Specify SQL Server Port During Setup
I am installing ConfigMgr 2012 R2 in an environment that requires remote SQL. In addition, the remote SQL uses a custom port and does not run the SQL Browser service.
Is there a way to specify the SQL Server port during setup? I know I can specify the port for the SQL Service Broker, but I need to specify the port for the SQL Server instance itself.
Any insight/experiences are greatly appreciated!
Thanks,
Jeff
You will need to change the port in SQL Server Network Configuration
See this technet documentation : https://technet.microsoft.com/library/ms177440.aspx
Benoit Lecours | Blog: System Center Dudes
Similar Messages
-
Setup cannot connect to the specified SQL Server instance
On a clean install domain member (Windows 2012), I am trying to setup System center 2012 VMM:
1. I installed the prerequisites as instructed during the pre-setup phase of the installation then rebooted the server (SQL Server 2012 was installed and services seem to be all started properly and SQL Configuration Manager starts as well).
2. After reboot, logged again with domain admin account and Windows update installed right away SP1 for SQL server 2012. Then I rebooted again.
3. Restarted the installation process and left default values. At the "Database configuration" step, I am leaving everything by default as well and I am getting error: "Setup cannot connect to the specified SQL Server instance. Ensure that
the server name..."
4. Tried different credentials, tried using port 1433 with no effect.
Am I missing something????
Thanks.
BenjilafouineDefinitely be sure to connect with the "ServerName\InstanceName,PortNumber". If you don't reference a port number it will try 1433 and then will connect via a dynamic port number. It is best in my opinion to always specify a specific port for each instance
to listen on in the SQL Server Configuration Manager so that you can open the fewest number of ports in the Windows firewall. -
Cannot connect to the specified SQL Server instance
I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
I am getting the following error:
Setup cannot connect to the specified SQL Server instance.
Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
I have installed the
Microsoft® SQL Server® 2008 R2 Command Line Utilities
but have not set up any SQL Server instances.
how should i proceed?
Edit:
The followign fields are configured:
Server Name: The name of the machine i am using
Port: <empty>
Use the following credentials <NOT ticked>
Instance name <empty> (the drop down is empty)
New Database <Ticked> : VirtualManagerDBIs SQL server is properly installed on the system?
Are you able to connect with SQL server instance?
As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
http://technet.microsoft.com/en-us/library/gg610656.aspx
Hope it help!
Please click the Mark as answer button and vote as helpful if this reply solves your problem -
SQL Server 2008 Express Setup Issue SKU
Hi,
a configuration file driven setup worked on roughly 30 machines without problems.
However, on one certain machine (which is costumer owned in Saudi Arabia) the installation seems to
be blocked at an early stage. Logfiles reporting something about "SKU", but this makes not clear for me
what the problem is.
The Summary.txt is pasted, below this Details.txt is placed (the bottom part which contains the error portion).
Thanks for help in advance!
Peter
Summary.txt
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -213508975
Exit facility code: 838
Exit error code: 7313
Exit message: sku
Start time: 2013-11-14 19:00:59
End time: 2013-11-14 19:03:07
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.2531.0%26EvtType%3d0xC16B698F%400x6AD84D9E
Machine Properties:
Machine name: F950DS1
Machine processor count: 4
OS version: Windows Vista
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1031 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1031 Express Edition 10.1.2531.0 No
Sql Server 2008 GESTRAVKP4030 MSSQL10.GESTRAVKP4030 Database Engine Services
1033 10.1.2531.0
No
Sql Server 2008 GESTRAVKP4030 MSSQL10.GESTRAVKP4030 Database Engine Services
1031 10.1.2531.0
No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
Installation location: C:\Users\Administrator\Desktop\VKP30\MSSql2008ExpressSP1\X86\x86\setup\
Installation edition: Invalid
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Users\Administrator\Desktop\VKP30\MSSql2008ExpressSP1\X86\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: True
ERRORREPORTING: False
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: True
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: GESTRAVKP4030
INSTANCENAME: GESTRAVKP4030
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PCUSOURCE: C:\Users\Administrator\Desktop\VKP30\MSSql2008ExpressSP1\X86\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.ArgumentException
Message:
sku
Data:
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.InstallFeatureEdition..ctor(ServiceContainer context, SqlEdition sku, String instanceName)
at Microsoft.SqlServer.Configuration.InstallFeatureTree..ctor(ServiceContainer context)
at Microsoft.SqlServer.Configuration.InstallWizard.InstallFeatureTreeController.LoadFeatureTree()
at Microsoft.SqlServer.Configuration.InstallWizard.InstallFeatureTreeController.Initialize()
at Microsoft.SqlServer.Configuration.InstallWizardFramework.ConfigurationController.Microsoft.SqlServer.Configuration.InstallWizardFramework.ISettingStoreSite.SetSettingStore(SettingStore store)
at Microsoft.SqlServer.Configuration.InstallWizardFramework.InstallWizardPageHost.SiteObject(Object pageController)
at Microsoft.SqlServer.Configuration.InstallWizardFramework.InstallWizardPageHost.CreatePageController(Type type)
at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.EnsurePageControllerExists()
at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.CreateView()
at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.get_Control()
at Microsoft.SqlServer.Configuration.WizardFramework.HostControl.OnSelectedPageChanged(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.OnSelectedPageChanged()
at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.set_SelectedPageIndex(Int32 value)
at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.GoNext()
at Microsoft.SqlServer.Configuration.WizardFramework.NavigationButtons.nextButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Detail.txt
2013-11-14 19:01:44 Slp: -- SkuPublicConfigObject : Calling SkuPublicConfigObject.Calculate.
2013-11-14 19:01:44 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2013-11-14 19:01:44 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2013-11-14 19:01:44 Slp: Sco: Attempting to get registry value SharedCode
2013-11-14 19:01:44 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2013-11-14 19:01:44 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10.GESTRAVKP4030\Setup
2013-11-14 19:01:44 Slp: Sco: Attempting to get registry value ProductID
2013-11-14 19:01:44 Slp: Sco: Attempting to get registry value DigitalProductID
2013-11-14 19:01:44 Slp: -- SkuPublicConfigObject : Using edition 'Invalid' from existing instance 'GESTRAVKP4030'.
2013-11-14 19:01:44 Slp: SLP: GetDiskCostByProductFeatures: mapped to 3 target directories
2013-11-14 19:01:44 Slp: SLP: GetDiskCostByProductFeatures: Target Directory is "SYSTEMDRIVE"; Disk Cost: "121559"kb
2013-11-14 19:01:44 Slp: SLP: GetDiskCostByProductFeatures: Target Directory is "INSTALLSHAREDDIR"; Disk Cost: "132"kb
2013-11-14 19:01:44 Slp: SLP: GetDiskCostByProductFeatures: Target Directory is "INSTANCEDIR"; Disk Cost: "181258"kb
2013-11-14 19:01:44 Slp: Sco: Attempting to get directory information for path C:\Program Files\Microsoft SQL Server\
2013-11-14 19:01:44 Slp: Sco: Attempting to get directory information for path C:\Program Files\Microsoft SQL Server\
2013-11-14 19:01:44 Slp: Sco: Attempting to get directory information for path C:\Program Files\Microsoft SQL Server\
2013-11-14 19:01:44 Slp: Sco: Attempting to get directory information for path C:\Program Files\Microsoft SQL Server\
2013-11-14 19:01:44 Slp: Error: Action "GatherUserSettings" threw an exception during execution.
2013-11-14 19:01:44 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Thread was being aborted. ---> System.Threading.ThreadAbortException: Thread was being aborted.
2013-11-14 19:01:44 Slp: at System.Threading.WaitHandle.WaitOneNative(SafeHandle waitableSafeHandle, UInt32 millisecondsTimeout, Boolean hasThreadAffinity, Boolean exitContext)
2013-11-14 19:01:44 Slp: at System.Threading.WaitHandle.InternalWaitOne(SafeHandle waitableSafeHandle, Int64 millisecondsTimeout, Boolean hasThreadAffinity, Boolean exitContext)
2013-11-14 19:01:44 Slp: at System.Threading.WaitHandle.WaitOne(Int32 millisecondsTimeout, Boolean exitContext)
2013-11-14 19:01:44 Slp: at System.Threading.WaitHandle.WaitOne()
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2013-11-14 19:01:45 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2013-11-14 19:01:45 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2013-11-14 19:01:45 Slp: --- End of inner exception stack trace ---
2013-11-14 19:01:45 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2013-11-14 19:01:45 Slp: Received request to add the following file to Watson reporting: C:\Users\Administrator\AppData\Local\Temp\tmp5718.tmp
2013-11-14 19:01:45 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2013-11-14 19:01:45 Slp: Inner exceptions are being indented
2013-11-14 19:01:45 Slp:
2013-11-14 19:01:45 Slp: Exception type: System.ArgumentException
2013-11-14 19:01:45 Slp: Message:
2013-11-14 19:01:45 Slp: sku
2013-11-14 19:01:46 Slp: Stack:
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallFeatureEdition..ctor(ServiceContainer context, SqlEdition sku, String instanceName)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallFeatureTree..ctor(ServiceContainer context)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizard.InstallFeatureTreeController.LoadFeatureTree()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizard.InstallFeatureTreeController.Initialize()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizardFramework.ConfigurationController.Microsoft.SqlServer.Configuration.InstallWizardFramework.ISettingStoreSite.SetSettingStore(SettingStore
store)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizardFramework.InstallWizardPageHost.SiteObject(Object pageController)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizardFramework.InstallWizardPageHost.CreatePageController(Type type)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.EnsurePageControllerExists()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.CreateView()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.get_Control()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.HostControl.OnSelectedPageChanged(Object sender, EventArgs e)
2013-11-14 19:01:46 Slp: at System.EventHandler.Invoke(Object sender, EventArgs e)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.OnSelectedPageChanged()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.set_SelectedPageIndex(Int32 value)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.GoNext()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.NavigationButtons.nextButton_Click(Object sender, EventArgs e)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.OnClick(EventArgs e)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Button.OnClick(EventArgs e)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.WndProc(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.ButtonBase.WndProc(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Button.WndProc(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
2013-11-14 19:02:13 Slp: Watson Bucket 1
Original Parameter Values
2013-11-14 19:02:13 Slp: Parameter 0 : SQL2008@RTM@
2013-11-14 19:02:13 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.InstallFeatureEdition..ctor
2013-11-14 19:02:13 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.InstallFeatureEdition..ctor
2013-11-14 19:02:13 Slp: Parameter 3 : System.ArgumentException@-2147024809
2013-11-14 19:02:13 Slp: Parameter 4 : System.ArgumentException@-2147024809
2013-11-14 19:02:13 Slp: Parameter 5 : GatherUserSettings
2013-11-14 19:02:13 Slp:
Final Parameter Values
2013-11-14 19:02:13 Slp: Parameter 0 : SQL2008@RTM@
2013-11-14 19:02:13 Slp: Parameter 1 : 0xC16B698F
2013-11-14 19:02:13 Slp: Parameter 2 : 0xC16B698F
2013-11-14 19:02:13 Slp: Parameter 3 : 0x6AD84D9E
2013-11-14 19:02:14 Slp: Parameter 4 : 0x6AD84D9E
2013-11-14 19:02:14 Slp: Parameter 5 : GatherUserSettings
2013-11-14 19:02:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2013-11-14 19:02:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2013-11-14 19:02:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2013-11-14 19:02:22 Slp: sku
2013-11-14 19:02:23 Slp: Watson bucket for exception based failure has been created
2013-11-14 19:02:23 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2013-11-14 19:02:23 Slp: Sco: Attempting to open registry subkey
2013-11-14 19:02:23 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
2013-11-14 19:02:23 Slp: Sco: Attempting to get registry value DW0200
2013-11-14 19:03:07 Slp: Submitted 1 of 1 failures to the Watson data repository
2013-11-14 19:03:12 Slp:
2013-11-14 19:03:12 Slp: ----------------------------------------------------------------------
2013-11-14 19:03:12 Slp:
2013-11-14 19:03:12 Slp: Error result: -213508975
2013-11-14 19:03:12 Slp: Result facility code: 838
2013-11-14 19:03:12 Slp: Result error code: 7313Hi,
a configuration file driven setup worked on roughly 30 machines without problems.
However, on one certain machine (which is costumer owned in Saud Arabia) the installation seems to
be blocked at an early stage. Logfiles reporting something about "Invalid edition ... SKU", but it not clear for me
what the problem is.
The Summary.txt is shown here, below this I will paste Details.txt (the bottom part which contains the error portion).
Thanks for help in advance!
Peter
Summary.txt
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -213508975
Exit facility code: 838
Exit error code: 7313
Exit message: sku
Start time: 2013-11-14 19:00:59
End time: 2013-11-14 19:03:07
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.2531.0%26EvtType%3d0xC16B698F%400x6AD84D9E
Machine Properties:
Machine name: F950DS1
Machine processor count: 4
OS version: Windows Vista
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1031 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1031 Express Edition 10.1.2531.0 No
Sql Server 2008 GESTRAVKP4030 MSSQL10.GESTRAVKP4030 Database Engine Services
1033 10.1.2531.0
No
Sql Server 2008 GESTRAVKP4030 MSSQL10.GESTRAVKP4030 Database Engine Services
1031 10.1.2531.0
No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
Installation location: C:\Users\Administrator\Desktop\VKP30\MSSql2008ExpressSP1\X86\x86\setup\
Installation edition: Invalid
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Users\Administrator\Desktop\VKP30\MSSql2008ExpressSP1\X86\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: True
ERRORREPORTING: False
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: True
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: GESTRAVKP4030
INSTANCENAME: GESTRAVKP4030
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PCUSOURCE: C:\Users\Administrator\Desktop\VKP30\MSSql2008ExpressSP1\X86\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.ArgumentException
Message:
sku
Data:
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.InstallFeatureEdition..ctor(ServiceContainer context, SqlEdition sku, String instanceName)
at Microsoft.SqlServer.Configuration.InstallFeatureTree..ctor(ServiceContainer context)
at Microsoft.SqlServer.Configuration.InstallWizard.InstallFeatureTreeController.LoadFeatureTree()
at Microsoft.SqlServer.Configuration.InstallWizard.InstallFeatureTreeController.Initialize()
at Microsoft.SqlServer.Configuration.InstallWizardFramework.ConfigurationController.Microsoft.SqlServer.Configuration.InstallWizardFramework.ISettingStoreSite.SetSettingStore(SettingStore store)
at Microsoft.SqlServer.Configuration.InstallWizardFramework.InstallWizardPageHost.SiteObject(Object pageController)
at Microsoft.SqlServer.Configuration.InstallWizardFramework.InstallWizardPageHost.CreatePageController(Type type)
at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.EnsurePageControllerExists()
at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.CreateView()
at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.get_Control()
at Microsoft.SqlServer.Configuration.WizardFramework.HostControl.OnSelectedPageChanged(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.OnSelectedPageChanged()
at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.set_SelectedPageIndex(Int32 value)
at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.GoNext()
at Microsoft.SqlServer.Configuration.WizardFramework.NavigationButtons.nextButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Detail.txt
2013-11-14 19:01:44 Slp: -- SkuPublicConfigObject : Calling SkuPublicConfigObject.Calculate.
2013-11-14 19:01:44 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2013-11-14 19:01:44 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2013-11-14 19:01:44 Slp: Sco: Attempting to get registry value SharedCode
2013-11-14 19:01:44 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2013-11-14 19:01:44 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10.GESTRAVKP4030\Setup
2013-11-14 19:01:44 Slp: Sco: Attempting to get registry value ProductID
2013-11-14 19:01:44 Slp: Sco: Attempting to get registry value DigitalProductID
2013-11-14 19:01:44 Slp: -- SkuPublicConfigObject : Using edition 'Invalid' from existing instance 'GESTRAVKP4030'.
2013-11-14 19:01:44 Slp: SLP: GetDiskCostByProductFeatures: mapped to 3 target directories
2013-11-14 19:01:44 Slp: SLP: GetDiskCostByProductFeatures: Target Directory is "SYSTEMDRIVE"; Disk Cost: "121559"kb
2013-11-14 19:01:44 Slp: SLP: GetDiskCostByProductFeatures: Target Directory is "INSTALLSHAREDDIR"; Disk Cost: "132"kb
2013-11-14 19:01:44 Slp: SLP: GetDiskCostByProductFeatures: Target Directory is "INSTANCEDIR"; Disk Cost: "181258"kb
2013-11-14 19:01:44 Slp: Sco: Attempting to get directory information for path C:\Program Files\Microsoft SQL Server\
2013-11-14 19:01:44 Slp: Sco: Attempting to get directory information for path C:\Program Files\Microsoft SQL Server\
2013-11-14 19:01:44 Slp: Sco: Attempting to get directory information for path C:\Program Files\Microsoft SQL Server\
2013-11-14 19:01:44 Slp: Sco: Attempting to get directory information for path C:\Program Files\Microsoft SQL Server\
2013-11-14 19:01:44 Slp: Error: Action "GatherUserSettings" threw an exception during execution.
2013-11-14 19:01:44 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Thread was being aborted. ---> System.Threading.ThreadAbortException: Thread was being aborted.
2013-11-14 19:01:44 Slp: at System.Threading.WaitHandle.WaitOneNative(SafeHandle waitableSafeHandle, UInt32 millisecondsTimeout, Boolean hasThreadAffinity, Boolean exitContext)
2013-11-14 19:01:44 Slp: at System.Threading.WaitHandle.InternalWaitOne(SafeHandle waitableSafeHandle, Int64 millisecondsTimeout, Boolean hasThreadAffinity, Boolean exitContext)
2013-11-14 19:01:44 Slp: at System.Threading.WaitHandle.WaitOne(Int32 millisecondsTimeout, Boolean exitContext)
2013-11-14 19:01:44 Slp: at System.Threading.WaitHandle.WaitOne()
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
2013-11-14 19:01:44 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2013-11-14 19:01:45 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2013-11-14 19:01:45 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2013-11-14 19:01:45 Slp: --- End of inner exception stack trace ---
2013-11-14 19:01:45 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2013-11-14 19:01:45 Slp: Received request to add the following file to Watson reporting: C:\Users\Administrator\AppData\Local\Temp\tmp5718.tmp
2013-11-14 19:01:45 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2013-11-14 19:01:45 Slp: Inner exceptions are being indented
2013-11-14 19:01:45 Slp:
2013-11-14 19:01:45 Slp: Exception type: System.ArgumentException
2013-11-14 19:01:45 Slp: Message:
2013-11-14 19:01:45 Slp: sku
2013-11-14 19:01:46 Slp: Stack:
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallFeatureEdition..ctor(ServiceContainer context, SqlEdition sku, String instanceName)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallFeatureTree..ctor(ServiceContainer context)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizard.InstallFeatureTreeController.LoadFeatureTree()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizard.InstallFeatureTreeController.Initialize()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizardFramework.ConfigurationController.Microsoft.SqlServer.Configuration.InstallWizardFramework.ISettingStoreSite.SetSettingStore(SettingStore
store)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizardFramework.InstallWizardPageHost.SiteObject(Object pageController)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.InstallWizardFramework.InstallWizardPageHost.CreatePageController(Type type)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.EnsurePageControllerExists()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.CreateView()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.PageHost.get_Control()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.HostControl.OnSelectedPageChanged(Object sender, EventArgs e)
2013-11-14 19:01:46 Slp: at System.EventHandler.Invoke(Object sender, EventArgs e)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.OnSelectedPageChanged()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.set_SelectedPageIndex(Int32 value)
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.UIHost.GoNext()
2013-11-14 19:01:46 Slp: at Microsoft.SqlServer.Configuration.WizardFramework.NavigationButtons.nextButton_Click(Object sender, EventArgs e)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.OnClick(EventArgs e)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Button.OnClick(EventArgs e)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.WndProc(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.ButtonBase.WndProc(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Button.WndProc(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
2013-11-14 19:01:46 Slp: at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
2013-11-14 19:02:13 Slp: Watson Bucket 1
Original Parameter Values
2013-11-14 19:02:13 Slp: Parameter 0 : SQL2008@RTM@
2013-11-14 19:02:13 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.InstallFeatureEdition..ctor
2013-11-14 19:02:13 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.InstallFeatureEdition..ctor
2013-11-14 19:02:13 Slp: Parameter 3 : System.ArgumentException@-2147024809
2013-11-14 19:02:13 Slp: Parameter 4 : System.ArgumentException@-2147024809
2013-11-14 19:02:13 Slp: Parameter 5 : GatherUserSettings
2013-11-14 19:02:13 Slp:
Final Parameter Values
2013-11-14 19:02:13 Slp: Parameter 0 : SQL2008@RTM@
2013-11-14 19:02:13 Slp: Parameter 1 : 0xC16B698F
2013-11-14 19:02:13 Slp: Parameter 2 : 0xC16B698F
2013-11-14 19:02:13 Slp: Parameter 3 : 0x6AD84D9E
2013-11-14 19:02:14 Slp: Parameter 4 : 0x6AD84D9E
2013-11-14 19:02:14 Slp: Parameter 5 : GatherUserSettings
2013-11-14 19:02:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2013-11-14 19:02:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2013-11-14 19:02:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20131114_185940\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2013-11-14 19:02:22 Slp: sku
2013-11-14 19:02:23 Slp: Watson bucket for exception based failure has been created
2013-11-14 19:02:23 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2013-11-14 19:02:23 Slp: Sco: Attempting to open registry subkey
2013-11-14 19:02:23 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
2013-11-14 19:02:23 Slp: Sco: Attempting to get registry value DW0200
2013-11-14 19:03:07 Slp: Submitted 1 of 1 failures to the Watson data repository
2013-11-14 19:03:12 Slp:
2013-11-14 19:03:12 Slp: ----------------------------------------------------------------------
2013-11-14 19:03:12 Slp:
2013-11-14 19:03:12 Slp: Error result: -213508975
2013-11-14 19:03:12 Slp: Result facility code: 838
2013-11-14 19:03:12 Slp: Result error code: 7313 -
Firewall issue with centralized SQL server - port 52384
Hi,
I have dedicated, centralized MS SQL 2012 server for our internal infrastructure with few instances. There is dedicated named instance SC for SC Family Products running on TCP port 1435. Also Server Browser running on UDP 1434 is enabled. I'm trying to install
SCOM 2012 R2. I got to the step Configure the Operational Database and here, I encountered a problem. I try to connect to my SQL server and put into
Server name and instance name SQL\SC and into SQL Server port 1434 or 1435, it doesn't connect. If I turn off firewall on SQL server, it connects without problems. On SQL server, I already have allowed incoming communication on ports UDP 1434
and also TCP 1433-1436. Than, I found out, that I need to allow in TCP 135 so I did it. It didn't work. Than I allowed TCP 49154-49157 for reporting services - it still didn't work. Last thing I allowed (using Microsoft Network Monitor) was TCP port 52384
and suddenly, it worked .
I know what UDP 1434 and TCP 1433-1436 are for. Also, I understand why I have to open 135 and 49154-49157. But I am pretty confused by the port 52384 - what is it for ? Why it isn't mentioned in documentation ? I am pounding with this problem for a while,
and also, I found out, that my SC VMM is not working, if I do not allow all of these ports - so, probably not only used by SCOM ?
Can anyone explain what's that port for ? Or why it's not enough to open 1434, 1433-1436, 135 and 49154-49157 ?
Thanks
TomasHi,
I didn't install SCOM yet. I am stuck at installation, till I figure out why port 52384 needs to be opened.
1. My SQL Server Configuration Manager is set like this:
Protocols for SC - TCP/IP Enabled
IP2
Active : Yes
Enabled : Yes
IP Address : ipv4 ip address of server
TCP Dynamic Ports : (blank)
TCP Port : 1435
So, that should be ok, right?
2. If I turn off firewall on SQL, everything connects ok - so based on that, I suppose that SCOM server firewall is configured ok . It's issue on SQL.
On SQL server, I have these inbound rules:
COM+ Network Access (DCOM-In) - TCP 135 enabled
HTTP/HTTPS - TCP 80,443 enabled
SCOM Reporting - TCP 49154-49157 enabled
SQL UDP ports - UDP 1433-1437 enabled
SQL TCP ports - TCP 1433-1435 enabled
SCOM 52384 - TCP 52384 enabled <- this is the port I don't understand, why it should be opened
If I disable any of these rules, my connection will not pass. I figured out those ports using Microsoft Network Monitor on SQL server.
3. Those databases do not exist yet. I am stuck at 3th step of Operations Manager Setup - at Configure the operational database.
There are fields Server name and instance name, SQL Server port, Database name, Database size, Data file folder, Log file folder
. First two are writable and the rest is greyed out. If I don't turn off firewall and I don't enable all rules from point 2 on SQL server and than put in the SQL server name with instance (SQL\SC) and port 1434 (or 1435) it gives
me red cross, and rest of the page stays greyed out - so, it's unable to connect. If I turn off firewall, or enable all the rules in previous point (2) I am able to change name of the database, database size, data/log file folder. But if I disable any
of those ports, it stays greyed out - I am concerned about port 52384, why it should be opened? What is it for? Why it isn't mentioned in any documentation? Or am I doing something wrong?
Thanks
Tomas -
Symptom
If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
“The specified SQL server instance is not valid”.
(Figure 1)
Figure 1.
Reason
This issue may be caused by multiple reasons, for example the reasons in Figure 1.
However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
to find the root reason:
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Later, you will find the error as below:
ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
(0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
--- End of inner exception stack trace ---;
Solution
According to the error message, you can delete encrypted content by following the steps below:
Open SQL Reporting Services Configuration Manager.
Select “Encryption Keys”.
Click “Delete” to delete all encrypted content. (Figure 2)
Figure 2.
After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
Figure 3.
In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
service logs to find the root reason.
Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
How to Install the Operations Manager Reporting Server
http://technet.microsoft.com/en-us/library/hh298611.aspx
Unable to install SCOM 2012 Reporting Services
http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support -
SQL Server 2008 R2 Setup Very Slow
Hi,
We have a multi-node SQL Server 2008 R2 Failover Cluster.
I've noticed that the SQL Server 2008 R2 Setup is extremely slow and that it appears to only be using 1 of the 128 "CPUs" (i.e. in Task Manager).
We use this for creating new cluster groups and alike.
Is this tool only single threaded and is there a way to increase the performance? Our CPUs are 2.something GHz, we have 512GB of RAM and fast local disks.
ThanksHello,
What happen if you slipstream the SQL Server 2008 R2 with the latest SQL Server 2008 R2 service pack? Maybe SQL Server setup does better after the slipstream process.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
http://msdn.microsoft.com/en-us/library/dd638062(v=sql.105).aspx (Slipstream a SQL Server 2008 R2
Update)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server 2008 R2 setup error
installing the above, I get an error just before the end of the setup saying - Attempted to perform an unathorized operation. Click retry or cancel.
Any ideas why this is doing this?Hello,
Please try the following resources:
http://blogs.msdn.com/b/petersad/archive/2009/08/08/sql-server-2008-could-not-fix-registry-key-issue-and-how-to-resolve.aspx
http://social.technet.microsoft.com/Forums/sqlserver/en-US/3649e3f7-e726-4bc7-854f-0b436756dad0/sql-server-2008-installation-problem
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/61d56f64-2575-4a58-9503-84579476afaf/sql-server-2008-setup-error-attempted-to-perform-an-unauthorized-operation
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cfab9cdd-eb89-4e70-a255-4f4bff3def8e/sql-server-2008-r2-setup-fails-with-error-attempted-to-perform-an-unauthorized-operation
If the above resources do not help, please share with us the Detail.txt log file. The following
article may help you locate the file:
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
How to sql server port number to scom inventory
can some one help me how to add sql server port number to scom inventory
To open a port in the Windows firewall for TCP access
On the
Start menu, click Run, type WF.msc, and then click
OK.
In the
Windows Firewall with Advanced Security, in the left pane, right-click
Inbound Rules, and then click New Rule in the action pane (upper right corner).
In the Rule Type dialog box, select
Port, and then click Next.
In the Protocol and Ports dialog box, select
TCP. Select Specific local ports, and then type the port number of the instance of the Database Engine, In my case we are using the default which is
1433. Click Next.
In the Action dialog box, select
Allow the connection, and then click Next.
In the Profile dialog box, I am going to Leave
Domain turned on and turn private and public off. Then click
Next.
In the Name dialog box, type "Allow SQL 1433 Inbound” and for a description I am putting in the same. Then click
Finish.
Also you can refer below link
http://blogs.technet.com/b/danstolts/archive/2011/06/08/how-to-open-firewall-port-1433-for-sql-server-database-engine-for-use-with-scom-or-anything-else.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
SQL Server Express 2008 Setup Error : Exit code -2147467259.
Hello.
I have been trying to install SQL Express 2008, 3 different editions on a Windows 2008 Standard Server. All of the installers failed just after the install file had finished unpacking itself in a temp folder. No errors or logs were found.
.Net3.5sp1, Windows Installer 4.5 and PowerShell 1.0 were all installed.
I was only able to find a log file when I used the SqlExpressWrapper.exe to drive the installation.
The error displayed from the wapper is : An error occurred during installation of SQL Server 2008 Express. Installation failed with exit code -2147467259
thank you for your help.
Naim
Here is the complete log.
C:\ProgramData\Microsoft\SQL Server 2008 Express Install\2008-11-12_14-27-41-519\Logs\Install Wrapper\log.txt
Info: [T1][14:27:41.519] Program.Main Install Wrapper started, log initialized.
Verbose: [T1][14:27:41.550] Program.Main Executable path: C:\ProgramData\Microsoft\SQL Server 2008 Express Install\2008-11-12_13-56-59-277\SqlExpressWrapper.exe
Verbose: [T1][14:27:41.550] Program.Main Command line arguments: (none)
Verbose: [T1][14:27:41.550] Program.Main Environment:
Current UI culture: en-US
Installed culture: en-US
OS: Windows Server 2008 Service Pack 1 (Microsoft Windows NT 6.0.6001 Service Pack 1), product type: 3
Architecture: x86
Verbose: [T1][14:27:41.550] Program.Main Running UI.
Verbose: [T1][14:27:41.550] LocaleCollection.GetLocaleForCulture Start - cultureName=en-US
Verbose: [T1][14:27:41.550] LocaleCollection.GetLocaleForCulture End - returned [Id=en, EnglishName=English]
Verbose: [T1][14:27:42.924] Wizard.Window_Loaded Start - sender=Microsoft.SqlServer.SqlExpressWrapper.UI.Wizard; e=System.Windows.RoutedEventArgs
Verbose: [T1][14:27:42.924] Wizard.Window_Loaded End
Info: [T1][14:27:43.845] InstallState.get_ComponentsToInstall Determining components to install.
Verbose: [T1][14:27:43.845] ComponentInfo.get_IsInstalled Start
Info: [T1][14:27:43.845] ComponentInfo.get_IsInstalled Checking whether Windows Installer 4.5 is installed.
Verbose: [T1][14:27:43.845] ComponentInfo.get_IsInstalled Checking version of file C:\Windows\system32\msi.dll; minimum version is 4.5
Verbose: [T1][14:27:43.845] ComponentInfo.get_IsInstalled Detected version 4.5.6001.22162
Verbose: [T1][14:27:43.845] ComponentInfo.get_IsInstalled File version check PASSED.
Info: [T1][14:27:43.845] ComponentInfo.get_IsInstalled Windows Installer 4.5 is installed.
Verbose: [T1][14:27:43.845] ComponentInfo.get_IsInstalled End - returned True
Verbose: [T1][14:27:43.845] InstallState.get_ComponentsToInstall Windows Installer 4.5 - No (already installed)
Verbose: [T1][14:27:43.845] ComponentInfo.get_IsInstalled Start
Info: [T1][14:27:43.845] ComponentInfo.get_IsInstalled Checking whether Windows Powershell 1.0 is installed.
Verbose: [T1][14:27:43.845] ComponentInfo.CheckRegistryValues Start - path=HKEY_LOCAL_MACHINE\Software\Microsoft\Powershell\1:Install; data=1
Verbose: [T1][14:27:43.845] ComponentInfo.CheckRegistryValue Start - path=HKEY_LOCAL_MACHINE\Software\Microsoft\Powershell\1:Install; data=1
Verbose: [T1][14:27:43.861] ComponentInfo.ParseRegKeyPath Start - path=HKEY_LOCAL_MACHINE\Software\Microsoft\Powershell\1:Install; keyName=NULL; valueName=NULL
Verbose: [T1][14:27:43.861] ComponentInfo.ParseRegKeyPath End
Verbose: [T1][14:27:43.861] ComponentInfo.CheckRegistryValue Checking registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Powershell\1:Install for 1
Verbose: [T1][14:27:43.861] ComponentInfo.CheckRegistryValue End - returned True
Verbose: [T1][14:27:43.861] ComponentInfo.CheckRegistryValues End - returned True
Verbose: [T1][14:27:43.861] ComponentInfo.get_IsInstalled Registry check PASSED.
Info: [T1][14:27:43.861] ComponentInfo.get_IsInstalled Windows Powershell 1.0 is installed.
Verbose: [T1][14:27:43.861] ComponentInfo.get_IsInstalled End - returned True
Verbose: [T1][14:27:43.861] InstallState.get_ComponentsToInstall Windows Powershell 1.0 - No (already installed)
Verbose: [T1][14:27:43.861] ComponentInfo.get_IsInstalled Start
Verbose: [T1][14:27:43.861] ComponentInfo.get_IsInstalled End - returned False
Verbose: [T1][14:27:43.861] InstallState.get_ComponentsToInstall SQL Server 2008 Express with Tools - Yes
Verbose: [T1][14:27:43.861] InstallState.get_ComponentsToInstall SQL Server 2008 Express with Advanced Services - No (not selected or required)
Verbose: [T1][14:27:43.861] InstallState.get_ComponentsToInstall SQL Server 2008 Express - No (not selected or required)
Verbose: [T1][14:27:43.908] StartPage.Page_Loaded Start - sender=Microsoft.SqlServer.SqlExpressWrapper.UI.StartPage; e=System.Windows.RoutedEventArgs
Verbose: [T1][14:27:43.908] StartPage.Page_Loaded End
Verbose: [T1][14:27:46.546] StartPage.ButtonInstall_Click Start - sender=System.Windows.Controls.Button: Install; e=System.Windows.RoutedEventArgs
Verbose: [T1][14:27:46.546] LocaleCollection.GetLocaleForCulture Start - cultureName=en-US
Verbose: [T1][14:27:46.546] LocaleCollection.GetLocaleForCulture End - returned [Id=en, EnglishName=English]
Verbose: [T1][14:27:46.562] InstallController.InstallCommand_ExecutedStart - sender=Microsoft.SqlServer.SqlExpressWrapper.UI.StartPage; e=System.Windows.Input.ExecutedRoutedEventArgs
Verbose: [T1][14:27:46.562] InstallController.InstallCommand_ExecutedEnd
Verbose: [T1][14:27:46.562] StartPage.ButtonInstall_Click End
Verbose: [T3][14:27:46.562] InstallController.InstallWorker Start
Verbose: [T3][14:27:46.562] LocaleCollection.GetLocaleForCulture Start - cultureName=en-US
Verbose: [T3][14:27:46.562] LocaleCollection.GetLocaleForCulture End - returned [Id=en, EnglishName=English]
Info: [T3][14:27:46.562] InstallController.InstallWorker Starting install session.
Verbose: [T3][14:27:46.562] InstallState.GetIncompatibleComponents Start
Info: [T3][14:27:46.562] InstallState.GetIncompatibleComponents Checking components for system compatibility.
Info: [T3][14:27:46.562] ComponentInfo.get_TargetDeployment Determining best deployment of SQL Server 2008 Express with Tools for this system.
Verbose: [T3][14:27:46.562] ComponentInfo.get_TargetDeployment Target locale: en
Info: [T3][14:27:46.577] ComponentInfo.get_TargetDeployment Best deployment: [LocaleId=en, OS=5.1.2600-5.1.9999.9999,5.2.3790.3959-, Architecture=x86, DownloadUrl=http://go.microsoft.com/fwlink/?LinkID=119768&clcid=0x409]
Info: [T3][14:27:46.577] InstallState.GetIncompatibleComponents Found 0 incompatible component(s).
Verbose: [T3][14:27:46.577] InstallState.GetIncompatibleComponents End - returned System.Collections.ObjectModel.Collection`1[Microsoft.SqlServer.SqlExpressWrapper.Configuration.ComponentInfo]
Verbose: [T3][14:27:46.577] InstallController.DownloadComponents Start
Info: [T3][14:27:46.577] InstallController.DownloadComponents Download phase started.
Info: [T3][14:27:46.577] InstallState.get_ComponentsToDownload Determining components to download.
Verbose: [T3][14:27:46.577] ComponentInfo.get_IsInstalled Start
Verbose: [T3][14:27:46.577] ComponentInfo.get_IsInstalled End - returned True
Verbose: [T3][14:27:46.577] InstallState.get_ComponentsToDownload Windows Installer 4.5 - No (already installed)
Verbose: [T3][14:27:46.577] ComponentInfo.get_IsInstalled Start
Verbose: [T3][14:27:46.577] ComponentInfo.get_IsInstalled End - returned True
Verbose: [T3][14:27:46.593] InstallState.get_ComponentsToDownload Windows Powershell 1.0 - No (already installed)
Verbose: [T3][14:27:46.593] ComponentInfo.get_IsInstalled Start
Verbose: [T3][14:27:46.593] ComponentInfo.get_IsInstalled End - returned False
Verbose: [T3][14:27:46.593] ComponentInfo.get_IsDownloaded Start
Verbose: [T1][14:27:47.608] ProgressPage.Page_Loaded Start - sender=Microsoft.SqlServer.SqlExpressWrapper.UI.ProgressPage; e=System.Windows.RoutedEventArgs
Verbose: [T1][14:27:47.608] ProgressPage.Page_Loaded End
Verbose: [T3][14:27:47.639] ComponentInfo.get_IsDownloaded File C:\ProgramData\Microsoft\SQL Server 2008 Express Install\Downloads\SqlExpressWithTools\SQLEXPRWT_x86_ENU.exe is already downloaded.
Verbose: [T3][14:27:47.639] ComponentInfo.get_IsDownloaded End - returned True
Verbose: [T3][14:27:47.639] InstallState.get_ComponentsToDownload SQL Server 2008 Express with Tools - No (already downloaded)
Verbose: [T3][14:27:47.639] InstallState.get_ComponentsToDownload SQL Server 2008 Express with Advanced Services - No (not selected or required)
Verbose: [T3][14:27:47.639] InstallState.get_ComponentsToDownload SQL Server 2008 Express - No (not selected or required)
Info: [T3][14:27:47.639] InstallController.DownloadComponents Download phase ended.
Verbose: [T3][14:27:47.639] InstallController.DownloadComponents End
Verbose: [T3][14:27:47.639] InstallController.InstallComponents Start
Info: [T3][14:27:47.639] InstallController.InstallComponents Install phase started.
Verbose: [T3][14:27:47.639] InstallController.SetForRestart Start - restart=True
Verbose: [T3][14:27:47.654] InstallController.CopyProgramFiles Start
Verbose: [T3][14:27:47.654] InstallController.CopyProgramFiles Copying wrapper files from C:\ProgramData\Microsoft\SQL Server 2008 Express Install\2008-11-12_13-56-59-277 to C:\ProgramData\Microsoft\SQL Server 2008 Express Install\2008-11-12_14-27-41-519
Verbose: [T3][14:27:47.701] InstallController.CopyProgramFiles End
Verbose: [T3][14:27:47.701] InstallController.SetForRestart Setting registry key for restart.
Verbose: [T3][14:27:47.701] InstallController.SetForRestart End
Verbose: [T3][14:27:47.717] ComponentInstaller.Install Start
Info: [T3][14:27:47.717] ComponentInstaller.Install Preparing to install SQL Server 2008 Express with Tools.
Verbose: [T3][14:27:47.717] ComponentInstaller.ValidateFile Start
Info: [T3][14:27:47.717] ComponentInstaller.ValidateFile Validating SQLEXPRWT_x86_ENU.exe.
Verbose: [T3][14:27:47.717] ComponentInstaller.GetFileCertificate Start - file=C:\ProgramData\Microsoft\SQL Server 2008 Express Install\Downloads\SqlExpressWithTools\SQLEXPRWT_x86_ENU.exe
Verbose: [T3][14:27:47.717] ComponentInstaller.GetFileCertificate Retrieved certificate: CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
Verbose: [T3][14:27:47.717] ComponentInstaller.GetFileCertificate End - returned [Subject]
CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
[Issuer]
CN=Microsoft Code Signing PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
[Serial Number]
610F784D000000000003
[Not Before]
2007-08-22 20:23:13
[Not After]
2009-02-22 19:33:13
[Thumbprint]
D57FAC60F1A8D34877AEB350E83F46F6EFC9E5F1
Verbose: [T3][14:27:47.717] ComponentInstaller.IsValidCertificate Start - cert=[Subject]
CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
[Issuer]
CN=Microsoft Code Signing PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
[Serial Number]
610F784D000000000003
[Not Before]
2007-08-22 20:23:13
[Not After]
2009-02-22 19:33:13
[Thumbprint]
D57FAC60F1A8D34877AEB350E83F46F6EFC9E5F1
Verbose: [T3][14:27:47.779] ComponentInstaller.IsValidCertificate Looking in certificate chain for public key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
Verbose: [T3][14:27:47.779] ComponentInstaller.IsValidCertificate Checking certificate: [Subject] CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US [Issuer] CN=Microsoft Code Signing PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US [Serial Number] 610F784D000000000003 [Not Before] 2007-08-22 20:23:13 [Not After] 2009-02-22 19:33:13 [Thumbprint] D57FAC60F1A8D34877AEB350E83F46F6EFC9E5F1
Verbose: [T3][14:27:47.779] ComponentInstaller.IsValidCertificate End - returned True
Info: [T3][14:27:47.779] ComponentInstaller.ValidateFile File validation PASSED.
Verbose: [T3][14:27:47.779] ComponentInstaller.ValidateFile End - returned True
Info: [T3][14:27:47.779] ComponentInstaller.Install Installing SQL Server 2008 Express with Tools.
Verbose: [T3][14:27:47.795] ComponentInstaller.Install Executing command line "C:\ProgramData\Microsoft\SQL Server 2008 Express Install\Downloads\SqlExpressWithTools\SQLEXPRWT_x86_ENU.exe" /ACTION=Install
Verbose: [T3][14:27:47.795] ComponentInstaller.ParseCommandLine Start
Verbose: [T3][14:27:47.795] ComponentInstaller.ParseCommandLine End - returned System.Diagnostics.ProcessStartInfo
Verbose: [T3][14:27:48.903] ComponentInstaller.Install Waiting for process to exit.
Verbose: [T3][14:28: 0. 97] ComponentInstaller.Install Process returned exit code -2147467259.
Error: [T3][14:28: 0. 97] ComponentInstaller.Install Command line '"C:\ProgramData\Microsoft\SQL Server 2008 Express Install\Downloads\SqlExpressWithTools\SQLEXPRWT_x86_ENU.exe" /ACTION=Install ' returned unexpected error code -2147467259.
Verbose: [T3][14:28: 0. 97] ComponentInstaller.Install End - returned NULL
Error: [T3][14:28: 1.159] InstallController.InstallComponents Error: Microsoft.SqlServer.SqlExpressWrapper.Controller.InstallException was thrown: Installation failed with exit code -2147467259.
Source: SqlExpressWrapper
Stack: at Microsoft.SqlServer.SqlExpressWrapper.Controller.ComponentInstaller.Install()
at Microsoft.SqlServer.SqlExpressWrapper.Controller.InstallController.InstallComponents()
INNER EXCEPTION:
<NONE>
Verbose: [T3][14:28: 1.159] Wizard.controller_Error Start - sender=Microsoft.SqlServer.SqlExpressWrapper.Controller.InstallController; e=Microsoft.SqlServer.SqlExpressWrapper.Controller.ErrorEventArgs
Verbose: [T1][14:28: 1.159] Wizard.controller_Error Start - sender=Microsoft.SqlServer.SqlExpressWrapper.Controller.InstallController; e=Microsoft.SqlServer.SqlExpressWrapper.Controller.ErrorEventArgs
Verbose: [T1][14:28: 1.190] ErrorDialog.Window_Loaded Start - sender=Microsoft.SqlServer.SqlExpressWrapper.UI.ErrorDialog; e=System.Windows.RoutedEventArgs
Verbose: [T1][14:28: 1.190] ErrorDialog.Window_Loaded End
Verbose: [T1][14:28: 3.688] InstallController.ViewLogCommand_ExecutedStart - sender=Microsoft.SqlServer.SqlExpressWrapper.UI.ErrorDialog; e=System.Windows.Input.ExecutedRoutedEventArgs
Verbose: [T1][14:28: 3.688] InstallController.ViewLogCommand_ExecutedEnd
Verbose: [T1][14:30:18.832] InstallController.ViewLogCommand_ExecutedStart - sender=Microsoft.SqlServer.SqlExpressWrapper.UI.ErrorDialog; e=System.Windows.Input.ExecutedRoutedEventArgs
Verbose: [T1][14:30:18.847] InstallController.ViewLogCommand_ExecutedEndOk I found the log file. I used Process Monitor to trace setup.exe and it created SQLSetup.log in %userprofile%\appdata\local\temp\SqlSetup.log.
these are the lines which seem to be causing the error. Any idea of how I fix this ?
11/13/2008 09:40:44.273 Checking to see if policy file exists
11/13/2008 09:40:44.286 .Net security policy file does exist
11/13/2008 09:40:44.304 Attempting to load .Net security policy file
11/13/2008 09:40:44.318 Error: Cannot load .Net security policy file
Naim
here is the full log file:
11/13/2008 09:40:43.853 ======================================================================
11/13/2008 09:40:43.872 Setup launched
11/13/2008 09:40:43.884 Attempting to determine media source
11/13/2008 09:40:43.895 Media source value not specified on command line argument.
11/13/2008 09:40:43.914 Setup is launched from media directly so default the value to the current folder.
11/13/2008 09:40:43.973 Media source: C:\temp\SqlExpress\
11/13/2008 09:40:43.985 Attempt to determine media layout based on file 'C:\temp\SqlExpress\mediainfo.xml'.
11/13/2008 09:40:44.020 Media layout is detected as: Core
11/13/2008 09:40:44.033 Media LCID is detected as: 1033
11/13/2008 09:40:44.052 Local setup.exe not found, so continuing to run setup.exe from media.
11/13/2008 09:40:44.063 /? or /HELP or /ACTION=HELP specified: false
11/13/2008 09:40:44.075 Help display: false
11/13/2008 09:40:44.088 Checking to see if we need to install .Net version 2.0
11/13/2008 09:40:44.099 Determining the cluster status of the local machine.
11/13/2008 09:40:44.132 The local machine is not configured as a cluster node.
11/13/2008 09:40:44.154 Attempting to find media for .Net version 2.0
11/13/2008 09:40:44.166 .Net version 2.0 is installed
11/13/2008 09:40:44.178 RedistMSI::GetExpectedBuildRevision - Setup expects MSI 4.5.6001.22159 at the minimum
11/13/2008 09:40:44.189 Attempting to get Windows Installer version
11/13/2008 09:40:44.206 Windows Installer version detected: 4.5.6001.22162
11/13/2008 09:40:44.225 RedistMSI::IsVistaRTM - Not Vista RTM build
11/13/2008 09:40:44.237 Required version of Windows Installer is already installed
11/13/2008 09:40:44.249 Attempt to initialize SQL setup code group
11/13/2008 09:40:44.262 Attempting to determine security.config file path
11/13/2008 09:40:44.273 Checking to see if policy file exists
11/13/2008 09:40:44.286 .Net security policy file does exist
11/13/2008 09:40:44.304 Attempting to load .Net security policy file
11/13/2008 09:40:44.318 Error: Cannot load .Net security policy file
11/13/2008 09:40:44.341 Error: InitializeSqlSetupCodeGroupCore(32bit) failed
11/13/2008 09:40:44.357 Error: InitializeSqlSetupCodeGroup failed: 0x80004005
11/13/2008 09:40:44.375 Setup closed with exit code: 0x80004005
11/13/2008 09:40:44.399 ====================================================================== -
SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid
Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support -
Sql Server 2008 R2 setup status failed
Hi guys, plz help me when i install Sql2008 i get this error.... plx help me if you have solution...
Thanks in Advance...
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052377
Exit facility code: 1212
Exit error code: 1639
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-03-14 18:21:32
End time: 2014-03-14 18:30:00
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: NIRMAL-PC
Machine processor count: 8
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United Kingdom)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: E:\Software _2\Software _2\SQL2008\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: NIRMAL-PC\sdfg
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2008
INSTANCENAME: SQL2008
ISSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: NIRMAL-PC\sdfg
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_as_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\SystemConfigurationCheck_Report.htmHello,
Please try to uninstall SQL Server using YoyoYu suggestions on the following thread:
http://social.msdn.microsoft.com/Forums/en/sqlexpress/thread/4d6158a1-b601-428c-aad4-a1716e76de1a
When finish, re-install SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SMS_HIERARCHY_MANAGER reports (Message ID=3353):
"Hierarchy Monitoring detected that the ConfigMgr SQL Server <fqdn> ports 1433,4022, are not active on Firewall
exception."
This is a fresh SCCM 2012 environment with no firewall active. SQL is installed on the same server as SCCM 2012. Is there a way to fix this without enabling the firewall?Check this out
Issue:
ConfigMgr logs the error even though Windows Firewall is disabled or it is enabled and all exceptions are added to SQL Server(s).
Environment: I had an environment consist of a two node SQL Cluster hosting ConfigMgr database and a separate ConfigMgr primary site server
Resolution:
Windows firewall service must be started on both SQL nodes and ConfigMgr itself . As soon as the service is started exceptions for TCP 1433 and 4022 must be added to SQL nodes firewall.
After that the firewall profiles can be disabled using:
netsh advf set allp state off
This is true but if you disable the firewall even thought you have opened the Firewall port then disabled the firewall. The status message will continue to be generated and your site server will still be in an error state.
Notice that I said "disabled" and not "turn off".
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Sql server 2008 r2 setup support rules missing cluster node
i have error on install sql r2 there are problems in cluster node its failed on windows 8
Hi ,
Before you install SQL Server on a computer that is running Windows 8, about Microsoft SQL Server 2008 , you must apply and install Microsoft SQL Server 2008 R2 Service Pack 1 or a later after the initial setup is complete. To install a SQL Server failover
cluster, you must create and configure a failover cluster instance by running SQL Server setup. For more information, see:
Installing a SQL Server 2008 R2 Failover Cluster: http://msdn.microsoft.com/en-us/library/ms179410(v=sql.105).aspx
In addition, as other post, could you please help us to collect the detailed error message and the following error log? It is very useful for our research.
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\LOG\Summary.txt.
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\<YYYYMMDD_HHMM>\Detail.txt
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
SQL server 2012 evaluation setup
I did the download the SQL server 2012 evaluation.(sqlfull.iso)
and I did the download the VirtualCloneDrive file for the make virtual drive.
after I setup the Sqlfull file.
and I start install SQL.
and first step installation is going well.
and second step installation is going well.(8 items passed)
after I have error message (Error code 0x858c001b).
after I can't install SQL anymore.
anyone who know solution the problem this.Your description is not helpful at all. Please post contents of summary.txt file below link will help you locate it.
https://msdn.microsoft.com/en-us/library/ms143702%28v=sql.110%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
Maybe you are looking for
-
PeopleSoft - Record to report and procure to pay
Hi all, I've been working with Oracle EBS all my carear and know i've been required to change my skill to PeopleSoft so I'm a begginer at PeopleSoft. In one month I will be involved in a PeopleSoft project where "procure to pay" and "record to report
-
hi im getting the below error when im trying to deploy a web service in Jdeveloper using Weblogic 8.0. Error: WARNING: Unable to connect to URL: http://localhost:7001/Test-Sample-context-root/MyWebService1SoapHttpPort due to java.security.PrivilegedA
-
How to transfer contacts, messages from Android Samsung glaaxy, htc, lg to computer
If the back-up utility just doesn't do what you need it to then you're going to have to divide the back-up process into separate parts, starting with your contacts. learn how to transfer messages, contacts from samsung galaxy, htc, lg to computer.and
-
Dear all if there is a correction that has to be done in the master data, how will the data be there in development server as the master data will be created in production. How does it happen every time do we take the back up of production and copy t
-
HT4623 i have the ipod touch 8gb. i need to update the software 4.3. i try but don;t due that.
I HAVE THE IPOD TOUCH 8GB I NEED TO UPDATE THE SOFTWARE 4.3. I TRY BUT DONT FIX