Sound faster than video problem

I just finished a movie in Flash Mx Pro 2004, and whenever i
play the movie, on the eight scene the sound starts moving faster,
and the video stays the same speed. I think the sound jumps ahead
like 10 seconds and then starts going the same speed.
I don't think it's a problem with my computer, it should be
able to handle the movie.

I just did some tests with the movie, and now im sure that
the sound is moving faster, not just ahead by 10 second for the
whole movie.

Similar Messages

  • The video sound faster than video ipad mini, this happen when I download the iOS 7.1 to my iPad mini, how can I fix that?

    The video sound faster than video ipad mini, this happen when I download the iOS 7.1 to my iPad mini, how can I fix that? Or just wait till Mac release a new version update, also some game and apps doesn't open or when open they close, please help!!!

    Start by closing all apps and resetting your iPad and see if that helps with any of your issues.
    To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it. Close all of the apps on the iPad this way.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Audio recording/playback plays too fast, faster than Video

    : Whenever I record sound from my computer, whether it's from my mic or just sounds playing on the computer, the recorded file always plays the audio faster than the video. I've checked the drivers and re-installed several times, even reformatted and it's still the same thing. I even played around with the hardware acceleration meter with trial and error and it end's up always the same.
    What could be the problem?

    Try turning off automatic exposure in the settings. And adjust some of the other settings (gamma, brightness, exposure) until you get a picture which you're happy with. And try that. In the UK, films are made at 24fps (frames per second) PAL format, and in America it's 30fps NTSC format. So yes, 30fps is as good as it gets! It's as good as TV and better than a lot of other webcams.

  • Why does audio run faster than video after burning my iMovie project in iDVD?

    I created a project in iMovie HD and shared it to iDVD 6. When I played the finished disc, I noticed that the audio ran much faster than the video. I rechecked my movie and audio clips in iMovie to make sure they were matched correctly, and I saw no problem there. I burned the disc again through iDVD and got the same problem when I played it in a DVD player.
    I have never had this problem before and I've been working on dvd projects all week. I think the only difference with this movie project is that I had movie clip audio and background audio playing at the same time at some parts of the movie, but I don't know if that's the issue.
    Any suggestions?

    Hi
    And just to add to OT-s brilliant suggestions - really - Do a Save as a DiskImage ! IMPORTANT !
    • When free space goes down on the Start-Up hard disk to 5Gb or less - strange things occurs - Yes even audio out of sync - to not working DVD at all.
    I secure a minimum of 25Gb free space when using SD-video to iDVD - if HD material I would guess 4-5 times more as it has to be re-calculated into SD and this needs space.
    DVD - is as standard SD-Video (as old time CRT-TVs) - even if You use DVD-Studio Pro or iDVD or Roxio Toast™ - That's what it is and using HD material doesn't improve a bit (may be even give a lesser result)
    Yours Bengt W

  • Unlike others I'm hearing sound but not very well - faster than video play!

    The topic is concerning audio and video adjustment with movies in Quicktime Pro.
    I have an avi file that, at first, was not playing the movie (white screen). I quite properly (and proudly, for I'm not a smart one when it comes to technology) installed a 3ivx codec to fix that, now it's fabulous.
    The problem that I have now (and it was ever present even before I fixed the white screen, I was just not paying attention) is that the audio and the video lengths do not line up (they should).
    I checked the properties, and it confirmed my confusion: the length of the movie hits 2hours 2 minutes, while the audio (which plays at the same length (normally) on my Windows Media Player) is logged at 1Hour 38minutes.
    I tried downloading more filters/codecs to fix this, but nothing has helped. The information tells me that the audio is fomatted with Mpeg Layer 3.
    How on earth do I get my audio to match up with the video?
    Please help!
    Thanks!

    Thanks so much to everyone. I am defiantly going to get one (I didn't need a lot of persuasion) just going to narrow it down between the 20" and the 24" now. I will for sure wait through MacWorld just to see if anything big comes out of it. I know about other displays but part of the iMac appeal is the sleekness of it all to me. Getting rid of my speakers, and thousands of cables seems almost too good to be true. I figure if I fall in love with the iMac I will pick up a 13" MacBook also.
    Sims 2 I might play but knowing it will work in Bootcamp is fine. A few months ago the Apple store showed us that program. Orange box is way more of a game then I will ever play. My husband will but, he'll do that on a console. He has the giant end all end all PC's but says what he knows will happen is that he'll love the iMac and want a Mac too. Its exactly what happened with my iPhone. I got one he loved it and promptly sold his Treo for an iPhone.
    I have owned a Apple in the past. I had an Apple IIc.

  • Sound is faster than video in quicktime

    I use an external mic bc the internal one *****. Every time i record a video the video and audio do not match. Its really annoying bc im trying to post onto youtube and it won't work! please help

    Netflix requires Silverlight.
    Try deleting Silverlight and reistalling the latest Silverlight.
    http://www.microsoft.com/silverlight/
    https://www.microsoft.com/getsilverlight/get-started/install/removing-silverligh t-mac.aspx
    http://www.microsoft.com/getsilverlight/get-started/install/uninstall-mac.aspx
    https://help.netflix.com/en/node/2088

  • Audio going 10x faster than video

    That is probably a pretty horrible title, and it may be inaccurate.  I am using Adobe Premiere Elements 11, and I opened a 3minute and 12 second video and audio clip of me playing drums.  When I place it on the timeline, the audio in the audio track is all jumbled within the first 20 seconds.  When I play it, it sounds like the audio is going at a super high rate of speed. (i.e 10x faster, probably more, actually)  The video then continues to play for the remainder of it's duration, without any audio.  I'm not sure what other information you might need.  Any help would be appreciated.
    Oh yeah, I'm using an Acer laptop with Windows 7 64-bit,  a Dual core 2.2 GHz processor, 3gb RAM, 5400RPM 320gb hard drive.  I realize those specs are pretty weak, but I don't feel like that would be causing my problem, but who knows.
    Also, the file is a .mov file from a ZoomQ3HD.

    Master Lomaxus
    Could you please post the Tree version of the MediaInfo readout? To get at it you can click on the arrow at the end of the message at the middle right side of the readout that you posted? I am particularly interested in the audio codec and if it is twos. I have found that to be a very problematic audio codec in at least one instance where I had to deal with it with a user.
    Your video codec represented as AVC is probably H.264. And, it looks like the file has the .mov file extension. To me, the rest of those video properties appear atypical, that is, 848 x 480 16:9 @ 59.94 frames per second (probably progressive).
    As a consideration for your troubleshooting, I would offer a manually set Premiere Elements project preset of:
    NTSC
    AVCHD
    AVCHD 1080p60
    But before all that, you might want to read about my prior encounter with twos audio and decide if the issues in the following apply to your situation as well. If they do, you may want to check out my suggestion to the user in that case. (See Post 8 in the thread cited)
    http://www.elementsvillage.com/forums/showthread.php?t=77558
    I realize the brand of camera is not the same, but...
    If any questions about that thread or this matter, please ask me here in your thread.
    Thanks.
    ATR

  • Audio plays back faster than video in Quicktime formats on Mac

    On both my iMac and MacBook Pro, both running Mavericks, 90% of videos dependant on the Quicktime codecs / engine have an issue where the video plays fine, but audio is almost always too fast. This results in the audio being of a higher pitch and drifting further and further out of sync. It affects videos played in Quicktime, the Quick Preview in Finder and even web-based video such as in HTML5 players. It's really weird that I can't find anyone else that is having this problem, and yet it is affecting both my machines! It's really frustrating as I work with video all day, and have to preview and review everything in VLC, which plays everything fine. Any ideas at all? I'm finding so many weird bugs and quirks in Mavericks I am strongly considering downgrading back to Mountain Lion, but I am dreading having to do two complete re-installs again.

    Which version of AME do you use on which OS version?
    If you are using VLC to playback, please update to the latest version.  I remember the older version had the MXF audio playback issue.  It seems this issue was fixed on the latest version.
    If this is not the case, could you try playing back this file on Adobe app such as Premiere Pro?  Do you see the same problem?

  • Audio faster than video

    My audio plays quicker than my video when I am previewing my clips. Any way to speed this up?

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Exactly what are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Audio is much faster than video streaming to AppleTV 3

    Trying to watch some music videos that play just fine in iTunes on the pc where they reside.  But when streamed to ATV 3 via homesharing the audio speeds up quite a bit.  Video is playing at the correct pace.

    Master Lomaxus
    Could you please post the Tree version of the MediaInfo readout? To get at it you can click on the arrow at the end of the message at the middle right side of the readout that you posted? I am particularly interested in the audio codec and if it is twos. I have found that to be a very problematic audio codec in at least one instance where I had to deal with it with a user.
    Your video codec represented as AVC is probably H.264. And, it looks like the file has the .mov file extension. To me, the rest of those video properties appear atypical, that is, 848 x 480 16:9 @ 59.94 frames per second (probably progressive).
    As a consideration for your troubleshooting, I would offer a manually set Premiere Elements project preset of:
    NTSC
    AVCHD
    AVCHD 1080p60
    But before all that, you might want to read about my prior encounter with twos audio and decide if the issues in the following apply to your situation as well. If they do, you may want to check out my suggestion to the user in that case. (See Post 8 in the thread cited)
    http://www.elementsvillage.com/forums/showthread.php?t=77558
    I realize the brand of camera is not the same, but...
    If any questions about that thread or this matter, please ask me here in your thread.
    Thanks.
    ATR

  • Video in my flash presentation playing faster than the animation

    I have a flash presentaion that contains flvs, devided to chapters,everytime a video ends (chapter ends) a flash animation runs (like title changing,and thunmbnails changing).
    the prob i m having is that on a core2quad, animation is faster than videos,and on p4 video is slower than animation.
    the best played presentation is on core2duo.
    how can we solve this prob?
    thanx

    Try calling Apple - (1-800-MY-APPLE)
    and/or you can try the online service assistant-
    http://www.apple.com/support/serviceassistant/overview.html
    Message was edited by: belovedjs

  • IPod w/video with sound synced to vid problem

    got my ipod/ video on Friday night. frustrated, I finally was able to get my own video to play on the ipod.
    problem:
    the video and the sound are out of sync. the video plays about a quarter second faster than the sound so it feels like I'm watching my family in a foriegn movie.
    am I encoding something wrong?!
    help
    ipod with video   Windows XP  

    found answer elsewhere

  • Problems running basic text in aftereffects faster than 19fps... what exactly do I need?

    OK, so I finaly upgraded my computer into the mild 21st century, and to my disapointment, I cannot seem to run anything as smoothly as I had thought.
    These are the specs for my computer...
    ASUS m5a99x EVO motherboard
    8 gigs ddr3 1600 ram
    NVIDIA 9800gt 1 gig ddr3 gpu
    AMD Phenom II x4 B50 Processor at 3.2ghz (IE its an AMD athlon II 450 X3 3.2ghz with its fourth core unlocked (of which i have had no problems with thus far, as it seems to be very stable)
    150 gig 7200 sata 2 harddrive (OLD)
    200 gig 5400 sata 2 hard drive (OLD AS SH*T)
    300ghz portable usb2 hd (7200) (2 years old)
    Basicly, I cant seem to run even basic text in after effects faster than 19 FPS.
    I've tried to change the resolution to half, and even a fourth, and that didnt work at all, infact it made it run about 1 frame worse.
    I tried changing the Open gl texture memory, raising and lowering, but to no avail, Ive changed the ram usage in after effects to use 2 gigs per core, then one gig, then turned off multiframe rendering alltogether, and nothing.
    I feel like ive tried everything in my power.
    Now the Imacs at my school, they run the program smooth as hell... and they arent that much better, spec wise than my computer.
    Even my friends Imac can run it smooth, and he only has an I5 cpu at 2.4ghz, which is fine and my understanding of cpus is that those are better proccessors, but its not that much better, and even still, why would that be neccesary just to run text scrolling accross the screen?
    Even more so, why would changing the resolution not have any effect?
    What exactly do I need to run after effects smoothly for a basic text scroll at say, 720P?
    I need to know what to upgrade, soon I plan to get cs6 and I would like to have a computer that can edit basic HD properly.
    What I realy dont get is that I know people with laptops that are running AE smoothly and these are much worse than the specs on my machine, some even with only 4 gigs of ram...
    Is there something wrong, do I have some sort of frame limiter thats capping at 19 fps? is there some sort of memory leak?
    Any help would be much apreciated.
    Now the only thing I can think of thats holding me back is the crappy hard drives, every thing else seems like it should at least run text on after effects at 30 fps.

    thanks, that at least is enough to get me started, lol I have a deadline tomorrow and have been burning a lot of time on just trying to get this to run smooth.
    BTW, I am running the project off of the portable, I switched from the old, but faster harddrive that was sata2 to the portable given I thought that might increase the speed, which it didnt.
    what I might do is crack the case and just plug it straight into the computer, though I am hesitant to do so as if I were going to do that, I might as well just purchase a usb 3.0 one and do that so i can get sata 3 out of it, since those cases dont exactly just snap back together.
    When I say basic text, I mean layered text, just word after word in order. I honestly dont have any plugins that I know of, (if I had the money for them I would have spent it on a better computer probably) so what I have is what came with the master collection.
    And when I say 19 FPS I mean spacebar...
    NOW I KNOW, that Im not garunteed 30 fps when running the preview, but when I use the mac, it previews fine... and i just looked up my CPU in comparison to the I5 in the IMAC that I was refering to, and mine is actualy faster according to some benchmarks, granted its not faster than the vast majority of I5s and I7s, but the particular ones in the computers I was refering to, mine is actualy faster over all, so I figure its not a CPU thing (unless its a -our software only works right on INTEL- thing).
    Now as far as the 3d camera, yes I am using it, but even when I run the text without a camera function (ie the thing that you have in your comp) or any sort of 3d layering it runs just as slow.
    The Audio might be a problem, I used to have a soundcard, but that died about a year ago so I have been using onboard sound (realtek HD something) which truly sucks in comparison to a proper sound card, but I cant imagine the IMACs have anything better, I mean the sound from the Imac kinda sucks alltogether, dosent even have any sort of virtual surround... But a driver issue it could be, realtek is kind of ghetto in that regard.
    I will try some of the tips above (the open gl and the preview output and such), and thank you very much.
    *EDIT*
    OK, so with the preview output, I have computer monitor only? is that what you ment?
    *EDIT*
    OK, so I did the OpenGL thing, removed it, and for a brief few secconds, it started to run at a mix of 25 to 30 fps, then, when I went to play it again, it was back at 19.

  • Video is faster than audio after capture....

    This is a problem that keeps popping up here and there. It's weird. I will do a capture from a Mini DV tape to a external Firewire drive and when you play the clip in FCP the video is played faster than the audio. When you put it on the timeline the audio is the correct duration but the video plays much faster and then just has black to finish out the clip.... The really funny thing is that when you go directly to the clip in the finder and open it with Quicktime it plays just fine. But when you put it back into FCP (new project and everything) it will just keep playing the video faster than the audio...

    Ok so after converting it in the quicktime player to a NTSC/DV DVCPRO video at 29,97 fps I open it in fcp and it tries to stretch it and to be like a 720p video file. I am really getting annoyed with this crazy stuff. I will export a little segment and you can play with it. See if you can make heads or tails.
    Thanks.

  • Some video clips looks faster than other clips. [Finalcutpro X]

    After exporting and uploading a video, sometimes I find some videoclips I added looks faster than other video clips. Is there anyone who experienced same problem? I don't know how to fix this situation.

    Ah... the clip's rate I added in the middle was 24f but the project frame rate was 50f.
    I think that's why this happened. Thanks for your reply.
    And how can I solve this situation?

Maybe you are looking for