Spa8000 - Feature dial service codes are never sent

Hallo
I have an Spa 8000 which I am trying to configure. Calls and all other features are working ok, I'm just having trouble with those feature codes that require additional digits.
For example, unblock caller id (CID) for one call. The Vertical Service Activation Code for Block CID Per Call Deact Code is empty. The Feature Dial Services Codes contains *82. When I dial *82 from the device I get the secondary dial tone waiting for more digits. No matter what number I enter (eg, 10 digit number, 4 digit then #) the call is rejected with a busy signal. A wireshark trace shows that no traffic ever leaves the device.
Does anyone know what's causing this? When I dial *81 I see the *81 get sent to my proxy. When I dial *825555555555 (or a valid number) I get a busy signal no INVITE is sent. I also get the same behaviour with *67 and *72.
Thanks for your help,
Gareth

ok, granted that you want it to be handled by your SIP provider, just want to know if it works if the code is in the Vertical Service Code
this could be a possible problem between the provider and the device...unfortunately i've never really tried your set-up (i usually just let the device handle it) and i have no SPA8000 to test the configuration with
| isolate! isolate! isolate! |

Similar Messages

I claim my OS X Mountain Lion but they never sent me the code

I bought my macbook pro in july 7th in the new york 5th avenue store and i claimed my mountain lion copy yesterday around mid day but they never sent me my code also when I was applying for the upgrade the webpage didn't ask me to scan my receipt or nothing, I have my claim number but what can i do with it?
If someone is having the same problem? Can anyone tell what i should do?

Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

How do I change the phone number attached to my Icloud? All the codes and stuff are being sent to my old number.

How do I change the phone number attached to my Icloud? All the codes and stuff are being sent to my old number.

Hello Babyygrl23,
Welcome to the Apple Support Communities!
It sounds like your iCloud Apple ID has a phone number associated with it that you would like to update. If this is the case, after signing in to the linked website below, you will see a section on the left side of the screen labeled Phone Numbers. You can edit the phone number associated with that account from there.
Apple - My Apple ID
Cheers,
Joe

On a 3750 enhanced services port, are hierarchical queueing and standard queuing features mutually exclusive?

When you configure hierarchical queueing on an enhanced services port, should one also configure the egress queue chararcteristics such as buffer space and thresholds, shaped/shared weights, egress priority queue, etc., that is all of those characteristics that one would configure if one were configuring a port for standard QOS. In other words, on an enhanced services port, are the hierarchical queueing features using the modular QOS CLI and the standard egress queueing features supposed to be used together or are they mutually exclusive?

Hi Christine,
Answer to your confusion is in the following document.
http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/release/12.1_14_ax/release/notes/OL464603.html#wp58682
On an ES port, you can use LLQ (enabled with the priority policy-map class configuration command) and the egress priority queue (enabled with the priority-queue out
interface configuration command). By using these two features, you can
give priority to a class of traffic and avoid losing traffic when the
switch is congested. In previous releases (before the egress priority
queue was supported), you could put a traffic class into the
strict-priority queue, but congestion at the egress queue-sets could
result in the dropping of that priority traffic. The priority-queue out
interface configuration command enables you to prioritize the same
traffic class at the egress queue-sets, ensuring that priority traffic
reaches the hierarchical queues and is processed with priority.
you can also fine tune the Queue-sets for your desired results.
http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/release/12.2_50_se/configuration/guide/swqos.html#wp1162303

Error in PPMOD feature while assigning functional area under company code.

Hi Experts,
I am getting error in PPMOD feature while assigning functional area under company code.
The error is " The total fields lengths of the decision operations are too great ".
Please advice.
Regards,
IFF

Hi IFF,
The return values which you have maintained for the decision parameter are not acceptable that's why it's throwing that error.
Your PPMOD feature is based on company code and functional area.
Try to maintain it as follows:
000010                                  D     BUKRS
000020     1000           D     FKBER
000030     1000 0001                 &PPMOD=1,
000040     1000 ****                 &PPMOD=2,
000050     2000                 &PPMOD=1,
000060     2100                 &PPMOD=2,
000070     2900                 &PPMOD=2,
000080     2910                 &PPMOD=1,
000090     ****                 &PPMOD=2,
Please try to create this features value again using tree format, so that you can know the actual length of the return string and update the thread once done.
Edited by: pdk_hcm on Sep 6, 2011 2:30 PM

Emails in sent box appear to have been sent, but are never received

I have an intermittent problem which is causing me no end of trouble for my business. Since about November last year, it seems that a certain percentage of my iCloud emails are never delivered to the recipient. There is nothing to identify failed messages -- they appear in my Sent box normally and as far as I can tell have been delivered normally. Some of them have been "new" messages, starting a new thread (which I suppose may possibly be trapped by someone's spam filter) but the majority are replies to another email, which I think are very unlikely to have been filtered as spam. I believe the people telling me that my emails have simply never arrived in their inbox at all. Messages with attachments and without attachments both fail. I am using the standard Apple mail client on my iMac.
This only happens with my Apple email account -- although to be fair I send much more email through that account so it is not necessarily a fair comparison. It is nothing to do with Apple filters for obscenity -- there is nothing at all objectionable in the emails that appear to be failing. Most of them are very standard business communications.
Has anyone found a solution to this problem? I wonder if I need to BCC myself on every message to see that it has come through (and even then, would that prove that all recipients received the message?)
Many thanks to anyone who can help

Hi there vladc,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
-Griff W.

Does anyone know how to contact a responsible, responsive customer service rep? Promises of resolution to my billing issues are never kept. Return calls are never made. I contacted Executive Relations and emailed 3 Verizon executives. No reponse. Any

Does anyone know how to contact a responsible, responsive customer service rep? Promises of resolution to my billing issues are never kept. Return calls are never made. I contacted Executive Relations and emailed 3 Verizon executives. No reponse. Any number, email or help contacting a reponsive person is appreciated! Thanks!

http://www.BBB.org
File a complaint they will call you.
Good Luck

Hi, all transactions codes are saved in which table?some transaction codes?

hi,
all transactions codes are saved in which table?i want some transaction codes?

All transaction codes are stored in table TSTC. Their texts are displayed in TSTCT.
Here are some T-CODE's..
OSS1      SAP Online Service System
OY19      Compare Tables
S001      ABAP Development Workbench
S002      System Administration.
SA38      Execute a program.
SCAT      Computer Aided Test Tool
SCU0      Compare Tables
SE01      Old Transport & Corrections screen
SE09      Workbench Organizer
SE10      Customizing Organizer
SE10      Customizing organizer requests for user (To release for transport enter user name, press Enter. Select changed object and select ReleaseSE10 New Transport & Correction screen
SE11      ABAP/4 Dictionary Maintenance SE12 ABAP/4 Dictionary Display SE13 Maintain Technical Settings (Tables)
SE11      ABAP/4 Dictionary.
SE12      Dictionary: Initial Screen enter object name
SE13      Access tables in ABAP/4 Dictionary.
SE14      ABAP/4 Dictionary: Database Utility.
SE14      Utilities for Dictionary Tables
SE15      ABAP/4 Repository Information System
SE15      ABAP/4 Repository Information System.
SE16      Data Browser
SE16      Data Browser: Initial Screen.
SE16      Display table contents
SE17      General Table Display
SE30      ABAP/4 Runtime Analysis
SE30      ABAP/4 Runtime Analysis: Initial Screen.
SE30      Run Time Analysis (press Tips and Tricks button for good stuff)
SE32      ABAP/4 Text Element Maintenance
SE35      ABAP/4 Dialog Modules
SE36      ABAP/4: Logical Databases
SE37      ABAP/4 Function Library.
SE37      ABAP/4 Function Modules
SE38      ABAP Editor
SE38      ABAP/4 Editor.
SE38      ABAP/4 Program Development
SE39      Splitscreen Editor: Program Compare
SE41      Menu Painter
SE43      Maintain Area Menu
SE51      Screen Painter
SE51      Screen Painter: Initial Screen.
SE54      Generate View Maintenance Module
SE61      R/3 Documentation
SE62      Industry utilities
SE63      Translate Short/Long Text.
SE63      Translation
SE64      Terminology
SE65      R/3 documents. Short text statistics SE66 R/3 Documentation Statistics (Test!)
SE68      Translation Administration
SE71      SAPscript layout set
SE71      SAPscript Layouts Create/Change
SE72      SAPscript styles
SE73      SAPscript font maintenance (revised)
SE74      SAPscript format conversion
SE75      SAPscript Settings
SE76      SAPscript Translation Layout Sets
SE77      SAPscript Translation Styles
SE80      ABAP/4 Development Workbench
SE80      Repository Browser: Initial Screen.
SE81      SAP Application Hierarchy
SE82      Customer Application Hierarchy
SE84      ABAP/4 Repository Information System
SE85      ABAP/4 Dictionary Information System
SE86      ABAP/4 Repository Information System
SE87      Data Modeler Information System
SE88      Development Coordination Info System
SE91      Maintain Messages
SE92      Maintain system log messages
SE93      Maintain Transaction Codes
SE93      Maintain Transaction.
SEU      Object Browser
SHD0      Transaction variant maintenance
SM04      Overview of Users (cancel/delete sessions)
SM04      Overview of Users.
SM12      Deletion of lock entries (in the event you have you are locked out).
SM12      Lock table entries (unlock locked tables)
SM21      View the system log, very useful when you get a short dump. Provides much more info than short dump
SM30      Maintain Table Views.
SM31      Table Maintenance
SM32      Table maintenance
SM35      View Batch Input Sessions
SM37      View background jobs
SM50      Process Overview.
SM51      Delete jobs from system (BDC)
SM62      Display/Maintain events in SAP, also use function BP_EVENT_RAISE
SMEN      Display the menu path to get to a transaction
SMOD/CMOD      Transactions for processing/editing/activating new customer enhancements.
SNRO      Object browser for number range maintenance.
SPRO      Start SAP IMG (Implementation Guide).
SQ00      ABAP/4 Query: Start Queries
SQ01      ABAP/4 Query: Maintain Queries
SQ02      ABAP/4 Query: Maintain Funct. Areas
SQ03      ABAP/4 Query: Maintain User Groups
SQ07      ABAP/4 Query: Language Comparison
ST05      Trace SQL Database Requests.
SU53      Display Authorization Values for User.
Human Resources
PA03      Change Payroll control record
PA20      Display PA Infotypes
PA30      Create/Change PA Infotypes
PP02      Quick Entry for PD object creation
PU00      Delete PA infotypes for an employee. Will not be able to delete an infotype if there is cluster data assigned to the employee.
Sales and Distribution (SD)
OLSD      Config for SD. Use Tools-Data Transfer-Conditions to setup SAP supplied BDC to load pricing data
VA01      Create Sales/Returns Order Initial Screen
VB21      Transaction for Volume Lease Purchases (done as a sales deal)
VK15      Transaction used to enter multiple sales conditions (most will be entered here)
VL02      Deliveries
SAP Office
SO00      send a note through SAP, can be sent to Internet, X400, etc
Financial Accounting (FI)
FGRP      Report Writer screen
FM12      View blocked documents by user
FST2      Insert language specific name for G/L account.
FST3      Display G/L account name.
KEA0      Maintain operating concern.
KEKE      Activate CO-PA.
KEKK      Assign operating concern.
KL04      Delete activity type.
KS04      Delete a cost centre.
KSH2      Change cost centre group delete.
OBR2      Deletion program for customers, vendors, G/L accounts.
OKC5      Cost element/cost element group deletion.
OKE1      Delete transaction data.
OKE2      Delete a profit centre.
OKI1      Determine Activity Number: Activity Types (Assignment of material number/service to activity type)
OMZ1      Definition of partner roles.
OMZ2      Language dependent key reassignment for partner roles.
Material Management (MM)
MM06      Flag material for deletion.
OLMS      materials management configuration menu, most of the stuff under this menu is not under the implementation guide
MM configuration transactions
OLMB      Inventory management/Physical Inventory
OLMD      MM Consumption-Based Planning
OLME      MM Purchasing
OLML      Warehouse Management
OLMR      Invoice Verification
OLMS      Material Master data
OLMW      MM Valuation/Account Assignment
Configuration related
OLE      OLE demo transaction
OLI0      C Plant Maintenance Master Data
OLI1      Set Up INVCO for Material Movements
OLI8      Set Up SIS for Deliveries
OLIA      C Maintenance Processing
OLIP      C Plant Maintenance Planning
OLIQ      New set-up of QM info system
OLIX      Set Up Copying/Deleting of Versions
OLIY      Set Up Deletion of SIS/Inter.Storage
OLIZ      Stat Set Up INVCO: Invoice Verify
OLM2      Customizing: Volume-Based Rebates
OLMB      C RM-MAT Inventory Management Menu
OLMD      C RM-MAT MRP Menu
OLME      C MM Menu: Purchasing
OLML      C MM Menu for Warehouse Management
OLMR      C RM-MAT Menu: Invoice Verification
OLMS      C RM-MAT Master Data Menu
OLMW      C RM-MAT Valuation/Acct. Asset. Menu
OLPA      SOP Configuration
OLPE      Sales order value
OLPF      SPRO Start SAP IMG (Implementation Guide).
OLPK      Customizing for capacity planning
OLPR      Project System Options
OLPS      Customizing Basic Data
OLPV      Customizing: Std. Value Calculation
OLQB      C QM QM in Procurement
OLQI      Analysis OLVD C SD Shipping Menu
OLVF      C SD Billing Menu
OLQM      Customizing QM Quality Notifications
OLQS      C QM Menu Basic Data
OLQW      C QM Inspection Management
OLQZ      Quality Certificates
OLS1      Customizing for Rebates
OLSD      Customizing: SD
OLVA      C SD Sales Menu
OLVS      C SD Menu for Master Data
Regards,
Pavan

[svn] 2716: SDK-15848 - Conditional compilation constants defined in flex-config. xml are never used if a single constant is specified on the command line

Revision: 2716
Author: [email protected]
Date: 2008-08-04 01:18:12 -0700 (Mon, 04 Aug 2008)
Log Message:
SDK-15848 - Conditional compilation constants defined in flex-config.xml are never used if a single constant is specified on the command line
* There's a possibility this will break a conditional complication test which disallows overwriting an existing definition -- I don't know if that will break the build, but the test should be removed either way.
* Using append syntax ("-define+=" on the command line or ant tasks, or append="true" in flex-config) and redefining a value works now if you use an already-defined namespace and name.
* So your flex-config may have -define=CONFIG::debug,false, and you may want -define+=CONFIG::debug,true from the commandline build, or FB build.
* Made the ASC ConfigVar fields final as a sanity check since overwriting is now allowed. It would be harder to track changes and subtle bugs if they were mutable. This means that you must build a new ConfigVar object if you need to make changes.
Bugs: SDK-15848
QA: Yes. Please read the updated javadocs in CompilerConfiguration. Tests need to be added to validate that overwriting is allowed, and happens correctly in different situations: I believe the order should be that flex-config is overwritten by a custom config (can we have more than one user config? is the order deterministic? I forget...), is overwritten by commandline or OEM. Did I miss any? (I didn't write code which changes this, it works however the existing configuration system allows overwriting and appending; if we have tests for that, maybe we don't need them duplicated for this feature.)
Doc: Yes. Please read the updated javadocs in CompilerConfiguration.
Reviewer: Pete
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15848
http://bugs.adobe.com/jira/browse/SDK-15848
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/ConfigVar.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMConfiguration.java

Please note: I AM USING:
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
And that's what's supposed to fix this problem in the first place, right??

How do I get my autogenerated service code to update

If I add some extra columns to me database table , how do I get my autogenerated service code to update? I know how to refresh the service but that doesn't appear to update any of the stuff like this with the new columns
     // initialize property maps
        if (model_internal::dependentsOnMap == null)
            // depenents map
            model_internal::dependentsOnMap = new Object();
            model_internal::dependentsOnMap["noticeID"] = new Array();
            model_internal::dependentsOnMap["text"] = new Array();
            model_internal::dependentsOnMap["title"] = new Array();
            model_internal::dependentsOnMap["categoryID"] = new Array();
            model_internal::dependentsOnMap["createdDate"] = new Array();

Adobe, you never cease for 1 day to impress me, imagine thinking of that
really cool feature, many thanks
best wishes
Nikos
Web Developer

HT1277 I receive delivery failed emails for emails I never sent

I receive "delivery failed" emails for emails I never sent to email addresses I don't recognize. Who do I contact?

Welcome to the Internet. Here, have some spam. :-)
You're either being spammed (and your mail filters aren't fully dialed in and set to ignore or delete this dreck), or your email address was forged (as the return address) by a spammer sending out messages to others and folks that don't know how to properly configure and operate an email servers are now causing collateral damage by reflecting that spam run back at you. (No spammer really wants to deal with all those bounced messages, after all.)
It's possible that your mail address has been acquired by a spammer, but it's equally possible that - if your email address has a common name or string to the left of the @ sign - that the spammers determined your address by brute force, too.
And yes, make sure your email passwords are not in the stock attack dictionaries (the list of the five or ten thousand most common passwords are widely known), and (if your ISP permits it) use SSL/TLS (encrypted) transports to access your ISP mail server.

Requisitions that are never approved

Requisitions that are never approved
I'm wondering what other companies are doing (if anything) about requisitions that never get approved. Is there any bad side effect or strange metrics that are produced if there is an ever growing pool of requests that are basically in limbo? We're on 2006.0.6.
When we first implemented RC, professional services recommended putting an escalation in that would notify us (administrators) when an approval task was way overdue so that we could cancel the request. Well now that we're actually using the system we've discovered that it isn't even possible to cancel the request during the approval moment (only the requestor can). We could "reject" the approval, although that isn't really what we want to do and may cause more confusion with the customer.
So I'm hoping someone out there with a more mature install has some wisdom for me. I'm hoping that its fine to just ignore the requests that are never approved, but I don't want to find out later on that it was a mistake :)

Emir,
Sorry for replying only now. At first, I was having trouble with the SOAP enveloppe myself, so i used the libraries found in any programming language. Unfortunately i cannot share codes due to company policies. But, you(or a programmer) may have an idea of what i am referring to and twick the code a little:
http://www.bigresource.com/VB-manually-create-a-S

Security/Calls and Services Code for Pantech Hotshot

I have been trying to get assistance with this issue from Verizon on and off for more than six months, and am so disgusted by the absolute unwillingness to help me displayed by Verizon that I can't think of anything that would motivate me to continue service beyond the contract end date.
I want to be able to utilize the security options on the device to restrict outgoing calls and messages being made by an unauthorized person on my phone. This feature is standard on even the most basic phone models by virtually ALL mobile service providers.
However - when I follow the instructions to access the menu to select these settings, I am confronted with a request for a 4 digit "Calls and Services code". According to ALL printed and online information from Verizon, the default pin is the last 4 of the phone number. As I have NEVER been able to access the Calls and Services menu to ever even set up a pin, then the last 4 of phone number default should be the only possible code.
But the phone rejects that PIN. As it also rejects the PIN I established under Security/Phone Only.
So, Verizon folks - can anyone tell me WHAT THE $%# I AM SUPPOSED TO DO NOW???

Robin - thank you for the response, but unfortunately it did not work. It
reset the '"Phone Only" lock code, but I still receive the 'Incorrect Code'
error message when I try to access the "Calls & Services Code". This is
important to me because I am unable to prevent anyone who picks up my phone
from making calls, changing settings, etc by setting security measures
against it. That has been a standard feature in wireless phones for many
years now, and even the most basic phone models allow for this. So I am
perplexed about why I am unable to do so with this phone.
On Sun, Jan 5, 2014 at 8:15 PM, Verizon Wireless Customer Support <

Loops in method are never executed??

Hello,
I have a short program that I wrote to practice manipulating arrays and to
practice modular design. The source compiles and the program executes,
however the 2 loops in the process() method are never entered, I have tried
do-while loops and the for loop(which was effective for the same program
written with non-modular design). the program will execute the
System.out.println("\nThe array values recieved are:\n");
inside of the process(), but ignores the 2 for loops. I have purposely declared int size; without a value such as int size=0, because I am prompting the user to enter a value for the array and I pass that value into the size of the array.
I have worked and researched for a couple of days on this. I will post the
code below and any help would be greatly appreciated. Thanks, Jeff
import java.io.PrintStream;
import javabook2.*;
public class Tester
public static void main (String [] args)
{ App a;
a = new App();
a.start();
class App//data members of the App class
SimpleInput input;
String tittle;
int size;
double [] rainfall;
public App()
{ //constructor
input = new SimpleInput();
rainfall = new double[size];
public void start()//start method
describe();
process();
public void describe()//prompts the user for info
tittle = SimpleInput.getString("What is your name?\n");
System.out.println("\nNice to meet you " + tittle);
System.out.println("\nWe are now going to get some practice with arrays!");
size = SimpleInput.getInteger("\nPlease enter the size of your array:");
System.out.println("\nThe size array you specified is " + size);
System.out.println("You will be prompted " + size +" times for rainfall values.");
public void process() // array method, declared in the start() method
for( int i =0; i<rainfall.length; i++)
rainfall[i] = SimpleInput.getDouble("\nPlease enter rainfall amount " +(i + 1));
System.out.println("\nThe array values recieved are:\n");
for( int i=0; i<rainfall.length; i++)//.length is used if you dont know the size of aray
System.out.println(rainfall );

Add rainfall = new double[size]; as the first
statement in your process method.Thank you all for your responses. I tried adding the above statement as the first line in the process() method and the program worked perfectly. I learned that I tried to construct the array before I even got the value from the user, and that after I got the value is when I should have just passed that value into the array size. thanks, Jeff

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Spa8000 - Feature dial service codes are never sent

Similar Messages

Maybe you are looking for