Error:domain database does not exist
Hi we are running Iplanet mssaging Server 5.2 p1 running in dirsync mode and iplanet directory server 5.1.We have configured th ldap settings of some of the users using the maildeliveryoption to mailbox and forward & we have set the mailforwarding attribute to forward the mail to a set of users.Now yesterday our smtp server panic & service stopped working.After removing the lock files in ../imta/tmp/ directory the service started working.But now for all the users for whom this forwarding of mails has been sent are getting there mails bounced.for other users for whom this option is not there the mail is getting delivered.The error recived is Illegal host / domain name.
I ran imsimta test -rewrite -debug for a user whose mail is getting bounced and i get the following output.here attaching some of the lines Can anyone please guide me as to what the problem is?(nslookup is working).
Does the imsimta cleandb might have corrupted the entries?
Regards and thanks in advance
Script started on Tue Nov 30 16:45:02 2004
# imsimta test -rewrite -debug
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
Address: [email protected]
*** Debug output from initializing MM for submission:
16:45:17.33: mmc_winit('l','[email protected]','[email protected]') called.
16:45:17.33: Queue area size 9236824, temp area size 3202696
16:45:17.33: 2309206 blocks of effective free queue space available; setting disk limit accordingly.
16:45:17.33: 1601348 blocks of free temporary space available; setting disk limit accordingly.
16:45:17.33: Rewriting: Mbox = "postmaster", host = "mail1.hathway.com", domain = "$*", literal = "", tag = ""
16:45:17.33: Rewrite: "$*", position 0, hash table -
16:45:17.33: Failed.
16:45:17.33: Rewrite: "$*", position 0, rewrite database -
16:45:17.33: (domain database does not exist)
16:45:17.33: Failed
16:45:17.33: Rewriting: Mbox = "postmaster", host = "mail1", domain = "mail1.hathway.com", literal = "", tag = ""
16:45:17.33: Rewrite: "mail1.hathway.com", position 0, hash table -
16:45:17.33: Found: "$U%[email protected]"
16:45:17.33: New mailbox: "postmaster".
16:45:17.33: New host: "mail1.hathway.com".
16:45:17.33: New route: "mail1.hathway.com".
16:45:17.34: New channel system: "mail1.hathway.com".
16:45:17.34: Looking up host "mail1.hathway.com".
16:45:17.34: - found on channel l
16:45:17.34: Routelocal flag set; scanning for % and !
16:45:17.34: Rewriting: Mbox = "postmaster", host = "mail1.hathway.com", domain = "$*", literal = "", tag = ""
16:45:17.34: Rewrite: "$*", position 0, hash table -
16:45:17.34: Failed.
16:45:17.34: Rewrite: "$*", position 0, rewrite database -
16:45:17.34: (domain database does not exist)
16:45:17.34: Failed
16:45:17.34: Rewriting: Mbox = "postmaster", host = "mail1", domain = "mail1.hathway.com", literal = "", tag = ""
16:45:17.34: Rewrite: "mail1.hathway.com", position 0, hash table -
16:45:17.34: Found: "$U%[email protected]"
16:45:17.34: New mailbox: "postmaster".
16:45:17.34: New host: "mail1.hathway.com".
16:45:17.34: New route: "mail1.hathway.com".
16:45:17.34: New channel system: "mail1.hathway.com".
16:45:17.34: Looking up host "mail1.hathway.com".
16:45:17.34: - found on channel l
16:45:17.34: Routelocal flag set; scanning for % and !
16:45:17.34: Mapped return address: [email protected]
*** Debug output from rewriting a forward header address:
16:45:17.34: Rewriting: Mbox = "systeam", host = "hathway.net", domain = "$*", literal = "", tag = ""
16:45:17.35: Rewrite: "$*", position 0, hash table -
16:45:17.35: Failed.
16:45:17.35: Rewrite: "$*", position 0, rewrite database -
16:45:17.35: (domain database does not exist)
16:45:17.35: Failed
16:45:17.35: Rewriting: Mbox = "systeam", host = "hathway", domain = "hathway.net", literal = "", tag = ""
16:45:17.35: Rewrite: "hathway.net", position 0, hash table -
16:45:17.35: Found: "$U%[email protected]"
16:45:17.35: New mailbox: "systeam".
16:45:17.35: New host: "hathway.net".
16:45:17.35: New route: "mail1.hathway.com".
16:45:17.35: New channel system: "mail1.hathway.com".
16:45:17.35: Looking up host "mail1.hathway.com".
16:45:17.35: - found on channel l
16:45:17.35: Routelocal flag set; scanning for % and !
16:45:17.35: Rewrite rules result: [email protected]
16:45:17.35: Applying reverse database to: [email protected]
16:45:17.35: No match -- no such entry.
forward channel = l
channel description =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NOGREY NORESTRICTED RETAINSECURITMULTIPARTS
channel flags #4 = EIGHTBIT NOHEADERTRIM NOHEADERREAD RULES
channel flags #5 =
channel flags #6 = LOCALUSER REPORTHEADER
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = hathway.com hathway.com
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = mail1.hathway.com
channel queue 0 name = LOCAL_POOL
channel queue 1 name = LOCAL_POOL
channel queue 2 name = LOCAL_POOL
channel queue 3 name = LOCAL_POOL
channel after params =
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x7
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = [email protected] (route (mail1.hathway.com,mail1.hathway.com)) (host hathway.net)
envelope From: address = [email protected]
name =
mbox = systeam
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
systeam.hathway.net@ims-ms-daemon
nasser.hathway.net@ims-ms-daemon
sayed.hathway.net@ims-ms-daemon
sameerm.hathway.net@ims-ms-daemon
daji.hathway.net@ims-ms-daemon
umanga.hathway.net@ims-ms-daemon
6 expansion total.
*** Debug output from submitting an envelope address:
16:45:17.37: mmc_wadr(0x0005ef70,'[email protected]','[email protected]') called.
16:45:17.37: Copy estimate before address addition is 1
16:45:17.37: Parsing address [email protected]
16:45:17.37: Rewriting: Mbox = "systeam", host = "hathway.net", domain = "$*", literal = "", tag = ""
16:45:17.37: Rewrite: "$*", position 0, hash table -
16:45:17.37: Failed.
16:45:17.37: Rewrite: "$*", position 0, rewrite database -
16:45:17.37: (domain database does not exist)
16:45:17.37: Failed
16:45:17.37: Rewriting: Mbox = "systeam", host = "hathway", domain = "hathway.net", literal = "", tag = ""
16:45:17.37: Rewrite: "hathway.net", position 0, hash table -
16:45:17.37: Found: "$U%[email protected]"
16:45:17.37: New mailbox: "systeam".
16:45:17.37: New host: "hathway.net".
16:45:17.37: New route: "mail1.hathway.com".
16:45:17.37: New channel system: "mail1.hathway.com".
Your first mistake. . .
Hi we are running Iplanet mssaging Server 5.2 p1 running in dirsync mode
please get off dirsync mode. There are bugs with dirsync that will never be fixed. 5.2p1 is well over a year old, and there're hundreds of fixed bugs there. 5.2p2 is available for free, on Sun's web site.
You still have some dirsync problems.
Similar Messages
-
Error 1065 database does not exist
while starting the concurrent manager service in windows 2003
im getting this error
solution plzerror 1065 database does not exist Check the CM log file and the Event Viewer for more details about the error.
-
SP19 Import Queue Error: domain used does not exist
Hi,
In order to import support package 19 (KB70019) I encountered following errors:
Field KEY: Component type or domain used not active or does not exist
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
Field KEY: Component type or domain used not active or does not exist
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
The missing component types are
/1PYXXFO/SAP_PAYSLIP_____K0001
/1PYXXFO/SAP_PAYSLIP_____K0020
I found out so far.
Can anyone tell me why they are missing?
M.Hi
Check below SAP notes which is not exaclty related to your problem but can give you a brief idea how ot solve the problem:
Note 824421 - EEW: Nametab for table ZMDM_BPH9..._SCR cannot be generated
Note 306296 - No active nametab for <table> exists
You can take help of ABAP guys for this using above notes--
Hope it helps
Thanks
Sunny -
Name Error: The domain name does not exist
Hi,
I get this error when I try to create a view inside a web dynpro from se80 transaction
" Name Error: The domain name does not exist. "
Can anyone help me to solve this error ?
Thanks !!Hi,
did you carry out the necessary <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">configuration</a> in your system? Note especially the need for fully qualified domain names (FQDN): <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm">FQDN</a>
Regards, Heidi -
Database does not exist in the specified path
Just bought a USB 6009 DAQ and for some reason I now keep getting this error: "Database does not exist in the specified path" in VI Logger 2.0.1 it was working. Can anyone help??
Jared,
It sounds like VI Logger somehow lost its association with its
database. Please open MAX and check out the "Historical
Data"->"Citadel 5 Universe" entry. Under "My Computer" in the
right-hand pane, you should have a database called "VI Logger Data". It
must be spelled, spaced, and capitalized the exact same way. If you do
not have this database (which I suspect you do not), right click on "My
Computer" and select "Create/Attach Database..." The default database
path (if you want to have access to your old data) is C:\Documents and
Settings\All Users\Application Data\National Instruments\VI Logger,
with the database name as "VI Logger Data". If you want to create a new
database, then specify a new path.
If "VI Logger Data" does appear, a possible fix is to detach and
reattach it. Right click on "VI Logger Data," select
"Detach/Delete...," and chose the "Detach" option. Finally, reattach
the database as described above.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments -
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:
Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun -
Sales Order Error Message 'Product does not exist in system'
Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
HannesSolved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us. -
I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry THi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki -
Hello,
I've been running the DMV 'sys.event_log', and have noticed that I am getting a lot of errors about connection issues to some of my SQL Azure databases saying "Database could not be opened. May be caused because database does not exist or lack of authentication
to open the database."
The event type column says: 'connection_failed' and the event_subtype_desc column says: 'failed_to_open_db' both are associated with the above error message.
I know that these databases are on-line as I have numerous people connected to them, all of whom are not experiencing any issues. My question is, is there a query that you can run on SQL Azure to try and find out a bit more information about the connection
attempts?
If this was a hosted SQL solution it would be much easier.
MarcusHello,
As for Windows Azure SQL Database, we can't access the error log file as On-premise SQL Server. Currently, it is only support troubleshooting the connection error with the following DMV. The SQL database connections events are collected and aggregated in
two catalog views that reside in the logical master database: sys.database_connection_stats and sys.event_log. We can use sys.event_log view to display the details if there is error occurs.
Just as the connection failed describe, it may ocurrs when user didnot has login permission when connect to the SQL Database. If so, please verify the user has logon permission.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Hi,
I have created a table as like below to hold pictures on the
database.
SQL> create table img_store
(iname varchar2(20), picture BLOB);
Using Oracle Portal-> Application-> create new 'FORM' based on
table, an "Upload Image Form" was created as a portlet.
The form allow to browse images which you want to upload into
database, but when i click on 'Insert' button after browsed the
image to store the image path to the column, an error message
displayed:
Error: Path ID does not exist. (WWC-50001)
Anyone can advice to me on this? Thanks.
Regards,
Sherlynhi chrigel,
i searched for the problem and found a few references to it in our bug database. i strongly suggest to open a TAR with support to analyze the problem. they will see if a patch is available for this problem or open a new bug.
thanks,
christian -
Error: Selected disk does not exist (21) Module-SRE-700
Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438 -
HTTP Error 404 :File does not exist
Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekharI have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file. -
Excise Invoice creation error -Billing document does not exists
Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
TruptiResolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti. -
Error "Item 000010 does not exist" while creating sales order in VA01
Dear All,
As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement.
Enhancement: V45A0003
Function Module: EXIT_SAPMV45A_003
INCLUDE: ZXVVAU05
Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
system will throw error message accordingly.
It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
But after the error message is displayed if we try to save the sales order again system throws a STOP message as a POPUP
saying "Item 000010 does not exist".
Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
Please let me know your valuable input on this.
Regards
Arindam
Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PMIt sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables. Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s). This may be resulting because your internal tables are now inconsistent.
Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
Edited by: Breakpoint on Mar 11, 2010 3:29 PM -
Short dump with error FORM "CLEAR_SPECIAL_TABLES" does not exist"
Hi All,
We are experiencing an issue in our development system. We have recently upgraded to ECC6 from ECC5. While executing FBL3N transaction, we are getting a dump with description Syntax error in program "RFEPOS00 ".
The following syntax error occurred in program "RFEPOS00 " in include "RFPOSFZ0 "
line 1072:
"FORM "CLEAR_SPECIAL_TABLES" does not exist"
I checked in our previous systems, the subroutine CLEAR_SPECIAL_TABLES exists with an empty body in include RFPOSFC1.
And it is created by DDIC.
As per the comments in the include RFPOSFC1, we tried to generate the program RFXPRA33. But it is giving same error FORM "CLEAR_SPECIAL_TABLES" does not exist" .
Any help to resolving this issue will be appreciatable.
Thanks in advance.
Edited by: Kumar.ktk on Jun 8, 2010 1:36 PMHi,
We just had this issue after an upgrade and the solution was to compare the coding with an unupgraded system,
there we found that this missing form exists in an include with this documentation:
Function LINE_ITEMS_SPECIAL_FIELDS
caller L0F14I01, AFTER_SAVE_T021S, tcode O7R3
In case of errors: Start RFXPRA33
FORM CLEAR_SPECIAL_TABLES.
ENDFORM.
After we executed program: RFXPRA33 all errors were resolved,
Hope this helps,
Mickey
Maybe you are looking for
-
Server 2008 Pinter install error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)
I downloaded the HP Universal printer driver for a LaserJet 4250dn network printer to our server running SERVER 2008 SP2. I dowloaded the zipped executable files for both the PCL5 and PCL6 drivers to the desktop and ran the EXE to unzip the files. Wh
-
Testcase: enums + operator overloads
Hallo all, we have detected that Forte C++ 5.3 shows up a different behavior with respect to operator overloading of enums. The example below works with Forte C++ 5.2 and g++, but not with Forte C++ 5.3. I would also like to know, which one comformin
-
HP Pavillion model # p6654y System Recovery
I purchased a HP Pavillion model # p6654y about one year ago. Recently, when my son was using the computer, the system became completely unresponsive. He uses gaming sites, so he may have caught a virus. I don't know. I ordered the recovery disks
-
Common localhost numbers that are good to be aware of (like localhost:631)?
I had a problem where I couldn't clear several print jobs and I found a solution whereby I logged in to http://localhost:631/ and I was able to delete the print jobs there. Are there other common localhost numbers that are good to know, especially wh
-
Sharing iPad2: how to protect my own data when others use it?
A single iPad2 is shared with others. How do we protect individual data when others use the iPad?