.../sound/core/snd-page-alloc.ko.gz': No such directory -- [solved]

I lost my sound when I tried loading the manufacturers driver. So I went to the Arch wiki page and followed the steps to set up but this is what I get (Making sure the sound modules are loaded--section).
https://wiki.archlinux.org/index.php/Ad … figuration
[joe@Tux-Box ~]$ modprobe snd-hda-intel
WARNING: Could not read '/lib/modules/3.1.8-1-ARCH/kernel/sound/core/snd-page-alloc.ko.gz': No such file or directory
WARNING: Could not read '/lib/modules/3.1.8-1-ARCH/kernel/sound/core/snd.ko.gz': No such file or directory
WARNING: Could not read '/lib/modules/3.1.8-1-ARCH/kernel/sound/core/snd-timer.ko.gz': No such file or directory
WARNING: Could not read '/lib/modules/3.1.8-1-ARCH/kernel/sound/core/snd-pcm.ko.gz': No such file or directory
WARNING: Could not read '/lib/modules/3.1.8-1-ARCH/kernel/sound/core/snd-hwdep.ko.gz': No such file or directory
WARNING: Could not read '/lib/modules/3.1.8-1-ARCH/kernel/sound/pci/hda/snd-hda-codec.ko.gz': No such file or directory
FATAL: Could not read '/lib/modules/3.1.8-1-ARCH/kernel/sound/pci/hda/snd-hda-intel.ko.gz': No such file or directory
It looks like the install script wiped out all the previous modules.
I then followed the wiki link to the "Alsa Sound Card Matrix" and selectd hda-intel and ran the command below which based on this sight indicates the module is loaded.
[joe@Tux-Box ~]$ modinfo soundcore
filename: /lib/modules/3.1.8-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
vermagic: 3.1.8-1-ARCH SMP preempt mod_unload modversions
parm: preclaim_oss:int
So at this point I am confused and not sure what to do to correct.
Any direction would be appreciated as the only solution I can think of is to rebuild the system which I don't have the time for currently.
Some more info....
[joe@Tux-Box ~]$ lspci | grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) --- On Board audio which I have been using.
01:00.1 Audio device: nVidia Corporation GF106 High Definition Audio Controller (rev a1) -- Audio built into my Video card which I don use.
Thanks in advance for your direction
Last edited by jv2112 (2012-01-14 15:17:32)

I ran
packer -Syu
which then reloaded the linux headers and ran udev & viola ---- Sound

Similar Messages

Sound problems snd-via82xx [solved]

ok ive benn messing with this for several hours now
i did a pacman -Syu today which has left me without sound
ive searched the boards here & a couple of other places
also looked here
http://alsa.opensrc.org/index.php?page=via8233
hopefully heres all pertinent info i can think of to post
hwdetect --show-sound
SOUND : snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-page-alloc snd-pcm snd-rawmidi snd-timer snd snd-mpu401-uart snd-ac97-bus snd-ac97-codec snd-via82xx soundcore
lspci
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 60)
Subsystem: Asustek Computer, Inc.: Unknown device 810d
Flags: medium devsel, IRQ 19
I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-via82xx
alias sound-slot-0 snd-via82xx
alias snd-card-1 snd-mpu401
options snd-mpu401 port=e000 irq=19
alias sound-slot-1 snd-card-1
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-1 snd-seq-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
# --- END: Generated by ALSACONF, do not edit. ---
thanks for the help in advance

MOD_AUTOLOAD="yes"
MODULES=( snd-mixer-oss snd-pcm-oss snd-page-alloc snd-timer snd snd-ac97-bus snd-ac97-codec snd-via82xx)
DAEMONS=(syslog-ng hwd !hotplug !pcmcia network netfs crond alsa)
i was looking through the forums found this thread
http://bbs.archlinux.org/viewtopic.php?t=17619
although im not having the same problem ,i am having difficulty & downgrading the kernel doesnt help thinking bout it i havent tried downgrading alsa yet will try tommorrow
while booting up i see when modules are being loaded i hear a tic come from my speakers
another problem i noticed today while starting gnomad2 for my mp3 player it tells me i dont have permission i looked in udev.rules to make sure i belong to all needed groups which i am
gnomad2 works in root but no sound
thanks

No sound after 2.6.27.1-1 update XPS M1530 [solved]

I have no sound on my kdemod 4 after kernel 2.6.27.1-1 update
Last edited by venky80 (2008-10-21 17:24:56)

i have put the following in my rc.conf file
MODULES=(!snd_pcsp !pcspkr !snd-pcsp acpi-cpufreq cpufreq_ondemand cpufreq_conservative cpufreq_powersave sky2 iwl4965 snd-hda-intel snd snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer soundcore loop fuse vboxdrv tun)
still I have no sound
Last edited by venky80 (2008-10-21 01:56:06)

I am trying to put sound fonts into a playable format in garageband. I followed all of the instructions on the sound font help page for Garageband, but I still cannot play the sounds, or get them to show up. Any suggestions?

I am trying to put sound fonts into a playable format in garageband. I followed all of the instructions on the sound font help page for Garageband, but I still cannot play the sounds, or get them to show up. Any suggestions?

Sorry, I was confused by your profile signature showing "GarageBand (Mac) '11".
It is very similar in the newest GarageBand 10.0.2:
Enable Audio Units in the GarageBand Preferences > Audio/Midi.
Create a software instrument track.
Show the Smart Controls and click the button.
In the Info panel scroll, to make the Audio Units brick visible and click the "Instrument" control. Select "AuInstrument > Apple > DLSMusicDevice" and click it, to open the settings.
This should show you a panel, where you can select a Sound Bank. Does that show your sound font?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

HT4363 I have sound but no picture In AirPlay. How can I solve?

I have sound but no picture In AirPlay. How can I solve?

depend on what the airplay source is
if it's not a source which support airtunes mirror you will likely never get anything else
ipad2 and later
iphone4s and later
support mirror
macs
http://support.apple.com/kb/ht5404 listed macs with mtn lion support it
anything else will only do audio

I can't get to the Firefox Start Page which has menu items such as Bookmarks, toll , etc

I can't get to the Firefox Start Page which has menu items such as Bookmarks,Tools , etc.Also there is no back arrow.
== This happened ==
Every time Firefox opened

'''''"menu items such as Bookmarks,Tools , etc"''''': That's the Menu Bar; see below.
'''''"Also there is no back arrow"''''': That's on the Navigation Toolbar; see "'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''" below. Also see the articles under "Also see:" at the end of the instructions.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''

Page size limitation on Sun ONE directory server 5.2

Hi All,
How do i know what is the Page size limitation on Sun ONE directory server 5.2?
How do i cahnage it?
Best Regards,
Ayelet Regev
[email protected]

I enabled SSL in SUN ONE Directory Server 5.2, I use the following code to download the server certs,
 Hashtable env = new Hashtable(11);
 env.put(Context.INITIAL_CONTEXT_FACTORY,
 "com.sun.jndi.ldap.LdapCtxFactory");
 env.put(Context.PROVIDER_URL, "ldaps://bharatkumar.webm.webmethods.com:636/o=in");
 env.put(Context.SECURITY_AUTHENTICATION, "EXTERNAL");
 env.put(Context.SECURITY_PROTOCOL, "ssl");
 try {
 // Create initial context
 DirContext ctx = new InitialDirContext(env);
System.out.println(ctx.lookup("ou=web"));
ctx.close();
 } catch (NamingException e) {
 e.printStackTrace();
But it throws the following error:
javax.naming.CommunicationException: SASL bind failed: bharat.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: sun.security.
validator.ValidatorException: PKIX path building failed: sun.security.provider.c
ertpath.SunCertPathBuilderException: unable to find valid certification path to
requested target]
at com.sun.jndi.ldap.LdapClient.authenticate(LdapClient.java:220)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2637)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:283)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193
How to rectify the above error?
Kindly Help me.
Thanks,
Bharat

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

No sound with snd-hda-intel (Realtek ALC260)

Hello,
I've been trying to make my sound work with no success, i'm basically in the same case as this topic : https://bbs.archlinux.org/viewtopic.php?id=17347 but hints are references to now dead links.
I've played with modprobe and different settings like :
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=generic
with no success.
Here some more infos on my system :
[caribou@arch ~]$ lsmod|grep snd
snd_hda_codec_realtek 62023 1
snd_hda_codec_generic 57972 3 snd_hda_codec_realtek
snd_hda_intel 25959 4
snd_hda_controller 26327 1 snd_hda_intel
snd_hda_codec 93753 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 12906 1 snd_hda_codec
snd_pcm 73796 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 22010 1 snd_pcm
snd 55101 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore 12895 2 snd,snd_hda_codec
[caribou@arch ~]$ lspci -vv|grep Audio
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
[caribou@arch ~]$ grep Codec /proc/asound/card*/codec*
/proc/asound/card0/codec#0:Codec: Realtek ALC260
/proc/asound/card0/codec#1:Codec: Conexant ID 2bfa
[caribou@arch ~]$ cat /proc/asound/devices
2: [ 0] : control
3: [ 0- 0]: digital audio playback
4: [ 0- 0]: digital audio capture
5: [ 0- 1]: digital audio playback
6: [ 0- 0]: hardware dependent
7: [ 0- 1]: hardware dependent
33: : timer
(unfortunately i don't have any headphones to test if that part is working)
Thanks for your help.

I removed the three lines and rebooted.
I'm not sure what i should test with pavucontrol but there is at least a VUmeter corresponding to a song i'm playing.
I did a speaker-test again still nothing.
Here is the output of pulseaudio -v
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 02ffa703a637440786483fd98ffaeac4.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/caribou/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/caribou/.config/pulse/02ffa703a637440786483fd98ffaeac4-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/caribou/.config/pulse/02ffa703a637440786483fd98ffaeac4-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/caribou/.config/pulse/02ffa703a637440786483fd98ffaeac4-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA Intel/HDA Intel.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1b.0.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_1b.0"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_1b.0.analog-stereo: front-left: 61310 / 94%, front-right: 61310 / 94%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "ALC260 Analog"
I: [pulseaudio] sink.c: alsa.id = "ALC260 Analog"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "0"
I: [pulseaudio] sink.c: alsa.card_name = "HDA Intel"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA Intel at 0x80000000 irq 41"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "8086"
I: [pulseaudio] sink.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] sink.c: device.product.id = "2668"
I: [pulseaudio] sink.c: device.product.name = "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
I: [pulseaudio] sink.c: device.form_factor = "internal"
I: [pulseaudio] sink.c: device.string = "front:0"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176400"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "Realtek ALC260"
I: [pulseaudio] sink.c: alsa.components = "HDA:10ec0260,104d0000,00100300 HDA:14f12bfa,104d0200,00090000"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Built-in Audio Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel at 0x80000000 irq 41"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.id = "2668"
I: [pulseaudio] source.c: device.product.name = "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "0"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -128.00 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-ALC260 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-ALC260 Analog] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "ALC260 Analog"
I: [pulseaudio] source.c: alsa.id = "ALC260 Analog"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel at 0x80000000 irq 41"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.id = "2668"
I: [pulseaudio] source.c: device.product.name = "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "front:0"
I: [pulseaudio] source.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] source.c: device.buffering.fragment_size = "176400"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c: device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] source.c: alsa.mixer_name = "Realtek ALC260"
I: [pulseaudio] source.c: alsa.components = "HDA:10ec0260,104d0000,00100300 HDA:14f12bfa,104d0200,00090000"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from 0.00 dB to 35.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -35.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-ALC260 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-ALC260 Analog] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #7; argument: "channels=2").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #13; argument: "").
I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c1"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
I: [pulseaudio] main.c: Daemon startup complete.
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-source-ALC260 Analog] alsa-source.c: Device suspended...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC260 Analog] alsa-sink.c: Device suspended...

No sound: alsa snd-hda-intel macbook pro

I can't get sound to work on my macbook pro and I'd appreciate some advice. lspci shows the following soundcard:
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
According to the alsa sound card matrix, this card uses the snd-hda-intel module. I've followed the alsa article at http://wiki.archlinux.org/index.php/ALSA. Here's what I'm seeing:
# lsmod|grep '^snd'
snd_seq_oss 29312 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46800 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
snd_pcm_oss 36896 0
snd_mixer_oss 14464 1 snd_pcm_oss
snd_hda_intel 286624 0
snd_pcm 68996 2 snd_pcm_oss,snd_hda_intel
snd_timer 19332 2 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_hwdep 7300 1 snd_hda_intel
snd 44644 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
# ls -l /dev/snd
total 0
crw-rw---- 1 root audio 116, 1 Nov 11 19:47 seq
crw-rw---- 1 root audio 116, 33 Nov 11 19:47 timer
# cat /etc/modprobe.conf
# /etc/modprobe.conf (for v2.6 kernels)
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.15 ---
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
# amixer
amixer: Mixer attach default error: No such device
# /etc/rc.d/alsa start
:: Restoring ALSA Levels [BUSY] /usr/sbin/alsactl: load_state:1327: No soundcards found...
[FAIL]
According to the wiki article, there should be controlC0 and pcmC0D0p devices under /dev/snd. I think the module isn't being installed correctly.
My system is a 2nd generation macbook pro. I've read that support for my card was recently added to alsa. I've had sound working under gentoo and debian by compiling snd-hda-intel statically into kernel 2.6.21. Can anyone give me advice on how to get this working?
BTW, I'm new to Arch, and I'm really impressed with it so far. Apart from sound, everything has worked well.

I'll give kamikaze-sources a try. Thanks. What exactly is kamikaze-sources? Neither the AUR page or the homepage (http://kamikaze.waninkoko.es) really explains it.
Has anyone gotten this this sound card to work in Arch and what exactly did you have to do? Unless kamikaze-sources is really easy to install, I'll probably just compile a custom kernel.

Can I embed 'invisible' sounds to InDesign pages? (i.e. without a player icon appearing in the PDF)

Hello, I am trying to export a PDF presentation from InDesign. I would like to add sounds so that as I go from page to page in the exported PDF a sound plays automatically (without me having to click to start it). I have worked out how to do this, but InDesign seems to create a player icon in the PDF which is a distraction. Is it possible that the sound can be embedded and play without adding anything visual? Any help would be greatly appreciated as I have spent all day without any luck.

Sounds can be embedded without having a poster image. Just choose None for Poster Image on the Media panel.

Youtube video sound restarts when page back!

Since i updated flash player a few days ago i have this strange issue with flash player on youtube, i watch a video, than i go back a page, and on the previous page the previous video starts to play again, only the sound though! Today i received a update for Flash but it did not fix the issue! I am not the only one as seeing the many youtubers pointing out the issue here:
https://productforums.google.com/forum/#!msg/youtube/x8JDpBkYBzM/dHzEjNZhqNMJ

What OS?
What browser?
Just my $0.02... if you leave a page and the content on the previous page still plays, you've got some serious browser problems, or a video/audio hardware problem, in that your connection is going faster than the hardware can keep up with.

Can I use a sound file on Pages?

I want to create a picture book for kids to run on iPad and Iphone -- it will have a voiceover -- so the user can turn the voice on or off.
Would Pages be a suitable program for this?
Can I put a sound file in a Pages doc for this purpose?

You can drag in any media into Pages, but be aware that it is only accessible in the .pages document itself.
Why not have a look at iBook Author which is based on Pages and much more suitable for what you want?
Peter

.../sound/core/snd-page-alloc.ko.gz': No such directory -- [solved]

Similar Messages

Maybe you are looking for