Sound blaster omni surround 5.1 problem with mp3 player line in

For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg

Originally Posted by xnathanmeyerx
For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg
Hey xnathanmeyerx,
Please select Line-In of Sound Blaster Omni Surround 5.1 as the default Input for the Mac computer. It can be configured at Sound under the Mac System Preferences. I hope this helps.
All the Best!!
Yours sincerely,
JL

Similar Messages

Sound Blaster OMNI Surround 5.1 - input issue

Hi there all,
Purchased one of the above units today after sales person confirmed I could input three channels. I have three radios and wanted to take there mono output and put 2 into 1 for Line-In (Stereo) and 1 into Mic-in (Mono).
Have tried everything and can't have both Mic-In and Line-In active at the same time in Win7, reviewing manual and sales images its show you can attached to line-in and to Mic-in but does not say anywhere you can only use one at a time.
Can someone please confirm if its possible to use both Line-in and Mic-in at the same time or not.
Many thanks
Dave

Originally Posted by xnathanmeyerx
For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg
Hey xnathanmeyerx,
Please select Line-In of Sound Blaster Omni Surround 5.1 as the default Input for the Mac computer. It can be configured at Sound under the Mac System Preferences. I hope this helps.
All the Best!!
Yours sincerely,
JL

Problem install driver sound blaster Omni surround 5.1

Hi, I have just bought this sound card. My computer is using win 7. But when I insert CD and install driver. Then I can't install it and the message below is showed:
"Setup is unable to detect a supported product on your system"
Please help me resolve it .
Thank you so much

Maybe you are connecting your Omni Surround 5.1 to a USB hub. How about trying to connect the device to another empty USB port?
Maybe you can try to disable your on board sound card in the bios to see if it works.

Sound blaster x-fi xtreme gamer - problem with headpho

Hi,I've install the card and i want to use the creative speakers and headphones as well. (seperatly offcourse, but connected together)Is it possible at all to connect both of them together?for instance, creative shows in the manual picture to connect the headphones in line, and the speakers in 2.but i can only hear the speakers or the headphones when i connect them in line ... I thought that i can "program" some jack? ( like in most motherboards) to do that as well, but i saw the the "flexijack" option is all grey and cannot be used. If some one here know/had this problem, i would appreciate some help/advice. Thanks in advance,??

Hi,
Did this happen right out of the box or do you own the card for some time now?
Just in case, please ensure that the sound card is firmly seated on the pci slot.

Problem with mp3 Player in Safari

Here's my page again.
http://charlesnewmanpubl.com/catalog.html
So it looks like I have this page just as I want it. But I'm seeing an odd issue.
When you click on any of the tracks in the cd, it calls a function which changes the album art, plays the track, and gives you a button where you can download the track.
This all is working great. But in Safari, not in Firefox (I haven't tested this in IE as yet. No access to a PC), when you click the download button, the time as shown in the player displays only the amount of time between the page load, and when you clicked the download button. And the player will stop playing at that point. So say you have a track which the player initially reports as being 5:23, then you click a few seconds later on the download button, the time for the track will display as only 0:45, and will only play to that point and then stop.
As I said, this not happening in Firefox.
Can someone help me to understand what's going on, and what to do about it?
Thanks.

It's my website's server. I'm not sure, but I think they run Windows. It's pair.com.
I found a browser check, very long.
var BrowserDetect = {
     init: function () {
          this.browser = this.searchString(this.dataBrowser) || "An unknown browser";
          this.version = this.searchVersion(navigator.userAgent)
               || this.searchVersion(navigator.appVersion)
               || "an unknown version";
          this.OS = this.searchString(this.dataOS) || "an unknown OS";
     searchString: function (data) {
          for (var i=0;i<data.length;i++)     {
               var dataString = data[i].string;
               var dataProp = data[i].prop;
               this.versionSearchString = data[i].versionSearch || data[i].identity;
               if (dataString) {
                    if (dataString.indexOf(data[i].subString) != -1)
                         return data[i].identity;
               else if (dataProp)
                         return data[i].identity;
     searchVersion: function (dataString) {
          var index = dataString.indexOf(this.versionSearchString);
          if (index == -1) return;
          return parseFloat(dataString.substring(index+this.versionSearchString.length+1));
     dataBrowser: [
               string: navigator.userAgent,
               subString: "Chrome",
               identity: "Chrome"
          {      string: navigator.userAgent,
               subString: "OmniWeb",
               versionSearch: "OmniWeb/",
               identity: "OmniWeb"
               string: navigator.vendor,
               subString: "Apple",
               identity: "Safari",
               versionSearch: "Version"
               prop: window.opera,
               identity: "Opera"
               string: navigator.vendor,
               subString: "iCab",
               identity: "iCab"
               string: navigator.vendor,
               subString: "KDE",
               identity: "Konqueror"
               string: navigator.userAgent,
               subString: "Firefox",
               identity: "Firefox"
               string: navigator.vendor,
               subString: "Camino",
               identity: "Camino"
          {          // for newer Netscapes (6+)
               string: navigator.userAgent,
               subString: "Netscape",
               identity: "Netscape"
               string: navigator.userAgent,
               subString: "MSIE",
               identity: "Explorer",
               versionSearch: "MSIE"
               string: navigator.userAgent,
               subString: "Gecko",
               identity: "Mozilla",
               versionSearch: "rv"
          {           // for older Netscapes (4-)
               string: navigator.userAgent,
               subString: "Mozilla",
               identity: "Netscape",
               versionSearch: "Mozilla"
     dataOS : [
               string: navigator.platform,
               subString: "Win",
               identity: "Windows"
               string: navigator.platform,
               subString: "Mac",
               identity: "Mac"
                  string: navigator.userAgent,
                  subString: "iPhone",
                  identity: "iPhone/iPod"
               string: navigator.platform,
               subString: "Linux",
               identity: "Linux"
BrowserDetect.init();
I'd like to shorten this just to look for the Specific Browser, Safari, and any version earlier than 4.0.2, and Mac OS, any earlier than 10.5.7, and with the onClick event, then give an alert to warn the user either not to Download until the track is finished playing, or upgrade their browser.

Sound Blaster omni 5.1 doesn't work with Yosemite 10.10.1

Hi all! My SoundBlaster omni 5.1 doesn't work with Yosemite 10.10.1 (installed driver for Yosemite 10.10). Equipment in system is displayed properly, like "Sound Blaster Omni Surround 5.1". And SB is set as active. Volume controller is active (system shows volume adjustment). But there is no sound on output (either) and mic doesn't catch the signal.With MS Windows 8.1 it works good. Therefore I suppose problem not in hardwear, most likely in drivers.Does anybody have the same problem?

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

Problem: Sound Blaster Arena Surround USB Gaming Headset

Hello
I have one of these Sound Blaster Arena Surround USB Gaming Headset, which are 7..
I have Windows 7 as OS on my computer and it gives me a few problems.
W7 recognises the headset as a "Stereo" headset. The headset has a Sound Card of it's own and uses the drivers that come with the Installation CD for Surround settings that are mad in Audio Control Panel or Creative Entertainment Console.
This is a problem.
For example. Playing Call of Duty 5: World at War.
The audio settings on this game, always (and is unchangeable) goes after the default Audio Device. And then it recognises my Headset. And puts in STEREO config. Since it was W7 recognises, and I cant change that on the game and neither on the Audio Settings on the computer. Which make the subwoffer and Surround effects useless which is a hard bummer, since it's such an awesome headset and is totally awesome when i play Battlefield: Bad Company 2.
I really want to know how I can fix this! Please help me. Any settings or special config in the cfg files you can do on Call of Duty 5 or and settings or stuff I can do to change so W7 recognises my headset with the 7.!

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

No left audio. No serial. Sound Blaster Arena Surround usb Gaming Headset.

I have a Sound Blaster Arena Surround usb Gaming Headset and the left speaker no longer works.
I have tried the headset on multiple computers ranging from xp to vista to 7. some have different versions of the driver. On all the left audio is silent.
I would like to redeem my warranty because I bought the product on 08/04/10
But I no longer have the box or booklet that came with it and therefore can’t get the serial number for the device.
Is there anything you guys can do to help me?
The closest article I could find to this problem was here http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-problem/m-p/558966#M2001. So it appears I must wait for an admin to help.

Thanks!
Very handy info.
I went to http://rma.creativelabs.com/OnlineRMA/EnterProduct and that section required I have a legit serial number.
Thanks!

Sound blaster Audigy 2 zs gamer problem!

(Sound blaster Audigy 2 zs gamer problem!? I had a recent problem recently that caused Windows not to load at all. After getting that fixed and the computer back home I have run into a sound issue. None of the Creative's Media Source programs would work properlly. When clicked on I would get the error that the program has encountered an error and needs to close. Finally un-installed all creative programs and related software and went through the re-install process. Encountered an error that program could not load because plxcore.plx cannot be found. I went through the solution listed on?Creative's web site to fix the?issue and none of fixes worked. Recently deleted everything Creative again by uninstalling all drivers and going through the installshield folder and deletd all creative related items. Went through the install process again. Had the plx error, fixed it and had sound but had the same problems with the Media SOurce as before. Went to Creative's web site through auto updater for a new driver and other essential items needed for my sound. Back to no sound again. Under Windows control panel under sounds and audio devices under volume tab, it will not even let me select the speaker setting or place the volume control on the task bar. @99.3.9.75

Brettpopp
Try updating your BIOS to the latest and have the sound card tested on another machine to see if it is still functioning.
Jason

How does one enable Stereo Mix on the Sound Blaster Arena Surround USB Gaming Headset

I'm usually streaming games and I picked up this headset to replace my old gear.
I've noticed in 32-bit XP Pro I do not have the option to enable stereo mix which was how i was able to stream game audio and commentary on.
Does a work around exist to enable stereo mix or to otherwise transmit audio from both the input and playback sources?
BTW I've also posted this on the Livestream forums to see if I can get a bite.

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

Sound Blaster Arena Surround USB Gaming Headset broken

6Sound Blaster Arena Surround USB Gaming Headset broken?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#t384326">Original post on tom's hardware[/url]
Hello,?
My cat jumped off my?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#">computer[/url]?desk while I was wearing my?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#">headphones[/url]. The result was the wires separating from the USB end. They are quite distinguishable and not impossible to solder. However knowing which wire corresponds to which solder point is beyond me. I contacted Creative. They will not help me. If anyone has a Sound Blaster Arena Surround USB Gaming Headset and would be willing to open up the plastic housing on the USB end to tell me what goes where I would greatly appreciate it. Also the plastic housing will go back together. If any additional info is necessary, please inquire.
[img"]http://img76.imageshack.us/img76/3769/arenaheadsetwiringdiagr.png" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img685.imageshack.us/img685/876/p000896y.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img846.imageshack.us/img846/869/p000899.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img860.imageshack.us/img860/4259/p000898.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Problems with DVD Player 3.0.1 in G4/466

Problems with DVD Player in G4/466
Yes, I've a g4/466 with two disks. In the first there's system 9.2.2 and the DVD player goes perfect. In the second I've system 10.2 and the 9.2, and the DVD Player (3.0.1) on the system 10 begins to jump in the dock, but stop and nothing happens, I can't open it...
There's any way to reinstal it form system disks???
Or any download to check the error?
Thanks

1. Try using Pacifist to extract it from your Mac OS X 10.2 installation disks, and then run the combo updater for your version of Mac OS X and any applicable DVD Player updates.
2. Open the Console application in the /Applications/Utilities/ folder and look for lines relating to the DVD Player.
(18543)

I have problem with Flash Player. Full screen doesn't work correctly. Turning off hardware acelleration helps but I want this option to work.

Problem exist only on YouTube. When i want get full screen, I have black screen with audio. If I click few times full screen button it helps, but I want to go to full screen by one click.
If i turn off hardware acceleration everything is ok but vids looks terrible.
I have this problem with Flash Player 10. No 9 works good, but some websites wants no. 10

Generaly FP works, but problem is that i must press few times full screen button. Now i have turn off hardware accelleration, but movies are quite bad.
I have already installed newest graphic drivers but it didn't help.
Everything was good unless Flash Player and Mozilla notificated that update is necessary :<

Problems with flash Player

So I'm having a problem with flash player, and was wondering if anyone has experienced the same thing, or might be able to help.
- Upgraded 2 computers to snow leopard, macbook pro laptop, and mac Pro tower (intel proc).
- Laptop has no problems, everything renders fine, and without any difficulty.
- Mac Pro doesn't display any dynamic data, text fields show up blank, some flash player controls don't work, brightcove player won't load completely... things are just not working right.
- Main browser is Safari, but same problem exists in Camino, Firefox, etc...
- I've had Safari Stand installed, but have since removed it.
- I've removed GROWL notifications completely
- I've got debug and developer menus turned on (but have that with the laptop also.)
Please see the screenshot attached. This graph should have text data on it showing the x/y axis, the key, as well as data when you mouse over each block, but doesn't show anything.
The second screen shot shows a brightcove player from our website... There should have full controls at the bottom, and nothing shows up. If I right-click, and go to 'view full screen', I can't then get out of full screen by clicking escape key on the keyboard, I have to use any player controls, or right-click again, and hit 'exit full screen'.
Anyone have any suggestions? It's something to do with my computer, rather than snow leopard, because flash works fine on my laptop, but not on the desktop. Any help is really appreciated !

Hi!
I reached your post because I was having the exact same issues as you and I found a fix that worked for me! The problem is a font issue: I logged in with the guest account that had no users font installed and flash was working fine, so I logged back into my account and moved all the fonts in my 'User>Library>Fonts' folder in a folder in the desktop. Then I closed and reopened Safari and Flash was working!
In the end the problem was with a version of Arial that I had in my users' font folder: I deleted just that, put my users' font back in the folder and the problem disappeared.
I hope it hepls!
best
nicola

Sound blaster omni surround 5.1 problem with mp3 player line in

Similar Messages

Maybe you are looking for