Sound looping using Swiffy export to HTML5

I am facing a problem when I export my flash using Google SWIFFY to HTML5!
It wont play my sound track layer as loop anymore. only play it once when luanching the page in HTML5 and then it stops!
I changed the settings in my Flash sound properties from Start to Event , from Repeat to Loop etc. but still not a change in exported result, can you advise me how can I get this soundtrack works as loop when I export it using Swiffy? Thanks a lot.
Ali

Just in case anyone else comes looking into this issue....
I quote the warning message after exporting a flash file:
Swiffy Flash Extension for Win v1.1.1 [Swiffy v5.2.0]
- Warnings -
Streaming audio is not supported.
The only solution I've found is to copy and paste the (event) sound keyframe as many times as needed along the timeline, and set repeat/loop to 1. On-the-beat replay not guaranteed.
The swiffy documentation:
https://www.google.com/doubleclick/studio/swiffy/gettingstarted.html
...says sound is "partially supported", and then only by Chrome, Safari, IE9 and Opera (no sound at all in FF).
So far, testing, IE9 doesn't play loops, but maybe Chrome will (later, at home).

Similar Messages

How do I create a sound loop with Garageband?

Probably a simple question, but I'm very new to Garageband. I'm trying to make some sound loops to use as looping background music for a Flash website. How do I import an mp3 from my iTunes and the cut it down to a 10 second or so snippet, then have it loop for the background music? I'm guessing I want to export it as an mp3, correct?
Any help is greatly appreciated!

Hi
An Audio region is the name of a rectangle in GB that represents the audio file.
It's like a Bar that contains the data. The data can be audio or MIDI. So, drag the top right means place the mouse cursor over the top right corner of the bar and click-hold and drag... like you would drag a window or a picture to resize it in other applications.
At the end of the Time Ruler is an arrow pointing left you can drag. This sets the end of the project. So drag it to where you want it to end (exactly where the region ends)
or click on the two arrows looping (in a circle) button in he Transport bar at the bottom. This creates a cycle region (yellow bar in the Time Ruler). Drag and resize this to include only what you want:
and choose Share > Export Song to Disk.
There is a good offer on you might be interested to learn more about the basics and some of GB and other applications:
https://www.macprovideo.com/trial/?st=7df&login
This gives you FREE online access for 7 days to all the tutorials at macprovideo. I think you need to register and cancel before the 7 days is up if you don't want to continue the subscription. The tutorials for GB and other programs are very high quality so I didn't take the online sub offer but I buy and download the ones I want.
JG
Message was edited by: JG99

Freeze on blank screen with sound loop when playing steam games

Hi,
I would really appreciate some advice. I've been troubleshooting this problem without success,
Problem:
Playing games on steam*, at some point, sometimes 5 minutes in, sometimes 2 hours in:
- Screen goes blank,
- last sound loops continuously,
- computer completely unresponsive, requires hard shut down
- On restart I get almost the same report every time, though sometimes it referes to CPU 0 and sometimes CPU 2, a sample:
Sat Feb 26 12:16:44 2011
panic(cpu 2 caller 0x9cdbfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xc0000000 0x7f4cd000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x5bdd3888 : 0x21b50c (0x5d4438 0x5bdd38bc 0x223974 0x0)
0x5bdd38d8 : 0x9cdbfa (0xbe32bc 0xc53940 0xbf2424 0x0)
0x5bdd3978 : 0xae8640 (0x93d7004 0x9a47004 0x100 0x2b0a6c)
0x5bdd39c8 : 0xadf639 (0x9a47004 0x100 0x5bdd39f8 0x9bd6d7)
0x5bdd39f8 : 0x16bd9ce (0x9a47004 0x100 0x438004ee 0x2b0a6c)
0x5bdd3b38 : 0xb072bd (0x9a47004 0x877d004 0x0 0x0)
0x5bdd3b78 : 0x9d6e63 (0x9a47004 0x877d004 0x0 0x0)
0x5bdd3c18 : 0x9d346f (0x0 0x9 0x0 0x0)
0x5bdd3dc8 : 0x9d533e (0x0 0x600d600d 0x702a 0x5bdd3df8)
0x5bdd3e98 : 0x969582 (0xc1d00010 0xaa910001 0x20802040 0x5bdd3ee0)
0x5bdd3ef8 : 0xd294eb (0x940e800 0x5bdd3f4c 0x0 0x7)
0x5bdd3f58 : 0xd29696 (0x93c7000 0xd30b54 0x5bdd3f78 0x2a358d)
0x5bdd3f78 : 0x22fd09 (0x93c7000 0x0 0x5bdd3fc8 0x227966)
0x5bdd3fc8 : 0x2a06cc (0x863ea0 0x0 0x10 0x0)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AGPM(100.12.19)@0xd26000->0xd30fff
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
com.apple.nvidia.nv50hal(6.2.6)@0x1587000->0x199bfff
dependency: com.apple.NVDAResman(6.2.6)@0x967000
com.apple.NVDAResman(6.2.6)@0x967000->0xc54fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
BSD process name corresponding to current thread: kernel_task
* This also happened one time when using photoshop
What I have tried:
- updating steam and OS X
- closing all apps besides steam
- disabling Vsync in the games
- running games in very low quality
- updating to latest flash beta (steam uses flash for in-app advertising)
- reinstall steam and redownload and reinstall games
- verify and repair disk within OS
- SMART check, RAM test, Video memory test with TechTool Pro, all Pass
- removing peripherals ie. Microsoft bluetooth mouse
- hardware test with OS X install DVD on reboot, detects no problems
- stressing the GPU doing intensive 3D effects in Adobe After Effects, no crash
- stressing GPU using CINEBENCH, no crash
- monitoring temp with Temperature Monitor, Last crash GPU was at around 80 and CPU at around 85
System
mid 2010 MBP
15 inch with Hires display
i7, 4 GB RAM, Nvidia GT330M card
OS X 10.6.6
*Other points*
- Machine is still under 1 yr warranty
- I'm overseas studying design and I really cant afford to to take it in and not have a machine for 2 weeks. I'd really like to exhaust all options before taking it in. I'm also worrying that they will run the hardware test as I did and tell me: no problems found.

I'm so ****** off that it's been weeks and no solution has been provided for this. In the middle of video editing, watching quicktime videos, youtube, or playing any games the computer hard freezes with a black screen and looping audio of about 1/2 second.
FIX IT!

Export in html5 with the right language?

Hello everybody,
I work with office 2010 and adobe presenter 10. When i export my slides in swf, I have the correct language (french), in "Both" option too. But when i tried to export in HTML5 only I loose the french language.
Could you help me please?
Thanks a lot.

To add to Mayank's response, Presenter will publish with all language's labels but only displays the language that matches your OS's language. So if you are working on a French presentation on a computer where the OS is in English, the English labels will display when you watch the published presentation. You can try viewing it on a computer where the OS is set to french, or, you can make all the English labels in French. Be careful with the second option, as there is no 'restore to default' for the text labels, so you'd need to change them all back to English if you didn't want them to stay in French for English OS's for future presentations. The easiest trick for this is to create a copy of the language.xml file and have one that has the original text and one that has your modified text. Whichever one is named language.xml in the folder located at C:\Users\{User}\AppData\Local\Adobe\Adobe Presenter\Themes will be the one that Presenter uses on the published presentation. You can either swap them back and forth or leave them both there, but change the name of the one you don't want to use for that presentation.

Export to PDF - Can a single report (rpt file) create multiple PDF files using the export command?

Post Author: markeyjd2
CA Forum: Exporting
Greetings forum members,
My question is, in its entirety: Can a single report (rpt file) create multiple PDF files using the export command, ideally one PDF file per DB record?
In my case; I have a Crystal Report that reads data from a DB table containing ~ 500 records. When I export the report to a PDF file, I get one PDF file, with ~ 500 pages.
What I would like to do is export the report to ~ 500 individual PDF files; One file per DB record. The file names would be based on the table's primary key.
Is this possible?

Post Author: Micha
CA Forum: Exporting
Hi,
you need some lines of code, but its easy. Dependend on how to start the generation of your 500 PDFs, you can write an ASP page and start it via Web Browser, or a Windows Script and start it via scheduled job...
Here's an abstract of the ASP code I use:
First, you create a recordset (here: "rsc") which gives you the list of ID fields you want to export, then you create CrystalRuntime.Application object, then you loop through the recordset, open your report (here: "oRpt") and set login info. Then set the selectionformula, so that the report displays only the data of the current ID, e.g.:
oRpt.RecordSelectionFormula = "(" & oRpt.RecordSelectionFormula & ") AND {myTab.myVal}=" & rsc("myVal")
Then you export the report, move to the next record in recordset, and repeat the loop until recordset.EOF. Then you close recordset and connection.
Micha

How do I add variables to different checkboxes without using the 'Export Value' and then add them together (if checked)?

Hello,
I am very new to JavaScript. I would like to create a checkbox with a numerical value variable activated if the box is checked. Unfortunately, I cannot use the 'Export Value' because I already need to use it for something else.
Any help is really appreciated.
Thanks,
Robyn

Brace yourself, here's your solution.
First of all, the export value of you checkboxes should definitly be the number of hours for the class since you will just add them up further.
Second, we will use the userName property for our second export value (its the field right under Name and its labeled "tooltip"). You will name the class there.
Finally, you need to name each checkbox with a number at the end starting with 1 all the way to 190. This will be used in loops. ("whatever.1", "whatever.2,....."whatever.190")
In the calculate event of "total hours":
var sum = 0; //declaring a variable that will be used in the loop
for (var i = 1; i <= 190; i++){    //this loop will scan through all your checkboxes
     if (this.getField("whatever."+i).isBoxChecked(0) == true){ //if box is checked....
          sum += Number(this.getField("whatever."+i).value);   //.....add its value to the sum
event.value = sum; //display the total
Now for the course name field, we will use the same pattern in the calculate event
var courseList = new Array(); //declaring an empty array that will contain the courses
for (var i = 1; i <= 190; i++){    //this loop will scan through all your checkboxes
     if (this.getField("whatever."+i).isBoxChecked(0) == true){ //if box is checked....
          courseList.push(this.getField("whatever."+i).userName);   //.....add its userName (tooltip) to the array
event.value = "You are attending these courses: "+courseList.join(", ")+"."; //display the array by turning it into a string and joining its items with ", "
You can try it out with just a few checkboxes at first. Don't forget that the loop mustn't go further than the existing field or you will get an error and the script will stop. Make sure no error show in the console (ctrl+J).

Cant export to HTML5... Flash doesnt give me the option!

Hello, i am trying to export or create an HTML5 project but i cant. I have Flash cc and i dont see anywhere the option to export to html5, neither i see on the welcome screen the option to create an HTML 5 project
Can someone please help?
Thanks!

Check, if you local installation has the following files (This is under Win7 64.bit):
in your ...Adobe Flash CC/Common/Configuration/Document Types - folder there should be
1.A folder named Canvas
2.A folder named JSFL
3. A file called "Master.xml"
[also in the localized folder of the program (e.g. Adobe Flash CC\en_US\Configuration\Templates)
there should be a folder HTML5 Canvas with 3 fla examples that are already in the new Canvas format.
You could always open one of these delete the contents an use it in the future as your own Canvas-Template)]
PS: If i remember correctly the HTML5 support was patched in later, so before doing anything check if you have the latest version (for me its 13.1.0226)
If your Flash is not up to date, but keeps insisting that there are no updates available, this could be due to network/firewall problems, a corrupt installation etc.

Sound Loop with a button

So I used the tutorial on this page to make a button that
turns sound on and off (it is the only one I could find that
actually works):
[URL="
http://www.entheosweb.com/Flash/flash_sound_button.asp"
But the only problem with it is that the sound does not loop.
I've found scripts that make sound loop, but I can't figure out
where to put it into this code.
PLEASE HELP ME! This was supposed to be done last week, and I
don't like telling the customer that I don't know how to make his
sound loop!
Please tell me how to fit it into this code because I don't
want to make a whole new sound button. Thank you!

The movie that you linked to will only stop the sound that is
playing. Further that sound is set to only loop 7 times, so it will
stop after a little more than a minute in any case.
Have a look at this variation that I built using the existing
content. It's much simpler and actually does what you want:
http://www.ddg-designs.com/downloads/soundControl.zip

SB Audigy 2 sound loop crashing ga

Hi i just recently purchased SB audigy 2zs from a local best buy. AFter uninstalling all my old sound drivers, i popped this baby in. Installed all the drivers, including EAX 4 and all the other goodies that came with the CD. I started to load up a game, and it would play for a little while (under 5 minutes) then have a quick sound loop and boot me to the desktop. I just thought it was some flaw, then i tried to reload the game, and load it up, and same thing happens, i change the Dxdiag sound to normal acceleration and it still has the same problems.
my Computer is using
Windows Xp professional
Service pack 2
Im on a Pentium 4 3.0ghz Northwood 800mhz FSB HT TechnologyIntel 865 PERL(K) motherboard2 52 meg Corsair XMS ddr400 pc3200 ram (platinum heat spreaders)60 Gig 7200 rpm SATA Seagate250 Gig 7200 rpm Maxxtor20 Gig 7200 rpm WD SE28mg ATI RAEDON 9800 PROSoudblaster audigy 2zs 48x2x48 Liteon cdrw6x Pioneer dvdKlipsch 5. promedia250meg external Zip7" Samsung LCD 72xLogitech Mx500 mouseSteelpad 4s MousepadLogitech Elite Keyboard BlackPlantronics Audio 90
I just checked the sound tab on dxdiag and it said this.
The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Is there any way to make it digitally signed?

If you appied the driver updates (or if you didn't, you should! They fix stuff.), sometimes the installer installs the driver files but they don't get registered properly. You can check if this happend by going into Device Manager and clicking the properties/driver tab and seeing what it is labeled. You might have a label of the 402's that used to be signed before you ran the driver update installer but now are no longer! and, if you look at the list of files below that you may find all 444 drivers, most of which do not have the signed icon to their left.
If this happened to you, simply use WinZip or WinRar to extract the downloaded driver update to a folder and locate the CTZAPP.EXE file in the driver folder. Run it, and place a check in the box the tells it to overwrite previously installed driver files and shared files. Say yes when you run it and it asks you if you really want to do that. Reboot when done. When you go back to check, your drivers will be all signed and the 444 (and signed) label will be there.
Unfortunatly, this stuff happens even if you correctly disable the virus scanner before performing the operations. But, worse happens if you leave stuff running, so yeah, make sure you close your programs in the taskbar and the virus scanners before installing software.Message Edited by Eck on -8-2004 06:0 AM

Is thier a command for looping. somthing like sym.loop("") or EC.Sound.loop(""). I mainly need this

is thier a command for looping. somthing like sym.loop("") or EC.Sound.loop(""). I mainly need this for two work for looping a sound file.
Thanks.

Hey, sabermaster-
Not at the moment, though you can create your own loop effects by using triggers on the timeline. What specific functionality are you looking for?
-Elaine

Black screen then sound loops on cq5320y

System specs.
Athlon 2 x4 640
4 gig memory
HP motherboard cq5320y
Corsair 500 w power supply
500 gig HD
HD 6670 video card
The issue I am having is upon playing world of tanks anywhere from 5 minutes to 2 hours I will get a black screen and the sound will loop. The monitor will says it is going to sleep. The only fix is a power off/on. This sometimes gets courpt files then have to run chdsk. So it does have most recent drivers and I have tried so old ones with the same effect. Today daughter was playing an online(facebook) game and same thing happen. So I put back in my first video card hd 4550 that used to not have this issue. Then started playing WOT and again got black screen and sound loop. So I am not thinking it is an video card issue since it happens with both video cards. Power supply voltage checked out okay by meter. So not sure where to go with this issue.
Only thing I am think is the ps is over power the video card through the old motherboard????
Any other ideas

sirdano wrote:
System specs.
Athlon 2 x4 640
4 gig memory
HP motherboard cq5320y
Corsair 500 w power supply
500 gig HD
HD 6670 video card
The issue I am having is upon playing world of tanks anywhere from 5 minutes to 2 hours I will get a black screen and the sound will loop. The monitor will says it is going to sleep. The only fix is a power off/on. This sometimes gets courpt files then have to run chdsk. So it does have most recent drivers and I have tried so old ones with the same effect. Today daughter was playing an online(facebook) game and same thing happen. So I put back in my first video card hd 4550 that used to not have this issue. Then started playing WOT and again got black screen and sound loop. So I am not thinking it is an video card issue since it happens with both video cards. Power supply voltage checked out okay by meter. So not sure where to go with this issue.
Only thing I am think is the ps is over power the video card through the old motherboard????
That is not very likely. The power to the video card is regulated by power circuits on the motherboard.
Any other ideas
Which OS is installed and which type is it?
When was the last time you went to the command line and used the system file checker? sfc /scannow
Have you refreshed the swap file recently?
How about your temp\tmp folder?
What are you using for an active antivirus\malware solution?
Which JRE are you using? Are you sure it is the most stable version?
Are you certain this is not a temperature related issue?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Lock ups and sound looping!

I remember reading something here about people having trouble with their systems locking up and then getting a loud static noise then a sound loop when playing games.
I am getting this about 2-3 times a night now and it is driving me nuts, I do not have temp problems of any sort and I have all of the latest drivers for everything on my system.
Any ideas?
Specs in sig

Set your PCI/AGP Freq to 66.66/33.33MHz.
Increase your DDR Voltage to 2.7~2.8v.
Check if you have any background programs causing all high CPU load times while gaming.

Sound "Looping" on 46G300U1

Hi.
I have a 46G300U1 which is connected to an AT&T U-Verse DVR via HDMI. Periodically the sound "loops" or hangs in an infinite loop. this problem is very intermittent and might not happen for days or might happen 5 times in an hour. Only turning the television off eliminates the problem. If I try to change inputs to clear the problem the TV reboots (Toshiba light and power light go off and then come back on).
I've tried 5 different HDMI cables (high speed and 1.3) with no change in results. I've tried a component cable and that resulted in a different issue - periodically the volume goes to maximum.
Does anyone have an idea what's causing this and how to fix it?
Thank you!
Kevin

Does it only happen from that source? Has it ever happened from a different source?
Try disabling REGZA. From the "Setup" menu, select "REGZA-LINK Setup." Change "Enable REGZA-LINK" to "Off."
- Peter

Sound Looping station

Hi Guys,
I relatively new to LabVIEW, but am loving it so far.
I want to create a sound looping program... the difference from others being that the sound is recorded (eg. 4 seconds of recording) then the Sound Output doesnt play for a while (eg. delays the output by 8 seconds - variable by input).
Is there a type of buffer i can store the sound input to...? Or do i have to write to a file, and the open it to be played.
I would not like to do the latter because i need the playback exactly on the time specified (for live music applications).
Thanks!
Dan

I'm sorry for the duplicate posts. I wanted to add the image of the block diagram, but it took me a while to figure out how to do that. The link where I learned it is here:
http://forums.ni.com/ni/board/message?board.id=130&message.id=1655&query.id=122224#M1655
Also, the link to get the block diagram was here:
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=1020&view=by_date_ascending&pag...
Here is the image:
It is a cool feature that really makes reading the threads easier when people can post small snippets of code. But there really must be an easier way to do this!
Message Edited by Ravens Fan on 02-02-2007 12:07 AM
Attachments:
Example_BD.png ‏4 KB

No Sound when Using HDMI from ATT DVR to TV

I have a 52xv645u TV. When I connect it to my ATT UVerse DVR using HDMI I get picture but no sound. Using Composite everything works fine. I've tried several HDMI cables. If I use HDMI to my Surround Sound amp, I get both picture and sound (even with the amp volume muted). The problem seems to be the connection between the DVR and the TV. Does this TV support HDSC? I believe that the DVR requires it to support it on the TV.
I see that there is an upgrade for the firmware for this TV. I have a Mac so the instructions don't work right. I've downloaded the files to a flash drive but I am not sure if they are correct because there is no list of files available. Does anyone know what files are needed so I can be sure that my flash drive has everything it needs?
Any help with these problems would be appreciated!
Thanks,
Mark

Is there a list of things that are fixed in the update? I can get sound and picture through component but I fear that it's not the same quality as it would be through HDMI. But again, it's only when I watch TV without going through my surround sound amp. I can watch TV through my apm and watch my Bluray DVDs through the amp and it goes via HDMI.

Sound looping using Swiffy export to HTML5

Similar Messages

Maybe you are looking for