Sorry i have error pdp autentication on internet

hi i have iphone 5 unlocked but i have error on internet like pdp autentication

That's nice.  Thanks for sharing.

Similar Messages

  • TS2380 It's says I have error code (13014) but I cant open iTunes or get on the internet

    It's says I have error code (13014) but I cant open iTunes or get on the internet

    "Extended" network means your phone is picking up towers from another carrier that Sprint has an agreement with. Long story short, Sprint does not have adquate coverage in the area where you are located when you see "extended".

  • Trying to buy, get "We're sorry, we have encountered an error processing this information. Please try submitting again later, or try using a different web browser. If the problem persists, please contact customer support."

    trying to buy, get "We're sorry, we have encountered an error processing this information. Please try submitting again later, or try using a different web browser. If the problem persists, please contact customer support."

    Moving this discussion to the Adobe Creative Cloud forum.
    Cock please try a different web browser.  If you continue to face difficulties then you can contact our support team directly at Get help with orders, refunds, and exchanges.

  • I have an iphone 4 and trying to upgrade ios 6, downloaded the version and when trying to install get an error that i need internet, i have internet of course... please help...

    I have an iphone 4 and trying to upgrade ios 6, downloaded the version and when trying to install get an error that i need internet, i have internet of course... please help...

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • Sorry a serious error has occured PE3

    I can't get past this message when I either open a new project or a previous one. I have installed the update 3.02 as listed in the PE3 quick tips.
    The full message continues......that requires PE to shut down. We will attempt to save the current project.

    Steve, Geoff
    Same problem here and almost the same day. I have been using PE3 since 9/07 without any major problems. Worthy of note, perhaps: This morning, I accepted an update request for the latest version of Adobe Flash.
    I then ran PE3 to capture footage from the camera; I was able to start the new project and capture OK. Everything seemed fine until after capture was complete: when played back the video in PE3 (just the raw video, before any editing), I noticed there were quite a few dropped frames. Since I had forgotten to turn off the internet (so this old Dell P4 could handle the load), I decided to close PE3, re-check the pre-sets, turn off www and re-capture. When I exited PE3, the PC rebooted automatically (????? never happened before). Ever since (as in, "I've been working this issue all day!"), PE3 crashes ("Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project.") whenever I try to open an existing project or start a new one.
    Like I said, this has never happened before; I highly suspect the Adobe Flash update over-wrote or corrupted some files. I wonder if Geoff also updated Flash (???). I too have installed 3.0.2 and the mac-file-translation update.
    Today, I updated XP; everything is current. I also updated Quicktime (7.5.5). Next, I look into updating the RealTek drivers. Any other ideas?
    Tnx,
    Rob

  • "Publish Error: Publish failed due to network error. Check your internet co

    I am using the very latest version of iWeb. I have had it for a week.
    First let me tell you the message that I got and then what I was doing prior to getting the message:
    It said: "Publish Error. Publish failed due to a network error. Check your internet connections and try again."
    I did check my internet connections and I called mt cable modem ISP. He put me through some tests and ascertained that the problem was not with the cable connection. I can connect to the web (of course) and I can send and receive email. The fellow at the ISP (Road Runner) told me that the uploading goes just fine but that the confirmation end of it is bad.
    I have made 9 pages for my website. I clicked the button to publish the 10th page and got the message at the top of this post.
    Then I called Apple Care and took advantage of the 90-day help warranty. The gal there had me try to publish to my private folder. That worked! I was able to publish to the folder and that message at the top of this post did not appear. It said that the page was published and did I want to visit it.
    I ended up deleting the page about my friend Lerma, since everything was going fine until I did that page. AS I recall, there was a mixup with the pages and I thought I had fixed it.
    Then I worked a little more on my husband's Memorial Site and tried to publish and got the same bad message as above, meaning that it wasn't just the page about Lerma but any page I might be doing since doing her page.
    NOW THIS IS THE ODD PART:
    I went to the website on Safari browser with the intention of checking out the other earlier pages, only to discover (happily) that my husband's memorial page (the beginning of it) WAS THERE even though I got that message saying that there had been a network error. Lerma's page, however, was NOT there.
    I am between happy knowing that a page can show up on the website even though I get a message saying that it did not, but anxious knowing that if I am getting Publish Error messages, something is screwy with the program.
    I will continue to try to publish to the Internet, but meanwhile I welcome any observations and happy accounts of how they got the same message but everything ended up fine after a while.
    Meanwhile I am going to be working on my pages even though right now I am getting those messages saying that they could not publish due to network error.
    I need a break.
    — Lorna in Southern California

    Hi Lorna!
    Sorry to hear that you're getting the dreaded
    "Publish Error" message from iWeb. Lots of people
    have reported getting this type of error...and I
    don't think it ever really has much to do with the
    network...at least nothing that can be fixed. The
    fact that you have been publishing just fine up until
    now is a good thing. Some people have NEVER been
    able to publish to the web. Hopefully this problem
    will clear itself up. Maybe it's just sunspots or
    something. Probably someone thinks you need a break,
    too.
    Is this the kind of thing that would warrant me going back to the Apple Store to get an exchange???
    — Lorna in Southern California

  • Error Message: Sorry, a serious error has occurred that...

    This seems to be a common problem, however, I have not found a fix. I am somewhat technologically savvy, but limited! Listed below are my specs and details to the problem.
    Software- Premiere Pro (Version 5.03) Recently updated
    OS- WIN7 Core 2 Duo CPU E8400 3.00GHz 4.00GB RAM
    Footage used- all types
    Error message text-
    Sorry, a serious error has occurred that requires, Adobe Premiere Pro to shut down. We will attempt to save your project.
    The problem-
    When attempting to start PP it allows me to start a new project, select setting, and sequences. However, as the program begins to start up the new project the error pops up. The only option is to click ok, which in turn locks up the program.
    Also any files that I have previous created also will not open properly.
    Also, I have recently lost a drive that contained many of my old PP projects. I've read that some people have this problem when losing a drive that once related to possible PP preferences and scratch disks...once again I am limited on understanding how that all works.
    I have restarted, cold boots, warm boots....clean uninstall, clean reinstall of PP and all components, updated chipset, display adaptor is up-to-date (NVIDIA GeForce 9300 GE) ...also I am an administrator of the workstation
    **Through my many failed attempts from reading forums I have also at sometimes received a RunTime Error R6025 (pure virtual function call)
    I have no 3rd party effects
    not using Mecury to my knowledge.?

    Has it worked OK in the past?  If so, try System Restore.
    While your computer might meet Adobe's minimum requirements, it is way underpowered to run Premiere Pro properly. 
    See here:
    http://forums.adobe.com/message/6336879#6336879

  • Error Message:  Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.

    Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
    Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
    Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
    Does anyone have any idea what may be causing this issue and how to resolve it?
    Thanks in advance for any suggestions.
    By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.

    Not enough information for anyone to even make a guess
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • Sorry, a serious error has occured

    I worked on a project for several hours yesterday. Now it will not open. I tried opening another project from last week. WILL NOT OPEN. In fact, none of my Premiere CC projects will open. They are all corrupt.
    Well done Adobe. I'm missing Final Cut Pro more and more everyday. I swear I come across some glitch or a gotcha nearly everyday with the this software.
    Can someone please explain why a project(s) would suddenly corrupt???? And why on earth is the this software so unstable?
    I'm running on OSX 10.9.2 with the latest update of Premiere CC 7.2.1
    This is the message:
    "Sorry, a serious error has occured that require Adobe Premiere to shut down. We will attempt to save your current project."
    No projects open, no autosave projects work and literally days have been wasted if these can't be opened.

    I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
    Mac and Root User http://forums.adobe.com/thread/879931
    -and http://forums.adobe.com/thread/940869?tstart=0
    Troubleshooting guide for Mac freeze
    http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
    OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html

  • Sorry, a serious error has occured that requires adobe premiere elements to shut down. we will attem

    So I've had premiere elements 9 for a while and it always worked just fine, but one day right in the middle of working on a project i get this error message:
    sorry, a serious error has occured that requires adobe premiere elements to shut down.
    Why did this come up? I know I've plenty of free space and everything! Please if you know how to fix it then help!
    Some other info:
    My computer runs on windows 7
    Once again, the Premiere elements I'm using is 9
    Please if you know what to do please help!

    Yes Bill,
    I too have been very errant in turning off the CA Vet Security system , it too causes problems .
    Regards,
    Bob

  • Another 'Sorry, a serious error has occurred...'

    Hi Folks,
    I searched and tried some of the solutions... deleting style folder, creating a new cache with no joy so far.
    Hoping someone here can help.
    Hardware/OS specs at http://dl.dropbox.com/u/9233828/PRE_hardwareinfo.txt (dumped from speccy today)
    Prem Elements version 9.01 (N224.08092010.240488) - I tried an update a couple of days ago, so hopefully that's the current flavour of 9.x
    Issue:
    Elements has been working perfectly on this machine since buying and installing it back in August 2011 (a couple of weeks before 10 came out )
    This week however it has stopped working.
    Starting Elements produces the following behaviours
    The welcome screen loads
    I get the Organize/New Project/Open Project screen
    If I open an existing project:
    Project appears to load (status bar completes)
    Nothing happens
    Menus are accessible but most options are greyed out - I can't even deactivate to try a re-install
    If I start a new project
    I get the New Project Dialog
    Nothing happens as above
    If I then try to either open a project or start a new one from the file menu I get the 'Sorry, a serious error has occurred that requires Adobe....'
    Clicking OK does not however close elements down - I can repeat the process ad-nauseum until I shut it down
    All other Adobe progs (CS5 Design Premium) are working fine
    Any suggestions?

    Thanks everyone for your suggestions I've tried most of them, but I think I'll cut my losses and get a different NLE.
    I'll sum up the experience here, not so much for the forum regulars but for those who have come here via a web search having also entered the dead-end street of "Sorry, a serious error has occurred...", or, as I'm coming to know it, the Adobe Grey Screen of Death (or GSOD as it's easily as annoying and difficult to do anything about as the dreaded Windows BSOD).
    So, if I understand it correctly, this error is thown up when some unspecified circumstance occurs that Premiere can't cope with.
    No clue is provided to the user of what may have caused it
    No log files are created
    No entry is made to to the Windows application log
    There is no debug mode
    There are at least 20 recorded possible causes for the error
    Adobe takes no resonsibility for the issue - it's a problem on the user's machine
    Diagnosing the problem, working through all of the documented causes may require a massive commitment in terms of time and effort with no guarantee of success and, looking at some of the many posts on the subject, be detrimental to other applications or the system as a whole.
    Premiere is a powerful and relatively easy to use tool, when it was working I thoroughly enjoyed using it. However, when it goes wrong (and reading posts here and elsewhere, it seems to go wrong quite a lot) it crosses the border into crapware - software that is poorly engineered and does not adhere to best practice with regard to error handling. As with any service - the quality of the product is often best measured by what happens when something goes wrong, rather than by how it behaves when everything works.
    A sincere thanks to those in this little community that tried to help, but life is too short and my time is too valuable to spend more than a couple of days on this.
    I'd advise anyone finding this post when researching for a purchase to look at Premiere as a question of risk management - if it works and continues to work then it's brilliant and offers great value for money. If it breaks then there is a very good chance that you're thoroughly stuffed...
    I'm off now to decide between Corel and Sony for my next go at video editing
    Good luck

  • Very Common Premiere Error?? "Sorry, a serious error has occurred that..."

    "Sorry, a serious error has occurred that requires Premiere to be shut down. We will attempt to save your current project"
    Yep, that one.  I get it every time I open up Premiere.  The error box reappears after a couple of seconds, then it keeps reappearing and stacking up until I close the program.
    I've done the most recent updates (Vista and Adobe), and spent hours on the net reading and trying different solutions.  To no avail.
    I think this is a pretty common error, no?  But from everything I've read, people get the error using PR mid-program.  For me, I can't even open the program.  After Effects also starts (as a process in Task Manager), but runs in the background.
    I updated MS Office 2007 (big update) and also my NVIDIA drivers (after I started getting this error).
    You can read my recent problem that might help you understand a little bit more about this error on this thread.
    Would upgrading to a Quadro GPU help at all?
    My PC:
    C2D E8400 o'cd @ 3.6GHz
    8GB ram (DDR2 800)
    1TB raid 0 (500GB internal as scratch disk)
    2 512mb 9600GT's in SLi - should I upgrade??  NVIDIA Quadro?
    Vista Ultimate 64-bit

    Thanks, Jim.
    So, (considering my unwillingness to wreck my current setup), would this possibly help my performance:
    OS: (2) 500GB internal SATA's in RAID 0 (as is)
    Scratch Disk: (1) 500GB internal SATA (sort-of as is)
    Media files Disk: (1) 1TB non-'green' internal SATA (new purchase)
    My main question is:  What's the main difference between a Scratch Disk and a Media Files Disk?
    For instance, I have a newly captured clip (let's call it footage.mpeg).  And I have music.mp3 and lotsofpictures.jpg.  So would I store all three of those files on my Media Files Disk, or on the Scratch Disk?  The Scratch Disk was just for rendered files I thought (like when you're working on a project and previewing it?)?  And so is Premiere reading from my Media Files Disk to play footage.mpeg and then using the Scratch Disk to bounce files back and forth?  Sorry if I'm not making ANY sense.
    Is my suggested setup a dumb idea (bad investment)?
    PS - this may be another problem: my Scratch Disk (Hitachi internal 500GB SATA) is an OEM drive shipped as running on SATA I for 'backwards capability' for older mobos.  So, I downloaded the firmware updater from Hitachi and the updater wasn't working (locking up after booting from CD).  I figured it would be fine.  Well, SATA I runs at a much slower speed than SATA II (the new standard).  But I was transferring files to and from the drive and my OS RAID configuration and Vista was reporting over 30MB/s sustained write speed.  Which by the way is not SATA II (also called SATA 3.0Gbit/s).  I think this may be causing some of my performance issues.  What do you think?  Normally, SATA II should run at 300MB/s (so they claim)   SATA 3.0Gbit/s specs

  • Sorry, a serious error has occured... can't read Premiere 2.0 archived project

    I am in the process of upgrading from Premiere Elements 2.0 to Premiere Elements 7, and also from Windows XP to Windows 7.  I have XP on one hard drive, and Windows 7 on another.  I've installed Premiere Elements 7 on the Windows 7 disk.
    When I create a new project on PE 7, everything works OK.  When I try to read anything that I created in PE 2, I get the following...
         "Sorry, a serious error has occured that requires Adove Premiere Elements to shut down.  We will attempt to save your current project."
    In PE 2, I archived a project onto the hard drive Windows 7 hard drive, in 'my videos' folder, but even that causes me to get the above error.
    Does anyone have any suggestions that I could try?
    Thanks in advance,
    Ron

    You could export to DV-AVI and then read it in to PRE7 (but this will embed any transitions or effects into the import file).
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Sorry, a serious error has occurred... Rant and a solution

    Warning. Much of this post is frankly a rant against a poorly written program and the so-called experts who offer up solutions here. If you are one of these experts and you have a thin-skin, don't read this post.
    If you just want a solution to the problem skip to the bottom of the post.
    INTRODUCTION
    Adobe, I want my money back! I rarely buy Adobe products and always wind up regretting it when I do. This product was no exception.
    I tried the trial version. Bought the product along with Photoshop Elements as part of a promotion.
    Produced a couple of videos with it, no problems. Then, inexplicably, it stopped working for me and I would get the infamous "Sorry, a serious error has occurred..." message while trying to start or open a project. This would happen almost immediately, as it was drawing its intial screen layout.
    MY FIRST BIG COMPLAINT... USELESS ERROR MESSAGE
    This has to be the most useless error message I've ever read. The few times I've had programs crash on me, the error message that results usually gives me enough clues to find and fix the root problem.
    ONWARD...
    Uninstalled it with Revo Uninstaller, re-installed it.
    Deleted all old project files.
    Tried to re-start by clicking 'New Project' button.
    Prompts me for a location for the project. I accepted the default.
    Immediately gives me the "Sorry, a serious error has occurred..." message and shuts down when I press okay.
    MY SECOND BIG COMPLAINT... INCOMPLETE UNINSTALL
    I did observe that when I went to use the Organizer after the re-installs, the thumbnails of previous videos were still there. Clearly some cache wasn't removed during the uninstall.
    If a cache wasn't removed, perhaps other remnants of the the program were still lying about on my machine. If they were the problem, then no amount of uninstalling/ re-installing would solve the problem.
    CONTINUING...
    At this point, I came to the forums for help and my worst fears were confirmed. This error message is a common problem. The suggestions to solve it were all over the place. The sheer depth and width of this faultfinding indicated to me that this is a seriously buggy piece of software.
    With one or two exceptions it seems that nobody ever resolves this problem.
    MY THIRD COMPLAINT... WELL-MEANING BUT UNHELPFUL 'SOLUTIONS'
    These are some of the typical solutions I read on these forums:
    - Your computer is probably underpowered. Give us a list of all your specs.
    - Your computer doesn't have enough hard drive space. Give us a list of all your specs.
    - Your computer doesn't have enough RAM. Give us a list of all your specs.
    - Something on your computer has 'changed'. Give us a list of all your specs.
    - Your hard drive is dying. Back it up quick!
    - It's probably your anti-virus software. Turn it off.
    - Some of your drivers are probably out of date. Update them all. Give us a list of all your specs.
    - That's a different issue... start a new thread. (Lame...)
    Most of that advice is... well, lame. It's pretty obvious that these people are just winging it, i.e. throw everything up there and hope something works. Sorta like that tech guy on the support line who always ends up telling you to 're-install the program' because he really has no clue what the problem is and just wants you off the line.
    As someone who has used video editing programs for years, I'm here to tell you that the problem is rarely the computer specs. The specs listed by Adobe for this program aren't that onerous and my three-year-old Dell 1525 laptop with less than 20 megs of space on its 136 HD and 2 megs of RAM was able to produce videos with no problem.
    Most computers sold within the last three or four years are pretty robust and should have no problem with consumer level video editing.
    Sending people off on a quest to 'fix' their computer and research a lot of computer specs is a time-waster. That should be the LAST thing you recommend after first eliminating the program as a problem.
    ONLINE SUPPORT
    This is worthy of its own post, but I won't bore you here. Suffice it to say that Adobe tech support deserves some sort of industry recognition for its ineptitude.
    MY SOLUTION
    First, let me reinterate. The problem is probably the buggy program and not your computer, assuming your computer is relatively new and mid-range or better.
    In my case, the clue was in the fact that not all of the program is uninstalled when you try to do a uninstall / re-install. The program likely had some sort of corrupted cache that stopped the program and that remained after an uninstall.
    I unstalled it again, but after some research I came across this tool:
    Adobe Creative Suite Cleaner Tool at http://kb2.adobe.com/cps/829/cpsid_82947.html
    and this reference:
    http://kb2.adobe.com/cps/859/cpsid_85966.html
    The reference above applies to Photoshop, but the Organizer elements applies to Premiere unintalls as well.
    After applying these two solutions and then re-installing, my Premiere Elements is working once again.
    Had I followed the typical advice I would have spent days updating drivers, installing RAM, de-fragging and cleaning up my hard drive, listing specs to post here, etc. And none of it would have mattered a wit.
    The program is still buggy though and my original problem may re-occur, I admit. I will certainly never buy another version of this POS program again, but, in the meantime, I hope I can save someone here some time in looking for a fix for their own message.

    Your post count is 2 (as I write this) beginning July 17 - which indicates to me that you never asked for help in this forum (or you did so under another name)
    As Steve said (and which you may not have known) this is not Adobe support, this is a place provided by Adobe for users to try and help each other
    Yes... Adobe has less than good telephone support... a year or so ago that was even admitted to by the Adobe CEO, with discussion of that over in http://forums.adobe.com/community/general/forum_comments or maybe it was http://forums.adobe.com/community/general/forum_comments (been long enough ago that I don't really remember)
    If you do have future questions... come back and ask and someone will try to help
    Just as advance notice... don't come in saying "my file won't work... why?" without providing details... such as
    This is not pointed at you, at least right now... this is just for the future
    More information needed for someone to help http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    Build a Configuration file http://forums.adobe.com/thread/877653?tstart=0
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/

Maybe you are looking for