(SOMEWHAT SOLVED) grub2 finds and boots windows 7 but NOT arch

I installed arch on a new system. I have 64-bit Windows 7 Ultimate. I installed arch skipped bootloader, chrooted into system and installed grub2 and installed. My system is btrfs. I do not have a seperate swap or home partition. OS-prober is installed. I have another system with btrfs and grub2 and all works fine. When I run grub-mkconfig -o /boot/grub/grub.cfg I get this
Keyboard is not working properly on other computer so I cannot insert code brackets.
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/initramfs-linux.img
No volume groups found (what does this mean)
Found Windows 7 (loader) on /dev/sda1
done
Again boot and root partitions are btrfs. Grub2 is the bootloader and it does support btrfs at least the version in the repos a month ago did. I have feeling this might be the problem but I do not know why. Windows 7 boots successfully by the way. No Arch Linux
Edit: Backed up boot partition. Made the partition ext4 and cp'd it all back and still no luck. I converted it because ran the grub-mkconfig again and I got everything above but also I got an unknown filesystem error. Converting it back to btrfs...
Edit 2: I am writing this from within windows but grub2 now shows Arch in the the menu. (no gui on this install yet) After what feels like 100 grub-installs and grub-mkconfigs it is all working. I still have two questions. For like half a second I see a file not found and I think it is a *.mod in /usr/lib/grub/i386-pc directory. (i have good eyes). What could this be? Secondly, what does no volume groups mean? Marking this somewhat solved.
Last edited by quasifilmie (2012-03-30 23:59:43)

I'd just ask checking the grub.cfg file to see if the device id entries for arch in the grub menu are correct.
In my case, I use ubuntu's grub2 and each time I have to update grub for some reason, it wont get the partition right for the arch entry.
Last edited by debdj (2012-03-31 15:28:20)

Similar Messages

TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
any thoughts anyone??

Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
I suggest that you begin by correctly identifying which iPod you have.
http://support.apple.com/kb/HT1353

Dumb Q: problem with Find And Replace window in Flash 8

Dear Flash Group,
apologies if this is trivial, it's my first day using Flash.
I downloaded a Flash project from
http://www.flashorb.com/articles/benchmark_files/flash-benchmark.zip.
This
flash calls into a web service at localhost:8080. I used the
'Find and
Replace' window within Flash Professional 8 to locate the
string
'localhost:8080' and replaced it with plain 'localhost'.
However, when I 'Debug the Movie' (Ctrl-Shift-Enter), it
still tries to
access port 8080! Obsiously, my replace command did not do
what I thought it
would do. I opened the FLA file in a binary editor, and saw 4
more
references to 8080, One if them in 'Properties' of a
WebServicesConnector,
but I cannot figure out how to find the other occurences.
Checking on google, I see lots of people having similar
problems, but no
solutions
Any ideas?
Regards, /george
PS. What do you guys do for code completion - is there a tool
that would
bring Flash on par with an professional IDE?

george,
> when I 'Debug the Movie' (Ctrl-Shift-Enter), it still
> tries to access port 8080! Obsiously, my replace
> command did not do what I thought it would do.
Agreed.
> I opened the FLA file in a binary editor, and saw 4
> more references to 8080, One if them in 'Properties'
> of a WebServicesConnector, but I cannot figure out
> how to find the other occurences.
Might they be the result of that WebServicesConnector
reference?
> Checking on google, I see lots of people having
> similar problems, but no solutions
That's really odd, actually. I'm on these boards every day,
and I've
never heard of this issue. I don't *think* the Find/Replace
dialog visits
panel contents, such as the Component Inspector panel, but I
wouldn't swear
to that.
> What do you guys do for code completion - is there
> a tool that would bring Flash on par with an
professional IDE?
Well, Flash is a professional IDE, of course. By definition,
if you pay
for something, you have acquired a professional product or
service. I know
what you mean, though. Flash itself rocks, but the Actions
panel can be
glaringly weak. Personally, I use SE|PY to edit ActionScript.
http://www.sephiroth.it/python/sepy.php
Sorry I can't speak to your other issue. :-/
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

[problem solved for me] ipod shows up in windows but not in itunes

hi!
i've got an 2nd gen ipod 10 gig.
after having problems with mine i low level formatted it and ran some diagnostics tools from hddguru.com.
and after installing itunes 7 it didnt showed up and i was pretty ****** of. but formatting the ipod with explorer (fat32, quickformat) solved the problem
hope that will help anyone

Have you had a chance to look at this troubleshooting page? It may be of some help: iPod shows up in Windows but not in iTunes

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.

My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!

My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!

With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.

My ipod is recognized in windows but not in itunes. I ran the troubleshooter and followed all of the steps to fix it....itunes still does not recognize my ipod. Anyone know how to fix this?

My ipod is recognized in windows but not in itunes. It shows up in devices and gives me the ok to eject prompt, so I know that the connection is good. I ran the troubleshooter and did all the recommended fixes. Hours and hours later, I still have the same problem. I uninstalled itunes and all its folders, restarted the apple device services and changed the drive letter. Checked my security settings and everything else I can think of. Does anyone know how to fix this?

Did you remove all Apple related software including QuickTime, Safari, Software Update utility for Windows, etc using the exact instructions in this Apple support document?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Are you plugging the iPod into a high powered USB 2.0 port and not a USB or similar? Have you tried different cables to help rule out a faulty or damaged cable?
Does it connect to iTunes okay on another PC or Mac?

"No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
AirPort Utility 6.3.1 for Mac - Support - Apple
Then, power off the entire network...all devices...in any order that you want
Wait a minute, then start the modem first and let it run a full minute
Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
Keep starting devices one at a time the same way until the entire network is back up
See if AirPort Utility can "see" the Time Capsule now.
If yes, try another backup. If you encounter an error message, post back with the exact message.

I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?

I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?

I have the same problem with the right click and do not have the ask toolbar installed on my system?

Possible to dock "Find and Replace" Window?

Is it possible to group the "Find and Replace" window in one
of the panels? I would prefer to have it at the bottom of my
workspace with Properties and Results.
Thanks!

It is indeed possible, providing whatever text is inside a tag of some sort. It could be in a list, heading, paragraph, div, etc... Use the Search: Specific Tag option. See screenshot (excuse the sloppy image).
Nancy O.

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

My photoshop elements12 will not update says error and contact adobe but not open now for help. windows vista

my photoshop elements12 will not update says error and contact adobe but not open now for help. windows vista

I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
The Nikon D60 was first supported in Adobe Camera Raw 4.4.
Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

Hello, my MacMini was in repair and now when it´s starting it finds the bluetooth-mouse but not the bt-keyboard. What can I do?

Hello, my MacMini was in repair and now when it´s starting it finds the bluetooth-mouse but not the bt-keyboard. What can I do?

Reset smc and pram.

(SOMEWHAT SOLVED) grub2 finds and boots windows 7 but NOT arch

Similar Messages

Maybe you are looking for