Sort the data set after quering

Hi
I have a grid where I query and load the data.
Is it possible to filter and show the same data set which I have got in the grid with a check box item.
Some occasions needs to get input for the said filter from the first row of the grid.
(Dev Forms Builder (9.0.4.2.0))
rgds
shabar

Hi Navnit Punj/Danish
I hav a following table
clo1 col2 col3 col4
12    po   56    Y
13    ss   75    Y
14    ty   40    N
19    po   35    Y
21    po   80    NWill say by normal query (F11 and after giving col2 value in the grid and ctrl + F11)I get the following data on the grid
12    po   56    Y
19    po   35    Y
21    po   80    NWith this by clicking check box I want to get the records only having 'Y' for the col4.
rgds
shabar

Similar Messages

Header data come from the Data Set, Issue if Data Set is sorted

Currently in our Data Set, the 1st line contains unique fields for the HEADER. For example "adress of the user site".
If we are sorting the Data Set, the 1st line value is empty, so the Header Data is empty.
What would be the best way to solve this problem:
- Duplicate on all lines, but we want to avoid this solution to reduce the Data Set Size?
- Does Crystal Reports fields can have a specific "Set-up" to define that they are for the Header so, it's an unique value?
Remark: Our Data Set is unique, ie: there is no table link because it's not possible from the database we are extracting values.
Thanks in advance

Hi Alexandre
The best way to display only the header i.e. the uniques line would be to write a formula. Write a formula to extract the line for header and drag this formula field to your report.
Hope it helps!!
Regards
Sourashree

How do I sort the data in the spreadsheet?

This is a fairly basic question and something I do all the time. I need to sort the data on a particular column or set of columns and am frustrated that it is this difficult to find. In trying to figure this out I know also have a chart on my spreadsheet that I can't seem to delete.

If you don't see a gray bar above the table, then tap a cell to show the gray bar.
Select a column by tapping the gray bar directly above the column. After the column is selected, tap the exact same spot again to show a menu.
In the menu, tap on Sort... etc...
Sort will sort the selected column, but will also update the entire table accordingly. If you don't want the rest of the table to update, then you have to copy that column (with the columns that you do want to update) and paste them onto the canvas so they appear in their own table. Sort the column then and paste it back into the original table.
Delete the chart from a menu that appears similarly as Sort. Tap on the chart one time to select it. Tap it again to show the menu with Delete. If you are doing this and choosing Delete, but the chart is not disappearing, then there might be a problem with the file.

Can the case be changed while uploading the data or after uploading ????

hi all ,
can u pls help me ??? can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last) condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

this is the itab declaration ..
data: begin of it_input occurs 0 ,
       tra          like tstc-tcode,
     end of it_input.
and then from the uploaded data the prog should check wheather it is having any userexits or not ...
here comes the code...
sort it_input by tra.
delete adjacent duplicates from it_input .
loop at it_input.
           it_itab-sno = sy-tabix.
select single * from tstc where tcode eq it_input-tra.
if sy-subrc eq 0.
    select single devclass from tadir into v_devclass
             where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
         if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
         move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
       if sy-subrc = 0.
        select single * from tstct where sprsl eq sy-langu and
                                        tcode eq it_input-tra.
                  if not jtab[] is initial.
           loop at jtab.
                select single modtext from modsapt into str
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                it_itab-tra        = it_input-tra.
                it_itab-i_obj_name = jtab-obj_name.
                it_itab-i_modtext = str.
                append it_itab.
                str = ''.
           endloop.
          endif.
        else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'No user Exit exists'.
                 append it_itab.
        endif.
      else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                 append it_itab.
      endif.
endloop.

I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of

I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.

Welcome to Apple Support Communities
When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
Respecting to the second question, you will get better answers in the Numbers for OS X forum

How do I change the screen resolution on my Dell PC back to the original setting after itune change ?

How do I change my Dell PC screen resolution back to the original setting after itune resolution changes

Hi penguin05,
Welcome to Lenovo Community Forums!
   First without the projector connected
           Right click on your desktop screen and select "Screen Resolution"
             you will get this page
Spoiler (Highlight to read)
Now Connect your projector and make sure that the display is now on your projector.
   under Display: Set it to your projector
             -Change the Orientation: to Landscape View then hit Apply.
Let me know your findings
Regards
Solid Cruver,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to change the Data sources after deploying the application ??

Hi All,
i want to know how to change the Data sources after deploying the application to the application server ???
I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

Extend the data set

Hi all,
Please find the below sample scenario where i have to extend the data set.
I am currently working on oracle 10g and while expanding the data set we should exclude the weekends.The sample is only for 2 ids but there can be more ids.
Thanks for all your help.
ID                    ST_DT          END_DT          VAL
====               ========         =======        ========
1                  2/2/2011             2/4/2011       4
1                  2/4/2011             2/8/2011       5
1                  2/8/2011                            6
2                  1/28/2011           2/1/2011        2
2                  2/1/2011                            8
ID                    DT             VAL
====                ========      =======
1                 2/2/2011           4
1                 2/3/2011           4
1                 2/4/2011           5
1                 2/7/2011           5
1                 2/8/2011           6
1                 2/9/2011           6
2                 1/28/2011          2
2                 1/31/2011          2
2                 2/1/2011           8
2                 2/2/2011           8
2                 2/3/2011           8
2                 2/4/2011           8
2                 2/7/2011           8
2                 2/8/2011           8
2                 2/9/2011           8
select 1 as id,to_date('02/02/2011','MM/DD/YYYY') as st_dt,to_date('02/04/2011','MM/DD/YYYY') as end_dt, 4 as val from dual
union all
select 1 as id,to_date('02/04/2011','MM/DD/YYYY') as st_dt,to_date('02/08/2011','MM/DD/YYYY') as end_dt, 5 as val from dual
union all
select 1 as id,to_date('02/08/2011','MM/DD/YYYY') as st_dt, null as end_dt, 6 as val from dual
union all
select 2 as id,to_date('01/28/2011','MM/DD/YYYY') as st_dt,to_date('02/01/2011','MM/DD/YYYY') as end_dt, 2 as val from dual
union all
select 2 as id,to_date('02/01/2011','MM/DD/YYYY') as st_dt,null as end_dt, 8 as val from dual;

Hi,
I assume that, when end_dt is NULL, you want to use today's date as end_dt, and that the results you posted are the results you want if the query is run on February 10, 2011.
Here's one way:
WITH     got_n_days     AS
     SELECT     id, st_dt, end_dt, val
     ,     NVL ( end_dt
              , TRUNC (SYSDATE)
              ) - st_dt          AS n_days
     FROM     table_x
--     WHERE     ...     -- If you need any filtering, put it here
,     cntr          AS
     SELECT     LEVEL - 1     AS n
     FROM     (
               SELECT MAX (n_days)     AS max_n_days
               FROM     got_n_days
     CONNECT BY     LEVEL <= max_n_days - 1
SELECT       d.id
,       d.st_dt + c.n          AS dt
,       d.val
FROM       got_n_days     d
JOIN       cntr          c ON     c.n     < d.n_days
WHERE       TO_CHAR ( d.st_dt + c.n
              , 'DY'
            , 'NLS_DATE_LANGUAGE=ENGLISH'     -- If necessary
            ) NOT IN ('SAT', 'SUN')
ORDER BY id
,            dt
;Basically, each row in your original table has to be repeated n times, where n is the number of days between st_dt (included) and end_dt (not included). The first sub-query computes that number, and the main query produces the results by joining your data with a " counter table", cntr, that has one row for every value of n that you might need. That "table" is generated in the second sub-query.
The join produces a row for each day. The WHERE clause eliminates the Saturdays and Sundays from those results.
Thanks for posting the sample data in a useful form! That really helps.
Edited by: Frank Kulash on Feb 10, 2011 2:29 PM

How to sort the data in JSP using stylesheet sorting?

Hi, i extracted data out in and display them <%=data%> in the jsp, but how to sort? do i have to provide a drop down list that gives different sorting options, and when user clicks on one option, say sort by title, the collection of results are sorted out on the same jsp page? so all in all, only one jsp page is needed or do i need to create xml files, etc?
i have no idea how to integrate the xml sorting into the jsp page, even after seeing online help, cos there is no example of a jsp page with sorting to refer to. PLease help, thanks alot!

im getting the data from beans, but one of the requirements was that i cant use the database to sort and display but i have to use xslt to do the sorting in the jsps, so i have no idea how to do so. possible to give an example? thanks

Sorting the data of control block in oracle form 10g

I have two block....both are the control block..
in first block i select the date and in second block the data of that date is populated.but the data is populated
using cursor in when-button-pressed trigger of that first block button...
in cursor the data is selected and placed in field of detail block using into clause.... each field..
.and one item of detail block is srno which is create in post-query of detail block using
:sysyem.trigger_record.
Now i want after populated the detail block the data is sorted desc one of the field of the detail block...
Can this possible using set_block_property() of block although the block is control block if yes where i should do
this??????
Please explian...????

but with the cursor of repopulate ...how the block is in desc by one field..because if i use again the same cursor to poulate than whats this benefits???
if i write a cursor in button when-button-trigger in first block like this code....
go_block('');
cursor emp_cur is
select empno,date,sal
from emp;
begin
for i in cur loop
select i.empno,i.date,i.sal
into :empno,:date,:sal
from emp
end loop
end;
this loop populate the block which is controll block..
syntax error should be ignored ...i wana to explain what i want to do...
this is not the actual query i have another query but the concept is that...
how i can do this...

I have used a 'for loop' to create an array of output data, however I want the each of the data sets from the array to be placed into a 1-D array. How do I concatenate the output of the for loop into a 1-D array?

I am using this to create a data set that will be passed as an anolog output therefore it needs to have the correct array dimensions to go into the analog write vi.

I'm updating my request... I've figured out how to do this by copying an example that uses a simple FOR loop (as seen in the attached current version of my VI). My question now becomes this: Is there a way to save the Y values corresponding to those X values into two more arrays? That is, just for argument's sake, let's say I took the first 100 elements from the X array, and found them to be positive. Then I would like to take the first 100 elements of the Y array and put them into a 'Y Values for X > 0' array. ...And likewise with the negative X values, they should have a separate array of corresponding 'Y values for X < 0' array.
I can see that I should somehow save the indices of the positive X values from the large arrray wh
en I sort them out, and use those indices to pick out the elements from the main Y array with the same indices.
I just can't seem to set up the code necessary to do this. ...Can anyone help, please?
Attachments:
Poling_Data_Reader_5i.vi ‏79 KB
30BLEND.txt ‏3 KB

What will happen to the data block after data offloading?

HI All,
Since offloading can filter out the necessary information such as unnecessary columns and rows before they are passed to the database, I want to know what will happen to the data block? Will some new blocks be built at this time,which only contains the useful information?
Best regards,
Leon

Andy Klock wrote:
The statement seems to imply that Exadata has the ability to strip out columns from a block, but a block is a block is a block. Offloading is remarkable at filtering out data in the storage layer that ultimately is not needed but if you only need one row in a block that has 100 rows in it, you still get the whole block (and all 100 rows) to be processed by Oracle. The columns portion of the statement is when HCC is used for a table allowing only the blocks containing the column data required for the query, and thus if a block has 1000 column values in it, it will pass all 1000 column values to the instance to be processed.These assertions are incorrect.
Blocks sent to the database grid as a result of a Smart Scan contain only the necessary columns and rows for the db grid to do its processing (after filter restrictions and projection restrictions are applied). These Smart Scan blocks are created at run time by the storage server so they have no bearing on the blocks that reside physically on disk which is why they can not be reused by other queries via the SGA and are read directly into the PGA space.
Regards,
Greg Rahn | blog | twitter | linkedin

How does the data inserted after a delete command

Hi Folks,
I have a question regarding a scenario. I deleted some data from a table ( i use the where clause to delete a portion of rows from the table). So after the rows are deleted the space is free but below the high water mark. When i insert new rows in the same table, then where from oracle fetches the space:
A. Will it use the space that is freed up by deleted the rows
B. Use the space above the high water mark. ( If it uses this space then Lets say all the extents are completed and we dont have any extents above the high water mark, then will it use the space freed by the deleted rows or will it complain for the addiditional space)
Please advice.
Also I would appriciate if you could give me a link for a documentation for the above scenerio.
Thanks in advance
Karthik

A. Will it use the space that is freed up by deleted
the rows That depends, it's controled by PCTUSED and PCTFREE parameter as described below. Also the free space need to be big enought to hold the new row.
The PCTUSED Parameter
The PCTUSED parameter sets the minimum percentage of a block that can be used for row data plus overhead before new rows are added to the block. After a data block is filled to the limit determined by PCTFREE, Oracle considers the block unavailable for the insertion of new rows until the percentage of that block falls beneath the parameter PCTUSED. Until this value is achieved, Oracle uses the free space of the data block only for updates to rows already contained in the data block.
B. Use the space above the high water mark. ( If it
uses this space then Lets say all the extents are
completed and we dont have any extents above the high
water mark, then will it use the space freed by the
deleted rows or will it complain for the addiditional
space)
When Extents Are Allocated
When you create a table, Oracle allocates to the table's data segment an initial extent of a specified number of data blocks. Although no rows have been inserted yet, the Oracle data blocks that correspond to the initial extent are reserved for that table's rows.
If the data blocks of a segment's initial extent become full and more space is required to hold new data, Oracle automatically allocates an incremental extent for that segment. An incremental extent is a subsequent extent of the same or greater size than the previously allocated extent in that segment.
Please advice.
Also I would appriciate if you could give me a link
for a documentation for the above scenerio.
check Oracle Concept for more detail,
Data Blocks, Extents, and Segments

How to activate a different sub-report for each row in the data set as main report page breaks on each row of data in the main dataset

I am going to try asking this same question a different way as I have yet to find a working solution to my problem. I have a main report and then 8 sub reports. My main report has one data set and returns one row of data per account number. One
of the fields in the main data set is called AccountProf. My main report displays one page per Account number and then calls a different sub report based on that account's AccountProf value. The sub reports take in the account number as a parameter
and get multiple rows of data to display that accounts usage formatted differntly for each AccountProf (hence the 8 different sub report.
So far I can figure out how to do everything but setting the visibility property of each sub-reports when I have multiple accounts. If I use the following expression for the visibility property on each sub report, it makes all the applicable sub report
for all the accounts requested visible at once:
=IIF(Fields!AccountProf.Value= "USE_PLUS_DMD",False,True)
*The value in bold USE_PLUS_DMD is different for each sub report.
Here is a look at what the main report look like:
Here is the main reports data set:

Hi JasonDWilson77,
According to your description, there is a main report and 8 sub reports in the report, you want to set visibility of sub reports, if no value is passed to the parameter of sub report, the sub report will not be displayed. If that is the case, please refer
to the following steps:
1. Create a new parameter named NewAccountNumber, set its data type the same as @AccountNumber, select Allow multiple values, set Visibility to be hidden, then set all available values to default values.
2. Right-click the first sub report and open Subreport Properties dialog box, click Parameters in left pane, set name to AccountNumber, then click (fx) button, type the expression like below:
=Parameters! NewAccountNumber(0)
3. Click Visibility in left pane, select Show or hide based on an expression, then click (fx) button and type the expression like below:
=IIF(InStr(Join(Parameters! AccountNumber.Value), Parameters!NewAccountNumber.Value(0))>0 , false,true)
4. Modify parameter of other sub reports like step2.
5. Set visibility of other sub reports like step3.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

How to specifically sort the data in a database using c#?

H!,
I have a problem in c# that require sorting of names of students in a sql database and i want it to be specific, i used data grid view to view the data of the students as shown below:
Students First Name:
Ann
Antoinette
Brenda
Judith
Lester
Santos
Suzie
Tim
if i type in a letter or abbreviation @ a textbox1 for example "s", all Names that starts with letter s will be sorted first so the output now of the query will become:
Students First Name:
Santos
Suzie
Ann
Antoinette
Brenda
Judith
Lester
Tim
So if i type j, all that starts with j will be first, and so on.
I need help for this problem coz it is so hard for me to output the students with this kind of sorting and is there a code or query string related to this problem?
thanks in advance.
Hardz

Hi,
One way is to write a query as shown below:
declare @char nvarchar(1)
select @char = 'S'
Declare @t table(name nvarchar(max))
insert into @t
values
('Santos'),
('Suzie'),
('Ann'),
('Antoinette'),
('Brenda'),
('Judith'),
('Lester'),
('Tim')
select name
from @t
where RIGHT(name,1) like @char
union all
select name
from
(select top 100 percent name
from @t
where RIGHT(name,1) not like @char
order by name) a
Hope this helps.
-Chintak

Sort the data set after quering

Similar Messages

Maybe you are looking for