SP 2013 and SQL SSRS 2012 integration

I've done this installation successfully a few times before. On all other times for SP 2013 with SQL 2012 SSRS, I installed on the application server because it was the only server.
This time I'm installing into a FARM. One of the DEV guys asked me to install it on one of the WFE server in the farm so i did. The installation was successful. to verify the installation I run this command.
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstanceand I get this reply..WARNING: 'SQL Server Reporting Services Service' is already started on server 'Server1'The next steps are to create a reporting services application. However, in central admin, that option doesn't show up under "Manage Service Applications" - "New"The Microsoft instructions say this means it wasn't installed correctly. When I go to manage services, then select my WFE server, it doesn't show SQL Server Reporting Services Service Yet when I go back and re-run the shell command it says it's installed and running. I've rebooted the farm to no avail. Anyone know what I did wrong?Am I supposed to install this on the application server instead of the WFE?Any help is greatly appreciated.

Is "Server1" a WFE?
WFE, depending on memory and other usage patterns, can be faster to run SSRS on than the App Server. Did you run "Install-SPRSService" and "Install-SPRSServiceProxy" on Server1?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

Please follow below technet article :
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
Installing and Configuring Workflow Manager 1.0 (Step by Step)
Note: The steps in this article apply to SharePoint Server 2013.
The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

SharePoint 2013 and SQL Reporting Services Integration Mode

I'm setting up a production environment with SQL Server 2012 SP1 (Clustered) and SharePoint 2013.
I successfully setup the integration using PowerShell (Install-SPRSService & Install-SPRSServiceProxy). I can see the SQL Reporting Service on the CA Services and it's started, I've also created the Services Application without any issues (And linked it
to my web application). However the Report Server Integration feature is missing from my site collection and so are the content types. I even tried creating a new site collection and no dice.
Appreciating any help.
Best,
MI

Hi MI,
As per my understanding, I think this issue is caused by you haven’t install the Reporting Services add-in for SharePoint Products or is not installed correctly. If we install the Reporting Services add-in for SharePoint Products after the installation of
the SharePoint Server, then the Report Server integration feature and the Power View integration feature will can be activated for root site collections. For other site collections, we can manually activate the features. To fix the issue you occurred, we should
install or reinstall the Reporting Services add-in for SharePoint Products.
For more information about Install Reporting Services 2012 SharePoint Mode for SharePoint 2013, please see the following article:
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SharePoint 2013 and SQL Server 2012

Hi all,
I've looked around and not found a concrete answer to this question; or maybe I have and just haven't realised! Anyway.
We've currently got a license for SharePoint 2013 Enterprise, and are working on introducing Business Intelligence capabilities, namely Power Pivot and Power View. We'd like the data to be refreshed regularly, meaning we need Power Pivot on the SQL Server.
As Power Pivot and Power View are listed as features for SharePoint 2013 Enterprise, is it enough to have the Enterprise licence for SP2013, and use a SQL Server 2012 Standard License, installing the Power Pivot configuration tool along with the required
SSRS for Power View? Or do we need a SQL Server 2012 BI / Enterprise License to make use of Power View and Data Refresh on SP 2013?
I've also seen talks of installing SQL Server 2012 SP1 -- I'm new to all of this, but would having SQL Server 2012 Standard License alongside installing SP1 be sufficient for the above features?
Many thanks for any help.

PowerPivot/PowerView do require the BI or Enterprise editions of SQL 2012 (and yes, SQL 2012 SP1 is required for SharePoint 2013). These instances must be installed on the SharePoint server, not the SQL Database Engine server. You can use SQL
Standard for the Database Engine server.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

UCCX 10 and SQL server 2012 Integration - Read Step returns 0

Hi All,
I managed to integration the UCCX with SQL 2012, when I press Test, it goes successfull.
However, I put the very simple Read step which does : "SELECT * from Table" , but it returns 0.
I put wireshark on SQL Server and found out the communication seems to be OK.I can see
SQL Batch
response
ACK
But still not sure wht the read step return 0.
Thanks,
Hamed

Hi,
if you mean that pressing the Test button returns 0 in the "Number of rows returned" field, it's perfectly normal.
Does the subsequent DB Get step return anything?
G.

Is it possible to install SharePoint 2013 and SQL 2012 on single Azure Virtual Machine

I had a Azure subscription, I need had created only one Virtual Machine, is it possible to install SharePoint 2013 and SQL Server 2012 on that single virtual machine in azure.
I had SharePoint 2013 and SQL Server 2012 licence from MSDN subscription,
Finally on Azure virtual machine is it possible to Install SharePoint 2013 and SQL server by downloading these software from MSDN.

Hi,
It is supported to install sharepoint 2013 and SQL server on the same server. However, please check the size of your Azure VM and make sure it is compatible for that.
The minimum recommended size for a virtual machine is A3 when using SQL Server Enterprise Edition. Select A3 or higher when using SQL Server Enterprise Edition. Select A4 when using SQL Server 2012 or 2014 Enterprise Optimized for Transactional Workloads
images. Select A7 when using SQL Server 2012 or 2014 Enterprise Optimized for Data Warehousing Workloads images. In addition, the default size for SharePoint 2013 image is A3.
In addition, as a best practice, you can install them in different servers and then deploy SharePoint 2013 with SQL Server AlwaysOn Availability Groups in Azure:
Deploying SharePoint 2013 with SQL Server AlwaysOn Availability Groups in Azure
http://msdn.microsoft.com/en-us/library/azure/dn275959.aspx
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Which Laptop is good for VS 2012/2013 and SQL SERVER 2008 R2 /2012 ?

Hi,
I am planing to buy a laptop.
I am gonna be using mostly for Visual sStudio 2013 and Sql Server 2012 .
my budget is $1000.
confuse between DELL/ HP / LENOVO..!!!
please help.

This is only a personal taste of mine:
I prefer to work in Virtual Machines. In fact I did set up a VM just for my programming. This has the advantage that games and other stuff are not slowed down by SQL Server Services and similiar stuff.
This also allows me to quickly make a small virtual networks with multiple clients if I need to test some client/server stuff.
Plus I am also a bit of an adminstrator and prefer to test stuff in VM's before I try them in the real world.
I prefer using Virtual Box for Virtual Machines, so one thing of big importance was support for VT-X/AMD-V. Without them Virtual Box cannot run x64 guests even on a x64 host system.
Otherwise I wanted Windows 8 (so I could finally learn to live with it/learn programming for it's UI). And of big importance was an upgrade of gaming ability (my old one had difficulty/impossibility to run most current games).
So I bought a x64, Win8 Gaming Laptop with 8 GiB RAM (so I can run 3-6 Windows 7 hosts in paralell) and looked that the CPU supported Hardware Virtualsiation.
Otherwise pretty much every current laptop will work. x64 OS might be prefereable, as .NET has some limitations under x32/x86 OS (like the
2 GiB limit). Multicore (2 or more) is pretty much the state of the art (are there still any single core CPU's out there?).
It of course needs to be a Windows (7 or 8) to support VS. New Laptops should have UEFI (all that are sold with Windows 8 have).
If you do not need a lot of storage, using a SSD instead of a HDD will propably speed up startups (Windows, Programms) and compilation times a lot (those are disk-heavy operations) - but I only know that it should and heard of people who have them.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation

Hello,
We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
access data via reports.
Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
How do we configure our Datasources on sharepoint so both could be acheived.
Our Database and Sharepoint are on different servers.
Thanks
Deepak

Hi Deepak
For your first question:
while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
Thanks
Bala

Create failover cluster to host Windows 2012 DC, Exchange 2013 and SQL as VMs

One of our clients has running Windows Essential 2012, SQL and exchange 2007 as VM on VMware for 4 years without major issue. However, the physical server is getting old and have some hardware issues recently. They have budgets to buy two Dell servers, EqualLogic
SAN, Windows server 2012 Datacenter and Exchange 2013. Is it possible for them to create failover cluster to host Windows 2012 DC, Exchange 2013 and SQL as VMs?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

We will move all VMs from VMware to Hyper-V. Thank you.
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on <a href="http://www.chicagotech.net">http://www.ChicagoTech.net </a>
How to Setup Windows, Network, VPN & Remote Access on <a href="http://www.howtonetworking.com">http://www.howtonetworking.com </a>

Lync 2013 and SQL 2012 on the same server

Hi,
I'm in the process of migrating Lync 2010 to Lync 2013. I have a clean install of Windows Server 2012 R2. Is it possible to install Lync 2013 and SQL 2012 on the same server or does it have to be on separate servers.
Thanks
P

Configure Separated SQL Server to use in an Enterprise deployment of Lync Server. Standard Edition servers use a collocated SQL Server Express version of SQL Server that is right sized for the workloads of a Standard Edition server.
Also you can refer below link
http://technet.microsoft.com/en-us/library/gg425848.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
 test.Reset();
 test.ProcessingMode =
ProcessingMode.Remote;
 test.KeepSessionAlive =
true;
 test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
 test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
 test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

Workflows 2013 and SQL Report Services: Configure on Independent Servers or Existing App Servers?

Currently, my SharePoint 2013 Farm has Workflows 2013 and SQL Report Services installed on app servers, along with other applications. Workflows 2013 isn't working correctly (installed prior to my coming on board with the organization), I'm assuming it
is a configuration issue, but rather than re-configure, I've read that is recommended to be a standalone server. It was also recommended by a MSFT rep that our report services have its own independent server. Currently, Report Services is also installed on
an app server that runs other applications on the farm.
Has anyone had any experience with installing Workflows 2013 and/or SQL Report Services on independent vs. existing application servers?
Additionally, my existing application servers have 24 GB of RAM (I believe the recommendation for SharePoint production environments is 12 GB), should I plan for the potentially new servers (Workflows and Report Services) to also have 24 GB of RAM? Not really
sure if it will be needed if they have dedicated tasks.
Thanks for any input you can provide!

It entirely depends on load. WFM will work just fine installed on servers in the SharePoint farm. SSRS preferably should go on the end-user facing servers for better performance.
The questions you're asking are all "it depends" :)
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint 2013 and SQL Server AlwaysOn - HA

Hi guys,
Please help!
I need to setup SP13 server on SQL 2012 AlwaysOn (on sql01 and sql02). The HA AlwaysOn group already configured by DB team on these 2 replica with and called SP_AOAG alias
My question is can I use this alias to setup SharePoint or I need to configure the HA AlwaysOn group for SgharePoint as suggested in the article below:
http://blogs.msdn.com/b/sambetts/archive/2013/04/24/sharepoint-2013-and-sql-server-alwayson-high-availability-sharepoint.aspx
Any advice greatly appreciated .
BalaiP

You do not want to use a SQL Alias with an AG Listener. Just point SharePoint straight at the AG Listener. You will need to manually add any accounts to non-primary instances. You do not need to add them to individual databases, of course. You will also
need to manually set MAXDOP to 1 on non-primary instances.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Virtual Lab: Exploring SQL Server 2012 Integration Services - Setup script fails

I am trying to work through a Lab, but cannot get past the Setup script stage.
The lab is "Exploring SQL Server 2012 Integration Services". I have tried this several times (with new lab instances) and the result is always the same.
I double click the Setup command ... Press 2 ... when the popup dialog appears I press Ok ... the progress bar completes and the messages in the text box seem to indicate everything has completed (last line says "Done"). I click Close as per the
instructions and then the script moves to the "Configure SQL Server" stage.
After a short delay a number of error messages appear: "Could not open a connection ... Login / timeout expired" etc - basically it can't find or can't connect to the server.
I expected these labs to work seamlessly :)
Anyone know what's going wrong here?
Thanks,
Larry

I am moving it to SSIS.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

SP 2013 and SQL SSRS 2012 integration

Similar Messages

Maybe you are looking for