Sound levels not the same problem
Hi there
I have added music with the Sound Enhancer set to high and some of my music has been added with the Sound Enhancer set in the middle. So what I want to know is how to make all my music the same loudness. When I ride my bike its a mission to ajust the volume every other song.
Many thanks
Slippy
There two places that need changing for this.
1. Your ipod - scroll through the settings and there should be one for 'sound check' which is defaulted to off, by turning this on it will replay everything at one volume.
2. In itunes - edit/preferences on the play back tab again click sound check and this will ensure your PC plays at volume too.
Similar Messages
-
Problem with microphone, Audigy 2, and a Dell (not the same problem as the 8 million other topi
Hello,?I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones). So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before).
So I reformatted again and am trying to figure out what order I installed and uninstalled etc.
So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's? What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/HalberdBlue wrote:
Hello,I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones).So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before). So I reformatted again and am trying to figure out what order I installed and uninstalled etc.So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/
Actually, it's not a problem but a setting. On surround mixer .rec source setting --> when you set it to What U Hear everything you hear becomes recorded --> for microphone recording set it to microphone (also set "monitoring while recording" on/off).
jutapa -
Message and no sounds - anyone with the same problem?
Hi,
since a few days I have always the same message (usually after I switched on the iPhone or after the iPhone was in the docking station and I took it out of the docking station):
"This accessory is not made to work with iPhone. Would you like to turn into airplane modus to reduce audio interference? You would not be able to make or receive calls."
After I pushed the button "NO" all the sounds are gone and I'm not able to hear iPod or YouTube without headphones. And people can't hear me very good, when I'm talking to them.
During the day the iPhone suddenly turns on, then I will get the above-mentioned message, I have to choose between yes or no and then the iPhone turns off.
I don't know what to do and why I have this message since a few days. I did a reset with iTunes several times now, but I have still the same problem.
Thanks for your help!
KatrinSounds like either the 30pin connector at bottom (where you plug in) is either failing (has an issue of sorts) or could just be dirty. Clean it up a bit (remove any lint) and see if it continues. If still an issue, make Appt at AppleStore or call 1-800-MY-IPHONE to have it fixed.
-
Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
Here is my machine info.
iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
Safari Version 5.1.7
I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
Any help or advice is apprecaited.BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
The time it happened was sometime between 14:30 and 14:35
I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero -
Sound bitrate not the same. Audio sync problem. Clip not segmenting.
Hi. I used FCP to edit various wedding videos. I have never had problems edditing my own videos in NTSC dv or hd. Somone asked me to edit their tapes wich have been recorded in PAL ( european) format. I don't know what amera or format they used but when i try to import them i keep getting the sound out of sync error. I checked and it seems that the sound is ok but would like to get rid of this error just to be sure. I am importing as dv-pal in fcp. any ideas as to how to find out the bitrate or sound type or how to get rid of this error? like i said in NTSC i don't have issues. Also in NTSC when i import a clip it segmets it to 1 clip per shot and for PAL it does not do that . It makes the whole tape one clip. Any sugestions? Thank you.
To check the audio sample rate easily in the browser just scroll the blue bar at the bottom of the browser. If you haven't rearranged the columns it should be around the middle somewhere.
Curious, is your audio out of sync in the viewer as well as the timeline/canvas? If it is in sync in the vieweruse Shanes multi-clip sequence trick to create a sequence with the correct settings. Control click on one of the clips, choose make multiclip sequence, then delete the extra muticlip sequence folder from the browser. As long as all of the imported clips have the same settings they will all fit nicely into this new sequence.
But... if the clips are out of sync in the viewer then you have a problem with the way they were captured.
You used the word import. Just to clarify, are you importing clips from a disk or hard drive that SOMEONE ELSE previoulsy captured? Or are you using the term import to describe capturing the footage into your computer from the source tapes yourself. Import and capture are two totally different things.
If you are importing data that someone else already captured and the audio is out of sync then you need to either recapture the tapes or get him to recapture them because they were no doubt captured with the wrong settings. If you are importing yourself, find out what camera they were shot with and get the settings. -
IPhone 3G not detected by iTunes. Not the same problem like everyone has!
I have iPhone 3G. It shows on screen, connect iTunes all the times. I read all the solutions on internet. I tried everything to fix the problem even Restore Mode or DFU Mode, but iPhone never detected by iTunes or computer. I tired both Mac or Windows Computers, but still nothing. Any ideas??? This forum is my last chance. I gonna break this phone if still nothing and buy a different brand. I don't wanna pay $268.00 to Apple, change with the refurbished one. I paid much enough to buy this one. Thanks for all help.
The iPhone can only sync on one computer. Is this a new phone or an old phone? If it's a phone you already had, did you change computers? If the phone you had was already synced on another computer then it may have to be deauthorized on that other computer, but I'm not sure. I had an older original iPhone that we replaced and then I wanted to use it as a iPod. I forgot that I had synced it with an older computer. When I connected it to mine my iTunes would recognize it, but wouldn't let me sync to it because it was synced to another computer. So I had to connect it to the older computer, deauthorize it and then it synced fine on my new computer. Not sure if that is a similar issue to yours or not. You need to give us more information. Like were you able to sync it before and this is something new etc. More info that you give the easier it will be for someone to answer you.
-
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
Iphone 4 microphone not picking up sound properly. Is there a solution to this? Or anyone else having the same problem that have solved it.
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation. -
When i listened my music on my ipod nano 4th, It's sound like a used LP with the distortion. I check my earphone and it's not the problem. I reset my ipod and it's still having the same problem. Does anybobody having a solution ?
From my limited knowledge the iPod Nano has no support for iCloud or wireless transfers- therefore the only means of downloading songs is by hooking it up to the computer by the white cable.
-
I have downloaded 2 rented movies. I can find then in my downloads but can not find then in iTunes. I read the others that have had the same problem an I can't find the rented in iTunes
Hey rangermikegsm,
Welcome to Apple Support Communities.
It sounds like you’re concerned because you don’t see your rentals in iTunes, but they appear to have downloaded. Take a look at the article below and check the Rentals tab in iTunes on your MacBook.
About renting movies from the iTunes Store - Apple Support
Find movies you rented previously
Find your movie on the device you used to rent it.
On a Mac or PC: Go to the Rentals tab in the Movies section of the iTunes Library.
On an iOS device: Go to the Rental tab of the Videos app.
Using Apple TV (2nd or 3rd generation): Look in the top shelf of the main menu.
Ciao,
-Jason -
i have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music song , game sound.
i have tried to clean the audio jack too but result is the same. Can any body help me please.No external sound or not sound at all - external or when using the earbuds?
Standard troubleshooting steps in order are; power the iPhone off and on, Reset by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, Restore.
i had it once before, restored the iPhone and it was solved, but i don't want to restore my iPhone every day.
Does this happen every day? If not, when was the last time this happened?
If you have sound when using the earbuds, another thing to try is insert the earbuds and start playing a song - making sure the sound can be heard with the earbuds. Without pausing the song, remove the earbuds.
If no sound is available with the speaker and a the troubleshooting steps do not resolve it or one of the steps does resolve it but the same occurs again, time to give AppleCare a call (800) 694-7466 or make an appointment at an Apple Store if there is one nearby. -
changed apple id now i can not get in to icloud can not delet it with with out old password. i read several posting on the same problem but no fix i guess apple cant fix it.
Hello catfish17,
Thank you for the question. It sounds like you changed your Apple ID and are trying to log into iCloud with your new Apple ID.
It sounds like you are trying to follow these steps to change your logged in Apple ID, but you do not have the password for the old Apple ID:
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
I recommend following the steps in the article below to reset your Apple ID password for your previous Apple ID:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Crackling audio (not sure if this is the "same" problem)
I have been experiencing crackling audio under certain circumstances with my Soundblaster X-Fi XtremeMusic. I am no audio expert, but it seems to me that the problem occurs when multiple?"types" of audio are played at the same time. For example, in a game, when voices are played over pre-existing background music, the audio on the voices will get crackly and staticky. This is recreatable in GTA4; that game uses a third-party interface (Microsoft Li've) to track game progress and post updates inside of the game. The game's internal audio is fine, but any sounds "inserted" into the game by Microsoft Li've will be all crackly because they seem to be "competing" with the existing sound effects from the game. It gets really annoying at times.
The "trigger" for this issue?was when I upgraded to a newer NVidia driver for my 7950GX2 graphics card. My sound was fine for years until I updated the driver to 72.xx and newer. However, I am not just talking about the newest driver. This has been happening since June and continues to happen with every NVidia release since then. This happens with every driver beyond 72.xx and now I am using 80.xx. Reverting drivers back to pre June 2008 is most definitely not an option, because I play current games and I update NVidia drivers on a weekly basis as new ones are released.
When the new X-Fi driver came out, I thought finally this problem would be resolved. However, the new driver did nothing to resolve the problem at all. I have tried all versions of the X-Fi driver from 2004 to the present. Nothing fixes the problem.
Suggestions are welcome... :smileyindifferent:FRe: Crackling audio (not sure if this is the "same" problem)? Hi, I used to post in these forums a couple of years ago, after an Audigy 4 literally corrupted my hard disk and nearly killed my motherboard's SATA controller.
Anyway, after a lot of debate etc. it turned out that post-Audigy Sound Blasters, including X-Fis, are extremely sensiti've to PCI timing issues and have horrible bus mastering themselves, something which was NEVER quite fixed and keeps popping up time and again. In the best of cases you will get static, in the worse cases you will get BSODs, corrupted data, or even actual damage to the hardware. Not much you can do, really, than putting up with it, like many other users before you did.
P.S.: I'm sure that shortly after this post, a certain user will chime in and start raving about how most chipsets and RAM modules are garbage, and how he uses a super-duper "golden pick" reliable system with a chipset that does everything "nice and slow" and super-reliably and ofc works wonders with ANY "problematic" CL card to date,? and how it's not really CL's fault but that of the garbage mobos, chipsets, ram etc. -
I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked
Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
I just update to iOS 7 on my iPhone 4s. The calendars on my iPhone are not keeping the information on the days that should be marked. The info is there in my iCloud on my computer, just not on my phone. Has anyone else had the same problem and what can I do about it? Is it at bug in the iOS 7 update?
What do you mean by "on the days that should be marked"? Are you calendar events displayed on the wrong days?
Maybe you are looking for
-
Third party with sto from supplying plant
Hi, When i am trying to convert Third party purchase requisition NB created through Sales order to Stock transport order to transfer the material from other plant i am getting following error Error Message Third-party not defined in the case of vendo
-
Hey gurus sorted ITAB according to D and E A B C D E 1 10 A 123 10 1 20 A 123 20 1 30 A 456 10 1 40 A 456 20 LOOP AT ITAB AT NEW D. ......processing ENDAT. FILL XYZ table. AT EN
-
SQL in statement very slow any help please
Hi guys forgive me if i dont give enough information we dont normally have many problems with slow queries as our data does not usually get to a level that is effected by speed. I have a query that does a search of a view with approx 30k records. I t
-
[SOLVED] Apache Error code: ssl_error_rx_record_too_long
Hello, I have been fighting with this error for the past week, with lots of googling, but no dice. I get the above error when trying to access a web page through apache using ssl. Any pointers? I am assuming this is a configuration problem... Thanks!
-
HT201272 I'm unable to download my previous purchases.
Hi All, I noticed i have some missing songs in my iTunes library on my PC after updating the other night, so after uninstalling the older version of iTunes 10.5.3.3 (I had been overseas for a few months and wasn't around to update) and then reinstall