SP-3102 - Unable to make VOIP phone calls after switching router

I had to change the router from Netgear (g) to Belkin N+ (n). Changed the SPA-3102 config to DHCP, it picked up an IP and showed the 1st 3 LEDs lit, status Registered. So, good news.
I am able to receive VOIP phone calls, but not able to make phone calls, it won't dial. I installed slogsrv.exe and got the following log: syslog.514.log. Unfortunately, it's chinese to me.
Please help,
            Daniel

Try checking any settings on the old router which you might need to configure also on the new router to get VoIP working like port forwarding, dmz or disabling the NAT. The Belkin might have a feature like NAT which behaves differently so you might need to open up VoIP ports or enable NAT mapping and NAT Keep Alive on the SPA.

Similar Messages

  • Unable to make a phone call or send a txt message through Siri

    hi,
    i live in Sudan & i just bought an unlocked AT&T iphone 4S , i've been trying to use siri to send a txt msg & make a phone call but it says it cant help me with that, how do i fix that?!

    Of course i do, but it still wont work ... when i try she says "Sorry she cant make that phone call" when i ask " Why" she answers " i dont know. i've wondered that myself"

  • Why can't I make a phone call after updating to iOS7?

    Since updating, anytime I try to make a phone call it appears that the phone connects but I cannot hear anybody on the other end.  All I hear is my own echo?
    Has anybody else had this experience?
    Any ideas?
    Help!!!!

    That screen is telling you the iPhone has entered the recovery mode...you must follow the recovery mode instructions in http://support.apple.com/kb/HT1808 to attach to a computer running iTunes, in summary:

  • I am unable to make or receive calls after the 6.1 update.  I have restarted, restored and reprogrammed without any positive results.

    I am unable to make or receive calls since I completed the 6.1 Apple update.  I have restarted, restored and reprogrammed without any positive results.  I hope that someone can assist me.
    Thank you in advance!  I appreciate your help!

    Thank you!  I went to the Verizon Wireless Store and everything is okay with regard to my carrier.

  • IPhone 4S unable to make or receive calls after ios6.1

    Since installing iOS 6.1 my iPhone 4S is unable to make calls and any incoming calls go straight to voicemail - any suggestions on  how i can Fix this?

    Yes contact your cell phone provider.

  • Unable to make or receive calls after unlocking

    I just ported networks and got my 4 unlocked through the network and iTunes. I can not make or receive calls. My network have sone everything they can but say the problem is not on their side. I have checked all the settings and I have re-installed but canted figure it out.

    You followed this ,to the letter
    How to unlock your iPhone for use with another carrier

  • 7962 VOIP Phone Dies After switch upgrade/reboot

    Hi
    Recently I upgraded several access swicthes (2960, 3650's) which have POE and Cisco 7962 phones connected.  After the upgarde and subsequent reboot, the IP phones failed to power up and are effectively dead.
    All that happen on the phone now is that when the POE cable is connected, the phones mute button LED light flashes before the spekaer LED lights up and remains lite up.
    Approx 5 phones across multiple switches have died this way.
    Can anyone tell me if this is a behaviour they have experience and how they may have recovered from it.

    I am searching for a power adapter now.
    Yes - appears to be only 7962
    The Watts are displaying as 7.0 as opposed to the normal 6.3 and the Device ID is showing IEEE PD
    Version 12.2(55SE9)

  • Still I can not make a phone call after receiving ...

    I have got a reply from skype
    then I did what skype said
    but Still doesn't work
    please fix my problem!!!!!
    my order number was [removed for privacy]
    120mins landlines to call Korea!

    same here
    i had to do hard reset but don't restore settings from backup or it will be the same again

  • Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using VOIP. Everytime i make a phone call i have to type the number

    Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using MobileVOIP. Everytime i make a phone call i have to type the number.

    Go into your contacts and edit them.

  • Can't make phone calls after trying ti install 4181

    Last night I installed the latest os 4181. (via wifi)  it took forever. Got the BB logo for the longest time. I went to bed hopeing it would be done in the morning. Well, woke up and still see the logo. So i decided to hold the top button and reboot. It rebooted. All my apps and emails were there. But my text message icon was gone. I reboot again. Text message icon shows up but all my text messages are gone!!! I sent a text to myself and it works. I checked my software and it apparently didn't even upgrade to 4181! it's still os 10.1.0.2050 software release 10.1.0.2014. But I was glad that all my apps and emails were still there. Sad my texts were gone...but i live. Stupid me forgot to backup though. 
    I went out for the day. Didn't make any phone calls. Then i noticed i got a voicemail. I tried calling, but i got a message saying "Call Failure. Unable to connect your call Please try again." i tried dialing and it didn't work. WTF?!? I can't make any phone calls!! i tried to turn my network on and off (i'm with Telus) and still didn't work. 
    I got home and backed up everything. Thinking I'll try to download 4181 again, or maybe I should download my current os again. 
    Is anyone havening the same issues?!? I've read people lost their texts but they did have theirs upgraded to 4181. Mine didn't.
    Someone please help!!!

    I did a chat w Telus yesterday and he couldn't figure it out. 4181 did not install on my phone. Its still 2050. It says my network is Telus and I do get emails and texts (although I lost all my text messages). The Telus guy said my network is fine. He sent a ticket to a tech guy and someone is to get back to me. I jst can't wait so long. I need to make and receive calls. I asked him to send me the link to reinstall 2050 but he couldn't find it. I tried to download the 4181 again. Same problem. Stuck st the bb icon for hours. I rebooted by holding down the top button. It rebooted. It did not install 4181. Lost the texts I sent yesterday. And still cannot make or receive calls. I am sooooo frustrated!! Going to Telus store today.

  • TS4079 Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new numb

    Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
    I`ve tried restarting, rebooting, nothing works.
    The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile number

    Ecuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/.  . The more people that bring this to their attention the faster it will get fixed

  • I can't make a phone call from my iPad. But, I can receive phone calls. What am I doing wrong?i can reci

    I am able to receive phone calls on my iPad air 2. But, I can not make any phone calls. I am using an iPhone 6. I have set up both as required. What am I overlooking?

    Hi Bo S.,
    Welcome to the Apple Support Communities!
    I understand that you cannot make an outgoing call using your iPad. Included below are the instructions for using Continuity to make calls from your iPad. If you are set up correctly and still are unable to make a call after following the information in the article, please let me know at what point in the process the failure happens and what happens at that point. 
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Cheers,
    Joe

  • I RECEIVED AN ERROR MESSAGE THAT I COULD NOT MAKE OR RECEIVE CALLS AND I HAD TO RESTORE VIA ITUNES.  I HAVE DONE SO AND LOST LOADS OF APPS ETC (MY FAULT FOR NOTBACKING UP) BUT STILL UNABLE TO MAKE OR RECEIVE CALLS.

    Phone is only a few months old and was working fine last night - it ran out of battery but on being charged up this morning it was effectively locked.  I received an error message that I could not make or receive calls and I had to restore via itunes.  I have done so and lost loads of apps etc (my fault for not backing up) but still unable to make or receive calls.  Anyone had anything similar and can advise who I should contact or what I can do.
    Thanks,

    try contacting your carrier and see whats going on.

  • Verizon iPhone unable to make or receive calls

    Hello everyone, my Verizon iPhone is intermittently unable to make or receive calls (yes I do have reception). Has anyone experienced this before? I've called Verizon customer service and they were no help and suggested replacing the device at the apple store which I did. Verizon tech support ended up saying they would look into my issue with the network team, and contact me, which they never did. Apple sort of suggested it's a Verizon issue, and was not going to replace it for that reason, until I told them my battery was dieing quick too (luckily I had a screenshot of usage). So they're kinda blaming eachother- and I'm stuck in the middle with no support/help. I've tried ALL of the troubleshooting procedures. Do you think it's a Verizon or iPhone problem? What should I do?
    One reason I think it's a Verizon issue is, I've had 2 iPhones that had the same problem- what are the chances of that? One reason I believe it's a Apple iPhone issue is because ALL of the Verizon phones in my household work perfectly all the time, except mine. Again it's intermittent, which is why I recorded videos.
    Here is my brother's iPhone calling mine (both Verizon): http://www.youtube.com/watch?v=PWvZN90_adk
    My iPhone calling brother's: http://www.youtube.com/watch?v=9ZFS5iiNrus
    My iPhone calling a friends phone: http://www.youtube.com/watch?v=CGcB6uH0Ax8
    My friend calling my iPhone: http://www.youtube.com/watch?v=OCnJc4e_DAQ

    I have tried all the troubleshooting methods on the iPhone before this one multiple times by myself and with verizon tech support. Anyways, I gave it a try on this iPhone except the restore, because I want the apple genius to be able to run a diagnostic on it. I did the restore on my prior iPhone and he said he couldn't run the diagnostic because I restored it.
    My results from the troubleshooting link:
    1. Check Signal - I have 3/5 bars, still doesn't work
    2. Reset Network Settings - I did that, still doesn't work
    3. Verizon Update Preferred Roaming List - My iPhone gets "Call Failed" when dialing *228 (btw I already did this the day I got this iPhone).
    4. Check Carrier - 4 of the 5 Verizon phones in my house work perfectly, so I doubt it's a carrier issue at this point. But I will give Verizon another call tomorrow morning to make sure.

  • Can't make a phone call

    I keep getting an error that I can't make any phone calls on Samsung S5. I just missed an important call, and I can't call them back. Now they're closed. I'm furious. I have internet and text is slow but going through. I can't even call to get help on this issue. I saw a response to pm @ATTMobilityCares. How do I do this? How do I get help if I can't call? My truck is at the mechanic, and that's the call I just missed, so I don't even have transportation. Ughhhh!

    Hi there
    I’m sorry to hear you have been experiencing calling issues. I’d be happy to help! You can send us a private message by Clicking Here. Please include the following information:
    Full name
    Cell number
    Alternate contact number if available
    Full street address
    If unable to receive a call currently, I would recommend using our Live Chat option to speak with a representative for assistance. To begin a Live Chat, visit our Contact Us page.
    I hope this helps!
    Charise

Maybe you are looking for

  • Error while saving Excise Invoice

    Hi,    I am getting an error while saving an excise invoice. It is as follows :     BED :  Debit =  1,400.00  Credit =  392.00  Diff =1,008.00     Message no. 8I312 please help.... Thanks & Regards, S.Rajeswari

  • Cisco RV042 Firewall Blocking LAN Traffic

    Hello Everyone, I currently have an RV042G with a downstream SG-300 connected to one of the LAN interfaces.  Connected to the SG-300 are a couple servers running ESXi.  Intervlan routing is working fine on the current setup; however, I only able to c

  • Plz help me...to display in  matrix  form

    Hi sir.. i want to get this report in matrix form...plz i don't have any idea about matrix form... Right now iam getting like Below format:: emp_name cat_name     type_name      theme_name                levels_skilllevel rubin      FE MODELLING SKIL

  • Queries on pl/sql tables within a function

    hi, how can i execute regular sql-queries within a function on a pl/sql table which the function has recieved as a parameter ? i have tried quite a bit and always get type mismatches or internal errors. anybody has a good example on this ? thanks in

  • Creating new Infotype

    I created a new infotype 9015. It works and posts correctly.  Then I tried adding a module within the 9015 code to generate an infotype 0014. So the end result should be a 9015 and a 0014 record.   While Im in PA30 I can see the expected results but