Source message split into 2 orders - 2nd order populating wrong values
Hi Friends,
I have an issue related to X12 to Orders, X12 file is processed and split into 2 orders/idocs,
1 idoc is outputing the right values, however the 2nd idoc is extracting all wrong values.
According to my observation, there are no values coming in for couple of E1EDKT1 segments (for the second idoc, fyi, there are multiple E1EDKT1 segments with different values).
it seems that values coming after these segments are extracted and filled to these segments. i can see 2 upward shifts in the output.
Any idea how to resolve this issue, i have tried using map with default, split by value, collapse context, remove contexts etc.
Thanks in advance,
Regards,
Use mapwithdefault function with a blank character for all the target nodes which ever you think might not get a value from the source. You will see the right results.
VJ
Similar Messages
-
Group Messages Split Into Seperate Group Messages
Problem:
Somehow my group messages are being split into seperate group messages. What is causing this?
Examples:
Example #1: I sent a message to my Mom, Dad, & Sister, which shows in my phone as a single group message. Mom & Dad have android, Sister has Iphone. When they reply, a new group message appears, which includes all of them, and each of their replys, but not my original message. So I end up with two seperate group messages.
Example #2: My friend Alex sends out a group text to me, and eight other people and it shows as one group message in my phone (Mix of Iphones and others). My friend Drew then replys and in my phone I now see two seperate group messages, but he does not. I then reply to Drews new group message, and now he sees two group messages.
Note: In each of these examples, all the same people appear in the message, so it is still a group message, BUT when looking at the different group messages that are created, the names of the people are in a different order.
Phone:
Iphone 6 Plus, Version 8.0, Network: AT&T,
Note: It also would do this with my old Iphone 4S, unfortunately I can't remember when it started to do this, whether it was after an upgrade etc...
Message Settings:
iMessage = On,
Send Read Receipts = Off,
Send as SMS (when MMS not available) = On,
Send & Receive = 3 Addresses, My Phone & 2 x Emails
MMS Messaging = On,
Group Messaging = On,
Show Subject Field = Off
Character Count = Off
Please Help! Thanks!Same thing happens to me. So annoying. Most we can do is submit a bug at http://bugreport.apple.com so please do!
-
Editing a message, splitting into several parts, adding attachment to a part
I feel stupid.
I just started a discussion with the intention of splitting my post into several parts, but it seems that I can't do that unless I "comment" on my first post. This would be OK, except that I cannot seem to be able to insert anything to these comments but images and urls. I want to attach a zip file, but I have no button to do so. The "Add Attachment" button at the bottom of the message window is appearing only for NEW POSTS (such as this one)!
Third, I can't seem to be able to edit my post which was submitted a minute ago.
Help, Help, Help!
Thanks,
X.
Solved!
Go to Solution.X-) wrote:
- No attachment for comments
This is a very recent change and hopefully we get that functionality back.
X-) wrote:
- Ridiculously short Edit window
I would recommend composing and refining the idea/reply offline.
Personally, I think the edit time window should be extended, but I am not sure how long it should be. It probably should not be infinite to avoid race conditions. For example if there is already an extensive discussion of the current versiont and then the idea suddenly changes 180 degrees, none of the replies would make sense anymore and people even might want to revoke their kudos. Note that I often quote the existing post (as above!) to (1) make it clear what I am replying to and (2) to keep the answer clear even if you would have edited the above sentences into something completely different in the meantime.
Historically, I think the edit window was forced to be very short to allow reasonable syncing with the newsgroup mirrors (e.g. LabVIEW forum vs. comp.lang.labview), but this is no longer an issue. What would be reasonable? 1 hour? 1 day?
Should existing repliers be notified of edit changes?
For longer edit windows, we might also need an versioning control mechanism (e.g. like in wikipedia). where older version can be inspected by the public.
Minor edits can be done by the moderator at any time. This should be reserved for simple mistakes (e.g. forgetting a "not", inverting the actual meaning, or changes in the title to make it clearer.)
In general, I agree that things can be improved. We just need to find the sweet spot.
LabVIEW Champion . Do more with less code and in less time . -
Trying to insert values into a table inserts the wrong values
Hi, I'm sure this is quite simple but I don't know why it is happened (Spent about 2 hours debugging my program only to find the error is actually in the SQL insert statement not working properly hehe)
I have a simple Payment table with the following columns:
int - ID (primary key)
int - Amount
int - Paid
varchar - Notes
I try to place a new record into the table as follows:
insert into payment values (1010,50,1,'Hello')
but the ID i choose is not added to the record, rather the database assigns a ID instead automatically (it seems to add 1 to the last ID)
On further inspection this happens for another of my tables too, however for another table, this does not happen and I can assign an ID as I would like.
When creating my tables I thought I set them all up the same, however I guess not
Does anyone know the problem?
ThanksHi,
Are you are using this INSERT statement in any form??? if so, please check your pre-insert trigger.
If not, then you may verify it by inserting it through iSQLPlus. If it doesn't insert your data, then check the database triggers associated with INSERT for your table.
Regards,
Zaaf -
Full Points sure: Wrong values populating in report (BEX)
Hi Gurus,
I got an Issue on CRM Report. Report is populating wrong values.
In the report, We have structure called Opportunity (in that structure fields are New opportunity, Close opportunity, Win opportunity and Open opportunity) in query and One key figure called Revenue.
On revenue we have one condition with variables. But, in that condition everything is fine.
The Condition Screen is like this:
Radio Button: Single characteristic is selected
"Opportunity Sales ID" selected in Characteristics.
Keyfigures:
Revenue New Opp TOP N TOP X OPP
Revenue Open Opp TOP N TOP X OPP
Revenue WINS TOP N TOP X OPP
Revenue Lost TOP N TOP X OPP
everything is right in this: If we select top 10 opportunities. we are getting wrong values
for ex: if we select top 10 Opportunities (in the selection screen) means REVENUES.
We are getting 12 values. 10 values are correct remaining 2 values are wrong..
There is no Update routine for revenue keyfield.
Can please suggest me on this What are possibilities for wrong values ...
FULL POINTS SURE FOR THIS
THANKS,
KNHi All,
Can anybody answer... this...
thanks,
KR -
ORDERS Idoc splitting into two
Hi,
I have requiremnt where i need to Split Orders idoc into messages.
1. Orders XML file 2.XML file only with control record fields.
i have seen all the discssion on this and deceiced to implement the scenario as per
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible blog. But the problem is need to use two message types on the target side.. for splitting the message..
ORDERS and Contrlo record Fields message type... i can't change the standard idoc..
Can i add the Control record fields to Standard IDOC in any way.... like exporting file...if so..
tell me whether the Idoc will split into two messaged or not....
Regards,
DeepMy doubt is in the mentioned blog target msg type was created one.. here i need to take with ORDERS idoc(ED in our case). I need to split the IDOC everytime when it triggers based on RCVPRN field value.. this value is always so there should be 2 values everytime.
you will need to duplicate the IDOC at the target side to achieve this...if you are successful in doing the 0...unbounded thing for your IDOC....
1) Duplicating:
Duplicating is not Multimapping.....Multimapping is what you saw in the blog and duplicating is right-clicking on the node and choosing Duplicate Subtree....no two messages will be created in this process (duplicating).....
2) Multimapping:
it is used to create two (or more) different messages at the target end...
Does it split into two message ( ORDERS XML and Control Record XML)
No it wont split the IDOC into two messages.....
So if your requirement is to have only one target message with seperate IDOC nodes..having ORDERS and Control data individually...then go for duplication method...apply the condition for RCVPRN to generate the nodes...
If your req is to have two different messages at the target then use multimapping apply the condition for RCVPRN to generate the two different messages.....
Hope it helps...
Regards,
Abhishek. -
when downloading from my PD 150 to the event window in my iMovie the clips are out of order and split into many subclips. Very frustrating
Nevermind, somehow it's magically back in order.
-
Split source message into multiple target messages
Hi Experts,
I have a scenario where a source message needs to be split up into multiple messages for the corresponding target systems.
One source system and three target systems.
Source system is a .Net application
Target systems - SAP R/3, Two webservices on different application systems
Can i implement the scenario above using BPM in the following manner?
Source->WS Adapter->PI-->RFC Adapter->SAP R/3
Source->WS Adapter->PI-->WS Adapter->Target 2
Source->WS Adapter->PI-->WS Adapter->Target 3
I could have a webservice at the source which would be called by the .Net Application
Webservice request would be passed to an integration process which would split the message for the three target systems specified.
Correct me if am wrong.
Also please get back to me if you need more inputs
Regards,
KalyanHi,
You can implement the same with out using the BPM itself...
you can use either of the below options
1. if target messages are optional like based on certain conditions if you need to route the message to the particular targets
then you can use multimappings for the same which generates the mappings based on the condition for the particular target.
2. if each incoming message needs to be routed to the three receivers each time then configure the three receivers at the receiver determinations one for each target...
3. if you are using the same business system for all the three receivers then create the three interface mappings and configure the same at the interface determination level so that for each message three target messages will be generated and send to target...
HTH
Rajesh -
Onetime vendor - address is not copied into the purchase order ME21N
Dear all,
I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
So my question is if anybody can propose a solution for this.
Best regards, LB>
Lars Birk wrote:
> Dear all,
>
> I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
> My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
> So my question is if anybody can propose a solution for this.
>
>
> Best regards, LB
One time vendor can never hold vendor specific details i.e. vendor details and bank details. You cannot use a one time vendor for ME59, use regular vendor account instead for your requirement or enter the address manually at time of conversion as per the message.
Edited by: Afshad Irani on Jul 13, 2010 1:34 PM -
Problem in Sourcing sequence for plant in Sales Order.
Hi
I am facing problem in Sourcing sequence for plant in Sales Order.
If in Sales order i am selecting material then system is picking plant automaticly 8635 which is worng. For customer XYZ/ ship to ID ZXY, system should pick plant in sequence 5400 - 2300 - 5050.
Could you please confirm what is exactly problem and what seeting i need to check.
pls confirmBut it is defind for material master.
Because 8635 existed in materila master so system determines 8635 plant into your sales order.
You can set only one plant as automatic else you can enter manually in sales order.
If you automatic as 5400 then assign in Customer material info record or Customer or material master any where you can maintain. -
Is it possible to combine multiple IR into one Internal order?
Hi,
Is it possible to combine multiple internal requisitions into one internal order in OM? Thanks
Regards
LeoOracle Order Management provides one to one mapping between Order and (orig_sys_document_ref & Order source). You may need to go for custom solution to consolidate requisitions to create a single internal sales order.
-
Confirmation for Split operation in Production order
Hi Experts,
I have one production order say order no. is "100000000000" and its order qty is 100pcs and in operation no. "20", i have splitted the operation into two individual capacities and allocated 50pcs to each individual capacity. Now can any one explain me or tell me the steps required for confirming the operation quantity by individual capcity.
Regards,
Satya.Hi,
Thanks for your response on my post.
As you mentioned I am using T-code CO11N for Production confirmation, but in this screen if I select operation no. 20, by default, system is read work center from production order "operation overview" screen. Now I want to capture the confirmation quantity against "induvidual capacity" and want to see some reports based on "induvidual capacity" level of the same work center.
Could you pl. advise on this.
Regards,
Satya. -
Show status message when we press "to order" button in Tcode MB1A
Hi Friends,
I want to show a status message when the button "to order" is triggered in the Tcode MB1A. The status message can be shown either in the 1st screen or 2nd screen.
Thanks,
AnuHi Anuradha,
Check this BADI: MB_CHECK_LINE_BADI
Reddy -
2nd Order Differential Problems
Hey I'm creating a second order differential solver and I'm using the differential solver VI's that come with the package. However, the solver won't do 2nd Order ODE's that are critically damped. Does anyone know what this problem is and how I can remedy it? I put a copy of my program here to show you the problem. For an example of a critically damped equation, input 4 in both "dy/dt" and "y". Thanks.
Attachments:
2nd_Order_Solving2.vi 170 KBHey Jay,
The modification I made is not that complex, so I'll explain what I did step by step. Before I go through the process, I should offer a disclaimer.
When modifying ODE Linear nth Order Numeric VI, you may want to save a local copy for yourself. This will ensure that the shipping version of the VI is not altered. If you modify the shipping version, then leave it that way, you may run into errors when you try to use the VI in the future.
Also remember to verify the results of the critically damped case. Since the VI is not designed for ODE's with repeated eigenvalues, it's possible that you could be getting incorrect results after the modification. With that said, here's the procedure I used to modify the VI so that it runs even with repea
ted eigenvalues.
1. The modification I made was to the ODE Linear nth Order Numeric.vi. You can access the VI's code by simply double clicking on it from your VI.
2. The change I made is located in the red circle on the bitmap I sent you.
3. Look for the "Multiple Roots.vi", the gray one with a sigma in the upper left corner and some arrows and dots on it. The output of this VI is a boolean, and it is connected to a not gate.
4. Delete the wire from the output of the "Multiple Roots.vi" to the not gate.
5. Right click the input port of the not gate and create a constant.
6. Make sure that the boolean constant connected to the not gate is false.
This is what I did to ensure that the VI will run regardless of the eigenvalues. Please be aware of the issues I addressed above. Otherwise, good luck!
Marcus G.
National Instruments -
Simulating a 2nd-order pendulum system
I know there are lots of forum posts about 2nd-order solvers, but I can't seem to find one that I can apply to my particular problem.
I'm developing a software model of a pendulum attached to a movable (along one axis) support. My end goal is to simulate the pendulum's response - given a set of initial conditions - following an impulse to the support.
The ODE has the form: Θ"(t) + x''(t)*cos[Θ(t)] + sin[Θ(t)] = 0
where x(t) is a function independent of Θ.
I've been playing around with the ODE Solver.vi and a few of the model construction VIs in the Control Design & Sim toolkit. I've made a few disparate bits of progress, but I can't see a clearly-defined end in sight. Any input would be appreciated.
Cheers,
Adam Fern
Systems Engineer, CLD
Cyth Systems, Inc.
Solved!
Go to Solution.Thanks, Barp. That example is actually where I got the most useful information about addressing this problem. Unfortunately I didn't find it until after I posted..... I've always been terrible about using the Example Finder
I accomplished most of what I was after by following the example's paradigm of creating a subsystem representative of the 2nd-order equation and passing parameters to it inside of a simulation loop. Below is the pendulum subsystem along with the equation it represents. As far as I can tell, feedback conditions are handled automatically in simulations as it was unnecessary for me to place feedback nodes in the wires.
Here is the implementation inside the simulation loop:
The waveform chart is plotting the stimulus and response signals of the subsystem.
The little piece of code at the beginning () was my implementation of an iteration counter. The simulation loops are a strange beast and I had to figure out a way to step through my stimulus array inside the loop. Using the Simulation Time function and step size parameter, one is able to track the current "iteration" of the simulation loop.
This is also my first time really delving into the features of the CDS toolkit, and I found the 3-hour ppt course (http://www.ni.com/white-paper/5855/en) very helpful.
Adam Fern
Systems Engineer, CLD
Cyth Systems, Inc.
Attachments:
Dynamics Simulation.vi 210 KB
Pendulum Subsystem.vi 241 KB
Maybe you are looking for
-
Searching for Network / SIM card blocked - help please!!
I have just purchased an 8700c from a reputable eBay seller from whom I have previously purchased other items. The 8700c was advertised as Unlocked without a SIM card. I have never owned a Blackberry before and am just getting familiar with it. When
-
** Not able to Import RFC - RFC to RFC scenario
Hi Friends, I have created one technical system in SLD which is already configured with XI system. I have created one business system for this technical system. I have created one SWCV and one namespace. Now, I have tried to import one RFC under 'Imp
-
An unhandled win32 exception occured in TNSLSNR.EXE[1624]
Hi, I don't know if anyone can help me with this, but I always get the win32 exception error everytime I start the tnslistener and open the enterprise management console at the same time; well, the error will pop up in about 10~15 secs, and tnslisten
-
hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?
-
'Missing' Quick Time Component
Hi guys! I've just done a really big clean up of my hard drive and reinstalled everything, and all seems good apart from iMovie'11 (which was a part of iLife'11). When I launch the program I get a message that reads +"The QuickTime component necessar