"Source is not Active" when creating DTP from  Datasource (BI. 7.0)

Hello,
  I need to load data to ODS from a ZTable. Version 7.0
This is what i have done so far:
  - Created a ZTABLE. (OK)
  - Loaded data via function modules through excel macros.  (OK)
  - Created DataSource(ZGDRDS01)  from a ZTABLE in RSO2. (I guess OK)
  - Create DataTransfer Process - (NOK)
       Source of DTP
         Object Type : DataSource
         DataSource : ZGDRDS01
         Source System: BWD
    - Error Message: Source ZGDRDS01 of BWD(type DTASRC) is not active (like if it didnt exists)
(I didnt find any Activate button in RSO2)
Somebody else did something similar before and created its own DataSource, that one I can use, but i need to create my own.

Thank you for your fasts answers! That seemed to be part of the problem.
Did you create Transformation which is a prereq for creating a DTP ?
- No i didnt create the transformation first, but the problem was the same.  When I created a Transformation it asks me for the DataSource and back again to "source is not Active".
New problem:
I went to SourceSystem and replicated the datasources,
- Know it appears just below the other one that was previously working.
- However it appears with status Inactive and there is no Activate Button.
- Something went wrong with the version because the column "M = A Version" appears  =/=, for my new Datasource. I right click on it -> Replicate Metadata but didnt help.  Any other option marks me something lik is not Active or
   "The DataSource  ZGDRDS01 (BWD) does not exists in object version A"
if i right  clic -> Display
Version = Modified (yellow)
I deleted the datasource and generated it again with the same result.
¿do you know how to fix this?
P.S ¿Should I post a new thread for this problem?

Similar Messages

  • TOC not updating when creating PDF from Robo9

    I have not really created PDFs from Robo before, so I might be missing something basic. I am trying to create Word and PDF documents from my Robo9 project. My problem is that some of my topics are not being generated, in either the Word output or the PDF output. The topics are indeed part of the TOC in the Robo project, but they are not part of the TOC in the Word and PDF output. The strange thing is, all of the TOC books make the conversion, but the one book I am having the issue with includes one topic, but all of the other topics in that book do not get converted. I tried recreating the TOC, and it still does the same thing. It's almost like the printed documentation generation is ignoring any new changes to the TOC, as it's the same every time no matter what I change. I tried making some changes to topics that are generated, and I can indeed see the changes in the printed output docs.
    Anything glaring I am missing, or should try? Thanks.
    Mark

    Likely a common misunderstanding.
    The first time you create printed documentation, the topics are based on the TOC. Thereafter there is no link.
    When you add new topics to the project, they are not automatically in any of the TOCs. You have to add them to each TOC. It's the same with print, you have to add them in the print layout.
    Easiest way is to simply use the double left chevrons to remove the topics in the print layout and then use the double right chevron to back in, the difference being it will add all the topics in the TOC and as you added the new topics there, they will be in the print layout.
    There's more in Printed Documentation on my site.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Error while creating DTP from DS to Infoobject

    Dear All,
    I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
    Issue:Enter a valid value
    Msg No:00002
    Procedure: Display the allowed values withF4 and correct your entry,
    Regards,
    Satya

    Hi Satya,
    Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
    I don't find any specific problem or any patch problem with the error you are getting.
    Hope it helps !
    Regards,
    Rose.

  • Why do I  get message on my Nook "user not activated" when I try to read a borrowed book from the library.

    I get message on my Nook "user not activated" when I try to read a borrowed book from the library. Book is there and I can read on my computer but not the Nook. Can read purchased books on Nook.

    Please add me to that exact problem on my Nook - Tim

  • Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

    Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11.  I can see the tables and views in the database tab, but no stored procedures.  If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

    Ben thanks for the reply!
    Yes that is the process I am following:
    In Dreamweaver, open the page that will run the stored procedure.
    In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
    In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
    Enter the ColdFusion Data Source user name and password.
    At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
    Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated.  I need to make sure it is pulling from the correct server but right now it appears to be working.
    Thanks
    Dwight

  • Partner function not working when creating PO with ref to PReq

    Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
    But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
    however it works when i create the PO directly ( without the PR ref )
    I am using the same material & Plant for both manual PO & PR to PO.
    Any idea what could be wrong .
    I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
    Thanks
    Dkmurthy

    Hi,
    I have also an issue that seems similar to one you are discussing.
    When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
    When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N
    Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
    Any input is wellcome.

  • ALE Change Pointers in source system not active

    Hi All,
    I am trying to load 0COSTELMNT using deltas. The initial load is OK and then i use a delta and it fails and i get the error:
    "ALE Change Pointers in source system not active"
    I have carried out the following steps in an attempt to resolve the problem - but it didnt. Anyone have any advice??
    (1) Checked BD61 – to confirm whether the change pointers are active
    (2) Checked BDCP to confirm the number range is maintained
    (3) Checked SALE (Activate change pointers for message types)  to confirm whether the change pointer has been activated for the type we need:
    COCOKA     Control segment CO object/cost element
    COELEM     Cost element master data
    (4) In transaction snum, Selected number ranges and confirmed the intervals are setup
    No. 01
    FROM: 0000000001
    TO: 0000009999
    (5) Activate transfer structure
    (6) Replicate Datasources
    Thanks,

    If you are transferring master data from source system, the BD61 setting on the source system should be checked.
    Why it has been unchecked - not sure (likely someone did it by mistake).
    It shouldn't have any effect on txnl delta. What will be effected though is that you will have lost delta of the ALE based data sources for the period this setting was unchecked.

  • Source system not Active error while installing BI content cube

    Hi.,
      When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues.  In source system assignment of BI content the source client is also checked. Please give me a solution.

    Hi Selva,
    If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
    Regards,
    Kams

  • Users are not able to create POs from PRs having Production Order (F)

    Hi Gurus
    Users are not able to create POs from PRs having Production Order (F) as creation indicator.
    Whenever we are trying to convert the PR to PO we are getting the error message "Requisition has different doc. type NB and item cat. >&<" based on the below OSS# 938154 condition for the creation indicator type F.
    Would you please investigate and advise what OSS notes are required to be able to use item category L (subcontracting) on a PO for a requisition generated from a network activity via Procurement Type = "Preliminary requisition for WBS element".
    Thanks,
    Sada.

    Hi Ajay & Andra
    Whenever we are trying to convert the PR to PO we are getting the error message "Requisition has different doc. type NB and item cat. >&<" based on the below OSS# 938154 condition for the creation indicator type  Production order (F).
    Our Business requirement as shown below.
    1).The problem - we currently have no way to "direct requisition" an item to be procured via      subcontracting - only itu2019s possible via MRP.
    2).These behaviors are inconsistent as the requisition process should not impact the procurement process.  Can we find a way to influence the creation indicator on the requisition so that it does not appear as a production order?
    Please suggest any alternate method for achieving this.
    Thanks & Regards
    Sada

  • Change pointers are not generated when creating a material master

    Dear Experts,  
    Change pointers are not generated when creating a material master. 
    However, when a change is made to the already created material, the change pointers are created according the fields in BD52.  
    Am I missing any settings?
    I need to create change pointers immediately when I create the material master in MM01.  
    Please suggest. 
    Regards,
    Shetty

    did you follow the steps given in
    http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

  • PSE 8 some photos will not autoimport when creating an photobook and block the whole sequence. Are there knows reasons why individual photos can hang the import? Thanks Michael

    When creating photobooks with PSE 8 I find occasionally that certain photos block the autoimport function and none of the sequence are loaded into the new photobook. Using the identical setting to create a photobook other sequences of photos work perfectly. The photos have been checked and found and all are connected and recognised. Are there knows issues with some photo formats which will not autoimport when creating a photobook?
    Thanks for the help.
    Michael

    Sometimes LR can be "nudged" into showing folder relationships which better match the file system, by using the "show parent folder" command. When existing folders appear as if they were "top level" in the drive, we can see a more or less virtual picture of the situation, rather than anything real. So newly added folders can sometimes present themselves as if independent of what is already there.
    By forcing LR to show a fuller hierarchy of folders, more attention gets paid to the actual arrangement - so new and existing folders should "wake up" and thereafter appear more reliably in the right relationships.

  • Hyperlink box is not active when attempting to link text to a webpage

    In Numbers Application, I attempted to link text in a box to a web page.
    The Inspector box for Hyperlinks was not active.
    It also was not active when I attempted the same through Insert
    Suggestions?

    You can link to pages or destinations:
    http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf

  • When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

    When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
    Any help with getting the TOC heading entries as hyperlinks?

    Try to do it from Word using the ribbon.

  • Enable Alerts not Active when using have multiple series in chart

    Alerts option is not active when, I am having Multiple series in a Chart.....
    is this common in Xclesius, is there any alternative for should alerts.
    Thanks in Advance

    Multiple series alert functionality is available in SP 4. Use Combination cart for multiple series. You will get that option for sure.
    I am using it.
    My suggestion is, you download SP4 and then continue your development.
    as you said you are using Fix Pack 3.5.
    Edited by: Debjit_Singha_86 on Aug 17, 2011 5:37 AM

  • Transferred CS4 to new MacBook Pro, now some fonts will not work when PDFing documents from InDesign CS4. Help!

    I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
    Help/input would be much appreciated. Thank you!
    Kristen.

    you should properly install adobe products, not move, migrate or otherwise transfer them.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for