Sourcing latest doc for SQ01 in ECC6.0

Apparently, I've been informed that there are differences in the way SQ01 works in ECC6.0, although I have been unable to find a PDF doc that covers using SQ01 in ECC6.
Has anyone come across such a document?.
Jas

Thanks much for the suggestions so far!
The problem is these errors are really somewhat intentional. I know what they are and why they are created and I have to have them created. In the past we would adjust the entry in the errors in session batch to make the desired postings in the ledger. Also another side effect of this is the next month will not process (obviously) because there are documents from the previous month not posted.
What we are doing is posting "dummy depreciations" on a couple hundred assets. The idea in the past was they allowed the system to calculate the depreciation from the asset master but then when it came time to actually post the dep they would change the entry by deleting the asset line and posting an offsetting entry to the same account as the dep. I know a little strange and I am not totally sure why this business decision was made, as it was some time ago and before my time.
Thx Again!
P.

Similar Messages

Where are the latest java docs for the 9i JDBC drivers

Hi, I'm trying to locate the java docs for the latest 9i JDBC drivers. I have searched all over the otn and oracle sites and still haven't found them. Does anyone know where they can be found.
Thanks,
Simon

I believe they're right on the download page where you download the drivers.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

How to use Source Code Control for Large Application?

Hi, All!
I would like to collect knowledge about "best practice" examples for using Source Code Control and project organization for relative large application (let's say approx 1000 SubVIs).
Tools used:
LabVIEW 8.0
CVS Server
PushOK CVS Proxy Client
WinCVS
With LabVIEW 8 we can organize large project pretty well. This described in article Managing Large Applications with the LabVIEW Project.
I have read this article too: Using Source Control Software with LabVIEW In this Article Source Safe used, but with PushOK all looks nearby the same and works (some tricks for compare function are required).
Example. Two developers working together on same project. Internally project is modular, so one developer will work with module "Analysis", and another one with "Configuration" without interferences. These modules placed into Subfolders as shown in example above.
Scenario 1:
Developer A started with modification of module "Analysis". Some files checked out. He would like to add some SubVIs here. So, he must also perform check out for the project file (*.lvproj), otherwise he cannot add anything into project structure.
Developer B at the same time would like to add some new functions into module "Configuration". He also needed to check out project file, but this file already checked out by Developer A (and locked). So, he must wait until lvproj file will be checked in. Another way is mark *.lvproj files as text files in PushOK, but then one of developers will get conflict message by checking in and then merging will be necessary. This situation will coming very often, because in most cases *.lvproj file will be checked out all the time.
Question: Which practice is better for such situation? Is Libraries better than folder for large project?
Scenario 2:
Developer C joined to the team. First, he must get complete project code for starting (or may be at least code of one Library, which assigned to him).
Question: How it can be done within LabVIEW IDE? Or WinCVS (or other SCC UI) should be used for initial checkout?
Scenario 3:
Developer D is responcible for Build. Developers A,B,C have added lot of files into modules "Analysis", Configuration" and "FileIO". For building he need to get complete code. If our project splitted into folders, he should get latest *.lvproj first, then newly added SubVIs will appear in Project Explorer, then he should expand tree, select all SubVIs and get latest versions for all. If Project organized in Libraries, he must do the same for each library, isn't?.
Question: Is this "normal way", or WinCVS should be used for this way? In WinCVS its possible with two mouseclicks, but I prefer to get all code from CVS within LabVIEW IDE recursively...
That was a long post... So, if you already working with LabVIEW 8 with SCC used for large project, please post your knowledge here about project structure (Folders or Libraries) and best practices, its may be helpful and useful for all of us. Any examples/use cases/links etc are appreciated.
Thank you,
Andrey

Regarding your scenarios:
1. Using your example, let's say both developers checked out version 3
of the project file. Assuming that there are only files under the
directories in the example project, when Developer A checks in his
version of the project, there will be new files in one section of the
project separate from where Developer B is working. Developer B,
notices that there is now a version 4 of the project. He needs to
resolve the changes so will need to merge his changes to the latest
version of project file. Since the project file is a text file, that is
easy to do. Where an issue arrises is that after Developer B checks in
his merged changes, there is a revision 5. When Developer A and B go to
make another change, they get the latest version which will have the
merged changes to the project file but not the referenced files from
both Developer A and B. So when A opens version 5, he sees that he is
missing the files that B checked in and visa versa. Here is where the
developers will needs to manually use the source control client and,
external to LabVIEW, get those new files.
Where libraries help with the above scenario is that the library is a
separate file from the project so changes made to it outside of the
project do not require the project to be modified. So this time, the
developers are using a single project again which time time references
two libraries. The developers check out the libraries, make changes to
the libraries, and then check those changes in. So when each developer
opens the project file, since it references the project file, the
changes to the library will be reflected. There is still the issue of
the new files not automatically coming down when the latest version of
the library is obtained. Again, the developers will needs to manually
use the source control client and, external to LabVIEW, get those new
files. In general, you should take advantage of the the modularity that
libraries provide.
2. As noted in the above scenario, there is no intrinsic mechanism to
get all files referenced by a LabVIEW project. Files that are missing
will be noted. The developer will then have to use the source control
provider's IDE to get the initial contents of the project (or library).
3. See above scenarios.
George M
National Instruments

Problem in Creating Source Files (Templates) for Original Application Files

Dear Friends,
I am trying to ccreate "Source Files (Templates) for Original Application Files" . I checked the link
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
I created a new DOc. type TMP with no statuses, checked in KPO, assigned no. ranges.
Created DIR & assigned the template file, checked into storage category. DIR no. 10000000390 created.
In Workstation application "DOX" in define templates for originals : doc. type: ZGA, application: DOX; language- EN; no - 01; In source doc- entered doc. type- TMP, doc. no.- 10000000390, part & version
Assigned for required source file copy" ZGA doc. type. -- Default Appl. as "DOX" workstation application.
Now created a DIR with ZGA doc. type, when clicking on originals , DOX prompted and clicking on "create with template" . TMP doc. 10000000390 template open in a new window. I edited & saved. close the MS word window. When comes to DIR, it prompted, Original was changed Do you want to save the original?.
clicked on yes.
Saved the ZGA DIR. When I saw the new ZGA DIR created it didn't capture. Where I went wrong ?
Regards,
Sai Krishna

Dear Ravindra,
By going this below link, it seems we can use template for creating ne wdocument & attach the same.
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
Following messages if you read, it may be clear.
By having templates in place we can utilize the pre-defined documents instead creating right from scratch.
Entries can be done in the Template and save the document.
Templates are used for standardization and uniformity. By using templates time consumption for creation of documents will reduce as most of the details are maintained in the master template and the same can be utilize by using the template when creating documents.
If in DMS editing functionality is not there what is the use of templates- documentation?
Regards,
Sai Krishna

Source of data for custom tables in Oracle Apps

Hi,
Is there any way to find the source of data for the Custom tables. The source can be either any function, procedure, package or a trigger or any other process. The reason why I need to know about it is because we have some custom tables that are used by some custom Reports. Sometimes those reports comes out blank because the data in these custom tables is blank. So I need to know which processes are populating data in these custom tables. Any help would be really appreciated !!
Thanks,
KM

Is there any way to find the source of data for the Custom tables. The source can be either any function, procedure, package or a trigger or any other process. The reason why I need to know about it is because we have some custom tables that are used by some custom Reports. Sometimes those reports comes out blank because the data in these custom tables is blank. So I need to know which processes are populating data in these custom tables. Any help would be really appreciated !!I do not think there is a direct way to find out the source of the data unless your custom processes are documented.
You may enable AutditTrail (search the forum for links/docs) and see if this would help.
Thanks,
Hussein

Is Oracle 11g released for NW04s and ECC6.0?

Is Oracle 11g released for NW04s and ECC6.0?
Please help. Thanks!

Plain and simple: No, it isn't.
Check the SAP on Oracle homepage [here|SAP on Oracle] in SDN and read the latest development news on this topic including a rough schedule.
regards,
Lars

Needed doc for PO creation

hi all,
can anyone give me steps for creating PO or screen shots.
i need it urgently.
i am new to this.
i will award ur efforts.
thanks
sanjeev

Hi Sanjeev,
At first not able to understand what you need to create doc for po.
in SAP below is the requriement to create PO, by considering you have organizational elements created.
1) Material Master - create in MM01.
2) Vendor Master - create in XK01
3) Source List - ME01 } Source list & PIR is not mandatory to create a PO.
4) PIR - ME11 }
Then go to T-CODE ME21N as yogesh mentioned, enter your vendor system will ask for organizational data, enter co.code, pur group, pur organization.
enter material code, qty, price, plant click on check & save, system will give you PO number.
PS : Kindly note by asking a question you will get answer in this forum & it is professional to awarad points or not. don't think if you mention you will award points you get better response or quick response.
Regards
Rang

Want docs for Web Dynpro ABAP

Hi All ,
Can anyone please send me the Docs or link for Web Dynpro ABAP .
Thanks in advance
Rahul

Hi,
Web Dynpro ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706
Also, I have the official Web Dynpro for ABAP documentation. Please let me know if I should send it to you.
Hope that the following also helps you.
Web Dynpro for ABAP (WD4A, WDA) is the SAP standard UI technology for developing Web
applications in the ABAP environment. It consists of a runtime environment and a graphical
development environment with special Web Dynpro tools that are integrated in the ABAP
Workbench (SE80).
Web Dynpro offers the following advantages for application developers:
? The use of declarative and graphical tools significantly reduces the implementation
effort
? Web Dynpro supports a structured design process
? Strict separation between layout and business data
? Reuse and better maintainability by using components
? The layout and navigation is easily changed using the Web Dynpro tools
? Stateful applications are supported that is, if the page is changed and the required
data remains intact so that you can access it at any time throughout the entire
application context.
Note that stateless applications are not possible.
? Automatic data transport using data binding
? Automatic input check
? Automatic operation of the Web Dynpro application using the keyboard
? User interface accessibility is supported
? Full integration in the reliable ABAP development environment
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
? Clear separation of business logic and display logic
? Uniform metamodel for all types of user interfaces
? Execution on a number of client platforms.
? Extensive platform independence of interfaces
Structure
Metamodel Concept
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
Graphical Development Tools
To support this declarative concept, both the SAP NetWeaver Developer Studio and the
ABAP Workbench contain a range of Web Dynpro tools. You can therefore generate a large
proportion of a Web Dynpro application using the tools provided, without having to create your
own source code. This applies to the following parts of the application:
? Data flow between the front end and back end
? Layout of the user interface
? Properties of user interface elements
The Web Dynpro tools enable you to create source text areas manually within generated
source texts. These areas are not changed if the source code is regenerated.
Separation of Business and Application Logic
Using Web Dynpro enables a clear separation of business logic and display logic. A Web
Dynpro application runs on the front end and has local or remote access to the back end
system via a service. This means that the display logic is contained in the Web Dynpro
application, while the business logic and the persistence of the business objects run in the
back end system. The following options are currently available for connecting Web Dynpro
applications and the back-end system:
? An interface generated using adaptive RFC, through which BAPIs of an SAP system
can be called
? An interface for calling Web services
? A self-generated interface
The source code required for connecting the Web Dynpro application can be generated
from a UML definition of the Web Dynpro interface. A UML definition can be imported
into the Web Dynpro tools as an XML file.
Conversion of the Model-View-Controller
Conversion of the Model-View-Controller Programming Model
Every Web Dynpro application is structured according to the Model View Controller
programming model:
? The model forms the interface to the back end system and thus enables the
Web Dynpro application access to data.
? The view is responsible for the representation of the data in the browser.
? The controller lies between the view and the model. The controller formats
the model data to be displayed in the view, processes the user entries made by the
user, and returns them to the model.
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
Reward points if useful
Regards
Anji

Docs for Fusion Middleware

Hi All,
Can someone help me locating a PDF doc about Oracle Fusion Middleware with architectural details and components. I am just finding html pages but need something in one doc for ease.
Thanks in advance
cpa

Sander,
Thanks for your reply. Actually, I don't need docs for Application Server. I need doc which can explain all about Oracle Fusion Middleware Concepts, Architecture, Components, Application (Not mandatory), etc in the form of a Presentable doc like PDF. Application Server is just a part of it. And I'd preferably need the latest version's docs.
Thanks Again
cpa

Java API docs for MapViewer

I'm looking for the Java API docs for the oracle.lbs.mapclient.MapViewer bean.
The mapviewer .pdf file has an API section, but only inludes descriptions of some of the arguments passed to the various methods. I'm using the 9.04 release - where should I look for these docs and/or source code?
Thanks,
Eric Everman
USGS

OK - I found them. They are part of the 9.04 kit as part of the web application.
***NOTE: It would be if oracle had all of its javadoc in one location, rather then rely on installations to provide docs.***
If others are looking for them, they are available as part of the installed web application at:
host:port:context/mapclient
Or, if you want file access to them, unzip the mapviewer.ear file that comes with the kit. From that unzip the web.war file. The viewerbean API docs are then located in the mapclient subdirectory.

Where is the doc for xml task options for deploy and ojdeploy-build ?

I am a new user.
I tried using jdev help to find my answer, but got lost quickly in the zillions of manuals.
1) Where is the manual/doc for the xml task attributes/options for the Ant tags <deploy> and <ojdeploy-build>?
I am modifying an xml script that ojdeploy will call, but do not know what attributes/options are supported for these tags. I need to know whether an option such as failonerror exists, so that I can report a bug that <deploy> does not default to fail on error (or that <ojdeploy-build> ignores the error and continues with the script.
Followup questions:
2) How do I find the java code that implements the tags <deploy> and <ojdeploy-build>?
3) How do I report a bug on the implementation for these tags and propose a fix (assuming I can see the java source code)?

I guess I wasn't clear enough. What I tried to say was:
1) Where is the manual/doc for the xml task attributes/options [I meant to say attributes/elements] for the Ant tags [I meant to say tasks] <deploy> and <ojdeploy-build>?
I did not mean the ojdeploy command, but the Ant tasks <ojdeploy-build> and <deploy>.
The jdev help does not seem to provide the complete list of elements or attributes for these critical Ant tasks, though it has a few examples.
So far, it appears that <deploy> has been misdesigned and I cannot do what I want, which is to "failonerror" (failonerror="true" should be the default but the opposite is true and there is no attribute to change the setting).
You could consider this to be a bad flaw in Ant itself, that you cannot get the exit code from every Ant task (since they are java programs they do have an exit code), so when new tasks are implemented by folks who lack experience they may leave out access to this programming feature that is however implemented for a bunch of important core Ant tasks such as "java" or "exec". It would have been far more useful to make this a generic feature of all Ant tasks. Of course then folks would be asking for stuff like "fail if" or "fail unless" and where would it end? Maybe with a real programming language like TCL but in XML form.

Need latest update for ACR

Anyone lead me to the quickest way to download the latest update for PS ACR?
SJ

I can't help with your problem since I don't have garageband, but installed the QT update with no problems. My advice? Get a bootable, external HD, and make a bootable backup/clone before upgrading/updating and ensure that works like the original. That allows you to revert to the previous good state without having to reinstall anything. Then, peruse these
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

Latest os for 9800 as May 2013 ?

what is the latest os for 9800 lately ? i need to change the new 1, please anyone ?

Hello,
Unless someone happens to keep track, there isn't a really good source of an answer to that question. It all starts with the official download portal:
http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
Since they are responsible for all support, release of the OS is controlled by each carrier to their end users. So, to answer the question regarding your specific carrier is relatively easy...you navigate the portal to your carrier and compare the various OS levels that they presently support for your specific model number BB.
But, some carriers are slower than others to release newer OS's...and therefore "the newest" might not actually be released by your carrier yet. Hence, to truly find the overall "newest", you must dig through the portal to find all carriers that support your specific model number BB...and then compare the OS levels that each supports.
You are not restricted to using your carriers OS levels...with the proper tricks, you can use any OS package from any carrier, as long as it's for your exact same model number BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
iTunes: Restoring iOS software - Support - Apple

I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going?

I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
Best regards,
Michele

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Sourcing latest doc for SQ01 in ECC6.0

Similar Messages

Maybe you are looking for