Specific range

Hi,
I have acquired some data(Magnitude versus frequency), I want to just select the points which are in specific range(their frequency.....X-axis), for example I want to filter the signal only for the points which are between 20Hz and 30Hz. Does anybody know how can I do that?
I used "In range and coerce", but it gives the "lower limit" for the points which are not in the rang. I don't want it to pick that points.
I'd appreaciate it.
Thanks
Petar
Solved!
Go to Solution.

Hello,
I think you could try using a For Loop instead of the "In Range and Coerce" function. You just input your data into the For Loop, and using a conditional tunnel you can compare the data that you want. I attached a picture of a little example I created for you to see.
Attachments:
Capture.PNG ‏6 KB

Similar Messages

Capture specific range of data in ECC

Dear All;
We have a situation here:
The customer database is huge (more than 1 TERA GB) in Production server, and it is difficult to do client copy of production server database to Test server for the testing/simulation purpose. Cause it will take long time and require large space in QAS server to copy the client from PRD to QAS.
Therefore, l would like to know if there is a tool (SAP or non-SAP) to capture certain range the data (specific range of date) in Production server and place it in the QAS server?
Please advise.
Thanks
Jordan

Dear Udya;
It is the same problem, if we have to do the DB refresh, it will take long downtime to do the DB export for TeraGB database, which customer not quite agreed, and the QAS cannot have the same disk space as the Production, image if we are using the AS400 machine, and we need to have the same disk space as the Production server, it is too costly for the hardware as well as the maintenance cost.
Any other option?
Thanks
Jordan

RQL Query to get the specific range of product items from product catalog.

Hi All,
I need to do the batch wise query to product catalog.
For that i have use Query builder but that is giving me repeated items, now i wanted to use RQL using rqlStatement.
Please help me in solving the issue.
Query which i have used using QueryBuilder.
                RepositoryView productView = productRepo.getView("product");
                QueryBuilder productBuilder = productView.getQueryBuilder();
                Query productQuery = productBuilder.createUnconstrainedQuery();
                RepositoryItems[] productItems = productView.executeQuery(productQuery,startIndex,endIndex);
Can anybody help me in writing RQL Query to get the specific range of product items from product catalog.

Hi Shakuntala,
There is no executeQuery method defined in RqlStatement Interface, which will accept index for output result.
So As far as I know, what u are trying to achieve is not possible with RQL statements OOTB way.U can consider range of results based on some condition from Repository items.
Please let me know if u find any way to implement it.
Above Query builder should always return different ids if range is not overlapping with previous range.
Please verify that repeated items ids are same or different,
Quoting from API docs:
RepositoryItem[] executeQuery(Query pQuery,
                              int pStartingIndex,
                              int pEndingIndex)
                              throws RepositoryException
    Executes the given query and returns an array of matching RepositoryItems, which are contained within a total potential result set. For example used if one wanted to retrieve elements 50-60 from a query which could return 100 elements.
Regards,
Nitin.

How to Delete emails in Specific range on database level (Exchange 2010)

Hi All,
Kindly assist me on deleting emails in specific range. i have exported all users mailbox using this below powershell script and in the same manner can we delete all the emails from users mailboxes in the below date range. Please advise
foreach ($usr in (Get-Mailbox -Database "DB01")) { New-MailboxExportRequest -ContentFilter
{(Received -lt "12/07/2012")} -Mailbox $usr -FilePath \\Server01\DB01_Export\$($usr.Alias).pst・}
Thanks, Venkatesh. "Hardwork Never Fails"

Hello,
You can use search-mailbox cmdlet with -deletecontent switch:
http://technet.microsoft.com/en-us/library/ff459253(v=exchg.141).aspx
http://andersonpatricio.ca/how-to-delete-messages-using-search-mailbox-in-exchange-server-2010/
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

Load Table Data into Excel Specific range

Hi,
I am working with Excel Destination in SSIS, where i have to insert table data into multiple excel sheets with specific range, sheet name same as table name and i should load each table into that particular sheet name in excel.
So Sheet name will decide at run time and i have created one variable to pass complete sheet name (like [DimAge$A16:R1000]) in excel destination, but it is throwing error Here i am facing two complexities
1)Getting error while passing excel sheet name as variable
2) How to insert into excel in specific range of values shown as above.
Ur help in solving this would be appreciated

Hi Naveen,
Based on my research, a worksheet or range is the equivalent of a table or view in Excel. The lists of available tables in the Excel Source and Destination editors display only existing worksheets (identified by the $ sign appended to the worksheet name,
such as Sheet1$) and named ranges (identified by the absence of the $ sign, such as MyRange).
So when you use a variable with [DimAge$A16:R1000] or [Select * from DimAge!A$16:R$1000] value in the Excel Destination, the value acts as a worksheet or range name. But there is no such worksheet or range in the excel file, so the error message occurs.
To fix this issue, please select the cell range in your excel sheet, then right-click the range to define a name for the range to create some ranges with the specific ranges in excel file, then in the "Name of the Excel Sheet" drop down box of
"Excel Destination Editor" you can see that Named range. Then simply select the range from the drop-down list or use a variable with the range name as the Excel Destination.
For more information about how to import data to Excel sheet's specific region, please refer to the following blog:
http://getsetsql.blogspot.in/2012/01/using-ssis-load-data-to-excel-sheet-at.html
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

How do I create a print button to print a specific range of the document.

How do I create a print button to print a specific range of the document. I've found JavaScript to print a specific page, but a range or even multiple ranges. Form is created in Adobe 9 Pro. Any help would be truly appreciated!

Sure, I'll give it a test. Its just that I have a 128 page form that not all of it needs to be printed.
Currently, I have an index page where I want to set up a print button queues per form, however there are several form scattered throughout the document that make up a specific section, but it does not require printing the entire document. Does that make sense?
I did find this JavaScript during my reseach, but have not be able to get it to work.
var pp = event.target.getPrintParams() ;
pp.interactive = pp.constants.interactionLevel.full;
pp.printRange=[[1, 1], [3, 4]];
event.target.print(pp);

Retrieve specific range data from oracle table

Hi, Dear friends,
I want to retrieve all the data from oracle table and then save them to mysql table using JDBC ResultSet. The problem is that some oracle table is too big, if I retrieve all of them to memory at a once time using excuteQuery, the program will become no response out of memory limitation. So my question is if I can retrieve just specific range data once a time. I can¡¯t find this function through JDBC API. Also, I don¡¯t want to use the specific sql sentence, for example ¡°select ¡ from¡ where someid>¡ and someid<¡¡±, because there are many different tables, I want to transfer them automatically. So I can¡¯t construct such sql sentence in advance. Does anyone know if oracle JDBC driver provide such kind of function or does there any other way?
Any suggestion will be greatly appreciated!
Sammy

Dear Justin,
thank you so much for your prompt reply!
as your suggestion, I do check the performance while my program is running, after the program become nearly no response, I found the memory usage is nearly 100%, while disk usage and process usage is pretty low. that's the reason why I guess maybe the memory limitation, but the strange thing is that no any error reported by JBuilder, it just nearly no response and don't transfer any data any more. my os is windows xp, the version of JBuilder is 7. my main memory is 768M. just as you said, the total 6,000 records in not very large, just no more than 400K. another strange thing is that why my program works well when there is little data records in the table.
the big picture of my program is first I retrieve oracle table metadata, according to this information, I construct DDL sql words and then create the corresponding table in mysql database. this part works well. in order to save your time, I will not paste the code here. then there is a method to transfer oracle data to mysql table, whenever creating the mysql table, then I will call this method to transfer datat to it. the following is the code of this method, I am very sorry to take your time. please read it when you are available.
thank you very much!!
Sammy
//transfer data from oracle to mysql!!!
private static void transferData(Connection oracleConn, Connection mysqlConn, String oracleTableName, String oracleSchemaName) throws SQLException{
Statement oracleStmt=oracleConn.createStatement();
Statement mysqlStmt=mysqlConn.createStatement();
// sending sql to oracle to retrieve data
String thisTableName=oracleTableName;
String oracleSQL="SELECT * FROM ".concat(thisTableName);
ResultSet oracleRS = oracleStmt.executeQuery(oracleSQL);
String sql="";
if (oracleRS.next()) {
ResultSetMetaData rsmd = oracleRS.getMetaData();
int colCount = rsmd.getColumnCount();
do {
String sqlBodyPart="";
String sqlValuePart="";
System.out.println("the number of column is "+colCount);
for (int i = 1; i <= colCount; i++) {
String columnValue = oracleRS.getString(i);
boolean b = oracleRS.wasNull();
String columnName =rsmd.getColumnName(i);
System.out.println("the value of column " + i + "is " + columnValue);
//construc the sql body part and value part
sqlBodyPart=sqlBodyPart.concat(" ").concat(columnName).concat(",");
if(b){ //if the value of the column i is null
sqlValuePart=sqlValuePart.concat(" null").concat(",");
}else{
sqlValuePart=sqlValuePart.concat(" '").concat(columnValue).concat("',");
//get rid of the last comma in sqlBodyPart and sqlValuePart
if(!sqlBodyPart.equalsIgnoreCase("")) sqlBodyPart=sqlBodyPart.substring(0,sqlBodyPart.length()-1);
if(!sqlValuePart.equalsIgnoreCase("")) sqlValuePart=sqlValuePart.substring(0,sqlValuePart.length()-1);
//construct the sql sentence!!!
sql="INSERT INTO ".concat(thisTableName).concat(" (").concat(sqlBodyPart).concat(") ").concat(" VALUES(").concat(sqlValuePart).concat(")");
System.out.println("the sql words for this column is");
System.out.println(sql);
System.out.println(" ");
if(mysqlStmt!=null){
int rows = mysqlStmt.executeUpdate(sql);
} else{
System.out.println("can't connect with mysql server");
System.exit(1);
while (oracleRS.next());
} else {
System.out.println("There are no data in the table...");
}//end of method data transfer!
//end of method data transfer!

Specific range of numbers

Hello there,
I have a numeric field, and I would like to enter a specific numbers in this field; numbers between 10 to 40.
How can this be achieved?
Kindly note that I'm new to Livecycle Designer.
Thank you in advance,

On the exit event of the field you woudl have to write code that will check that the user entered a number in that range. Something like this javascript here:
if (this.rawValue < 10 || this.rawValue > 40) {
app.alert("You have entered a number that is outside of the acceptable range. It must be between 10 and 40. Please try again");
xfa.host.setFocus("Insert name of your field here");
Hope that helps
Paul

How do I count numbers within a specific range in a column?

I'm creating a spreadsheet for my college courses where I enter each score from each class as I get them back and it continues to recalculate my grades in each course. Now I'm on the part where I want to make a box that calculates the current GPA for the semester. I know how I'm going to do it already but I need to figure one thing out first. Say my scores are as follows:
85.50%
82.00%
92.35%
94.25%
78.00%
I need a working code that counts the amount of scores within a certain range, say for example, tell me how many scores are between 80.00 and 89.99. I can figure out how many are above/below a certain value (80.00 again for example) with a code like this [scores being the column with the grades]:
=COUNTIF(Scores,">=80.00") ---- this gives me "4" correctly
BUT when I add another value and want it to limit scores to not just being equal to/above 80.00 but also below 90.00 it freaks out. I tried the two following codes:
=COUNTIF(Scores,">=80.00","<90.00")
=COUNTIF(Scores,">=80.00",Scores,"<90.00")
Neither work, i'm sure i'm just wording it wrong. It should obviously spit out the number "2" with there being two B's. Any help would be appreciated!

Jeremy.Osborne wrote:
I have set up a chart just like yours with the intervals (60-100) on the left and on the right I have no idea what to do. Do I enter that code into each box? Right now it looks like:
=INDEX(FREQUENCY(Scores, I have no idea what to put here)
Jeremy,
in my response, I gave you the expression I used to build the frequency table. It was:
=INDEX(FREQUENCY(Data :: A,A),ROW()-1)
If you build a document exactly as the one I illustrated, the same expression will work for you. If you use a different table name, you will have to adjust the reference.
Regarding the COUNTIFS function, you must read carefully the syntax defined in the Function Browser or the Formulas and Functions user guide and follow it to the letter.
Jerry

6500 classic-codec specification ranges

Hello.I have NOKIA 6500 classic and i am very happy with it.I have tvwo questions.
1.is it truth that this model have screen crack problems
2.i want to convert some of my videos to this phone but i dont know what are the codec ranges for audio and video example: AAC: from _____khz to _____khz and bitrates also..Thanks!

More precisely,my question is: what are the maximum settings for resolution and bitrate for audio and video(for crating music videos and transfering them to phone) for my 6500 classic.Thanks

Query to get all the data in specific range

Dear All,
I have a table and having 50 records. So i want to fetch the records from specified range.
Ex:
1. I want to fetch the records from first 1 to 10 records ( range i will pass) or i want to fetch from 20 to 30 records.
Please help regarding that

YKING wrote:
Dear Thanks for replying,
i want to display the first 10 records/display the between 20 to 30 range records (from 20 th records to 30 th records). I m using below query one is working but another is not working. pelase advise what wrong with one which is not working
Not working :-
select rownum , b.*
from
(select rownum, a.* from table_name a
order by colum1) b
where rownum between &a and &b
working :-
select *
from (select rownum rn, a.*
from table_name a
order by vesl_master_num)
where rn between &s and &q;What's wrong with the one that is not working ... ok...
You are using "rownum" which is a psuedo column assigned to the returned rows. So if row 1 is not returned then there will never be a rows 2, 3, 4 etc. so you can't say you want e.g. rownum between 10 and 20 because rows 1 to 9 haven't been returned, so there's no such things as a row 10,11,12 etc.
In the query that's working you've kind of captured the rownum for all the rows and then you can restrict it. However, the ordering of the data still isn't right in that last example, because the ordering takes place after the rownum is assigned.
So what you really want is...
select *
from (select rownum rn, a.*
from table_name a
order by vesl_master_num)
where rn between &s and &q;which applies the ordering first, then applies the row numbers outside that, and then restricts to certain row numbers outside that.

Best practice for having an access point giving out only a specific range

Hey All,
I have an access point which is currently set to relay all dhcp request to the server DC-01, However the range that has been setup is becoming low on available IP addresses so I have been asked if it is possible to setup another range for the AP only.
Is there a way to set the DHCP up with a new range and say anything from that access point it will then give out a 192.168.2 subnet address as apposed to the standard 192.168.1 subnet?
Or would it be easier / better to create a superscope? and slowly migrate the users to a new subnet with a larger range?
Any help suggestions would be appreciated
thanks
Anthony

Hi,
Maybe we could configure a DHCP superscope to achieve your target.
For details, please refer to the following articles.
Configuring a DHCP Superscope
http://technet.microsoft.com/en-us/library/dd759168.aspx
Create a superscope to solve the problem of dwindling IP addresses
http://www.techrepublic.com/article/create-a-superscope-to-solve-the-problem-of-dwindling-ip-addresses/
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

HP CP3525dn will not print a specific range of pages

Our Color HP Printer model# CP3525dn will not print a range of pages within a MS Word document HELP

Hi,
Microsoft has released an Hotfix which should address such an issue.
Install the Hotfix below and check for any difference:
http://support.microsoft.com/kb/3000461/en-us
Please let me know if that help getting the problem resolved.
Regards
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Different picture to be displayed for a specific range of values in waveform chart

Hello there!
I'm making a VI that is like a rainfall meter reader that displays an image of what will happen with a place with that amount of rain and will display a message (which will show on the string). Here is a picture of the FP.
The mm of rain control will be the input and it will be displayed in the graph. The Boolean Controls in the other side will light up which is dependent on the value of the input. What I want to do is that I want to display an image (which will show on the Flood Hazard Map tab) and a sentence on a string (which will show on the Additional Announcement tab) for every boolean control. The images and the sentence on the string is different for every boolean control. For example, if the input is 7.5, the Normal Alert LED will light up and at the same time, I want to display an image and a message on a string. Here is the BD.
I can't run the VI because there are more than one source in the string and in the path part. Also, I don't know what will I put in the False statement in the Case Structure. Also, I'm not really sure if putting the the Case Structure for each is right.
Help is really appreciated (because this is my problem for almost 2 weeks now). Thank you very very much.
I really wish to become an Electronics Engineer before I'm 21.
Been 1 year in LabVIEW but still a beginner.
Solved!
Go to Solution.
Attachments:
tralala2.vi ‏34 KB

I haven't the toolkit but I think you juste have to do this and put the good picture (or you juste make a pictures selector, like a table that you can find in the vision fonctions).
Attachments:
tralala2 (1).vi ‏28 KB

Getting a specific range name

hi ,
i am using Oracle 9i ,
i want to retrieve records as follows
start from S-A% to S-Y%
how do i do that in 9i , 10G there's regular expression
pls advise
tks & rgds

where str like 'S-%'
ans substr(str,3,1) between 'A' and 'Y'

Specific range

Similar Messages

Maybe you are looking for