SPA 122 stops working with both PHONE 1 and 2 lights flashing

Hi,
We have hundreds of units deployed and we start having complaints that the line isn't working anymore while the unit does register with our server. Any calls going to the ATA gets a USER_BUSY condition like if a line was offhook but that's not the case.
Anyone had this condition? I am running 1.3.1(003).
One common thing so far is the fact those users do faxing but we ruled out config since we enable T.38 on all of them regardless.
Since the unit registers, we can't rely on the REGISTRATION too much so would like a way to figure out if the unit is healthy or not.
Thanks,
Benoit

Please update to 1.3.2(014) and see if this resolves the issue.
http://software.cisco.com/download/release.html?mdfid=283998793&softwareid=282463187&release=1.3.2&relind=AVAILABLE&rellifecycle=&reltype=latest

Similar Messages

Messages stopped working with my phone number all of a sudden?

Hi
In the last few weeks since retruning from a trip to the UK the messages on my MacBookPro is not working/syncing with my phone numbers... has anyone else found this?
Im using OS X 10.8.3 and 6.1.3 on my iphone and previously I had two phone numbers working with messages. Now it will only work with my apple id and I cant seem to find a way to add / sync my numbers. Can anyone suggest any solutions?
Thanks!

Have you tried turning your phones off for a few minutes?
W computing devices, when they are acting funny, often turning them off for a few minutes & then back on again can fix a lot of things. Apparently when they are doing things, sometimes little bits of electronic garbage can be left behind that over time can cause things to act funny. Removing power from the device can clear those things out of memory.
Also try that w your mac, whether you are one who turns it off evey night, or one who never turns it off. & especially if you never or rarely turn it off, make it a point to do so every so often to clear out the electronic garbage, or whenever it acts strange, try that before more drastic steps.
On the Mac, under Preferences, accounts, Imessages & you can be reache for messages at & it has my iPhone # 1st w a check box that is not checked & it is not grayed out. Then below it has my AppleID email listed & it is grayed out, just like my phone # is grayed out on my phone.
Don't know if any of this would help. Today iMessages were having challenges for much of the day. I hadn't known a way to check system status but someone posted it elsewhere:
http://www.apple.com/support/systemstatus/
handy to know to be able to check if the system is having issues w anything to know whether it is the system or my own particular device having the issue.

ITunes sync stopped working with my iPhone 5 and Outlook on Windows 7. Error states in part "because the sync server failed to sync the iphone"

I have an iPhone 5 running iOS 7.1.2. I am using iTunes version 11.2.2.3 on Windows 7. After updating to the new version of iTunes I am currently using, the snyc between my Outlook calendar and phone stopped working. I get the error "iTunes could not sync the calendars to the phone xxxxx because the sync server failed to sync the iphone" I followed the instructions here - Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010 - to no avail, with the exception of not re-installing Outlook. Not an option on my corporate computer. When I run the Sync test, it says it passes -
Microsoft Windows 7 Enterprise Edition Service Pack 1 (Build 7601)
LENOVO 4384AJ9
iTunes 11.2.2.3
QuickTime 7.7.5
FairPlay 2.6.12
Apple Application Support 3.0.3
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number xxxxxxxxxxx
Current user is not an administrator.
The current local date and time is 2014-07-09 21:39:02.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.2.2.3 is currently running.
iTunesHelper 11.2.2.3 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Device Sync Tests ****
Sync tests completed successfully.
Any ideas?

Try this
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

Getting UConn 8.5 to work with both Exchange 2007 and 2010

According to the document below, I should be able to set up one Unified Messaging service to access mailboxes on both Exchange 2010 and Exchange 2007 servers. I setup my service to point to 2010 CAS servers and I can access 2010 mailboxes, but testing 2007 mailboxes comes up with an http 200 error. If I setup the CAS server as 2007, I can access 2007 mailboxes, but get an error on 2010 mailboxes. This will be a real pain if I can't do this with one service. I don't want to have to keep Unity Connection updated as users get moved from 2007 to 2010! Anyoe know how to do this?
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html#wp1198171

I got this to work! My Unified Messaging Service was originally setup to Specify an Exchange Server. That is where I had put the DNS name of the CAS server (and that DNS entry pointed to several CAS servers). I changed the Service to Search for Exchange Servers instead and used that same DNS name in the Active Directory DNS Domain Name. When I do the test of this service, it tells me it Failed to locate a Domain Controller via DNS, but that is just informational. It also says it successfully connected to the Exchange CAS server with the autodiscover.xml. Now my mailboxes on both Exchange 2007 and 2010 are able to receive voicemail messages with this one Service configured.

Tools Stop Working in Both CS 4 and CS 5/Intel and G5 Macs

All tools will stop working and we will be locked into the hand/move tool, I can use the keyboard (C, T, B, G etc) to select a different tool and the tool pallet will show that I now have a different tool selected but my cursor will still display only the hand icon. This happens with two different machines and two different versions of PS and two OS.
1st machine: MacPro Dual Quad, OS 10.6.3 CS5, 14GB of Ram
2nd machine: G5 Dual 2.5, OS 10.5.8 CS4, 8GB Ram

Dont use the Apple/Command Key.
The space bar alone will put you in a temporary zoom option. Zoom in do the clone. Press Space, zoom out and you are back in the clone/heal tool.
Incidentally if you get stuck in the previous state of not being able to get back to the clone tool. Tap the space bar (and only the space bar).

Can I work with both Versions 2 and 3 ?

I have a Powerbook laptop and G5 desktop (both pre- intel) running version 2 of LR.
I have ordered a new intel Mac and thinking of installing LR3 on it.
My Lightroom dbase and image files are on an external Hard Disc Drive, for mobility purposes.
I want to be able to work on all 3 computers with LR.
The way I see it I am stuck with version 2 or is there a way to use both?
As soon as I update my database to 3, Will it no longer work on 2 ?

It often makes more sense to read the license agreement yourself than assume others have and will accurately reflect it in their response.
I have attached a copy of the EULA and provided some extracts below. You'll note that continued use of the earlier version is permitted under certain circumstances.
Extracts from Lightroom 3 license
2. Software License. If you obtained the Software from Adobe or one of its authorized licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive license to use the Software in the manner and for the purposes described in the Documentation, as further set forth below. See Section 14 for specific provisions related to certain components.
2.1 General Use. You may install and use one copy of the Software on up to the Permitted Number of your compatible Computers; or
2.2 Server Deployment. You may install the Permitted Number of copies of the Software on the Permitted Number of Computer file server(s) within your Internal Network for the purpose of downloading and installing the Software on up to the Permitted Number of Computers within the same Internal Network; or
2.3 Server Use. You may install the Permitted Number of copies of the Software on the Permitted Number of Computer file server(s) within your Internal Network only for use of the Software initiated by an individual through commands, data or instructions (e.g., scripts) from a Computer within the same Internal Network. The total number of users (not the concurrent number of users) permitted to use the Software on such Computer file server(s) may not exceed the Permitted Number. No other network use is permitted, including, but not limited to use of the Software, either directly or through commands, data or instructions, (i) from or to a Computer not part of your Internal Network, (ii) for enabling Internet or web hosted services, (iii) by any user not licensed to use the Software under a valid license from Adobe, (iv) as a component of a system, workflow or service accessible by more than the Permitted Number of users, or (v) for operations not initiated by an individual user (e.g., high-volume automated server processing of wire feed content); and
2.4 Portable or Home Computer Use. The primary user of the Computer on which the Software is installed may install a second copy of the Software for his or her exclusive use on either a portable Computer or a Computer located at his or her home, provided the Software on the portable or home Computer is not used at the same time as the Software on the primary Computer.
2.5 Backup Copy. You may make a reasonable number of backup copies of the Software, provided your backup copies are not installed or used for other than archival purposes.
The policy for upgrades is
5 . Updates. If the Software is an upgrade or update to a previous version of Adobe software, you must possess a valid license to such previous version in order to use such upgrade or update. After you install such update or upgrade, you may continue to use any such previous version in accordance with its end-user license agreement only if (a) the upgrade or update and all previous versions are installed on the same device, (b) the previous versions or copies thereof are not transferred to another party or device unless all copies of the update or upgrade are also transferred to such party or device and (c) you acknowledge that any obligation Adobe may have to support the previous version(s) may be ended upon the availability of the upgrade or update. No other use of the previous version(s) is permitted after installation of an update or upgrade.Upgrades and updates may be licensed to you by Adobe with additional or different terms.
"Computer" means a computer device that accepts information in digital or similar form and manipulates it for a specific result based on a sequence of instructions.
"Internal Network" means a private, proprietary network resource accessible only by employees and individual contractors (i.e., temporary employees) of a specific corporation or similar business entity. Internal Network does not include the Internet or any other network community open to the public, such as membership or subscription driven groups, associations and similar organizations.
"Permitted Number" means one (1) unless otherwise indicated under a valid license (e.g., volume license) granted by Adobe.
Full License is appended below

Video not working with both 6.21 and 6.22 versions

Hello All,
I am having problem with my Skype video call. When I try to call, instead of video, the attached image is shown! Does anyone have similar problem?? How can I solve this!
Thanks in advance!.
Solved!
Go to Solution.
Attachments:
skype.PNG ‏47 KB

Camera plus is not a webcam, it's virtual camera software. That actual image is generated by that software, not skype. You should have another option to select a real webcam. If that still doesn't work, provide a DirectX diagnostic log and any other further details when you select a webcam that is not "Camera plus".
Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.
(i.e. compress DxDiag.txt ---> DxDiag.zip)

All email links have stopped working from both Windows Mail and Thunderbird. It is probably caused by a recent update to Firefox. How can I sort this?

It was OK until a few days ago but now no links work in either Thunderbird or Windows Mail. I have changed nothing so I can only assume that this is another case of an update changing things without my knowledge.
Links within web pages still work. Firefox is the default browser and we have been using Windows Mail and Thunderbird (gmail and googlemail) for at least a couple of years on this computer.

Open your firewall program. First check the settings. Make sure that the
program is set to tell you if a new program wants access to the web. Then
go to the list of programs the firewall has. Make sure that all the programs
you want to access the web are set to '''ALLOW'''. If it is set to '''AUTO''', the
firewall may not allow access.
This problem occurs when your Internet security program was set to trust the
previous version of Firefox, but no longer recognizes your updated version as
trusted. Now how to fix the problem: To allow Firefox to connect to the Internet
again:<BR><BR>
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)<BR><BR>
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.

After new update 6.0.1 MMS stoped to work on both phones 4 and 3GS, Apple fix your problem please

Hy Apple and others,
After new update 6.0.1 I cannot send pictures or contacts via simple messages as I could before. The same problem has my girlfriend by using 3GS iPhone.
Reseting iOS and other methods are useless.
I know that the problem is because of this update and I am waiting apple to do something with it.

Leave out the ranting and simply state what issue you are having.
Your wall of text is hard to read.

Front row doesn't work with both apple+esc and remote

My new macbook can't open front row, not with the remote, and with apple+esc, could it be a file that i have to delete and then restart the computer and that that file automatic comes back??

If, for whatever reason, Front Row isn't in that location, you'll have to re-install it. This shouldn't be a big deal except I'd be a little curious to know why it disappeared...
Insert your original Mac OS X install disk that came with your Mac. You do not need to startup from the disk. Double-click on the "Install Bundled Software Only" option on the disk. At the "Installation Type" window of this installer, click the "Customize" button. This will give you a list of software to check on or check off. Check on the option for Front Row but uncheck everything else (unless there's something else missing that you need!). Run the installer and this should put Front Row back in its proper location. Depending on which version gets installed, you may wan to run the Software Update to make sure Front Row is up-to-date.
-Doug

IMessage not working with my phone number.

Okay, so I lost my phone and i deleted everything on it via findmyiphone because i didn't have a password, well i recovered it and restored it from my last backup, my iMessage stopped working with my phone number and only works with my email. I've tried turning off and on imessage, shutting it off and on again, even resetting it, still nothing. any ideas on how to help?

Hello Jonahfromnm,
You may need to unlink, then relink your phone number with your Apple ID.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
Allen

Macbook stopped working with certain display

My macbook randomly stopped recognizing with my external display (Niko 19"). The computer does not see the monitor or the monitor does not see the computer even when i tell it to detect displays. The weird part is that it still works with all other displays. My monitor also works with all other laptops I have tried with it (PC, macbooks, and macbook pros). I have tried with different cables/dvi-mini dvi adapters and same situation with all. When it stopped working was when i had my laptop unhooked for a weekend (traveling) the monitor was not touched while i was away which leads me to think software on my laptop. However it would not make sense for it to be a driver because it just stopped working with one certain monitor and not all. Does anybody have any idea what it could be?
Carson

It's not impossible that corruption in the driver would be confined to one display and not affect others. You could try throwing away the related plist files. In /Library/Preferences there should be a file com.apple.windowserver.plist that can be trashed. Also, for your home account in /Users/accountname/Library/Preferences/ByHost should be com.apple.windowserver.xxxxxxxx.plist where xxxxxx is a string of letters and numbers and accountname is the name on the primary account. Throw that file away, too. Then restart.
When OS X restarts and finds those files missing from their expected location, it will generate fresh copies with factory default values. Hopefully that will clear up the issue with the Niko monitor not being properly recognized.

Lync Server 2010 conference not working with Windows 8.1 and IE 10

Hello,
The problem is that whenever a Windows 8.1 user tries to join a Lync server 2010 conference using Internet Explorer 10 (or 11, tried that too) the user can't join the conference. If the conference is created by a Lync server 2013 user joining works fine.
When using Lync 2010 client we get the following error in the client: "error id 87 source id 7".
When using Lync 2013 client we end up with a blank conversation window.
There are no traces in server log, client log or event log.
Below is a set of use cases that may help you to understand what is the problem scenario. Each of these works or does not work with both Lync 2010 and Lync 2013 client.
- Lync server 2010 conference, windows 7, Chrome, Firefox, IE 10 or 11 --> Works.
- Lync server 2010 conference, windows 8.1, IE 10 or 11 --> Does not work.
- Lync server 2010 conference, windows 8.1, Chrome or Firefox --> Works.
- Lync server 2013 conference, windows 8.1, Chrome, Firefox, IE 10 or 11 --> Works.
It does not help to add the meet address to IE compatibility list (Compatibility View Settings).
If i press F12 in IE and change the document mode of the meet page to IE 9 version then i can join meetings with Windows 8.1 and IE 10. Unfortunately i cannot make that as a default setting for the meet website.
Any ideas on how to get Lync server 2010 meetings working with Windows 8.1 and IE 10 or 11?
IE is the company default browser. Windows 8.1 is not a default operating system but we have increasing number of Windows 8.1 computers in our environment (mainly directors).

According to your description, it is hard to tell whether the issue is related with IE or Lync Server 2010 or both.
Compare the log when Lync client on Window 8.1 with IE 10 or IE 11 join Lync server 2010 conferencing and Lync Server 2013 conferencing.
Lisa Zheng
TechNet Community Support

My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

Yes... to no avail

My i phone 5 has stopped working on both my car stereos

hello all my i phone 5 has just stopped working in both my car stereos. it still charges but won't play. on one i get "error 19" and the other "not supported" they both where working on the 31/12/12 but not now ?? any one any idea why ???

has there been an update of software(iso) over the last few days ???

SPA 122 stops working with both PHONE 1 and 2 lights flashing

Similar Messages

Maybe you are looking for