Sourcing cockpit issue

Hi,
I am having two cases over here.
1) There are some SC which are sitting in my sourcing cockpit even after backend document is created.
2) There are some sc which are not supposed to go into sourcing cockpit.
I need to clean up both scenarios. Please advise if there is any function module or program to do that.
Points will be rewarded.
Munna

Hi,
1) There are some SC which are sitting in my sourcing cockpit even after backend document is created.
See the foll notes:
1050349 - Sourced Shopping cart reappears in Sourcing cockpit
527648
1084987 - Synchronizing documents and status between ERP and SRM.
0001072266 BBP_GET_STATUS_2: Item is not removed from Sourcing Cockpit
0001130842 BBP_GET_STATUS_2: shopping cart sent back to SOCO
0000691569 Error messages in BBP_GET_STATUS_2
0000989891 BBP_GET_STATUS_2: Incorr quantity determination in back end
0001001882 BID: Requirement reappears in sourcing cockpit
0001012124 SHP not reappear in SOCO after backend PO delete
0001027598 BBP_GET_STATUS_2: Error message E 011 in back end
0001032713 BBP_GET_STATUS_2: incorrect sourcing indicator
0001033208 Complete sourcing indicator is getting lost
0001040847 Requirement is removed from sourcing after BBP_GET_STATUS_2
0001041334 BBP_GET_STATUS_2 cannot handle more than one PO
0001044351 BBP_GET_STATUS_2: Error message with reservation
0001049989 External requirements: Object id not found error in XI
0001050349 Sourced Shopping cart reappears in Sourcing cockpit.
0001055375 BBP_GET_STATUS_2: Error message during conversion
0001056941 Shp. cart sent back to SOCO in case of P. Req. or Reservatio
0001062223 BBP_GET_STATUS_2: Performance and runtime error
0001062565 No reference of backend Object ID is updated in Shop. cart
0001066128 Shp cart item is not updated from the related PO
0001084144 BBP_GET_STATUS_2 sourcing relevant indicator
0001088315 External Requirement: Sourcing ind. flag is wrongly set
0001106550 SOCO: completed requirement is sent back to SOCO
2) There are some sc which are not supposed to go into sourcing cockpit.
-You can control this using the badi "BBP_SRC_DETERMINE".
For The existing ones in SOCO,run the report BBP_GET_STATUS_2.
BR,
Disha.
Do reward points for useful answers.

Similar Messages

PR to SRM Sourcing Cockpit Issue

In ECC, the ME_SOU* BADI is implemented to activate sending PR of type RV to go to SRM Sourcing Cockpit.
The necessary Workflow Event Linkages are activated in ECC to send the PR to SRM.
When the PR is released, it does not trigger the event to call the workflow. The event trace SWELS at the time of releasing the PR does not show any events triggered.
Any thoughts here to resolve this issue?
Thanks

Hi Kasee,
If you are going to transfer ECC PR to SRM via SOA, the following steps should be configured well in ECC side:
1, LOG_MM_P2PSE_1 should be activated via trx SFW5 in ECC side;
2, implement BADI ME_REQ_SOURCING_CUST;
3, go to trx SWETYPV and check if the following objects are existing:
BUS2015 RFXREQUESTED
BUS2105 SOURCINGREQUESTED
4,activate outbound message as below:
(ERP) Transaction SPRO -> Other mySAP.com components->Supplier Relationship Management->
Message Control-->Activate outbound messages through qRFC
BUS2015 RFXREQUESTED
BUS2105 SOURCINGREQUESTED
5, configure RFC destination for workflow system
6,configure RFC destination for SAP XI
7, create SU01 XI user
8, trx olme: Portal >Set Up Landscape
9, trx smqr: MMPURS_BUS2105_* should be registered.
XML message should be triggered after this.
You may also refer to the following notes:
note 1263876
note 1268336
Hope this helps.
Regards,
Ivy

SRM 5.0 Sourcing Cockpit (SP 09) issue

Hi,
I'm working on plan driven scenario with system SRM 5.0 (SP 9 - SAPKIBKT09) and ECC 6.0 (SP 8 - SAPKNA7008).
Yesterday we have upgrade SRM package to 09 from 08, and now we have the following issue:
when I try to convert SC (created from a back end purchasing requisition via plan driven channel) in sourcing cockpit into a GOA it's raised the following error <i>"Some backend documents could not be generated, or they contain errors"</i>, that before upgrade there isn't!!!
I hope someone could help me.
BR
Marco

Hi Marco,
for a. I still see the following option:
Get a PR into Sourcing Cockpit, extend the contract, close the PR in Sourcing
Cockpit (modify the email sent,when the complete button is pushed).
Besides, I would question the buyer, why he did not extend the contract on own
intension - seems there is a bigger stroy behind this requirements
For b., I am sorry, but I do not understand yet and I have no suggestion yet.
When one ECC PR is transfered to SRM the counterpart is one SC. I assume,
you want to group single items of several SCs into one PO? This would be
possible via the grouping function.
Cheers,
Claudia

Search Help for Custom field in Sourcing Cockpit

Hi SRM Experts,
I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
Thanks a lot in advance.
Thanks,
Koyya

Hi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya

Shopping cart item not appearing in sourcing cockpit

Hi,
I have an issue which is related to sourcing activity.
I ordered a shopping cart and the status is approved the product category is set to sourcing always carried out after ordering when I check the status of the line item it is showing that the line item is in purchaser work list,but when I login as a purchaser I am not able to see the cart in sourcing cockpit.
I have maintained strategic and operational purchaser roles for that user and product responsibility for that pruchasing group even then line item is not appearing in sourcing cockpit can any one among you throw some light on this.
regards,
IGA

hi,
Usually when I browse sourcing area the last work item should be my shopping cart line item.
But I am not able to find the line item in sourcing area,I searched in all possible ways,do you think I missed some sort of settings regarding this.
regards,
IGA.

Shopping cart not in sourcing cockpit after PO qty been reduced

Hi ,
We have a issue where a shopping cart was created with qty 100 and it came to sourcing cockpit.PO was then created for the shopping cart with the value qty 100. Later GR and Invoice was done for against the PO for quantity 25. PO qty was then reduced to 25. But still the shopping cart has not come back to the sourcing cockpit.
Table BBP_PDIGP shows the following value for the item of the shopping cart :
VAL ASN E = 0
VAL ASN = 0
VAL CF E = 25
VAL CF    =          0.00
VAL CF     =         0.00
VAL IV E       =     25.00
VAL IV       =       0.00
VAL PO E        =    0.00
VAL PO E AGG     =   0.00
QUAN ASN E      =    0.000
QUAN ASN      =      0.000
QUAN CF E =          25.00
QUAN CF       =      0.000
QUAN IV E    =       25.00
QUAN IV        =     0.000
QUAN PO E =        25.00
NUM ASN      =       0
NUM CONF     =       0
NUM INV     =        0
SOURCE REL IND = blank
My questions are :
1) Root cause of the issue ? Scenario where this can happen ?
2 ) How to resolve the issue ? Just changing the SOURCE REL IND to X does not suffice (Tried the FM BBP_PDIGP_DB_DIRECT_UPDATE to set the sourcing indicator ) . Only when I clear all the values shown above to zero (change the values from 25 to 0) , does the shopping cart comes to sourcing cockpit . But the SC come with the qty 100 which is not correct , it should be 100- 25 = 75.
Please suggest and pls answer all the questions.
REgards,
Saurav

Hi
as of now ,
if the deletion of purchase order can make shopping cart item available in the cockpit.
but you can not expect the sc item should goes to cockpit if the PO quantity has been reduced .
In the PDP scenario - SAP suggested some custom logic if the quantity increased in the PR and remaining item comes / shows in the cockpit but no sap never provide any solution for quantity REDUCED.
Muthuraman
The above is my experience but you can check with SAP what is the standard.

Type PO by item in Sourcing Cockpit (new field)

Hi Dear Experts,
I need your help again.
I`m working with extended classic scenario (SRM 5.0 and R/3 4.7)
I have a big issue in my process: I need to choose the type of PO by item in sourcing cockpig, but that needs to be done manually by the user, because I don`t have rule of business to include in the program for automatically determining the type of PO - by the system (like Pgroup or POrganization).
I checked the note 1052650 - Sourcing cockpit: Split criteria for creating follow-on docs, but this note doesn`t resolve my issue.
I need to include one new field in item level (Sourcing cockpit) and use this new field in split_po_loc_cmp_criteria.
Someone knows if it`s possible or not to resolve this issue ? Or Someone knows wich badi ou other criteria I need to use for solution this big problem ???
Thanks very much.
Best regards,
Cris

Refer this BADI BBP_GROUP_LOC_PO
Regards, IA

Shopping cart from catalog in sourcing cockpit

Hi experts
I have a doubt when I create a shopping cart from a catalog it's going to sourcing cockpit of the buyer I am in SRM 5.5 ECS, I have configuted in customizing for soucing option 5 Aut Grouping . Sourcing for itens whithout assigned souce,
It must send for soucing cockpit only itens without source.
Someone knows how to solve it?
Thanks
Nilson

Hi
Which SRM version are you using ?
<b>This is correct.. It's standard functionality...</b> For every shopping cart, created from catalogs, the SOS (Source of supply) - Vendor will always be available.. (Until and unless you have activated any other Active BADI) and once the Shopping cart is complete and is ordered... It will directly by pass the buyer and will directly go the Approver for Approval, if required.. Otherwise, Back-end document (PO, Pur Req.. etc ) will get created...
Do let me know.. Incase you still face any issues.
Regards
- Atul

Shopping cart not getting released from sourcing cockpit

Hi,
Am trying to release a shopping cart from sourcing, but it's not getting released. Mentioned below are the methods I've tried and area'a which I verified for possible error. The major challenge is it's not throwing any error message. Your inputs & guidance are really helpful & appreciated.
- Moved the SC to workarea in sourcing cockpit and tried creating PO - Failed w/o any error.
- Verified in backend BBP_PD - No error message
- verified in rz20 - No error message.
- Attributes used in SC - Verfied all the major values such as Vendor, account assignment, basic data etc - No issues.
- Tried creating PO creation in backend w/o posting it - able to create PO with same data.
Thanks & Regards
Aswini

Hi
Check it up any errors in the web application monitor. you must get some error message..
update us what was the error message. did you assign the vendor before you create a vendor in the sourcing cockpit?
are sc again goes back to worklist?
regards
Muthu

Sourcing Cockpit Worklist - Failure to pre-load worklist

Hello SRM Experts
We are running SRM 5.00 in an extended classic scenario. I have a question that is bugging me so hopefully you can help.
I have a user who is the sole purchaser in a purchasing group for a specific company code. He is responsible for almost all of the product categories and this has been reflected in the Responsability tab of the Purch Org Structure. Yet when he opens his sourcing cockpit, his worklist is not pre-loaded with the shopping carts awaiting his attention, unlike other purchasers that I have set up in the structure for other company codes. Yet if he uses the Find tab in the sourcing cockpit and specifies his purchasing group, all the shopping carts appear which he then transfers to his worklist which can be irritating having to do every time.
Thanks in advance
Ian

Hi Ian,
So you're saying that you have one user that encounters two problems (worklist and currency) that his colleagues (set up the same way) don't... Well, such user-specific oddities can be a real challenge. It could be difficult to trace the route cause. There're a number of possibilities, including authorization issues (even if you don't see the difference by manual comparison), some inconsistencies in BP-user-org relationships... Some of the things you can try (in no particular order):
a. run an authorization check <SU53> after the problem test (e.g. open worklist with the user, then check <SU53>).
b. run an authorization trace <ST01> during the problem test.
c. check for any BP/org inconsistencies related to your user in <BBP_BP_OM_INTEGRATE> (check all object types). Repair any errors or warnings.
d. have an ABAPer debug through your problem test (give the user debugging authorizations temporarily).
e. open a ticket with SAP Support.
Cheers,
Serguei

"HOLD" functionality NOT working in Sourcing cockpit.

Gurus,
I have 2 issues:
1)
I am trying to hold requsitions in Sourcing cockpit but when I add them to Workarea and click " HOLD" button it doesn't do anything ( NO Messagee, Nothing) and when I check back in it still shows the requsition item in the scourcing cockpit not the hold status.
I think the Hold Functionality is not working properly...is thee any fix to it or any OSS Note.
2)
We are facing a issue with the Vendor Text being getting copied from a catalog item to a Free Form item while the creation of shopping cart.
When I am creating a SC - say with 3 line items with 3rd line item as Freeform item and 1st and 2nd as catalog items then the vendor text is getting copied from the Catalog line items in to the Freeform line item.
So if two catalog line items are there then Vendor text gets copied twice in the Freeform Line item.
Is there any OSS note or any fix for this
Kindly advice.
ANKIT

Hi,
1)
Please go through these SAP OSS Notes ->
Note 1028009 Message 'Items are being processed by another user' 21.03.2007
Note 680265 Incorrectly translated message in sourcing cockpit
Hope this helps.Also seems to be a bug in the system,so paralley raise an OSS message.
2)
Note 816763 - Copy items does not copy vendor text and internal note
633726 - Internal note and vendor text are not copied
661820 - Internal note/vendor text disappears
Note 987686
Note 988490
Note 987640
Note 1021692
Note 930450 - Vendor text appears twice
Related threads:
Vendor Text and Internal Note in Shopping Cart
SRM 5.0 SP 9 - Text fields shown incorrectly in 'Documents & Attachments'
Text editor on top of page instead of under Documents
SRM 5.0 SP 9 - Text fields shown incorrectly in 'Documents & Attachments'
Re: Internal Note and Vendor Text field size
Internal note, vendor text
Re: Internal note text and vendor text disappears during the approval process.
BR,
Disha.
Pls reward points for useful answers.

Purchase Order error message when on Sourcing Cockpit.

Hi All,
I have encountered a series of error messages when I try to convert my Shopping Cart into a Purchase Order in SRM 5 within the Sourcing Cockpit. I am using Extended Classic Scenario and have defined the number range in SRM and ECC5. The error messages are below, the moment i try to concert the cart to a Po;
- Internal number range is missing for transaction type. Inform syst. admin
- Transaction type * does not exist. Check entries
- Some backend documents could not be generated, or they contain errors Further Information
- No status object is available for
I have checked the transaaction type, number ranges assignments, attributes in PPOMA_BBP but fail to find the cause.
Any pointers would be welcome!
Thnx,
Mike

Hi Muthu,
The number ranges are consistent as I have checked the number range for local purchase order and this is set as an internal between the range 3000000000 - 3999999999. On the transaction type for BUS2201 Purchase Order, 30 has been set as the Int Number Range, with all other fields left blank.
The strange thing is that the documents that failed to convert into a PO had been reprocessed in the Application Monitor for Purchase Orders, but when I go back into Sourcing to create the PO, I now get the message:
"You have either failed to select an item, or you cannot create a follow-on document due to an error that has occurred"
Regards
Mike,

Error in Sourcing Cockpit

Hi Gurus,
we're working with EC Scenario in SRM 4.0 and Sourcing Cockpit.
We can create the following documents from a shopping cart: Bid Invitation, Auction and Purchase Order, but not a Contract. The system goes exits out and dumps the following messages:
"Note
The following error text was processed in the system SV5 : Transaction type ECPO must not be used for object type BUS2000113
The error occurred on the application server itsv03_SV5_10 and in the work process
The termination type was: TH_RES_FREE
The ABAP call stack was:
      Form: ADD_MESSAGES_TO_LOG of program SAPLBBP_SOCO_APP
      Form: CREATE_FOLLOW_ON_DOCUMENT of program SAPLBBP_SOCO_APP
      Function: BBP_SOCO_EV_FOLLOW_ON_CREATE of program SAPLBBP_SOCO_APP
      Function: BBP_SOCO_EVENT_DISPATCHER of program SAPLBBP_SOCO_APP
      Form: FCODE of program SAPLBBP_SOCO_UI_ITS
      Module: FCODE of program SAPLBBP_SOCO_UI_ITS"
Could u help us?
Thx, Enrico

Hello Enrico,
Please maintain the transaction type for the BO/TransCat- BUS2000113 in the SPRO at the path SRM Server -> Cross-Application Basic Settings->Define Transaction Types and also if you have implemented the Badi BBP_DETERMINE_LOGSYS , please verify the code for the method ~CONTRACT_LOGSYS_DETERMINE.
hope this info will be useful.
regards,
Mani

Custom Error Messages in Sourcing Cockpit do not prevent PO creation

Hi forum gurus,
We are implementing SRM 5.5 SP 9 in extended classic mode. We have implemented sourcing cockpit too.
We have coded an error message in the 'BBP_ITEM_CHECK' BADI for the sourcing cockpit and it appears correctly in the sourcing cockpit when necessary.
However, the system still allows the PO to be created, despite the error message being visible prior to clicking on the 'Create Purchase Order' button.
Any ideas? I will create a customer message to SAP with this anyway, but hoped someone may know for certain how to resolve it!
Thanks,
Nick

Hi,
Use the BADi "BBP_DOC_CHECK_BADI".
See the foll thread:
authority check on Creation of Purchase order usin badi BBP_ITEM_CHECK_BADI
BR,
Disha.
Pls reward full points for useful answers.

PO split in sourcing cockpit ? :-(

Hello my helpful friends.je.je
I have quick question for the SRM gurus:
In the sourcing cockpit, I selected 20 items (per example) and the application splits those items among 2 purchase orders.
What is the reason of this behavior ? I know that ebp separates direct and indirect materials. But in this case everything is indirect.
Is there any field that may cause a PO split ?
Thanks and regards from Mexico !
diego

Following is the criteria which is used to split POs
For Backend Purchase Orders
Company Code
Purchasing Org
Purchasing Group
Document Type
Vendor
Subtype (Direct/Hierarchy)
FI Logical System
Logical System from where an External Requirement comes
For Local Purchase Orders additional criteria is used to split POs:
Delivery Address (for higher releases)
Procument Card Number
Procurement Card Company
Additionaly as mentioned by Vadim, check the Implementation of BADI BBP_SC_TRANSFER_BE (Method GROUP_PO) for any Customer Added Splitting Criteria.
Thanks,
Ashish

Sourcing cockpit issue

Similar Messages

Maybe you are looking for