SP3 Upgrade fails to find Weblogic Server 6.1 installed
Hello,
I have just downloaded SP3 for WLS 6.1. The machine´s im trying to install it on
are a Sun box with solaris 8 and an intel box with redhat 7.2, the problem im encounting,
when i install the service pack, is that the installer fails to find my install of
weblogic 6.1 (on both machines its a default install /bea/wlserver6.1/). I have tried
several ways of installing it, and all so far have failed. Anyone else had this problem
Thanks
Bobby
Below is a snippet of the install .
Choose BEA Home Directory
1- /bea
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.1 not found
WebLogic Server Service Pack 3 Installation failed.
You do not seem to have WebLogic Server 6.1
installed for BEAHOME /bea.
Exiting the Service Pack 3 installer...:
I had the same problem , the solution I found was to edit the file registry.xml (in
the same directory as the license file).
In my case the installation files where copied from another installation and had
the wrong information in the registry.xml about paths and machine name
Regards
Ulf
"Bobby" <[email protected]> wrote:
>
Hello,
I have just downloaded SP3 for WLS 6.1. The machine´s im trying to install
it on
are a Sun box with solaris 8 and an intel box with redhat 7.2, the problem
im encounting,
when i install the service pack, is that the installer fails to find my
install of
weblogic 6.1 (on both machines its a default install /bea/wlserver6.1/).
I have tried
several ways of installing it, and all so far have failed. Anyone else had
this problem
Thanks
Bobby
Below is a snippet of the install .
Choose BEA Home Directory
1- /bea
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.1 not found
WebLogic Server Service Pack 3 Installation failed.
You do not seem to have WebLogic Server 6.1
installed for BEAHOME /bea.
Exiting the Service Pack 3 installer...:
Similar Messages
-
How to use wlappc on a build machine where weblogic server is not installed
All,
We have a build environment where Weblogic server is not installed. We are currently moving from WL8 to WL10 but because of the relative paths in the weblogic.jar for version 10 I cannot figure out what jars I need in order to use the compile utilities without actually having to have the entire WL10 Application server installed on my build machine.
In WL8 we just needed the Weblogic.jar, webservices.jar, and wlManagement.jar.
Now it seems we need wlfullclient.jar webservices.jar and the weblogic.jar and all the jars in the relative classpath for the weblogic.jar, which is a very long list.
Is this really so? Seems shortsighted on Bea's/Oracle's part if we now need to have a full installation of the application server just to use the compile utilities on our build machine.
Any help on what jars to include so as to use wlappc or wlcompile on a build machine where weblogic 10 server is not installed would be appreciated.
Todd FloraI no longer need help with this, as I have determined to load weblogic on our build machine.
-
How to find weblogic Server memory for particular user
In a weblogic server how can i get the information for each user approximately
it occupying "x" size of memory...is there any command..so that based on number
of users i can increse my memory and harddisk space.Hi,
Following sql will help you find the responsibilities associated with the users in oracle applications.
SELECT frt.RESPONSIBILITY_NAME, furg.end_date
FROM
fnd_user_resp_groups furg,
FND_RESPONSIBILITY fr,
fnd_responsibility_tl frt,
fnd_user fu
WHERE fu.user_name = ‘&&username’
AND fu.user_id = furg.user_id
AND furg.responsibility_id = fr.RESPONSIBILITY_ID
AND frt.responsibility_id = fr.RESPONSIBILITY_ID
ORDER BY 1
Cheers... -
Find Weblogic server is Enterprise or Standard Edition
Hi,
I need to find if the Weblogic server version in my windows server is standards or enterprise edition.
My weblogic version 10.3.6.0 which was configured earlier and now we have got the enterprise version lisence
Regards,
GauravHi,
There is only one WebLogic Server software download. Whether you need a WebLogic Server Enterprise Edition or a WebLogic Suite license depends on whether you use the premium components which are included in the WebLogic Server Enterprise Edition or WebLogic Suite licenses.
For WebLogic Server 11g, the packaging is as follows:
WebLogic Server Standard Edition:
includes WebLogic Server
Kodo Enterprise
TopLink and ADF
JDeveloper
Enterprise Pack for Eclipse
WebLogic Server Enterprise Edition:
includes WebLogic Server Standard Edition
+ Clustering
+Enterprise Manager Diagnostics Pack
WebLogic Suite:
includes WebLogic Server Enterprise Edition
+ Coherence EE
+ JRockit Real Time
+ Management Pack for Coherence
+ iAS EE (on WebLogic)
+ WL Operations Control
Thanks,
Sharmela -
Currently I am using JDeveloper 11.1.1.2.0 for my project, which comes with EclipseLink v1.2 pre-installed. However, my project requires to use latest EclipseLink version 2.0. I added EclipseLink 2.0 into Libraries and Classpath setting in project property. However, when I ran my app by using embedded WebLogic Server, my app is still using the old EclipseLink v1.2. I already tried to copy EclipseLink 2.0 jar file into DefaultDomain/lib directory and ear library directory. But embedded weblogic server still using old version from modules directory. Could anyone tell me how I could solve this issue. Thanks!
WebLogic comes pre-configured with TopLink's provided EclipseLink Library as a system module. You cannot upgrade this to 2.0 in a support fashion. The next release of WebLogic will include EclipseLink 2.0(.x).
If you want to test your application's use of EclipseLink 2.0 using JPA 1.0 application managed EntityManagers you can package the 2.0 library in your EAR and use the filtered classloader config setup in the weblogic-application.xml to ensure the packaged library is used instead of the system module.
Doug -
Where to find WebLogic Server credentials
Hi
I have installed Oracle WebLogic Server Version 10.3.1.0 and it is running fine.
I'd like to know where (in which DB table) can I find usernames and passwords in the DATABASE. On the tab Security Realms I can see that I have users listed.
Rrgds
Kobsweblogic stores the credentials in embedded ldap server
you can connect to it by following this article
http://weblogic-wonders.com/weblogic/2010/05/20/connecting-to-weblogic-server-embedded-ldap-using-ldap-browser/
-Faisal -
Exchange 2010 SP2 to SP3 upgrade fails on Client Access Role
Hello,
I have searched everywhere and cannot find any answer to my problem. We have 1 Exchange server with all 3 roles installed and during the upgrade from SP2 to SP3 the server fails during the Client Access Role with the following error:
Error:
The following error was generated when "$error.Clear();
Get-ClientAccessServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
" was run: "Invalid URI: The format of the URI could not be determined.".
Invalid URI: The format of the URI could not be determined.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp
here is more info from the ExchangeSetupLogs
[10/09/2014 09:26:07.0463] [1] Executing:
Get-ClientAccessServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
[10/09/2014 09:26:07.0463] [2] Active Directory session settings for 'Get-ClientAccessServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'ADROOT.DOMAIN.local', Preferred Global Catalog: 'ADROOT.DOMAIN.local', Preferred Domain Controllers:
'{ ADROOT.DOMAIN.local }'
[10/09/2014 09:26:07.0463] [2] Beginning processing Get-ClientAccessServer -Identity:'EXCH2010.DOMAIN.local'
[10/09/2014 09:26:07.0463] [2] Active Directory session settings for 'Add-ADPermission' are: View Entire Forest: 'True', Configuration Domain Controller: 'ADROOT.DOMAIN.local', Preferred Global Catalog: 'ADROOT.tioh.local', Preferred Domain Controllers: '{
ADROOT.DOMAIN.local }'
[10/09/2014 09:26:07.0463] [2] Beginning processing Add-AdPermission -User:'S-1-5-20' -ExtendedRights:'Exchange Web Services Token Serialization'
[10/09/2014 09:26:07.0479] [2] Searching objects "EXCH2010.DOMAIN.local" of type "Server" under the root "$null".
[10/09/2014 09:26:07.0479] [2] Previous operation run on domain controller 'ADROOT.DOMAIN.local'.
[10/09/2014 09:26:07.0479] [2] Previous operation run on domain controller 'ADROOT.DOMAIN.local'.
[10/09/2014 09:26:07.0479] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[10/09/2014 09:26:07.0510] [2] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Invalid URI: The format of the URI could not be determined.
[10/09/2014 09:26:07.0526] [2] [ERROR] Invalid URI: The format of the URI could not be determined.
The article it references doesn't exist and I cannot find anything related to this error searching the web.
Please help!
NJVHi NJv7300
Thank you for your question.
By your state, I know you get error when you use Get_ClientAccessServer. I think it caused by AutoDiscover, you can check it.
You can refer to the following link:http://www.shudnow.net/?s=autodiscoverserviceinternaluri
You can refer to the following steps:1.
1. Using LDP, locate the following container:
CN=<SERVERNAME>,CN=Autodiscover,CN=Protocols,CN=<SERVERNAME>,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=<ORGNAME>,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=<DOMAIN>,DC=<TLD>
2. Double-click the <SERVERNAME> under Autodiscover and look for the "serviceBindingInformation" value:serviceBindingInformation (2): AutoDiscover.Corp.HMSA.com;
https://honmail.corp.hmsa.com/autodiscover/autodiscover.xml;
serviceClassName: ms-Exchange-AutoDiscover-Service;The proper format for the Autodiscover URI is
https://serverfqdn/Autodiscover/Autodiscover.xml
3. Ran Set-ClientAccessServer -Identity HON10343 -AutodiscoverServiceInternalUri
https://honmail.corp.hmsa.com/autodiscover/autodiscover.xml
4. Ran Get-ClientAccessServer, but received an error after HON10343 was enumerated.
5. Next, did another Set-ClientAccessServer on HON10344.
6. Finally, ran Get-ClientAccessServer and enumerated all CAS servers in the org without error.
7. Tested opening EMC on both Exchange 2007 and 2010 and were able to successfully expand the Server Configuration for every role and enumerate all servers.
If any questions, please let me know.
Best Regard,
Jim Xu -
Upgrade from OAS to weblogic server - Oracle reports impact
Hi Team,
We have quite lot reports are created in oracle reports 10g and used in production environment. We have plan to upgrade systems and i would like to know the impact in reports which are created using oracle reports 10g.
Currently, we are using
Oracle Database 10g
Oracle reports 10g
OAS 10g
and we are planning to migrate to
Oracle Database 11g
OAS -- > Weblogic application server.
Will my existing reports work in weblogic application server without any change? OR Do i need to change the existing reports.
Could somebody help me on this.
Thanks,
iqbal.Let me tell you, brother, it can be a real headache, starting with the upgrade process.
For example, I've Got x86 Solaris running on an old Dell box. Created a Boot Environment for my existing setup.
Now I'm trying to clone the Boot Environment so that I can do the Live Upgrade. However I'm getting an error when I use the lucreate command.
"# ls
TT_DB data format.dat mnt proc usr
bin dev home net rmdisk var
boot devices kernel nsmail sbin vol
cdrom etc lib opt test.txt~ xfn
core export lost+found platform tmp
# lucreate -n "solenv2" -m /:/dev/dsk/c0d0s3:ufs
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
Comparing source boot environment <solenv1> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Searching /dev for possible boot environment filesystem devices
Template entry /:/dev/dsk/c0d0s3:ufs skipped.
luconfig: ERROR: Template filesystem definition failed for /, all devices are not applicable..
ERROR: Configuration of boot environment failed.
# lustatus
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
solenv1 yes yes yes no -
I presume I need to get a slice ready for the utility because the utility is not smart enough to really do any slicing itself.
Any ideas? -
Exchange 2010 SP3 upgrade fails at stopping services for Management tools station
Attempting to upgrade a Windows 7 SP1 64bit virtual machine from Exchange 2010 SP2 management tools to SP3 fails with the following error:
Summary: 11 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:15:19
Preparing Setup
Completed
Elapsed Time: 00:00:00
Stopping Services
Failed
Error:
The following error was generated when "$error.Clear();
& $RoleBinPath\ServiceControl.ps1 -Operation:DisableServices -Roles:($RoleRoles.Replace('Role','').Split(',')) -SetupScriptsDirectory:$RoleBinPath;
& $RoleBinPath\ServiceControl.ps1 Stop $RoleRoles.Replace('Role','').Split(',')
" was run: "Service 'NetBT' failed to reach status 'Stopped' on this server.".
Service 'NetBT' failed to reach status 'Stopped' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:15:19
Here is the powershell execute policy:
PS C:\> Get-ExecutionPolicy -list
Scope
ExecutionPolicy
MachinePolicy
Unrestricted
UserPolicy
Unrestricted
Process
Undefined
CurrentUser
RemoteSigned
LocalMachine
RemoteSignedHi Bad Dos,
Any updates?
You can also try to uninstall sp2 Management Tool first, then install SP3 directly.
Frank Wang
TechNet Community Support -
Exchange 2010 SP3 Upgrade Failed
Dear All,
I'm trying to upgrade Exchange 2010 on SP2 or 3 but I'm getting below error.
Setup encountered a problem while validating the state of Active Directory: An Active Directory error 0x51 occurred when trying to check the suitability of server 'Server.Domain.Com'. Error: 'Active directory response: The LDAP server is unavailable.'
I have 3 DCs
PDC 2003
ADC 2003
ADC 2008 R2, All FSMO Roles are on 2008 R2.
Exchange 2007 SP3 is in place with 1 Exchange 2010 box which is working fine.
Please help me in this regard.
Thanks in advance.Hi
Can you ping your DC from your exchange server? On exchange 2010 can you run the following from your EMS, what does the results give you?
Get-ADServerSettings | fl -
Fail running integrated webLogic Server 11g (11.1.1.4)
hi, i try to follow a tutorial in cue card for work with web services & when i try to test the web services there was incomplete deploying as shown below:
[01:26:23 AM] #### Deployment incomplete. ####
[01:26:23 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application WSDataControlApp due to error deploying to IntegratedWebLogicServer.
[Application WSDataControlApp stopped and undeployed from Server Instance IntegratedWebLogicServer]
<Logger> <error> ServletContainerAdapter manager not initialized correctly.
anybody can help me fix this problem?
Edited by: kay on 07-Aug-2011 10:58
Edited by: kay on 07-Aug-2011 10:58Hi,
Are you getting any error in wls_reports managed server log file, while the servers stops abruptly. Location of log files is $DOMAIN_HOME/servers/wls_reports/logs. Please check the latest .out,.log files. Please paste the same here.
Thanks,
Kishore -
Exchange2010 SP2 to SP3 upgrade fails
Received the following error when attempting to upgrade to SP3 from SP2. FYI- All pre-requisites checks passed and Schema Prep completed with no errors.
Error:
The following error was generated when "$error.Clear();
initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions
" was run: "The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxx,DC=xxx" container object's otherWellKnownObjects
attribute, refers to a group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=xxxxx,DC=xxx" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".".
The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxx,DC=xxx" container object's otherWellKnownObjects attribute, refers to a
group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=xxxxx,DC=xxx" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:00:23
Any help is greatly appreciated.
MikeHello,
From your description,
the problem is caused by wrong group type, so I agree with Martina’s suggestion to check your group type.
Hope it is helpful.
Thanks,
Amy -
HI
I want to upgrade a SQL 2008 R2 Express install to 2008 R2 Web Edition.
when I click view detailed report I get the below.
How do I fix this?Hello,
As per below link upgrade of SQL Server 2008 express to SQL server 2008 r2 web is not supported.So i guess this message.I have never tried upgrading unsupported edition so not too much sure about error message.But i am sure not meets requirement is because
of unsupported upgrade you are doing
http://technet.microsoft.com/en-us/library/ms143393(v=sql.105).aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Grid Control 11g Installation Unable to find Weblogic Server
Hi,
I am trying to install Grid Control 11g on Rhel 5.3. I already installed Weblogic . But when I give this location as middleware. Grid doesnt accept it.
This is the exact error: ORACLE_MIDDLEWARE_HOME_LOCATION: specified Oracle Middleware Home is not installed in this host.
I am giving /opt/oracle/Middleware in the Middleware home location screen.
[oracle@ Middleware]$ pwd
/opt/oracle/Middleware
[oracle@]$ ls -l
total 108
drwxr-xr-x 2 oracle dba 4096 Dec 15 22:45 logs
drwxr-xr-x 7 oracle dba 24576 Dec 15 22:45 modules
-rw-r--r-- 1 oracle dba 852 Dec 15 22:45 ocm.rsp
drwxr-xr-x 5 oracle dba 4096 Dec 15 22:50 patch_wls1032
-rw-r--r-- 1 oracle dba 56812 Dec 15 22:45 registry.dat
-rw-r--r-- 1 oracle dba 1718 Dec 15 22:45 registry.xml
drwxr-xr-x 8 oracle dba 4096 Dec 15 22:45 utils
drwxr-xr-x 7 oracle dba 4096 Dec 15 22:45 wlserver_10.3Did you install the correct version of WebLogic?
Check you HOSTS file for incorrect entries.
Eric -
Wher to find binaries/install weblogic server 10.3. 3 for hp-ux itanium
Hi,
Could somebody tell me where can iI find weblogic server 10.3.3 install bits for hp-ux 64 .
Any hp-ux guys?You may want to try http://edelivery.oracle.com/
Maybe you are looking for
-
PI 7.4 - SFTP Adapter - Logs successful - No File Written
All, We are on PI 7.4 Dual stack - Scenario: IDOC to FlatFile via Reciver SFTP adapter - FCC is done by XML2Plain adapter module. The receiver comm channel logs are looking good. Please see below. But we dont see any file on the SFTP server. Please n
-
I'm looking for a solution to a problem. I'd like to push video content out to some of my clients. The video needs to be dvd quality res. and have the fewest steps to getting it. I originally thought to put an Apple TV at each location, set it up to
-
Report painter: Financial statement debit credit indicator taken into account?
Hi, When I create a report with report painter (FGI0) It does not take into account the debit / credit indicator of the FS statement. Is this standard SAP or do I miss a setting? kr, Klundert
-
App Store updates: I sign in, my password is accepted, I click on update, and still get the error message that I need to sign in to the same account I already signed in at. What do I have to do to get my app updates?
-
If I have 3 family members sharing the same account, can we create sub accounts to seperate their log in and they have access to music already purchased?