SP19 Import Queue Error: domain used does not exist

Hi,
In order to import support package 19 (KB70019) I encountered following errors:
Field KEY: Component type or domain used not active or does not exist
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
Field KEY: Component type or domain used not active or does not exist
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
The missing component types are
/1PYXXFO/SAP_PAYSLIP_____K0001
/1PYXXFO/SAP_PAYSLIP_____K0020
I found out so far.
Can anyone tell me why they are missing?
M.

Hi
Check below SAP notes which is not exaclty related to your problem but can give you a brief idea how ot solve the problem:
Note 824421 - EEW: Nametab for table ZMDM_BPH9..._SCR cannot be generated
Note 306296 - No active nametab for <table> exists
You can take help of ABAP guys for this using above notes--
Hope it helps
Thanks
Sunny

Similar Messages

Error:domain database does not exist

Hi we are running Iplanet mssaging Server 5.2 p1 running in dirsync mode and iplanet directory server 5.1.We have configured th ldap settings of some of the users using the maildeliveryoption to mailbox and forward & we have set the mailforwarding attribute to forward the mail to a set of users.Now yesterday our smtp server panic & service stopped working.After removing the lock files in ../imta/tmp/ directory the service started working.But now for all the users for whom this forwarding of mails has been sent are getting there mails bounced.for other users for whom this option is not there the mail is getting delivered.The error recived is Illegal host / domain name.
I ran imsimta test -rewrite -debug for a user whose mail is getting bounced and i get the following output.here attaching some of the lines Can anyone please guide me as to what the problem is?(nslookup is working).
Does the imsimta cleandb might have corrupted the entries?
Regards and thanks in advance
Script started on Tue Nov 30 16:45:02 2004
# imsimta test -rewrite -debug
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
Address: [email protected]
*** Debug output from initializing MM for submission:
16:45:17.33: mmc_winit('l','[email protected]','[email protected]') called.
16:45:17.33: Queue area size 9236824, temp area size 3202696
16:45:17.33: 2309206 blocks of effective free queue space available; setting disk limit accordingly.
16:45:17.33: 1601348 blocks of free temporary space available; setting disk limit accordingly.
16:45:17.33: Rewriting: Mbox = "postmaster", host = "mail1.hathway.com", domain = "$*", literal = "", tag = ""
16:45:17.33: Rewrite: "$*", position 0, hash table -
16:45:17.33: Failed.
16:45:17.33: Rewrite: "$*", position 0, rewrite database -
16:45:17.33: (domain database does not exist)
16:45:17.33: Failed
16:45:17.33: Rewriting: Mbox = "postmaster", host = "mail1", domain = "mail1.hathway.com", literal = "", tag = ""
16:45:17.33: Rewrite: "mail1.hathway.com", position 0, hash table -
16:45:17.33: Found: "$U%[email protected]"
16:45:17.33: New mailbox: "postmaster".
16:45:17.33: New host: "mail1.hathway.com".
16:45:17.33: New route: "mail1.hathway.com".
16:45:17.34: New channel system: "mail1.hathway.com".
16:45:17.34: Looking up host "mail1.hathway.com".
16:45:17.34: - found on channel l
16:45:17.34: Routelocal flag set; scanning for % and !
16:45:17.34: Rewriting: Mbox = "postmaster", host = "mail1.hathway.com", domain = "$*", literal = "", tag = ""
16:45:17.34: Rewrite: "$*", position 0, hash table -
16:45:17.34: Failed.
16:45:17.34: Rewrite: "$*", position 0, rewrite database -
16:45:17.34: (domain database does not exist)
16:45:17.34: Failed
16:45:17.34: Rewriting: Mbox = "postmaster", host = "mail1", domain = "mail1.hathway.com", literal = "", tag = ""
16:45:17.34: Rewrite: "mail1.hathway.com", position 0, hash table -
16:45:17.34: Found: "$U%[email protected]"
16:45:17.34: New mailbox: "postmaster".
16:45:17.34: New host: "mail1.hathway.com".
16:45:17.34: New route: "mail1.hathway.com".
16:45:17.34: New channel system: "mail1.hathway.com".
16:45:17.34: Looking up host "mail1.hathway.com".
16:45:17.34: - found on channel l
16:45:17.34: Routelocal flag set; scanning for % and !
16:45:17.34: Mapped return address: [email protected]
*** Debug output from rewriting a forward header address:
16:45:17.34: Rewriting: Mbox = "systeam", host = "hathway.net", domain = "$*", literal = "", tag = ""
16:45:17.35: Rewrite: "$*", position 0, hash table -
16:45:17.35: Failed.
16:45:17.35: Rewrite: "$*", position 0, rewrite database -
16:45:17.35: (domain database does not exist)
16:45:17.35: Failed
16:45:17.35: Rewriting: Mbox = "systeam", host = "hathway", domain = "hathway.net", literal = "", tag = ""
16:45:17.35: Rewrite: "hathway.net", position 0, hash table -
16:45:17.35: Found: "$U%[email protected]"
16:45:17.35: New mailbox: "systeam".
16:45:17.35: New host: "hathway.net".
16:45:17.35: New route: "mail1.hathway.com".
16:45:17.35: New channel system: "mail1.hathway.com".
16:45:17.35: Looking up host "mail1.hathway.com".
16:45:17.35: - found on channel l
16:45:17.35: Routelocal flag set; scanning for % and !
16:45:17.35: Rewrite rules result: [email protected]
16:45:17.35: Applying reverse database to: [email protected]
16:45:17.35: No match -- no such entry.
forward channel = l
channel description =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NOGREY NORESTRICTED RETAINSECURITMULTIPARTS
channel flags #4 = EIGHTBIT NOHEADERTRIM NOHEADERREAD RULES
channel flags #5 =
channel flags #6 = LOCALUSER REPORTHEADER
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = hathway.com hathway.com
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = mail1.hathway.com
channel queue 0 name = LOCAL_POOL
channel queue 1 name = LOCAL_POOL
channel queue 2 name = LOCAL_POOL
channel queue 3 name = LOCAL_POOL
channel after params =
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x7
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = [email protected] (route (mail1.hathway.com,mail1.hathway.com)) (host hathway.net)
envelope From: address = [email protected]
name =
mbox = systeam
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
systeam.hathway.net@ims-ms-daemon
nasser.hathway.net@ims-ms-daemon
sayed.hathway.net@ims-ms-daemon
sameerm.hathway.net@ims-ms-daemon
daji.hathway.net@ims-ms-daemon
umanga.hathway.net@ims-ms-daemon
6 expansion total.
*** Debug output from submitting an envelope address:
16:45:17.37: mmc_wadr(0x0005ef70,'[email protected]','[email protected]') called.
16:45:17.37: Copy estimate before address addition is 1
16:45:17.37: Parsing address [email protected]
16:45:17.37: Rewriting: Mbox = "systeam", host = "hathway.net", domain = "$*", literal = "", tag = ""
16:45:17.37: Rewrite: "$*", position 0, hash table -
16:45:17.37: Failed.
16:45:17.37: Rewrite: "$*", position 0, rewrite database -
16:45:17.37: (domain database does not exist)
16:45:17.37: Failed
16:45:17.37: Rewriting: Mbox = "systeam", host = "hathway", domain = "hathway.net", literal = "", tag = ""
16:45:17.37: Rewrite: "hathway.net", position 0, hash table -
16:45:17.37: Found: "$U%[email protected]"
16:45:17.37: New mailbox: "systeam".
16:45:17.37: New host: "hathway.net".
16:45:17.37: New route: "mail1.hathway.com".
16:45:17.37: New channel system: "mail1.hathway.com".

Your first mistake. . .
Hi we are running Iplanet mssaging Server 5.2 p1 running in dirsync mode
please get off dirsync mode. There are bugs with dirsync that will never be fixed. 5.2p1 is well over a year old, and there're hundreds of fixed bugs there. 5.2p2 is available for free, on Sun's web site.
You still have some dirsync problems.

User Executes Stored Procedure That Executes sp_send_dbmail; receives email but also gets error Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.

Using SQL Server 2012 SP1
I have a user that is submitting a procedure that uses sp_send_dbmail. I have also noticed that they have the following code in their procedure
DECLARE @rc INT
IF NOT EXISTS (SELECT * FROM msdb.sys.service_queues
WHERE name = N'ExternalMailQueue' AND is_receive_enabled = 1)
EXEC @rc = msdb.dbo.sysmail_start_sp
The user submits the procedure and she gets the email but she also gets the following error message:
Msg 15151, Level 16, State 1, Procedure sysmail_start_sp, Line 8
Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.
Mail (Id: 2402) queued.
(1 row(s) affected)
I have granted execute to sp_send_dbmail and sysmail_start_sp. I have also granted select to service_queues.
Does anyone have any solutions for the above error message?
lcerni

The contents of sysmail_start_sp is this:
CREATE PROCEDURE sysmail_start_sp
AS
SET NOCOUNT ON
DECLARE @rc INT
   DECLARE @localmessage nvarchar(255)
ALTER QUEUE ExternalMailQueue WITH STATUS = ON
SELECT @rc = @@ERROR
IF(@rc = 0)
BEGIN
ALTER QUEUE ExternalMailQueue WITH ACTIVATION (STATUS = ON);
   SET @localmessage = FORMATMESSAGE(14639, SUSER_SNAME())
   exec msdb.dbo.sysmail_logmailevent_sp @event_type=1, @description=@localmessage
END
RETURN @rc
The user get the error, because she does not have any permission on the queue in question. To be able to alter the queue, the following applies according to Books Online:
Permission for altering a queue defaults to the owner of the queue, members of the db_ddladmin or db_owner fixed database roles, and members of the sysadmin fixed server role.
Note that is would be db_ddladmin or db_owner in msdb. Now, supposedly the queue is already active, and in that case I think that it is sufficient that the user has VIEW DEFINITION on the view. This would permit her to see the row in sys.service_queues,
why there would be no need to call sysmail_start_sp.
Altertanively, change the check to:
DECLARE @isenabled bit
SELECT @isenabled = (SELECT is_receive_enabled FROM msdb.sys.service_queues
               WHERE name = N'ExternalMailQueue')
IF @isenabled = 0
   EXEC @rc = msdb.dbo.sysmail_start_sp
The idea here is that, if the user has no permission to read the information in the DMV, @isenabled will be NULL, and you just pray and hope that the queue is up and running.
I suspect that the reason this worked for you on SQL 2005 is that on that instance someone at some point in made all the required configurations for it to work, but all that is forgotten now. That happens to me too.
If you really want the user to be able to start the queue, I have some better ideas than adding her to a role, but I skip the details for now.
Erland Sommarskog, SQL Server MVP, [email protected]

Name Error: The domain name does not exist

Hi,
I get this error when I try to create a view inside a web dynpro from se80 transaction
" Name Error: The domain name does not exist. "
Can anyone help me to solve this error ?
Thanks !!

Hi,
did you carry out the necessary <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">configuration</a> in your system? Note especially the need for fully qualified domain names (FQDN): <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm">FQDN</a>
Regards, Heidi

GRC 10 Role Import error(Master role does not exist) in SP12

Hi,
We have completed connectors part and ran sync jobs successfully.
We have given required inputs in Define Criteria,Select Role Data in Role Import.When we submit this,only few roles are successfully imported.
It is giving error like Master role does not exist(some roles) but it is successful for few other roles.
We have tried with SKIP option in role authorization source as per a note but it is not successful for all the role import and getting above mentioned error.
Please check and advice.
Thanks & Regards,
Koteswara Rao.

Hi Koteswara
Have you confirmed in SAP that your ZM* roles are definitely imparting roles only? When you tried to upload them on second attempt, did you relaunch the the role import screen to ensure any buffering completely cleared?
Another thing to try - import the master role and then exit NWBC and run the repository synch job. Go back to NWBC and attempt to import the derived roles to see if error is gone?
If these don't work for you it may be time to contact SAP. I assume it was the following note you referred to: 1576321 - Import derived role without master role
Also, this topic was raised in SCN last year (unfortunately the thread was not updated with the solution). Possibly reach to the thread owner and see if they will login to SCN and update it Role import failed with Master role does not exist in SP13
Regards
Colleen

The specified domain either does not exist or could not be contacted when logging in through RDP. Server 2012/SBS 2007

I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry T

Hi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Error: package jxl does not exist

I've tried everything on this thread from 2007
how to import a jxl package?
and I still get the error: package jxl does not exist.
I've:
1)added the the excelapi subdirectory that contains the jar file to the system class path, then I tried explicitly adding the jxl.jar file to the classpath (below)
c:\Program Files\Java\jdk1.7.0_02\bin\; c:\Program Files\Java\jexcelapi\jxl.jar;
2)I tried adding a copy of the jxl.jar file to the java\jdk1.7.0_02\bin\ subdirectory also.
Anyone have any other troubleshooting ideas?
Thanks,
Rob
Edited by: 915729 on Feb 20, 2012 11:35 AM

Neither of those is a very good idea.
You're also not telling how you're trying to compile the code.
If with javac, you should use the -cp switch to include the jxl library in the classpath.

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Transport Error: Source system does not exist. Message no. RSAR203

Hi,
after transporting from BI_DEVELOP to BI_TEST I get an error whil importing Datasources:
Source system ERP_DEVELOP_SOURCESYSTEM does not exist - Message no. RSAR203
Which is upon the first sight correct, because I got the followings systems, RFC's and BI Sourcesystem:
ERP_DEVELOP -> BI_DEVELOP with RFC & Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_DEVELOP
ERP_TEST -> BI_TEST with RFC & Sourcesystem ERP_TEST_SOURCESYSETM pointing to ERP_TEST
Can I map in the transport ( and how) in a way that the transports do not fail ?
ERP_DEVELOP_SOURCESYSTEM to ERP_TEST_SOURCESYSETM
or
Do I need to setup in BI_TEST a Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_TEST ?
Thank You
Martin
Edited by: Martin Sautter on Jul 25, 2011 12:59 PM

Hi Martin,
You have to maintain the transport connection between your ERP_DEVELOP and ERP_TEST
your transport path should be as below
BI_DEVELOP -
> BI_TEST
ERP_DEVELOP -
> ERP_TEST
1)Make sure you have FRC connection between BI_DEVELOP and ERP_DEVELOP, BI_TEST and ERP_TEST
2)check you have transport connection between BI_DEVELOP and BI_TEST,ERP_DEVELOP and ERP_TEST
Now you transports should not fail
Hope this helps
Regards,
Venkatesh

ERROR: ORA-01041: internal error. hostdef extension does not exist

Hi, I got the following error message when I tried to insert a row in table TBL_ORDER.
ERROR:
ORA-01041: internal error. hostdef extension does not exist
INSERT into TBL_ORDER
ERROR at line 1:
ORA-03113: end-of-file on communication channel
We have Oracle version 8.1.5.o.2 and Linux version 6.1.
Following are the tables, triggers, loadjava definition and source programs:
TBL_ORDER
1 ORDER_MEMBER_FIRM_ID VARCHAR2(4)
2 ORDER_CLIENT_ID VARCHAR2(4)
3 ORDER_BRANCH VARCHAR2(3)
4 ORDER_SEQUENCE VARCHAR2(4)
5 ORDER_EXCHANGE_ID VARCHAR2(3)
6 ORDER_EXCHANGE_SEQUENCE VARCHAR2(7)
7 ORDER_CREATE_DATE DATE
8 ORDER_TYPE VARCHAR2(2)
9 ORDER_STATUS VARCHAR2(1)
10 ORDER_SYMBOL VARCHAR2(5)
11 ORDER_SUFFIX VARCHAR2(14)
12 ORDER_SIDE VARCHAR2(5)
13 ORDER_PRICE VARCHAR2(20)
14 ORDER_STOP_PRICE VARCHAR2(20)
15 ORDER_PRICE_QUAL VARCHAR2(10)
16 ORDER_QUANTITY VARCHAR2(6)
17 ORDER_TIF VARCHAR2(4)
18 ORDER_AON VARCHAR2(4)
19 ORDER_DNR VARCHAR2(4)
20 ORDER_CASH_NEXT_DAY VARCHAR2(4)
21 ORDER_SELLER VARCHAR2(4)
22 ORDER_ACCOUNT_TYPE VARCHAR2(4)
23 ORDER_OS_TS VARCHAR2(4)
24 ORDER_BOOTH_ID VARCHAR2(4)
TBL_CMSOUT
1 CMSOUT_MEMBER_FIRM_ID VARCHAR2(4)
2 CMSOUT_CLIENT_ID VARCHAR2(4)
3 CMSOUT_DATA VARCHAR2(120)
trg_order.sql
create or replace procedure OrderToCmsoutProc(cms_member_firm_id VARCHAR2,
cms_client_id VARCHAR2,
cms_branch VARCHAR2,
cms_sequence VARCHAR2,
cms_side VARCHAR2,
cms_quantity VARCHAR2,
cms_symbol VARCHAR2,
cms_price VARCHAR2,
cms_tif VARCHAR2,
cms_type VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'OrderToCmsout.test(java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_order
after insert on TBL_ORDER
for each row
CALL OrderToCmsoutProc (:new.order_member_firm_id,
:new.order_client_id,
:new.order_branch,
:new.order_sequence,
:new.order_side,
:new.order_quantity,
:new.order_symbol,
:new.order_price,
:new.order_tif,
:new.order_type)
commit;
show errors;
exit;
trg_cmsout.sql
create or replace procedure PackCmsoutSidProc(pck_member_firm_id VARCHAR2,
pck_client_id VARCHAR2,
pck_data VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'PackCmsoutSid.test(java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_cmsout
after insert on TBL_CMSOUT
for each row
CALL PackCmsoutSidProc (:new.cmsout_member_firm_id,
:new.cmsout_client_id,
:new.cmsout_data)
commit;
show errors;
exit;
loadORDERjava
loadjava -r -f -o -user userid/pswd OrderToCmsout.java
loadCMSOUTjava
loadjava -r -f -o -user userid/pswd PackCmsoutSid.java
OrderToCmsout.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class OrderToCmsout {
public static void main(String args[]) {
try {
test (args[0],args[1],args[2],args[3],args[4],
args[5],args[6],args[7],args[8],args[9]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test ( String parm_member_firm_id,
String parm_client_id,
String parm_branch,
String parm_sequence,
String parm_side,
String parm_quantity,
String parm_symbol,
String parm_price,
String parm_tif,
String parm_type)
throws SQLException
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt2;
try {
stmt2= conn.prepareStatement
("INSERT INTO TBL_CMSOUT VALUES (?, ?, ?)");
String datastring = parm_member_firm_id + "\\~" +
parm_branch + " " +
parm_sequence + "\\~" + "\\~" +
parm_side + "\\~" +
parm_quantity + " " +
parm_symbol + " " +
parm_price + "\\~" +
parm_tif + " " +
parm_type + "\\~";
stmt2.setString(1, parm_member_firm_id);
stmt2.setString(2, parm_client_id);
stmt2.setString(3, datastring);
stmt2.executeUpdate();
stmt2.close();
return;
} //try
catch (Exception e) {
System.err.println(e);
} //catch
PackCmsoutSid.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class PackCmsoutSid {
public static void main(String args[]) {
try { test(args[0],args[1],args[2]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test( String parm_member_firm_id,
String parm_client_id,
String parm_data)
throws SQLException
try {
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt1 = conn.prepareStatement
("SELECT sid_session_id " +
"FROM tbl_sid " +
"WHERE sid_member_firm_id = ? and " +
"sid_client_id = ?");
stmt1.setString(1, parm_member_firm_id);
stmt1.setString(2, parm_client_id);
ResultSet rs1 = stmt1.executeQuery();
while (rs1.next ()) {
String session_id_found = rs1.getString
("sid_session_id");
CallableStatement pack_pipe = conn.prepareCall
("{call DBMS_PIPE.PACK_MESSAGE(?)}");
pack_pipe.setString(1, parm_data);
pack_pipe.execute();
CallableStatement send_pipe = conn.prepareCall
("{? = call DBMS_PIPE.SEND_MESSAGE(?)}");
send_pipe.registerOutParameter
(1, java.sql.Types.INTEGER);
send_pipe.setString (2, session_id_found);
send_pipe.execute();
} //while
stmt1.close();
conn.close();
} //try
catch (Exception e) {
System.err.println(e);
} //catch
} //test
} //PackCmsoutSid
Thanks in advance for your help
Vinicio

you should post this question on the Application Server forum.
--Olaf

Report painter execution error - KH014 "Report does not exist".

Hi All,
I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
Has anyone encountered similar problem? How was it resolved?
Thanks.
Prashant

Hi Mikko,
Thanks for your reply but your solution is not working.
Hi Stacy,
I can execute the report from t codes like FSI3 & FSI0 in development.
I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
Please let me know if this is wrong method or there is any other option to transport this report in Production.
Thanks & Regards,
Prashant

Post Goods Issue - error : Class type does not exist - Message no. VK662

Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-Sri

Sri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps.

Error: Requested resource does not exist with SAP WebAS..deployed an ear

hi,
i deployed an application using SDM gui deployement manger.   the application is built using struts,spring etc. I have also created a datasource with Oracel 9i succesfully and hav associated it with the application.
When i try to access the application using the struts based path i get an "<b>ERROR 404:- Error: Requested resource does not exist</b>". I also tried accessing the index.jsp page directly without struts paths but dont know why i get an error "<b>File [appContext/admin/index.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].</b>"
The same ear is working perfectly fine with IBM WSAD but not in SAP Web AS ?? is there any configuration issues that i need to address ?? Kindly help me ASAP !!
Regards,
Vaibhav

Hi,
The Required server log contents are as follows:-
#1.5#000CF1AFC124017A000000020000067000041B1D550F525C#1155712701853#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server#Plain###Runtime error in compiling of the JSP file <C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp> !
The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
     com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
Exception id: [000CF1AFC124017A000000000000067000041B1D550F4D94]#
#1.5#000CF1AFC124017A000000030000067000041B1D550F5C88#1155712701868#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/doculine#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error##Plain###Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:117)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.getClassName(JSPServlet.java:238)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.compileAndGetClassName(JSPServlet.java:429)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:169)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
     at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1001)
     at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:560)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:209)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
     com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.validate(JSPParser.java:243)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.initParser(JSPParser.java:348)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:105)
     ... 37 more
#1.5#000CF1AFC124017A000000050000067000041B1D550F5F94#1155712701868#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server/WebRequests#Plain###Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
Exception id: [000CF1AFC124017A000000030000067000041B1D550F5C88]#

SP19 Import Queue Error: domain used does not exist

Similar Messages

Maybe you are looking for