why its not working :(

  • Oops! Something went wrong! - Re-occuring Problem for multiple accounts

    Good morning.
    My company switched all of our computers to Windows 7 and updated our software to Microsoft Office 365 about six months ago.  Since then, it has been all but impossible to do our jobs properly.  And Tech support is unable to help us.  All
    of their "fixes" were temporary at best and now the problem seems to be spreading.
    In the process of doing our jobs, we have to send anywhere from 5 to 50 E-mails in sequence.  Since all of the E-mails are basically the same thing, just with a different PDF attachment and a slight change to the subject line, we have been duplicating
    them.  Using the subject line, we use "Control F" to duplicate the E-mails. Two of us attach files after duplicating the necessary number of E-mails and two of us attach them as we duplicate.  After setting up all the E-mails we need, we
    send them in order.
    When we had the older version of outlook, this was not a problem.  With Outlook 365, two of us (Including myself) have constantly received an "Oops!  Something went wrong." error message whenever we try to send the duplicated messages. 
    And as of today, three of us now face this problem.  This is outrageous.  This is a program designed to send E-mails and I do not understand why it cannot send E-mails?!
    Tech support has attempted to fix the problem by creating a new profile for us.  This solution lasted anywhere from 3 hours to 3 days before the problem returned and at this point, I have 5 profiles on my account that I switch back and forth between. 
    They even replaced the entire computer once, it took all of two hours for the problem to come back.
    In the beginning, I was the only one with the problem.  In order to perform a test for someone in another Microsoft forum, I loaded one of the other girls profiles onto my computer.  While I did not keep her profile on my computer long enough to
    recreate the problem, it developed on her own computer shortly after.
    Another co-worker came back after a week of being sick to find that the problem has just started on her computer also.  She specifically has been designated to send all of these E-mails since until now, she was the one who could.  In addition,
    when she attempts to duplicate an E-mail, the image in the body of the E-mail changes color and three of the pictures disappear.  This happens to another co-worker, but not to me.
    We're on an exchange server if that matters at all.  And we use a SharePoint server for storing some files in case that matters too.  We really need help.  We already had to make the company drop $50 per person for the sole
    purpose of allowing us to print paper files in order.  Not that I actually believe there's some sort of magic software that can duplicate E-mails and successfully send them.  But we need something that actually works.
    I am extremely disappointed with Microsoft Office 365, Outlook 365 especially, it has done nothing but fight us the entire way.  I know a little more about computers than most of the people in my building and I cannot get anything to work the way it's
    supposed to.  The inability of this technology to work properly has slowed our output to 50% of what it was, unacceptable.  Is very frustrating and I don't know how much longer we can keep going like this.  We can't get any proper help.
    Thank you for your time.

    I believe the "Oops" error text is specific to only the web email app (OWA), not the desktop client.  Do you get any other error details or error numbers?  Regardless of what app you are currently using, it may be worthwhile
    to try the other method you are NOT using (e.g. try the Outlook desktop client if you get the error in OWA, or use OWA if you get the error in the client) just to see if the behavior differs.
    Eric Legault (MVP: Outlook)
    Co-author, Microsoft Office 2013 Professional Step-By-Step
    Try Outlook Touch!

  • Something Went Wrong Error Message Pop Up

    Hi.  I am getting a pop up on my motorola android phone all the time.  It says Something Went Wrong  Please wait a moment and try again.  If the problem persists try logging in.  Retry.  I think it may be related to the Cloud, but I am not sure.  It is really really annoying. 

    "Something Went Wrong  Please wait a moment and try again.  If the problem persists try logging in.  Retry"
    When you hit retry, it simply repeats..... HELP !!!

  • "Something went wrong while taking a photo"

    I have a ASUS windows 8 laptop. when I open the camera app, it say "Something went wrong while taking a photo" and says "connect a camera". I already checked my device manager under the imaging devices, the webcam is installed. i already
    checked the camera permissions under settings but it is already on. I can't also use the webcam on skype or any camera app.i I really need help with this.. thanks

    Hi Ayshine2, 
    Thanks for your post.
    In order to resolve this issue, I want confirm with you 
    that: if this issue relate to TFS? If yes, what’s the version of your TFS?
    If this issue relate to SharePoint 2013, I will move this post to SharePoint forum for the better response.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Something's wrong with iTunes

    Something was wrong with my iTunes before but then I deleted it and redownloaded it. It doesn't have the same problem anymore but now there's a new one! The iTunes License Agreement window pops up but then disappears! It happens really quick so I can't click on "I agree"! What am I supposed to do!?

    hi Can!
    I have the same problem... I cant listen to my music that i have bought online and transfered from CDs.
    what problem are you getting here? are you getting an error message when you try to launch itunes? are you just getting a "flash" of an itunes or quicktime screen? are you just getting an hourglass (in which case are you also running Norton Internet Security 2005)? or is something else happening?
    please describe your own symptoms in some detail. (err on the side of too much detail ... there's could be a bunch of different things going on.)
    love, b

Maybe you are looking for