Spaces is counterintuive for my workflow

Hi all,
I have been using virtual desktops on a number of platform before becoming a happy Mac user. I am quite happy of Spaces, with one caveat: it behaves counterintuitively for my workflow.
I am used to have different projects on each desktop. A typical workflow,
1) On Desktop 1, I open MacVim (or any other editor) and a Terminal. I will be working on Project1
2) I realise that I want to work in parallel on a different Project, say Project2. It seems natural to me to put this in Desktop 2, and to open a new instance of MacVim and a new instance of Terminal. This can not be done efficiently, as Spaces will *force me* to go back to Desktop 1, open a new MacVim Window, a new Terminal window, and then move them to Desktop 2.
I understand that Spaces was done with another kind of workflow in mind (use a certain Application only on one Desktop).
Is there any way to obtain what I want? It's becoming a bit frustrating.
Thanks a lot
Daniele

Daniele,
I'm not sure but see if this idea helps. Open the (Exposé & Spaces) Preferences Pane, and make sure that (When switching to an application, switch to a space with open windows for the application) is unchecked it is found near the bottom of the window. Now while Project 1 is in space 1 or what ever, switch to space 2  (Command) + tab to application one in this case Terminal now hit  (Command) + n. It will make a new window for terminal. Ok now I don't use MacVim but switch to it and use what keyboard shortcut you use to open a new window. Now you have a new Space if you will that is separate from your second one, and it wont force you back to space 1.
I hope that helps,
Weston

Similar Messages

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.

How to use different stylesheets for ChangeAttributeRequest workflow in OAM

Hi,
We have a requirement to invoke different change attribute request workflows (change password ,change email etc..) from external JSPs..
I want to apply different stylesheets for each workflow. In the workflow URL if i enter style=stylesheet-name its not using that stylesheet. Always its using the same base stylesheet (wf_changeattr.xsl). How can i use different stylesheets? Any pointers on this is appreciated.
Thanks inadvance..
Regards,
Srikanth

Hi Colin,
Thanks for your response. Now i am able to invoke different xsls for different workflows.
I did a mistake by entering style=stylesheet-name. I verified the same with xsl=stylesheet-name.
Its working fine now..
Thanks & Regards,
Srikanth

My iPhone 4s keeps showing more space being used for photos than i have - i have deleted cache folders, unselect and reselect in iTunes and nothing appears to work my iPhone still shows 6.5 gig use of photos when i only have the camera roll listed

my iPhone 4s keeps showing more space being used for photos than i have -
i have deleted cache folders, unselect and reselect in iTunes I read one post
where they said keep syncing and in a couple days it would correct itself, that
hasnt happened. I have see others have the same issue but no solution and nothing
appears to work my iPhone still shows 6.5 gig use of photos when i only have the camera roll listed

i thought the photo stream only holds 1000 i usuaaly take each month and save them to iphoto but if thats the my ipad should say the same amount and it doesnt - it shows 2.5 gig which is correct for iphoto. and i havent ever had that much but if for some reason icloud has that much saved how do i delete and again if it does why doesnt ipad show that amount _ HELP!

Customizing request for a workflow

Dear experts,
I have created a workflow. I want to move the workflow from one client to other for testing it. For this i need to transport workbench and customizing requests of my workflow. Can you please tell me how to find the workbench and customizing request of my workflow. Is there any option in SWDD which will show the specific workflow & customizing request for that workflow.

Hi,
se01 will help you find the transport with your workflow but not the any other transports which may be part of your workflow project.
se10 transaction can be used to see transports by user. Check off both customizing and workbench requests since you will have both types of transports. The user id needs to be that of the developer that created the transport. Modified vs Released - select both if you are not sure if the transports have been released or not.
Paul.

Adobe Photoshop for Video Workflows: New Features and Timesaving Tips | Adobe at NAB 2013 | Adobe TV

See the latest features in Adobe Photoshop and learn time saving techniques video editors and motion graphics designers can benefit from when using Photoshop for video workflows.
http://adobe.ly/14eyrIi

Great tutorial. When I build a timelapse I start by importing the image sequence and then make the proper frame size on export. Is there a benefit to creating a project at the proper frame size and rate first?
Thanks

How to create business operation for starting workflows

How to create business operation for starting workflows from worklist?
When I call methods that implements business operation from java class everything
works fine(wlpi-ejb.jar is required), but when I call business operation from
Studio I can't use classes from wlpi-ejb.jar.

Business operation is called by WLIS. So, I include wlpi-ejb.jar into WLIS classpath.
Studio uses deployed EJB from wlpi-*.jar, I don't know why Studio doesn't see
methods from deployed EJBs when WLIS classpath contains wlpi-ejb.jar.
"Andrew Pitonyak" <[email protected]> wrote:
>
When studio starts, what is your classpath? If you use the included batch
file to start it, then your class path may not include this :-)
Andrew
"Raul" <[email protected]> wrote in message
news:[email protected]..
How to create business operation for starting workflows from worklist?
When I call methods that implements business operation from java classeverything
works fine(wlpi-ejb.jar is required), but when I call business operationfrom
Studio I can't use classes from wlpi-ejb.jar.

How to double space in Pages for iPad?

How to double space in Pages for iPad?

Double spacing is double spacing whether you are using Pages or Word. Double spacing is dependent upon the font size that you are using in the document no matter which word processing app that you use.
Pages on the iPad has limited fonts and chances are pretty good that if you import a Word file into Pages on the iPad, there will be some formatting or font issues.
But once again, Helvetica in Pages is pretty much the same Helvetica as you would be using in Word. If you use a font in Word that is not available in Pages, you will see a warning message that some elements of the original document have been changed.

SRM 7.0 EHP1 - new functions for BRF workflows

Hi all,
We currently upgraded our SRM 5.0 system to SRM 7.0.
We need some inputs whether to activate the EHP1 for SRM 7.0
Are there any limitations in terms of BRF workflows which are now covered in SRM 7.0 EHP1?
In SRM 5.0,we were using n step header level approval workflow using the BADI and custom tables for approval determination.
We need to map the same in SRM 7.0 now but wanted to know the limitations in terms of any new functionalituies which can be used in terms of Shoppign cart workflow in SRM 7 EHP1 v/s SRM 7.0 SP10.
I read in one of the posts in the forum that parallel processing for BRF workflows is not supported in SRM 7.0 EHP1.Please advise.
Please advise.

Thanks Saravanan.
We are having lot of issues with the ACW in SRM 5.0 and hence plan to reimplement the workflow in SRM 7.0 using the process controlled workflows plus the new features introduced for workflow.
Can you please advise if ACW are better than PCW or vice-versa??
I dnt have the link for the post but cans someone confirm if parallel processing is supported in SRM 7.0 EHP1 workflows??
Are there any shortcomings in terms of the BRF workflows in SRM 7.0 EHP1?

How to increase the Heap space of Jdeveloper for about more than 512 MB?

When starting JDeveloper, the application within JDeveloper is throwing the error message:
"could not reserve enough space for object heap"
and a windows popup with the following error message:
"Unable to create an instance of the Java Virtual Machine Located at path: ..\..\jdk\jre\bin\client\jvm.dll "
To resolve these issues, i know that adding the following in ide.conf , jdev.conf will help.
AddVMOption -XX:MaxPermSize=512M
AddVMOption -Xmx512M
AddVMOption -Xms512M
I have got 10 GB of RAM in my desktop machine and virtual memory of 15 GB (page size). I am not able to increse the heap space of Jdeveloper for about more than 512MB. This is really frustrating..I had to restart my jdevloper after 3 or 4 deployments.....Has anyone tried success in increasing the heap space in jdeveloper for about 2 GB?
Regards
Prasath.C

Yes, i know that -XX:MaxPermSize has nothing to do with Heap Memory. I Just pasted all my configuration settings to know if some thing or the other has caused the issue.... After hearing few people who increased the heap space to more than 512m , i played with those settings again and figured out few things...Mine is Jdeveloper 11.1.1.4, 64 bit Windows 7 environment, 64 bit Java/ JDK.
First, i was deceived by one suggestion in forum that, keeping max and min heap memory to same size always will yield in good performance...From that time on wards, i was always increasing both and was never able to move more than 512m..But this time, i kept the min memory as constand and kept on changing the max memory ..
Jdev.conf
AddVMOption -XX:MaxPermSize=512M
AddVMOption -Xmx972M (I was never able to increase more than this size, though i have around 10GB RAM, if not Jdev doesnt startup)
AddVMOption -Xms512M
Ide.conf
AddVMOption -Xmx2048M (here i was able to increase)
AddVMOption -Xms512M
But even then, i was not seeing my changed settings at the time of deployment...
starting weblogic with Java version:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms512m -Xmx512m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer ..........
Then i changed again into
setDomainEnv.cmd of my default domain
set USER_MEM_ARGS=-Xms512m -Xmx2048m -XX:MaxPermSize=512m
Then i stared my deployment...this time i could see a real boost in deployment...and my page was launched in a fraction of minute..
tarting weblogic with Java version:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms512m -Xmx2048m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer ..........
This is my working configuration....Thanks guys for your replies.....
Regards
Prasath.C
Edited by: Prasath C on 05-Aug-2011 04:41

Looking for a Workflow-Checklist (plugin)

Hello everybody,
I really like LR as my primary workflow-tool.
What I'm actually looking for: a "workflow-checklist-plugin".
This plugin should be a plugin visible in the develop module of Lightroom.
It (the plugin) should show me a list of checkboxes (which I could define).
These Checkboxes contain the different steps of my LR-Workflow (to make shure that I don't forget one of them).
Also, the "TAG" Metadata of the photo should be edited within the plugins-windows (with this feature, there's no need to jump back to the library to add a TAG).
All data might be saved in the photos metadata.
To describe a bit more in detail what I mean, I generated a "sample picture"
Do you have any idea if there's somewhere such a workflow-plugin?
And: do you have any additional idea if it's possible to modify the TAG of a photo in the develop module (without jumbing back to the library)?
I should be glad about any suggestion as I just started a small project on freelancer and don't have a good feeling about the offers coming in ;-)
Thanks for your help,
regards,
Marcel

Hi everybody,
thanks a lot for your very helpful suggestions regarding the workflow.
Coming back to the plugin I'm looking for, here are four more examples to explain what I want to address with this "customizable checklist" in the devlop module of lightroom:
-identify all photos for batch processing in photoshop (HDR, stacking etc.) - one point on the checklist ("batch in PS") and a smart collection to filter all this photos would speed up this a little bit.
-identify all photos that needs a "batch" noice reduction. I.e. I have many photos for which I do the first noice reduction depending on camera model and ISO. With a checkmark at "batch noice reduction", these photos could be found easily in a smart collection (and would not be done twice).
-identify all photos accepted by "fineart gallery x". With a checkmark on the checklist and a smart collection showing all the photos with this checkmark, you could get a visual understandig of what (kind of) photos they've accepted (and what not). This point probably is not a point for the development module only, of course, but for the library too. So, if the checklist could be shown in the library too, it woould be fantastic.
-identify all photos for which I transferred the copyright to somebody else (i.e. a client) or photos which I develop only once as an original (and which will never be pubished online).
Of course, all this could be done by using the "tag" field. Jumping back to the library, putting in some words in the tag (i.e. "PS-batch","HDR" etc.) would do this job too (that's how I do it today).
But a quick to "check/uncheck list" seems to be the faster way (just my 2c).
And the plugin I'm looking for should only do one thing: speed up the work not done "with the camera at hand."
From my non-programmer-view, this plugin seemed to be not very complicated : extend the LR metadata and show a checklist to edit this metadata (nothing more ;-)
But I already learned that, within LR, this is not as easy as it seemed ;-)
As I initially wrote, I also posted a freelancer project for this programming and there are already applicants for this job but "I have to check if they really do have the competency needed" (I'm not very optimistic, that I'll find someone thru freelancer).
So, I'm still hoping that there is already a plugin doing this job or that it will be easy to develop this "show a list-plugin ;-)
Regards,
Marcel

N level-Approval for contract workflow (WS14000148) in SRM

Hi SDN'rs
I want to activate N level-Approval for contract workflow (WS14000148) in SRM
When I am creating the contract in SRM I can see the approvers in the approval preview.
But when I release the contract and look at the approval privew there are no approvers
and the status of the contract is released.
We are on SRM Server 5.5 and SP 07.
Here what I did
1. I implemented the BADI 'BBP_WFL_APPROV_BADI' using the sample implementation and populated the approvers.
2. I activated events SAVED,CHANGEVERSIONSAVED for WS14000148 in OOCU transaction.
3. I see event linkages for WS14000148 for both events SAVED,CHANGEVERSIONSAVED in SWE2 transaction.
4. I assigned role SAP_EC_BBP_PURCHASER to for subworkflow N step for contract WS14000147.
( User who is creating contract has this role)
5. Consistency check for WS14000148 is green and WS14000147 is yellow in SWUD
6. Event simulation for BUS2000113 and events SAVED,CHANGEVERSIONSAVED shows WS14000148 successfully started.
I see dump in ST22 with errors TSV_TNEW_PAGE_ALLOC_FAILED and SYSTEM_NO_SHM_MEMORY with WF-BATCH is this any thing to do with that?
If any one know what are the steps I am missing please let me know.
Thanks
A S

Hi
Please refer to these OSS notes which might help.
Refer to following OSS Notes ->
Note 735026 - Memory problems at BBP_GETLIST_INDEX_FILL
Note 932836 - BBP_GETLIST_INDEX_FILL: Activation not possible
879528 WS14000148: Send mail to initiator incorrect
901200 WS14000148 dia wrk item despite NO_FURTHER_APPROVAL_NEEDED=X
879873 BUS2000113: The Object_ID attribute may be empty
903015 BAdI Workflows: Events and parallel steps
901068 BAdI Workflows: Enhancement of Note 896556
769458 Dynamic workflows: No adjustment after document change
972757 Occurence of the SYSTEM_NO_SHM_MEMORY runtime error
741864 FinBasis: Termination TSV_TNEW_PAGE_ALLOC_FAILED
864473 Deactivating the shared memory when searching by prefix
928642 Container factory: Shared memory dump update
Refer to these links.
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/26/0f8b41ed891609e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/f7/a6a3415e34b05fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm

Also raise an OSS message with SAP as well.
Regards
- Atul

In itunes, my ipod shows six gigabytes of "other" and i have no idea what that space is used for.

In itunes, my ipod shows six gigabytes of "other" and i have no idea what that space is used for.

Other usually contains app data and other miscellanious items. However 6GB is awfully big so it's likely been corrupted. I would restore.

How to search for std workflows

hi
what is the best way to search for std workflows in SAP. I tried the tcode SWDM( Business Workflow Explorer ) but it does not bring correct results.
can any one guide me on which is the best way to search for std workflows?
thanks
Sameer

Hi,
SWDM should yield the correct results, make sure you're defining your search correctly.
Another way is to look directly in table HRS1201 (I think, im not in an SAP environment now).
But here you also have to know the business objects related to the functional area where you are looking for standard workflows.
Another thing is to use the search functionality in SDN with your query ike "standard workflow for ..."
Kind regards, Rob Dielemans

ORA-01536: space quota exceeded for tablespace 'SYSTEM'

Hi All,
Please help me to understand the below issue. I am trying to create a table as below. Connected as APPS user.
SQL>create table test_ts(id number) tablespace APPS_TS_TX_DATA
ORA-00604: error occurred at recursive SQL level 1
ORA-01536: space quota exceeded for tablespace 'SYSTEM'
ORA-06512: at line 2
Below are the details of the user
SQL>select * from user_ts_quotas
        where tablespace_name = 'APPS_TS_TX_DATA'
TABLESPACE_NAME     BYTES     MAX_BYTES     BLOCKS     MAX_BLOCKS
APPS_TS_TX_DATA     929038336     -1     113408     -1
SQL>select * from user_ts_quotas
        where tablespace_name = 'SYSTEM'
No Rows Returned.

Hi,
Thanks for the response. There is no QUOTA defined for SYSTEM user, so it is UNLIMITED, No?
Below are the details of "SYSTEM" tablespace. Is there any issue with this?
TABLESPACE_NAME           BLOCK_SIZE INITIAL_EXTENT       NEXT_EXTENT           MIN_EXTENTS            MAX_EXTENTS
SYSTEM                  8192               16384         16384                1                     505

Spaces is counterintuive for my workflow

Similar Messages

Maybe you are looking for