Specific free Space in Flash on 6509

is there any specific free space should be left in the Flash on 6509?
because 6509 has got 128DRAM 32MB Flash.
assume that only 2MB of free space is avaliable in flash, will that affect anything? according to me, i was assumed that only in DRAM free space is necessary. am i right? if so please correct me

use the following CONFIG REGISTER CALCULATOR to determine what your 0x2 confReg will do when the router boots:
should probably be 0x2102 or the likes..verify with the tool.
see this link for the Configuration Register Calculator:
http://gtcc-it.net/billings/configreg.htm

Similar Messages

  • Verifying Free space in Flash

    Hi everyone,
    I am trying to upgrade IOS on WS-C3750G-24T  to   c3750-ipservicesk9-mz.150-2.SE5.bin
    I was getting error
    %Error writing flash:/c3750-ipservicesk9-mz.150-2.SE5.bin (No space left on devi
    ce)
    So i deleted the old ios from the flash
    witch#sh flash
    Directory of flash:/
        3  -rwx         616   Mar 1 1993 00:14:02 +00:00  vlan.dat
        7  -rwx          24   Mar 1 1993 00:16:49 +00:00  private-config.text
        8  -rwx        2072   Mar 1 1993 00:16:49 +00:00  multiple-fs
    15998976 bytes total (15993856 bytes free)
    New IOS is 17.42MB.
    Need to verify that total space on flash is 15998976  ???
    Regards
    MAhesh

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Really early 3750s only had 16 MB of flash, so you're going to be unable to load a 17 MB image.

  • Increase free space in MacBook Air

    How do I increase free space on flash drive for Air.  My free space decreasing and "other" increasing size!

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion's Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
    What is "Other" and What Can I Do About It?- Apple Support Communities

  • Trying to put pics on a flashdrive and keep getting error that there is not enough free space when there is.  I tried to empty trash with the flash drive in but still not working.  Help!

    Trying to copy photos in folder on desktop to a flash drive but keep getting error that there is not enough free space when there is.  I read to delete trash with the flash drive in but that still doesn't work.  Help!!

    How is the flash drive formatted? Open Disk Utility (Applications>Utilities) and see how it's formatted - that might be the problem.
    Clinton

  • Fill free space with specific playlist

    Hi Guys,
    Had a search but couldn't see the answer.
    How do I fill the free space on my iPhone with songs from a specific playlist on iTunes then force iTunes to re-randomize on each sync?
    Thanks!
    Max

    Bump?

  • USB Flash Drive: Trying to recover space from "erase free space" problem. Finder shows no files i

    Hi,
    I have an 8gb flash usb drive. (recognizes 7.5gb)
    I must have stop the operation or use erase free space orsomething stupid. Regardless, i just want to get it back to full capacity of7.5 gb. I think right now its only 6.2 gb. Finder shows no files inside thedrive. Let me know what i need to do. I try looking at different webpages aboutsparseimage file or 00 written in place of my missing 1.3 gb. But i dont knowhow to get it back. I am new to OSX, so please help me with clear instructions.Thanks

    You can reformat it. Plug the drive in, launch Disk Utility (in your Alications> Utilities folder). Select the dove, theme erace/reformat it.
    Just be carefully you accidentally don't erase any other external drives!

  • Can't save file on iOS device with low free space available

    Hi,
    I was using SharedObject to save settings in my game. However, recently I discovered on one of our devices it doesn't work. I've found somewhere on this forum discussion that air can't save sharedobject when available space is lower than about 300mb (link here: Bug#3711301 - sharedobjects fail when available storage is low). On my iphone it's about 40mb, but file, which I want to save is just 2 variables.. persistenceManager doesn't work too (well i've looked at source and it's just using SharedObject). So i've decided to just write file by myself:
    declarations:
    public var mute:Boolean = false;
    public static var fullId:String = "";
    then in constructor:
    flash.net.registerClassAlias("Settings", GameSettings);
    load();
    and finally save() and load() functions:
    public function save():void
      try {
      log("begin save()");
      var file:File = File.applicationStorageDirectory.resolvePath("settings.txt");
      var stream:FileStream = new FileStream();
      stream.open(file, FileMode.WRITE);
      var settings:GameSettings = new GameSettings();
      settings.fullId = fullId;
      settings.mute = mute;
      stream.writeObject(settings);
      stream.close();
      log("end save()");
      catch (error:Error) {
      log("[ERROR] " + error.name + ": " + error.message + "\n" + error.getStackTrace());
      public function load():void
      try {
      log("begin load()");
      var file:File = File.applicationStorageDirectory.resolvePath("settings.txt");
      if(!file.exists){
      log("settings.txt does not exist, created new one..");
      save();
      return;
      var stream:FileStream = new FileStream();
      stream.open(file, FileMode.READ);
      var settings:GameSettings = stream.readObject() as GameSettings;
      mute = settings.mute;
      fullId = settings.fullId;
      log("loaded mute = " + mute);
      log("loaded fullId = " + fullId);
      stream.close();
      log("end load()");
      catch (error:Error) {
      log("[ERROR] " + error.name + ": " + error.message + "\n" + error.getStackTrace());
    My GameSettings class:
    package
      public class GameSettings
      public var fullId:String;
      public var mute:Boolean;
      public function GameSettings()
    This works on desktop, android. Works on my ipad too, which has 10gb of free space. However, like I said, it doesn't work on iphone5s with 40mb free memory.
    Here's a log:
    begin load()
    settings.txt does not exist, created new one..
    [ERROR] Error: Error #0
         at Autumn/save()
         at Autumn/load()
         at Autumn()
    It's clear that AIR can't open or write to 'settings.txt' file. What can I do to solve that issue (other than making more free space on iphone)? Is there any workaround for that?

    Any help please?

  • In restoring my mac mini to factory specs-what is considered "free space" as in the question of erasing free space.

    When you go to do a factory restore what is erasing "free space?
    Plus, I have no Command keys on my keyboard-how to do Command R without a Command Key?
    Carol

    CarolF5 wrote:
    When you go to do a factory restore what is erasing "free space?
    Don't bother with that option, unless you are going to sell your computer and want to be sure that your data can't be recovered.
    To be more specific it securely erases the unoccupied space of your hard drive, leaving the rest of your data intact.
    I have no Command keys on my keyboard-how to do Command R without a Command Key?
    You mean you have a PC keyboard? If that is the case the Command key translates to the key with the Windows flag.
    The Alt key is the Option key on an Apple keyboard.

  • SCOM 2007 R2 : Logical Disk Free Space : Did not Alert

    Hello reader ,
                   I know this might be a repeated hearing for you. I have been sitting wit this issue for many hours now. I would like to understand where or what am I missing.
    We have the default 'Logical Disk Space' Monitoring enabled for ALL servers in our environment. In one SQL server, non-system drive(E:) went beyond the warning(2000MB and 10%) and Critical (1000MB and 5%) Threshold.The total space allotted for the Drive
    E: was 79GB. Now the total space left today morning was 698MB. But no alert was triggered.
    I checked the following
    If the  health service watcher was available. - Yes it was.
    If the Space really dropped to 698 - Yes it did. I verified from Performance Report.
    I checked if there are any overrides - Nothing specific found.
    In most of the blogs they said me to check if both criteria was successful - As shown above it is clearly matches.
    Any idea why this alert was not fired ?  
    S.Arun Prasath HP ARDE TEAM

    Thank you Agarwal ! To Answer your Question.
    1) verify the monitor settings again.
    => I did this N number of times.
    2) ensure there are no overrides
    =>  I did this too.
    3) ensure that monitor properties are set for the correct Windows OS (same as that of the server).
    =>What Do you mean here ?. I did not change any settings , it was there by default. No change was done at all.
    4) also confirm that you do not have any other overrides on the two aggregate rollup monitors for "logical disk free space". These aggregate rollup monitors are just below the unit monitor in SCOM console.
    =>Those Aggregate Rollup monitors are disabled. As we already have this unit monitor Enabled. There is no link to Aggregate monitor.
    If all these settings are true, then can you try this. calculate the exact value in both % and MBytes according to your server, put the same values in your monitor through an override and repro the low disk space condition,. you should get an alert.
    => Not so easy to do this in prod. So will keep you posted when this is tested. Looks like this is the only way we can confirm if the alerts are sent.
    S.Arun Prasath HP ARDE TEAM

  • Can I purchase more free space for my iPad?

    Can I purchase more "free space" due to the following message that comes up on my iMac Pro when attempting to sync with my iPad: The iPad cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 11.03 GB required). Or is the only solution to not allow certain things to be synced?

    Try wireless flash drive:
    http://www.sandisk.com/products/wireless/flash-drive/

  • How to monitor DFS shares disk usage/free space?

    How to monitor DFS shares disk usage/free space?
    Using Netapp filer shares to which DFS points. Looking for powershell script to send report.

    Hi,
    How about using Disk Quota function in FSRM (File Server Resource Manager)?
    Please see:
    Quota Management
    http://technet.microsoft.com/en-us/library/cc755917(v=ws.10).aspx
    In your case you can setup a soft quota with a specific size so that when it runs out of space you set, you will get an email or warning according to your setup. 
    If you have any feedback on our support, please send to [email protected]

  • Free space on boot drive constantly decreases until reboot

    Hi there. I have a really weird thing happening that I've never seen before.
    I'm running 10.7.4 on an iMac, and have about 45GB free on the system drive. At least that's right after I boot up the system. After that, the free space available on my HD slowly but constantly decreases, and the computer slowly but surely becomes less responsive. When the free space on the boot drive gets down around 37GB (which takes 2-3 days... I usually never turn the machine off) I get so many spinning beach balls... in ALL applications... that the computer becomes basically unuseable and I am forced to reboot. But as soon as I do, free space is back up to 45GB, and computer is snappy and fast again.
    What the heck?

    Your problem is excessive swapping of data between physical memory and virtual memory.
    That can happen for two reasons:
    (1) You have a long-running process with a memory leak (i.e., a bug), or
    (2) You don't have enough memory installed for your usage pattern.
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination. In Activity Monitor, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table once or twice to sort the table with the highest value at the top. If one process (not including "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more memory over time without ever releasing it.
    This suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details:
    Memory Usage Performance Guidelines: About the Virtual Memory System
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.

  • "Automatically fill free space" & Selected Artists

    When syncing my iPod, I have the "Selected playlists, artists..." radio button checked so I'll be sure to get my favorite music.  I also have the "Automatically fill free space with songs" box checked so my iPod will be full...however, I just added a new artist to my library, selected that artist to be synced, and iTunes told me there was not enough space to transfer a couple of that artist's songs.  So my question is this: why doesn't iTunes delete a couple of the songs I haven't specifically told it to sync, so I can get my favorite new artist?  Is there an option I'm missing, or is this just iTunes just being iTunes?  I guess for now I'll uncheck the "Automatically fill..." box, sync, then re-check it and sync again, but that is frustrating since I'll have to re-sync about 70GB of music to do so...
    Thanks for any suggestions.

    Hi sawpaw,
    One of the new features of iOS 7 is the ability to show all of your purchases in your Music Library.
    Click on the link below to see page 62 of the iPhone User Guide for iOS 7
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    You can change the Settings > iTunes & App Store to turn this feature off for Music
    Cheers,
    - Judy

  • How much free space do I need to have on my 32GB iPhone 3GS?

    How much free space do I need to have on my 32GB iPhone 3GS for optimum performance? I have only 4 GB left and I am worried that performance will soon be degraded.

    Apple allocates space on the flash memory for cacheing proposes. You shouldnt worry. You can fill it up with out preformance problems.

  • FREE LIST와 FREE SPACE관리

    제품 : ORACLE SERVER
    작성날짜 : 1995-11-06
    * Free List 는 해당 세그먼트가 다시 사용할 수 있는 block에 관한 list 이다.
    Free Block이 추가될 때는 Free List의 Head에 덧붙여진다. 예를 들면 Block B5
    가 Free List FL 에 있고 다른 B6 block이 FL에 덧붙여질 때
    FL : B6 -> B5
    즉 B6 가 free block으로 먼저 쓰여진다.
    앞으로 사용할 약어 : V1(V6.0 ~ V6.0.34)
    V2(V.6.0.35 ~ V7)
    * Free List 에는 다음과 같은 것들이 있다.
    . Txfl(Transaction Free List) : 모든 트랜잭션에 할당되는 Free List이다.
    한 세그먼트에는 최소 16 Txfl 이 있고 이는 블럭이 꽉 찰 때 까지 필요한
    만큼 증가한다. 모든 프로세스는 해당 인스턴스에 주어진 Txfl에 접근 할 수
    있다.
    . Prfl(Process Free List) : 하나의 프로세스에 할당되는 Free List 이다.
    하나의 프로세스는 다른 프로세스에 할당 되어진 Prfl 을 사용하지 않는다.
    . Sgfl(Segment Free List) : Prfl과 같다.
    . Msfl(Master Free List) : 모든 프로세스가 사용 할 수 있도록 미리 할당
    되어진 Prfl이다.
    <V1 에서의 Segment Header의 Block Format>
    * 세그먼트는 연속된 블럭의 모음인 익스텐트로 구성 되어 있다. 세그먼트가
    생성될때 첫번째 익스텐트의 첫번째 블럭을 Segment Header라고 한다.
    Segment Header는 Extent Control, Extent Map Table, Segment Header,Segment
    Free Space, Transaction Free Space로 이루어져 있다. Extent Control과
    Extent Map Table은 세그먼트에 할당된 익스텐트에 관한 정보를 준다. Segment
    Header Control은 Transaction Free List 정보와 세그먼트가 생성 될 때 명시된
    Instance List(nfb)와 Process Free List(nfl)의 갯수를 가지고 있다.
    * Instance Free List(infl) 갯수는 디폴트가 1이며 1보다 클 경우 Prfl의
    갯수는 Prfl/Sgfl = nfb * nfl 이다. nfb는 init<SID>.ora 의 free_list_inst,
    nfl은 free_list_proc 에서 지정된다.
    <V1 과 V2 에서의 Block Format 차이점>
    * V6.0.35 에서는 기존의 Block Type 5에 Block Type 12가 추가됨으로써 Segment
    Header는 Type 5 또는 12가 가능하다. 이의 구별은 명시된 Free Group의 갯수에
    의해 결정된다. 즉, Free Group의 갯수가 1보다 크면 Segment Header의 block
    Type은 12로 설정된다.
    * V6.0.35 이상에서는 Free Lists 의 관련 정보를 Storage 항에서 표시할 수
    있다.
    ....storage (freelists n freelist groups m)
    장점은 데이타 딕셔너리에 Free List의 정보가 저장 되어진다는 것이다. 즉
    V1 에서 처럼 Free Lists 를 바꾸기 위해 데이타베이스를 Restartup 할
    필요가 없다.
    * V1 에서는 Freelists를 위해 Segment Header인 한 블럭이 할당된다. 그러나 V2
    에서는 각 Free List Group 에 한개의 Free List Block 이 존재한다. 예를
    들어, M=2 이면 Segment Header와 다음 2 block 이 할당 되어지는데 각 블럭은
    Free List Group을 위한 것이다. ( 여기서 M 은 Free Group 이다).
    < Mapping Function 과 Free Space 검색 알고리즘>
    (Mapping Function)
    * Mapping Function은 단순히 Thread Number % Freelist Groups 와 Process
    Number % Process Freelists이다. 예를 들어 M=3,N=5는 3개의 Free List Groups
    와 각각은 5개의 Process Free List 를 가짐을 의미한다.
    1(1 2 3 4 5) 2(1 2 3 4 5) 3(1 2 3 4 5)
    . 임의의 프로세스가 인스턴스 2 에 접속되어 있고 Thread Number는 10 이고
    Process Number는 26 이라고 가정하면 어떤 Freelist 가 할당되어질까?
    이런 경우에는
    10 % 3 = 1
    26 % 5 = 1
    즉, 첫번째 그룹의 첫번째 Prfl 을 선택하게 된다.
    * 만약 인스턴스를 특정한 Freelist Block에 할당하고자 할 때는 init<SID>.ora
    Parameter 인 Instance_number를 이용한다.
    (검색 알고리즘)
    * V6.04 이하에서는 다음 순서를 따른다.
    1. 자신의 Transaction Free List에서 Free List를 찾는다. 찾으면 #7, 아니면
    #2로 간다.
    2. Process Freelist 의 Free Space 를 찾는다. 찾으면 #7, 아니면 #3 으로간다.
    3. Commit된 Txfls를 찾는다. 만일 Commit되지 않은 Txfl Space를 발견하면 #4로
    가고 아니면 각 Commit된 Txfl Space 를 한 Prfl에 할당한다. 만약 Prfl >
    Trfl 이면 어떤 Prfl는 Space를 얻지 못하고 Prfl < Trfl 이면 어떤 Prfl은
    보다 많은 Space를 얻으며 #2 로 간다.
    4. High Water Mark를 Bump Up할 수 없으면 #5로 가고 가능하면 원래대로
    Space를 Prfl에 복사한 후 #2로 간다.
    5. 데이타 딕셔너리에서 fet$를 검색하고 익스텐트를 세그먼트에 할당하고 #4로
    간다. 만일 fet$ 에 Space 가 없으면 #6로 간다.
    6. 에러발생. 테이블스페이스에 더이상 Space 가 없다.
    7. Space 를 사용한다.
    * V6.0.35 이상에서는 다음 순서에 의한다.
    1. 자신의 Transaction Free List에서 Free List를 찾는다. 찾으면 #8, 아니면
    #2 로 간다.
    2. Process Freelist 의 Free Space 를 찾는다. 찾으면 #8, 아니면 #3 으로
    간다.
    3. Master Freelist를 검색한다. 만일 Space를 찾으면 Prfl에 Space의 조각을
    복사하고 #2, 아니면 4로 간다.
    4. Commit된 Txfls를 찾는다. 만일 Commit되지 않은 Txfl Space를 발견하면 #5,
    아니면 각 Commit된 Txfl Space 를 Master Freelist 에 복사하고 #3으로간다.
    5. High Water Mark 를 Bump Up할 수 없으면 #6으로 가고 가능하면 Bump Up하고
    Space를 Prfl 에 복사한 후 #2로 간다.
    6. 데이타 딕셔너리에서 fet$를 검색하고 익스텐트를 세그먼트에 할당하고 #4로
    간다. 만일 fet$ 에 Space 가 없으면 #7로 간다.
    7. 에러 발생 테이블스페이스에 더 이상 Space 가 없다.
    8. Space 를 사용한다.

    Hi sachin22,
    Welcome to the forum! 
    Upon verifying from the Windows Phone Store website, the apps that you mentioned (which are all from XBox) are tagged as paid apps. You can visit the website and search the apps to verify it: windowsphone.com However, aside from these apps, are you able to find other free apps from the Store, like those that are published by Nokia? Also, you installed the free version of these apps via SD card (using XAP app installers), is that right?
    By the way, when you say 'flashing', do you mean recovering the phone's OS using the
    Nokia Software Recovery tool as shown at this link: FAQ's - Nokia Software Recovery tool
    Hope to hear feedback from you soon. 

Maybe you are looking for