My HP 5610V all-in-one is no longer recognized by any pc as a working equipment.

My HP Officejet 5610v All-in-One is no longer recognized by any of my pc's.  When I plug it in to another pc it says that the device is not recognized or malfunctioning.  All the local or off line functions of the printer, such as copy and fax is working just fine, but it is no longer recognized by the pc as a printer or any functioning device.  I change the printer cable already and setup the printer to the original factory settings but no change.

I have XP Pro in one of my laptops and Vista on the other.  I really don't think this is a PC or operating system issue because both pc's used to recognize this printer but now both of them say that it is a malfunctioning equipment that is connected to the usb input and it is not recognized at all by the pc as to what type of equipment it is and they recognize other printers immediately.  
Thanks for trying to help anyways.

Similar Messages

  • HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't  edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

    I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't  edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
    Any suggestions?

    If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name.  (Deleting the account from your phone does not delete it from iCloud.  Your data will be synced back to your phone when you sign back in.)
    If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off.  When prompted choose to keep the data on your iPhone.  (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.)  After everything is turned off, scroll to the bottom and tap Delete Account.  Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On.  When prompted, choose Merge.  This will upload the data to your new account.
    You won't lose any photos in your camera roll or photo library.  If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account.  To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

  • Computer was updated to windows 7. my hp officejet j4580 all in one will no longer copy or fax.

    computer was updated to windows 7. my hp officejet j4580 all in one will no longer copy or fax.  Never figured out how to scan.  Will print from computer.  Warranty expired.  Anyone have same issues?  Know how to fix?  Deleted and reinstalled copier still didn't help.  THANKS

    you need these:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77751-1&cc=us&dlc=en&lc=en&...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • My C7280 all in one will no longer scan

    My C7280 all in one will no longer scan to my computer. I get an error message that says "no scan options, refer to device documentation to troubleshoot". I have tried all I know. I have re-downloaded the origianl disc software numerous times to no avail. I have gone on line to download the software to no avail. I just get a message that states there was an error in the download.

    Hi,
    Please follow the steps in the following document.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02450835&cc=ad&dlc=en&lc=en
    Thanks,
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HP8500A all-in-one can no longer scan thru wireless network but prints fine.

    HP8500A all-in-one can no longer scan thru wireless network but prints fine. Have used this device several times over past 2 years on different wireless networks (at home) but usually at some point I lose wireless scan function but maintain wireless Printing.  I used to be able to reload the software and resolve the issue but now in this "new network" cannot get wireless scanning to work.   Setup software; original software (CD) and current download as well as "Print/Scan Dr"  hangs-up at "network check"  for hours.  Compaq laptop, Dell Laptop, Cell phones and Roku work fine thru network.  Scanner works fine with USB to Laptops.

    Which model Epsons are they?
    I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
    (Your profile says 10.6.7 BTW).
    Maybe the scanning function is not compatible with Yosemite.
    You could try a few things:
    reset your wifi system:
    power down everything: modem, router, computer, printer/scanners.
    wait a minute.
    power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
    try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
    uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
    If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

  • Officejet 7310xi All in One Printer no longer connects wirelessly

    Hello all,
    My Officejet 7310xi All in One Printer no longer connects wirelessly.
    The printer does no show up while searching for it wirelessly where it had previously.
    In the past it would say that the printer (HP Series 7300) was offline.  I would remove the device through the control panel and search again.  A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device.  I would default to the new printer icon, Copy 1, and it would work.  This happened over the course of a year without any problems.
    Now nothing is working.  The printer can't be found by my network.  I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
    Although the printer has a built in  network set up option, it has no installation wizard.  I can't find a way to activate the wireless feature/icon.  There is no I.P. address either.
    I feel like a monkey pulling levers for a banana!  I appreciate your help.

    Hey @Kathlanta ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
    By the end of this I want you feeling more like this;
    Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
    Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
    Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
    Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
    You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
    Look forward to hearing back from you! Have a good one!
    I worked for HP.

  • My All-In-One 6500A Plus won't print any color from Internet Explorer (v8.0).

    My All-In-One 6500A Plus won't print any color from IE (v8.0).  I can print all colors from Word, PDF documents, photos, etc. - but not from ANY web page.  At first it only printed Magenta ink, now it acts as if it's printing (feeds the paper, moves the print heads across the page and sounds like it's printing) but the paper comes out blank every time.  If I change the print options to print grayscale and only use black ink, I can get a black only image of the web site.
    As I said, ALL OTHER APPLICATIONS PRINT FINE.  ONLY WEB PAGES WON'T PRINT, so please don't tell me it's the ink cartridges.  ;-)  

    Fourteen views and no answers in two-and-a-half days!! 
    I guess it's time for me to change printer brands.  It will be a long time before I get an HP anything again!

  • Printing problem with 5610v all-in-one.

    After replaceing a print cartridge the printer started printing with a shadow. That is, the print has a second light image before the main character is printed. I do not know why this is happening and I need to change the charicteristics of the printing back to normal. I have cleaned the new cartridge and I have replaced the cartridge. I have also aligned the cartridge but nothing helps. Suggestions will be greatly appreciated. My all-in-one is a little over two years old and I use Windows Vista Home Premium 64 bits. 

    Try doing this:
    1. Unplug the power cord from the back of the printer and from the wall outlet.
    2. Wait for a minute or two.
    3. Reconnect power cord directly to the wall outlet.
    4. While the printer is still unplug from the back, press and hold the pound (#) and six (6) buttons at the same time.
    5. While holding the pound (#) and three (6) buttons, reconnect the power cord to the back of the printer and then release the buttons.
    6. Turn on the printer if it won't turn on after some time.
    7. Follow the instructions on the LCD.
    8. Try doing a copy in black after the reset is successful.
    Please keep me posted if it works.
    Message Edited by smartfriend on 11-25-2008 06:28 PM
    Please click on KUDOS if you find my solution helpful.

  • All in One Printer no longer scanning (C5280)

    I have an oldish printer/scanner that was working fine until I downloaded the update that came from HP on Aug. 13th. Since then, I cannot scan. I got an error message that the machine was disconnected from the computer which made no sense since I can print from the computer just fine. I did all the things the error message suggested: rebooting, disconnecting the cable, redownloading the driver. The machine worked for about 5 pages of the scan after the redownload, then conked out again.
    I saw some directions about going into the registry editor window but they were for Windows 7 and below. I have Windows 8. I did not see a folder for Digital Imaging in the HKEY_LOCAL_MACHINE/Software/H-P
    If there are updated directions for Windows 8, pleae let me know.
    I have an All in One Printer (C5280)

    Hello @Toonces , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing scan issues.  I would like to try and help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Photosmart C5200 All-in-One Printer series Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Officejet Pro 8620 All in One Will No Longer Scan in Color

    Hello,
    I have an Officejet Pro 8620 all in one.  I was scanning a few items last night and the first few items came out in color fine. Then all of the sudden as I continued to scan the next few images would only scan in black and white.  I cannot seem to get the scanner to scan in color again.  How can I fix this?  I did not change any settings or anything while I was scanning so I do not know why the sudden change to black and white?  I am on a Mac computer with all newest operating system etc.  
    Thanks in advance

    Hi there
    I have some more suggestions for you to try. Please try them in order I have written them in.
    Reset the printing system
    Repair disk permissions
    Restart the Mac
    Install the Full Feature Driver here: HP Officejet Pro 8620 e-All-in-One Printer series Full Feature Software and Drivers
    In addition, download this Apple driver: HP Printer Drivers v3.0 for OS X
    That should do the trick!
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My Epson wp4535 all in one will no longer scan.  Where can I find an updated driver?

    I have an Epson WP-4535 Workforce Pro all in one printer, scanner, fax machine.    Since upgrading to mavericks the scanner will no longer work- an error message comes up to say that "you can't use this version of Epson Scan."
    I must need an uodated driver - Epson says to look via the Apple site but I can find nothing there.
    I need my scanner for work.  Help please!

    Try using Image Capture

  • HP Pavilion All in One computer No longer responding

    I have a HP Pavilion MS 213 that was given to me by my son, he started having issues with it 2 months before warrenty expired but never got a resolution so he gave up, bought a new computer and gave this one to me.  (Purchased 11/26/09)
    It would blue screen numerous times and finally after researching online, I figured the Hard drive was failing, so I bought a brand  new WD drive (same 500gb)  and everything was fine until yesterday when again, the blue screens started up. Now all I get is "Operating System not found, and can not go any further than that. 
    I can NOT get into the Bios, can not get the CD Rom to open so I can put OS Disk in, just goes right to "Operating system not found."  
    From other research, I see that HP knew of some Motherboard issues with the All in Ones but can not find reference to this on the forum here. I have a feeling it is now a Motherboard problem and not a HD as the HD Is so brand new.
    What other things can I do to get this computer working again, I really like this computer and am very lost without one and can not afford to buy another (using my daughter's laptop for the day to research and post here)   
    Will HP stand behind the computer or like most others that once the warrenty is done, you are nothing?  I hope they are better at support than Others out there, and stand behind what they produce.  I am to the point of Frustration with this!!
    Any Help out there???

    Hello there @DAVIDA64, welcome to the forums
    I read through your post about the issues you are having with scanning to your network folder. My best suggestion would be to check out the guide below and set up your scan to network folder again.
    HP Officejet Premier 8500 (A909n) and Wireless 8500 (A909g) All-in-One-Printers - Set up and Use Dir...
    Best wishes, have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP 8500 ALL IN ONE - CAN NO LONGER SCAN TO SHARED FOLDER

    I have had an HP 8500 all in one scanner / printer for a while and have not had any problems with,
    Yesterday the printer hung so I reset it.
    I am using ethernet (wired) as opposed to wireless.
    When I reset the printer it gave it a new ip address of which I reconfigured back to the address of my network ie 192.168.7.xxx
    I am able to print and scan from the embedded printer web page but when I scan to my shared folder, the printer cannot conect.
    Does anyone have any ideas?
    I think it may be something either to do with the network path or possibly the sharing permissions fo the network folder.
    Thank you in advance for any assistance that can be provided.

    Hello there @DAVIDA64, welcome to the forums
    I read through your post about the issues you are having with scanning to your network folder. My best suggestion would be to check out the guide below and set up your scan to network folder again.
    HP Officejet Premier 8500 (A909n) and Wireless 8500 (A909g) All-in-One-Printers - Set up and Use Dir...
    Best wishes, have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Epson All-in-One can no longer scan.

    I own two different Epson All-in-One printers that worked perfectly fine for Wi-Fi scanning.  Now, they do not appear anywhere as a scanner.  I have ensured all software and drivers are current.

    Which model Epsons are they?
    I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
    (Your profile says 10.6.7 BTW).
    Maybe the scanning function is not compatible with Yosemite.
    You could try a few things:
    reset your wifi system:
    power down everything: modem, router, computer, printer/scanners.
    wait a minute.
    power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
    try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
    uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
    If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

  • C6180 All-in-one - will no longer copy

    Recently my C 6180 All-in-One stopped being able to copy, or scan (haven't tried faxing) I get error message on printer window: "Unable to scan, copy, or send a fax". it will still print a document from the computer. No ink cartridges are "expired" (ie, "you have to keep buying our cartridges, even if you try to be frugal, or we'll break your computer"). Tried all the HP suggestions from their Help section - unplugging from unit and power source, plugging into wall socket instead of surge protector, restarting the computer, etc. Keeps failing and the only way I can turn it off is by unplugging it, even though it says to use the power button. And it's well out of warranty.

    Hello Eli9,
    Welcome to the HP Support Forums!
    I am sorry to hear that your C6180 has an error "Unable to scan, copy, or send a fax". I also read your updated post, since the error does not happen when using the Automatic Document Feeder (ADF) it would seem that a hardware failure is present in the scan mechanism.
    I think this because when the ADF is used, the scan mechanism remains stationary. When the glass is set to be used the scan mechanism needs to move the full length of the glass. If you hold up the lid for the glass, does the scan mechanism appear to be straight vertically?
    If that be the case, I am not aware of a fix sorry to say.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • How do I store music on my ipad and use music match?

    Using an iPad2 with Music Match, how can I store music on my iPad as well? Using iTunes 11, I no longer seem to have the ability add music to my iPad. If I try to manually drag and drop them onto my iPad an error says " Some of the files were not cop

  • Help, I can't view my thumbnails

    Hi, I am operating iphoto 6.06 on my 2006 imac. Somehow I must have hit a button but I can't seem to view my photo library in a thumbnail grid anymore. Each photo shows up individually on the screen and they are a large size(as if you have double cli

  • TS5376 11.1.4 issue.  If I remove eveything to do with iTunes and reinstall as suggested will I loose all my playlists etc?

    My profile on Windows 7 home is set to Administrator and always has been i.e. before iTunes was originally installed.  I haven't backed my phone up in a while but found my 3GS stating that it needed to be updated before I could make any more calls. 

  • Create default sales area data on BP creation using BUPA_GENERAL_UPDATE

    Dear all! We have the following requirement: whenever a user creates an organization in WCUI, we need to create some default data for the BP in the background, such as relationships (employee responsible, etc) and sales area data. I have created an i

  • Workflow failing

    We are running wss 3.0. We have a webpart in one of our site that utilizes two custom work flows. When users attempts to execute the work flows, they get the following error in the browser. I have checked both work flows and they check out okay. The