Customer stock reset -- sales order deleted.

Hi Gurus,
customer stock tied to the sales order is updated. But now the sales order is deleted. Now, How to remove the material form customer stock.
Thanks in advance
ram

I think you need to have a sales order, remove the stock first then delete the sales order. Try creating a sales order with the same customer first, then remove stock (same way as you brought in or adjust out) then delete sales order.

Similar Messages

How to resrve the stock to the customer against the sales order

hi,
sap gurus,
good morning to all,
how to reserve the stock to the customer against the sales order if this process is not MAKE TO
ORDER SCENARIO.
the prices of the products will be often changing drastically so
he is following MAKE TO STOCK Process in his production process.
so with out using m.t.o. process how to reserve it against the customer.
for eg:
in the market when the customer/dealer/stockist coems to know that prices are going to increase
then obviously he tends to purchase in bulk quantities and reserve it in godown.
so how to map that process.
help me on this.
regards,
balaji.t
09990019711

Dear Balaji,
This can be done By MM consultant through movement type. to move the stock from unresticted stock to customer stock.
Regards,
Sudhir

Customer consignment stock to sales order stock

Hi all,
my customer has done sales orders with movement type 631 which is for consignment. Actually he has to do normal delivery process.He has completed all the billing invoice documents also.
Now the stock is showing as consignment stock. How to issue these stocks for normal delivery process without cancelling the documents.
regards
anup

hi,
thanks for quick response. It is not possible to make 632 movement through mb1b.
in 413 k IT TAKES ONLY VENDOR STOCK
REGARDS
anup

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

How to transfer the stock form Project stock to Sale order stock

Hi
How to transfer the stock form Project stock to Sale order stock
I tried to do this with movement type 413Q
System is giving me error
Valuated project stock not allowed with customer stock.
Message no. KI346
How to do this
Thanks
NK

You can use Mov Type 412-Q
412 Q Transfer posting project to own - reversal
Thanks
Rajesh

Output Type on Sales Order delete

Is it possible to activate Output Type, sending iDoc, on Sales Order deletion?
On Sales Order create, change it works well, but not on delete.

hi,
this is Possible.
but it is not possible through Message Control ..
you need to write custom program..
that program read deletion data from CDHDR and CDPOS table and append data to idoc and post.
Prabhudas

CRM - Automatic Return Delivery for Customer Owened Repair sales order

Hi Guys,
We are implementing Customer Owned Repair sales order Process in CRM and requirement is that once order gets replicated in ECC, automatic Return delivery should be created.
We have following settings done,
1. Order Type ZREP has automatic delivery creation set : A
2. Item category has special stock indicator E and and Returns
3. schedule line category IR has 653 Movement with special Stock E and availability is not flagged.
so in this configuration, when i create Order Manually, Return delivery gets created automatically even if there is Zeor stock (Schedule line confirms the Qty) but while Order gets replicated from CRM it does not because schedule line does not confirm the qty (Zero Qty).
Please advise on this asap as we are in verge of delivery and facing this issue.
Regards,
Dharmesh.

Hello Peter,
Regarding Posting of Goods Issue for Spare Parts in SAP R/3 Materials Management,
The data posted depends on the logistics scenario(s) that you use. The system therefore first determines the logistics scenario defined for the combination of transaction type, item category, service organization, and other relevant information required for the scenario (for example, movement type or special stock indicator in SAP R/3).
Availability information informs you whether the service parts are currently in stock. Each service part item generates a reservation in the back end system, which can be used to trigger an early procurement process.
To know more about the same refer the below link:
http://help.sap.com/search/highlightContent.jsp
http://help.sap.com/saphelp_crm50/helpdata/en/cb/f876d513c56e4e864c15517ff67e92/frameset.htm
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

Issue related to confirmation of Stock in Sales Order.

Hi Gurus,
I have an issue related to confirmation of Stock in Rescheduling.
I have created a Sales Order for 10 Cases. I am using a Rescheduling Program for the confirmation of Stock
in Sales Order. I have a stock of 100 Cases but still when i am putting that Order in Rescheduling Program for
confirmation it is showing me Deficit of Stock.
Also I have checked the Stock in MMBE it is showing Stock of 100 in Unrestricted Use.
Also I have checked in MMBE the On Order Stock is 150.
Please could you give me relation of On Order Stock in this.
What role it plays in Availability Check.
Is it because of On Order Stock I am not able to confirm the Sales Order Quantity.
Awaiting for the resolution.
Thanks & Regards,
Sam.

Hi Jameer,
Thanks for your reply,
I have replicated the same scenario in Quality it is working fine.
I forget to add up one more thing in my last issue. There is Product Allocation in Material Master.
When I go to Sales Order change screen and go to Schedule Line Level to Product Allocation screen
it is showing the Stock. While same scenario in Production user is not able to confirm the Stock Quantity
in Sales Order. I want to check the Alloted Stock against that Particular Customer in Product Allocation.
I need the table and T Code so that I could do the detail analysis with respect to Product Allocation Stock.
Please if you could help me out.
Thanks & Regards,
Sam Rock.

Individual customer requirements and sales order requirements

Hello Gurus,
Can anybody please explain me the difference between individual customer requirements and sales order requirements.
Please clarify
Thanks,
Nilesh

Hi,
*Individual Customer Requirement *
Generally this is the material is produced against a Sales order,
They will have the Stock Categroy as E as special Stock.
They can be consumed only by the Relevant Sales order.
Mostly in Case of the MTO this is applicable.
Sales order Requirement.
This is again Sales requirements.
But it can consume any stock,
the material is not produced against any specific sales order ,
This is mostly in the MTS Scenario.
Kindly let me know your feedback.
Reg
dsk
Edited by: DSk on Dec 7, 2010 3:30 PM

Customer Name on Sales Order not in Data Collections

Hi,
I am looking for some help. My company just did an upgrade from 11i to R12 in the middle of May. As part of the upgrade we installed ASCP. We have noticed that certain customers are not being collected when running Standard Data Collections. We have open sales orders in the system for the customer. The sales order are being collected properly and appear in the plan. When we show the Customer field in the 'Supply/Demand Screen' in ASCP, the field is blank for select customers. Is there anything on the customer master or sales order line that would prevent the customer name from being collected? Any insight would be helpful.
Thanks
Rich

You can go to order organizer screen select the OA NO which you are not able to see in the ASCP workbench, go to line items---using show field get the Demand visible
tab on screen-----default value should be 'Y' if blank then then that could be the one of the reason.

Stock ans sale order stock

Dear All,
What is difference b/w stock and sale order stock.and what is its impact if i use strategy 40.and what is the movement type to transfer stock to sale order stock

What is B/W stock?
Strategy 40: Planning with Final assembly.
When you plan the sales order, MRP create receipts and when you do the GR, the stock will posted to to Unrestricted stock. PGI for the Sales order deliveruy is done from the Unrestricted stock. which can be used by any sales order.
The Movement type to transfer the Stock from Unrestricted to sales order stock is 411E.
if you use 20 or 50 startegy depedning on your requirement, the stock directly is posted to the Sales order stock, which cannot be consumed by any other sales order.
Regards
Ratan

Function Module to fetch Customer Number from Sales Order or Process Order

Hi Gurus,
I am looking for a Function module which gives me customer number from Sales order or Process order.
Please let me know of any FM's available.
Regards,
Madan

Hi,
Thanks for your response.
I am actually looking for function modules which take "Sales Order" or "Process Order" as input (import parameter) and return Customer Number as output (export parameter).
Please suggest some function modules you know any.
Many Thanks,
Madan

How to Copy Sales Text Data from Customer Master to Sales Order.

Hi SAP Guru's
I have Completed Configuration for Central Text for Customer Master for two texts 1)Additional Attachments 2) Wooden Packing
I got these two fields in Customer Master.
I need these data to be copied from Customer Master to sales order. But i am unable get these two in to sales order.
Steps which I have done for Text Determination.
1) Text Id in for Text Object KNA1
2)Placed Text Id in Text Procedure and assigned this procedure to Customer Account Group.
Could you please advice me
Thanks in Advance.

Text Control
In this IMG activity, you define the rules for text determination. You must carry out the following steps:
Select a text object and define the rules for text determination for this object. Text objects are, for example, the sales texts in the customer master record or the sales document header.
Define the permitted text types for every text object. If the text types contained in the standard SAP R/3 System are not sufficient, create new ones.
Define the access sequences. This way, you define how the SAP System should determine the texts for a text type.
Group the text types together in text determination procedures. The SAP System then proposes the text types from the procedure when you maintain a customer master record or a sales & distribution document. The search for the respective text is carried out using the access sequence which you have stored for each text type in the procedure.
Allocate the text determination procedures so that a procedure applies to the following criteria in each case:
account group customer
sales & distribution document type
item category

Need to copy a custom field from sales order to billing document

Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
solved it myself ....
Regards.
Message was edited by: seshi
seshi

Hello,
Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
Hope this helps.

Monitor sales order deletion in MV45AFZZ

Hi all,
I've added code to userexit sales_doucment_save in MV45AFZZ. However, I have to check it in case of sales order deletion.
Does anyone knows how to find that the sales order is to be deleted ? In the exit itself I couldn't find any field to check that it's actualy deletion and not change.
Thanks in advance,
Shai E.

You should use..
exit..
USEREXIT_DELETE_DOCUMENT
What are actually trying to achieve. Can you give more info..
Rgds,
Samir

Customer stock reset -- sales order deleted.

Similar Messages

Maybe you are looking for