SOURCE_PACKAGE and DATA_PACKAGE are incompatible in the start routine.

Hi All,
   I have seen similar posts on the forums, but none relate to my issue. Here is what I am seeing.
   I have installed a cube, DSO and transformations b/w the cube and the DSO from the business content. The transformations cannot be activated as there is the following error in the end routine...
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
This is a fresh installation and I have not done any changes. The delivered version code (only the relevant portions) is as follows...
Note: I have installed the transformations(TRFN) from the business content and have not migrated the update rules(UPDR) to transformations. So, this is an out of the box issue.
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
TABLES DATA_PACKAGE TYPE tyt_SC_1
CHANGING
    ABORT          LIKE sy-subrc
RAISING
    cx_sy_arithmetic_error
    cx_sy_conversion_error.
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Any help will be appreciated.
Thanks.

Hi,
just try this code.
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
TABLES SOURCE_PACKAGE TYPE tyt_SC_1
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.

Similar Messages

BW7.3 SOURCE_PACKAGE and DATA_PACKAGE are incompatible in the Start Routine

Hi Gurus,
a face a strange behavior with BW7.3 and the Inventory Cube 0IC_C03:
the standard scenario works well when I activate the cube and its transformations ..bx, bf and um. Then I have modified the InfoCube 0IC_C03 and added some field like 0customer or 0doc_number etc. I also added the fields to the InfoSource 2LIS_03_BF_TR and everything was as usual.
Then I wanted to activate the transformation TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03 when I had the error
"E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
I already tried to copy and paste the structure of tys_SC_1 to tys_SC_1_full but whenever I activate the transformation my changes are dropped while the error remains. I assume, that the problem is due the compilation process.
Any hints to solve the problem? Thank you in advance.

Hi Cemal,
When we do the modifications at times the field structures inside the start routine are not update so that updation is required to be done manually. Copy the field list of structure (inside the start routine) tys_SC_1 (this is gryed out i.e. change disabled) and paste the same structure to tys_SC_1_full & tys_TG_1_full.
Check the routine and save it.
Hopefully it will solve your problem.
Regards,
Dipika

The data types varchar and varchar are incompatible in the subtract operator

Hi ;
I want to fetch values 6,903,00 format ,my query is ;
SELECT CONVERT(varchar(50), CONVERT(money,SUM(DEBIT)),1) AS DEBIT ,CONVERT(varchar(50), CONVERT(money,SUM(CREDIT)),1),AS
CREDIT CONVERT(varchar(50), CONVERT(money,SUM(DEBIT)),1) - CONVERT(varchar(50), CONVERT(money,SUM(CREDIT)),1) AS BALANCE
FROM TABLE
it was get error : The data types varchar and varchar are incompatible in the subtract operator.
I want to Show result ;
DEBIT - CREDIT - BALANCE
6,903,00 4,387.24 2,515.76
Thanks in advance

You have to do the subtraction with the MONEY data type (prior to covert-ing).
Starting with SQL Server 2012, you can use the FORMAT command:
https://msdn.microsoft.com/en-us/library/hh213505.aspx
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014
We have to use SQL 2005 due to licensing issue .

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

Windows 7 pro lightroom 4 and 5 are locking up at start up. will not continue past the blue window

windows 7 pro lightroom 4 and 5 are locking up at start up. will not continue past the blue window of lr5

Hi,
I would like to know if the backup program has been uninstalled?
I suggest updating your graphic card driver from manufacturer's site and scanning the computer with your security software. Also test the issue in
Clean Boot. If possible, try to reinstall problematic games.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How does one ensure an automatic save function every 5 mins for any document you are working on. Yesterday I erased a doc I was on and had to rework from the start.

How does one ensure an automatic save function every 5 mins for any document you are working on. Yesterday I erased a doc I was on and had to rework from the start.

Well I understand that auto save is already present and saving your doc every 5 mins. But then why do you think, this did not happen yesterday in the following case?? I wrote one page of a long document and wanted to format it before proceeding. I selected the part to be formatted and instead erased it. I could not find that page again. I had to rewrite the matter.

Ipad takes photo every time I close the cover of its case. When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding.

When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding. It is just gobbling memory and annoying as I can only delete these pictures one at a time.

It seems to take a picture of the counter top = I do not see the keyboard.
I am wondering ....It may be a kids game app that takes pictures of the screen or out the back camera. I am starting to think it may just be a sound effect when placing the iPad on its screen. So many things that may be unrelated but coincedental. It started in May (the sound) and so did the multiple pictures - starting to think they are not related.
Thanks for the quick tip on deleting multiple pictures.

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

I have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!

I am about to buy the above products for home and a laptop I bought the high res laptop for editing photos and the photos look great on the display but I cannot use photo shop and lightroom
has any body had this problem and is there a simple fix that I have missed
taking the res down in the control panel reduces the res but does not effect the programme
by the way the dell xps is great
dave

Thanks for the info I know that there were problems with the high res
I am using the latest photoshop and bridge from the cloud but only using the trial copy at the
moment
I will look closer and try to scale it to a suitable level
thanks dave
Original message----
From : [email protected]
Date : 06/02/2015 - 00:39 (GMTST)
To : [email protected]
Subject : i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    created by gener7 in Photoshop General Discussion - View the full discussion
There is that pitfall in buying HiDpi laptops for Windows.
Only Photoshop CC 2014 has the option to scale the UI 200% in order to make it usable on these hires screens.
CC and earlier does not have this and Adobe would have to retrofit them. Not likely with older products.
Gene
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7167666#7167666 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7167666#7167666
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Diff between the Start routine and Update rules?

Hi Gurus
Diff between the Start routine and Update rules?
Thanks in advance
Raj

Hi,
Routines are like conditions or business rules that could be applied to filter the data while entering the BW system or could be used to apply certain conditions on the info objects itself.Update rule level you manipulate your data and write your start routine.
There are 4 types of routines
1. Start routine- Could be used at two levels (transfer rule level and the Update rule level)
This Start routine written at the transfer rule level helps filter the necessary data coming from the source system.
For Example: If you decide to extract data that contain only quantity greater than 500 , then you could specify the Start rouitne to achieve this.
The Start routine at the Update rule level provides similar functionality but at this point it helps direct specific data to
different data targets. For Example: If there 3 data targets being fed from the Infosource, you may want to apply some condition to each data target, like send year 2000 data ti Data target1, 2001 to data target 2 and so on. This can be achieved by using Start routine at the Update rule level
2. Transfer Routine: This feature is available at the transfer rule levels
While performing the transfer rules operation, there are 4 features available to the developers to create business rules on top pf the Infoobjects.
1. You could do a one to one mappping of the Infoobject
2. Provide a constant value
3. Include a formula
4. Write an ABAP routine.
These 4 options refers to the transfer routine
3. Update Routine:
The limitations of just having 4 options in the transfer routine is overcome at the update rule level. There are various other
sophisticated features avaialable apart from the 4 options mentioned above. These business rules could be specified pertaining to each data target.
4. Conversion Routine: It provides functionality to do Currency and unit conversion.
Regards.

I have some albums that only a few tracks are recognized and others are not. The difference in the info is that the pc recognizes the tracks that say aac matched and not the ones that say aac file. how can I fix that.

I have some albums that only a few tracks are recognized and others are not. The difference in the info is that the pc recognizes the tracks that say aac matched and not the ones that say aac file. how can I fix that. I have tried to creat new file but the message unknown error (-50) pops up. Also these files have played in the past

We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

IPhone 5 stuck on home screen and there are codes at the top??

So I plugged the phone in and it started charging like it should. When it had enough juice the Apple logo flashed and it should'be pushed me to the main screen of my iPhone. Instead it stayed on the start up screen with the apple logo and there are codes at the top of the screen that start with [nand]. There are about 10 rows of it. What should I do?

This error is hardware related and you should get the phone serviced by visiting an Apple Store or an Authorized Apple Service Provider.
iPhone - Contact Support - Apple Support

The field "SOURCE_PACKAGE" is unknown IN THE START ROUTINE?

Hi all,
i am trying to create a start routine in the DTP FROM THE CUBE TO THE OPEN HUB.
But when i check the syntax : it throws me an error message stating.
The field "SOURCE_PACKAGE" is unknown IN THE START ROUTINE?
how come the source package is unknow in the start routine can anyone pls advise me on this!!
DATA: l_tabix TYPE sy-tabix, wa_source_package TYPE tys_sc_1.
LOOP AT SOURCE_PACKAGE INTO wa_source_package.
l_tabix = sy-tabix.
IF wa_source_package-SALES EMP EQ ' '.
DELETE SOURCE_PACKAGE
WHERE SALESEMP EQ ' '.
INDEX l_tabix.
ENDIF.
ENDLOOP.

Hi Pooja,
I think that the error comes from the delete statement.
As you already said, the SOURCE_PACKAGE is from BI7.0. That means that the LOOP AT statement cannot be wrong (although I prefer field-symbols)
I would restate you code like below:
DATA: l_tabix TYPE sy-tabix,
      wa_source_package TYPE _ty_s_sc_1.
LOOP AT SOURCE_PACKAGE ASSIGNING <source_fields>.     "<source_fields> is declared as line from source_package
* l_tabix = sy-tabix.
IF <source_fields>-SALES_EMP IS INITIAL.
    DELETE <source_fields> FROM SOURCE_PACKAGE.
* If this line does not work, try to add TABLE after the FROM-statement
*WHERE SALESEMP EQ ' '.
*INDEX l_tabix.
ENDIF.
ENDLOOP.
Hopefully this will help.
Alternatively you can try a single statement, because it is not necessary to do a loop.
DELETE SOURCE_PACKAGE WHERE sales_emp IS INITIAL.
Good luck!
Steven Groot
Edited by: S. Groot on Aug 11, 2010 7:50 AM

"File" and "View" are missing from the ribbon in Excel, MS Office 2011, please help!

"File" and "View" are missing from the ribbon in Excel, I'm running MS Office 2010. Please help!

Post your question on the MS Mac forums as it's their software you're having issues with: http://answers.microsoft.com/en-us/mac?auth=1

SOURCE_PACKAGE and DATA_PACKAGE are incompatible in the start routine.

Similar Messages

Maybe you are looking for