"Specify filter names" error in BADI Implementation

Hi everyody,
I am trying to create a BADI Implementation for the standard badi BADI_LAYER in SE19. When I try to save this, it gives an error saying "Specify filter names".
Can somebody kindly tell me what this problem is and how I can fix it?
Thanks,
Max

Hi Max,
You need to enter a BADI definition as filter value in the Properties Tab
PLease refer the following link for more details.
http://www.erpgenie.com/index.php?option=com_content&task=view&id=462&Itemid=77
Reward points for useful answers.

Similar Messages

How to change the name of a BADI Implementation?

Hello experts,
Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
Thanks in advance,
AK

Hi,
Please go to transaction SE19, enter your implementation name.
Then go to menu: Implementation -> Rename -> ...
Regards,
Ferry Lianto

EEWB error message BADI implementation

Hi,
I am getting the following error message when I run the wizard in EEWB to create new fields:
Task CRM_BTX_ADD_NEW_FIELDS
creating of BADI Implementation "ZCRM_RF_0701" failed
I am trying to add new fields in Activities.
This system is a copy of production client. There is no EEWB project or extension created in this system. We are using this system as a sandbox. We wanted to create some new fields here in this system by crating a new project and extension but when I run the wizard to create the new fields it is giving me the above error message at the time of Generation
Anyone has any idea how to resolve this ?
Thanks
Sub
Edited by: Kolla Subrahmanyam on Jan 9, 2012 3:51 PM

Resolved the issue myself. Its the problem with the workbench request i was using.
Thanks
Sub

Populating the error message (BAdI implementation)

Hi there,
I have a BAdI to implement <b>CRM_ORDERADM_H_BADI</b> where it will check certain header data. If there is a certain condition that is met, we must not allow the transaction to continue by adding error message on the top (the red button). How can we populate this error log within the BAdI implementation (putting it in codes in the <i>method </i>of the BAdI implementation).
Many thanks in advance,
Regards,
MuJi
Message was edited by: Muji.net

Hello,
Use CRM_MESSAGE_COLLECT to add your message, CRM_MESSAGE_DELETE to delete the old message from the log.
example :
DATA:
lv_objnr               TYPE crm_jest-objnr,
ls_msgidno             TYPE bal_s_idno,
lt_msgidno             TYPE bal_r_idno,
lv_dummy_message       TYPE c.
**Delete message(s)
ls_msgidno-sign       = 'I'.
ls_msgidno-option     = 'EQ'.
ls_msgidno-low-msgid = Z01'.
ls_msgidno-low-msgno = '014'.
APPEND ls_msgidno TO lt_msgidno.
lv_objnr = iv_item_guid.
CALL FUNCTION 'CRM_MESSAGES_DELETE'
    EXPORTING
      it_r_msgidno   = lt_msgidno
      iv_ref_object = lv_objnr
      iv_caller_name = gc_object_name-customer_i.
    IF SY_SUBRC NE 0.
*In the error case, collect the message:
      MESSAGE e014(Z01) INTO lv_dummy_message.
      CALL FUNCTION 'CRM_MESSAGE_COLLECT'
        EXPORTING
          iv_caller_name = gc_object_name-customer_i
          iv_ref_object = lv_objnr.
    ENDIF.
Regards,
Frédéric

More than one filter in a BAdi implementation

Hi Experts,
   Is it possible to have more than one filter value for one BAdi implementation?
   Or should I create separate implementation for every filter value?
   I tried creating second filter in an existing BAdi implementation and it is not allowing.
Thanks and regards,
Venkat.

Hi,
I agree with Sandeep.
You can create n number of filter values according to the bussiness need.
Thanks
Arbind

BADI implementation in ECC 6.0

I want to put a validation when changing business partner details using tcode BP but it seems there no user exists but BADIs but the BADIs that i am getting i think can only be used after the update has taken place. i have BADI ADDRESS_UPDATE and i need to know ho i can implement it in ECC 6.0. I tried SE18 but its saying "Create" operation is possible only for enhancement spots. how best can implement it

Hi Willard,
Identify ur enhancement spot. Go to SE18, give the enhancement spot name and display.
You can see your BADI in that spot. Click on the button 'Implement Enhancement Spot (F6)'.
Give a name for your enhancement implementation, select ur badi to be implemented in that spot. Give proper name to ur badi implementation.You can now put ur code in that implementation.
Check this blog of Thomas Weiss.
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
It clearly explains how you can implement BADI of an enhancement spot in ECC 6.0
Regards,
Soumya.
Edited by: Soumya Jose on Feb 5, 2009 2:14 PM

BAdI implementation FIAA_BW_DELTA_UPDATE inactive in source system DEV

Hi all.
I'm trying to execute an infopackage to get 0ASSET (texts delta initialization). But it shows me the next error message: "BAdI implementation FIAA_BW_DELTA_UPDATE inactive in source system DEV".
But when I look at this BADI implementation in the source system (Transaction code se19) there are no errors on it.
"BAdI implementation FIAA_BW_DELTA_UPDATE does not contain any errors".
Do somebody knows what's happenning?

Hi,
If you are in version 3.1, then this BADI has an issue.
Kindly refer to the following note:
[SAP Note 590034 Deactivating implementation FIAA_BW_DELTA_UPDATE|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d353930303334%7d]
Cheers...

How to find Badi implementation class & Interface

Hi Experts,
I want to get Badi implementation class name and interface name by passing badi implementation name.
Is there any function module to find out??
Thanks and regards,
Venkat.

Hi Venkat,
First call the method CL_EXITHANDLER=>GET_INSTANCE by passing the BADI definition name in the EXIT_NAME parameter. Whatever you get back in the INSTANCE parameter --- just pass it through the INSTANCE parameter of CL_EXITHANDLER=>GET_CLASS_NAME_BY_INTERFACE method and you will get back implementation class name in the parameter CLASS_NAME.
For reference on how to use these methods, see the where used list for these methods which are most commonly used in all the standard SAP programs where BADI is called.
Cheers
Suresh

Error saving a BADI Implementation

I am creating a BADI Implementation using SE19. I select Classic BADI, Enter Name RSR_OLAP_BADI and supply required information. When I save, it asks me for a package name. If I use $TMP, I get error
u201CTest Objects Cannot be created in Foreign Namespaceu201D. If I specify some other package name, I get error package does not exist. How can I create a Package and what should be its name.
Thanks a lot.

Hi,
Two things here -
1. Have you given the implementation name for your BADI? This should be something starting with Z. Follow the below steps -
TCode SE19:
Create Implementation - Select Classic BAdi and give BAdi name as RSR_OLAP_BADI.
Then click on Create Implementation.
Then In the Pop Up give the Implementation Name as Z* (starting with Z) and click on Continue.
2. You can create a package using transaction SE80. Give the package name starting with Z.
Hope this helps!
Regards,
Saurabh

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'

We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information.

"Bad Applet class name" error while recording on Oracle Forms 11g through OpenScript (JRE 1.7.0_17)

Hi,
I am trying to record automation functional test script on Oracle Forms 11g using OpenScript.
Able to open the browser, but after accessing application URL, getting application error as "Bad Applet class name"
Java Plug-in 10.17.2.02
Using JRE version 1.7.0_17-b02 Java HotSpot(TM) Client VM
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
SSV dialog is suppressed........
cracked oracle.forms.engine.Main
Loading cached Forms Jars ...
Is this version (Oracle forms 11g, JRE 1.7.0_17) supported by OATS-OpenScript ?
Please advise if there is any work around here.
Thanks.

From the last OATS release notes available in the C:\OracleATS\docs directory:
4.1 Oracle Functional Testing/OpenScript
Oracle Functional Testing’s OpenScript scripting platform has the following system
requirements:
■ Operating System (32-bit and 64-bit versions): Windows XP, Windows Vista,
Windows 2003, Windows 7, Windows 2008, Windows 2008 R2.
■ Memory: Minimum 1 GB
■ System: x86, 32-bit or 64-bit processor, 2.6 GHz or faster
■ Disk Space: 4 GB minimum
■ Browser: Internet Explorer 7.x, 8.x., 9.x; Firefox 3.5/3.6, 6.x, 10; Chrome 27+
(playback only).
■ Java Runtime Environment: JRE 1.6 minimum (up to build 38), JRE 1.7 (up to build
11) .
So basically, it's not supported... Can you try with another JRE version?
As always don't forget to run OpenScript as administrator on W7/8 or equivalent
JB

BMR-SS backup fails with error "the specified network name is no longer available"

We are running DPM 2012 SP1 on a Windows Server 2008 R2 system, backing up a Windows Server 2012 system that is a DC. The agent version is 4.1.3417.0. Both the DPM server and the DC are physical systems - brand new HP Proliant 360's.
When creating the replicas for the 2012 server the first time, the backups work fine, and then for a day or so after that. After a couple of days, the BMR-SS backups fail with the error "the specified network name is no longer available".
I can watch the backup happening in the Windows Server Backup console on the protected server - the BMR backup goes up to 99% and then fails. BMR backups on all the other servers are working - we have a mix of Win2008R2 and Win2012.
Here is what I have tried:
I can connect to the UNC path on the backup server without a problem during and after the backup is happening.
Tried reinstalling the DPM agent.
Tried backing up directly from the protected server to another server's network share, which worked.
I can copy multiple gigabyte files directly from the protected server to the DPM file share without a problem (the same one that DPM uses for the replica)
Tried turning off the SCEP real-time protection during the backup.
Any help would be appreciated - thanks.
KW

llo Boudewijn
I followed Boudewijn's suggestion.
The Windows 2012R2 servers had no recovery partition in disk C. I created one (400MB) following http://support.microsoft.com/kb/2930294/en-us and
DPM system restore worked. But just once.
So this is not the solution to the problem......
Is no one else having issues with DPM bare metal protection of Windows 2012R2 servers?

Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
Thanks

Hello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter

Error:"The specified tag name was not found"

Hello:
My problem is the FieldPoint error message in LabWindows/CVI v6.0.
When hook up with Ethernet module(FP-1600), NO Problem on the source code, specially item Name "All". See the actual code.
if(status = FP_CreateTagIOPoint (ServerHandle, resourceName, deviceName, "All",&IOPointHandle))
But When hook up with RS-232C Module(FP-1000), occured error. The error code is 32812, that means "The Specified tag name was not found."
What makes this error? Why item name "All" makes the error when using FP-1000?
Please help me.
Thank You.

Make sure the resourceName and deviceName match what is in FieldPoint Explorer. See the following KB:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
Also, I have seen this error when targetting serial modules with FieldPoint Explorer open. Make sure FP Explorer is closed.

"Specify filter names" error in BADI Implementation

Similar Messages

Maybe you are looking for