Specifying hostname for the database during installation

I installed 11g r2 database as a Desktop server, nowhere during the installation did it ask me to review or change the hostname. It automatically used "localhost" as the hostname, and has written so in listener.ora, so no other machine on the network is able to use it. It only connects from within the same machine. Please help how to specify the hostname during installation.
Edited by: user4928701 on 8 Jul, 2011 11:15 PM

user4928701 wrote:
I installed 11g r2 database as a Desktop server, nowhere during the installation did it ask me to review or change the hostname. It automatically used "localhost" as the hostname, and has written so in listener.ora, so no other machine on the network is able to use it. It only connects from within the same machine. Please help how to specify the hostname during installation.
Edited by: user4928701 on 8 Jul, 2011 11:15 PMFirst, while the installation may (or may not) automatically create the listener.ora, it is not logically related. Creation/maintenance of listener has nothing to do with installation of software OR creation of a database.
Second, I believe (but am not sure, and setting up a test takes more time than I have at the moment) whatever automatic creation of listener may occur uses the hosts file to get that info.
Third, there is absolutely nothing stopping you from changing the listener.ora after the fact. There are no deep hooks between it and the installation.

Similar Messages

Creating the Windows Service for the Database Instance

Hello, I am using the PeopleTools 8.52 Installation for Oracle documentation and was in Task 6A-2: Creating the Windows Service for the Database Instance.
After I type in
oradim -new -sid ORCL -intpwd manager -startmode auto -pfile C:\Oracle\database\initORCL.ora
I had encountered these errors:
OPW-00005: File with same name exists - please delete or rename
DIM-00019: create service error
O/S-Error: (OS 1073) The specified service already exists.
Please advise.... Thank you in advance!

Hi, thank you for your reply!
After I typed oradim -delete -sid ORCL, it shows this:
Unable to stop service, OS Error = 1062
Instance deleted.
Then, I:
Set ORACLE_SID=ORCL
oradim -new -sid ORCL -intpwd manager -startmode auto -pfile C:\Oracle\database\initORCL.ora
Then, it shows:
OPW-00005: Files with same name exists - please delete or rename
Instance created.
Does it mean no error already and I can proceed?

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

SQL0964C The transaction log for the database is full

Hi,
i am planning to do QAS refresh from PRD system using Client export\import method. i have done export in PRD and the same has been moved to QAS then started imported.
DB Size:160gb
DB:DB2 9.7
os: windows 2008.
I facing SQL0964C The transaction log for the database is full issue while client import and regarding this i have raised incident to SAP then they replied to increase some parameter like(LOGPRIMARY,LOGSECOND,LOGFILSIZ) temporarily and revert them back after the import. Based on that i have increased from as below mentioned calculation.
the filesystem size of /db2/<SID>/log_dir should be greater than LOGFILSIZ*4*(Sum of LOGPRIMARY+LOGSECONDARY) KB
From:
Log file size (4KB)                         (LOGFILSIZ) = 60000
Number of primary log files                (LOGPRIMARY) = 50
Number of secondary log files               (LOGSECOND) = 100
Total drive space required: 33GB
To:
Log file size (4KB)                         (LOGFILSIZ) = 70000
Number of primary log files                (LOGPRIMARY) = 60
Number of secondary log files               (LOGSECOND) = 120
Total drive space required: 47GB
But still facing the same issue. Please help me to resolve the ASAP.
Last error TP log details:
3 ETW674Xstart import of "R3TRTABUFAGLFLEX08" ...
4 ETW000   1 entry from FAGLFLEX08 (210) deleted.
4 ETW000   1 entry for FAGLFLEX08 inserted (210*).
4 ETW675 end import of "R3TRTABUFAGLFLEX08".
3 ETW674Xstart import of "R3TRTABUFAGLFLEXA" ...
4 ETW000 [     dev trc,00000] Fri Jun 27 02:20:21 2014                                             -774509399 65811.628079
4 ETW000 [     dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] CON = 0 (BEGIN)                    85 65811.628164
4 ETW000 [     dev trc,00000] &+     DbSlModifyDB6( SQLExecute ): [IBM][CLI Driver][DB2/NT64] SQL0964C The transaction log for the database is full.
4 ETW000                                                                                                  83 65811.628247
4 ETW000 [     dev trc,00000] &+     SQLSTATE=57011 row=1
4 ETW000                                                                                                  51 65811.628298
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  67 65811.628365
4 ETW000 [     dev trc,00000] &+     DELETE FROM "FAGLFLEXA" WHERE "RCLNT" = ?
4 ETW000                                                                                                  62 65811.628427
4 ETW000 [     dev trc,00000] &+       cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, op_type=8, reopt=0
4 ETW000                                                                                                  58 65811.628485
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  53 65811.628538
4 ETW000 [     dev trc,00000] &+     Input SQLDA:
4 ETW000                                                                                                  52 65811.628590
4 ETW000 [     dev trc,00000] &+                        1 CT=WCHAR           T=VARCHAR         L=6     P=9     S=0
4 ETW000                                                                                                  49 65811.628639
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  50 65811.628689
4 ETW000 [     dev trc,00000] &+     Input data:
4 ETW000                                                                                                  49 65811.628738
4 ETW000 [     dev trc,00000] &+     row 1:             1 WCHAR           I=6       "210"               34 65811.628772
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  51 65811.628823
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  50 65811.628873
4 ETW000 [     dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] (END)                              27 65811.628900
4 ETW000 [    dbtran ,00000] ***LOG BY4=>sql error -964   performing DEL on table FAGLFLEXA
4 ETW000                                                                                                3428 65811.632328
4 ETW000 [    dbtran ,00000] ***LOG BY0=>SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1
4 ETW000                                                                                                  46 65811.632374
4 ETW000 [     dev trc,00000] dbtran ERROR LOG (hdl_dbsl_error): DbSl 'DEL'                             59 65811.632433
4 ETW000                         RSLT: {dbsl=99, tran=1}
4 ETW000                         FHDR: {tab='FAGLFLEXA', fcode=194, mode=2, bpb=0, dbcnt=0, crsr=0,
4 ETW000                                hold=0, keep=0, xfer=0, pkg=0, upto=0, init:b=0,
4 ETW000                                init:p=0000000000000000, init:#=0, wa:p=0X00000000020290C0, wa:#=10000}
4 ETW000 [     dev trc,00000] dbtran ERROR LOG (hdl_dbsl_error): DbSl 'DEL'                            126 65811.632559
4 ETW000                         STMT: {stmt:#=0, bndfld:#=1, prop=0, distinct=0,
4 ETW000                                fld:#=0, alias:p=0000000000000000, fupd:#=0, tab:#=1, where:#=2,
4 ETW000                                groupby:#=0, having:#=0, order:#=0, primary=0, hint:#=0}
4 ETW000                         CRSR: {tab='', id=0, hold=0, prop=0, max.in@0=1, fae:blk=0,
4 ETW000                                con:id=0, con:vndr=7, val=2,
4 ETW000                                key:#=3, xfer=0, xin:#=0, row:#=0, upto=0, wa:p=0X00000001421A3000}
2EETW125 SQL error "-964" during "-964" access: "SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1"
4 ETW690 COMMIT "14208" "-1"
4 ETW000 [     dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] CON = 0 (BEGIN)                 16208 65811.648767
4 ETW000 [     dev trc,00000] &+     DbSlModifyDB6( SQLExecute ): [IBM][CLI Driver][DB2/NT64] SQL0964C The transaction log for the database is full.
4 ETW000                                                                                                  75 65811.648842
4 ETW000 [     dev trc,00000] &+     SQLSTATE=57011 row=1
4 ETW000                                                                                                  52 65811.648894
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  51 65811.648945
4 ETW000 [     dev trc,00000] &+     INSERT INTO DDLOG (SYSTEMID, TIMESTAMP, NBLENGTH, NOTEBOOK) VALUES ( ? , CHAR(   CURRENT TIMESTAMP - CURRENT TIME
4 ETW000                                                                                                  50 65811.648995
4 ETW000 [     dev trc,00000] &+     ZONE   ), ?, ? )
4 ETW000                                                                                                  49 65811.649044
4 ETW000 [     dev trc,00000] &+       cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, op_type=15, reopt=0
4 ETW000                                                                                                  55 65811.649099
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  49 65811.649148
4 ETW000 [     dev trc,00000] &+     Input SQLDA:
4 ETW000                                                                                                  50 65811.649198
4 ETW000 [     dev trc,00000] &+                        1 CT=WCHAR           T=VARCHAR         L=44    P=66    S=0
4 ETW000                                                                                                  47 65811.649245
4 ETW000 [     dev trc,00000] &+                        2 CT=SHORT           T=SMALLINT        L=2     P=2     S=0
4 ETW000                                                                                                  48 65811.649293
4 ETW000 [     dev trc,00000] &+                        3 CT=BINARY          T=VARBINARY       L=32000 P=32000 S=0
4 ETW000                                                                                                  47 65811.649340
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  50 65811.649390
4 ETW000 [     dev trc,00000] &+     Input data:
4 ETW000                                                                                                  49 65811.649439
4 ETW000 [     dev trc,00000] &+     row 1:             1 WCHAR           I=14      "R3trans"           32 65811.649471
4 ETW000 [     dev trc,00000] &+                        2 SHORT           I=2        12744              32 65811.649503
4 ETW000 [     dev trc,00000] &+                        3 BINARY          I=12744   00600306003200300030003900300033003300310031003300320036003400390000...
4 ETW000                                                                                                  64 65811.649567
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  52 65811.649619
4 ETW000 [     dev trc,00000] &+
4 ETW000                                                                                                  51 65811.649670
4 ETW000 [     dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] (END)                              28 65811.649698
4 ETW000 [    dbsyntsp,00000] ***LOG BY4=>sql error -964   performing SEL on table DDLOG                36 65811.649734
4 ETW000 [    dbsyntsp,00000] ***LOG BY0=>SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1
4 ETW000                                                                                                  46 65811.649780
4 ETW000 [    dbsync ,00000] ***LOG BZY=>unexpected return code 2          calling ins_ddlog           37 65811.649817
4 ETW000 [     dev trc,00000] db_syflush (TRUE) failed                                                  26 65811.649843
4 ETW000 [     dev trc,00000] db_con_commit received error 1024 in before-commit action, returning 8
4 ETW000                                                                                                  57 65811.649900
4 ETW000 [    dbeh.c ,00000] *** ERROR => missing return code handler                               1974 65811.651874
4 ETW000                         caller does not handle code 1024 from dblink#5[321]
4 ETW000                         ==> calling sap_dext to abort transaction
2EETW000 sap_dext called with msgnr "900":
2EETW125 SQL error "-964" during "-964" access: "SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1"
1 ETP154 MAIN IMPORT
1 ETP110 end date and time   : "20140627022021"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
Regards,
Rajesh

Hi Babu,
I believe you should have taken a restart of your system if log primary are changed. If so, then increase log primary to 120 and secondary to 80 provide size and space are enough.
Note 1293475 - DB6: Transaction Log Full
Note 1308895 - DB6: File System for Transaction Log is Full
Note: 495297 - DB6: Monitoring transaction log
Regards,
Divyanshu

No shared library found for the database with ID DBID

Hi SDN,
We're trying to connect our BW system under WIN/MSSQL 2005 to an source system (RSA1) witch is an DATABASE DB4 on OS400.
when we check the database connection, it gave us the error
No shared library found for the database with ID DBID
in SM21 we've found
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
someone can guide me were to found DBSL library for this time of external connection from Windows to DB4?
thanks in advance,
best regards,
Pedro Rodrigues

Hi again,
after download dbdb4slib.dll and copied it to kernel directory, it gave this error message
B create_con (con_name=DBID)
B Loading DB library 'E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll) Error 126 [dlnt.c       237]
M          Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll'
[dbcon.c      4672]
B ***LOG BYG=> could not load library for database connection DBID      [dbds#3 @ 1035] [dbds    1035 ]
someone has some idea?
thakns

Prompting for the database logon while opening the report in CMC

I created a report and saved in the Crystal server 2008 repository. I set the default Database configuration as
report > Schedule > Database Logon > set password
or tick "Use same database logon as when report is run" in Default Settings > Database Configuration.
But when I am click on View for the report still it is promting for the database loging name and password.
is there any other settings required for this.
Thanks
Unni

Moving to BOE forums

ORA-04054 : using variable substitution for the database link name

Hi,
I need to use variable substitution for the database link name.
Here is my command :
declare
GET VARCHAR2(50);
begin
select OIA_GET_DESIGNATION into GET from INFODRI.OMA_IN_ARTICLES;
for rec in (select * from [email protected]_GET_DESIGNATION)
LOOP
dbms_output.put_line('TEN_CODE vaut : '||rec.ten_code);
END LOOP;
exception
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('ERREUR ORACLE DETECTEE : '||rec.OIR_CUR);
DBMS_OUTPUT.PUT_LINE('Message Erreur : '||SUBSTR(SQLERRM,1,245));
:crd := -1;
end;
When I run this programm, I receive the error :
ORA-04054: database link REC.OIA_GET_DESIGNATION does not exist
When I replace :
for rec in (select * from [email protected]_GET_DESIGNATION)
by :
for rec in (execute immediate 'select * from tensions@'||rec.OIA_GET_DESIGNATION)
I receive the error :
PLS-00103 : Encountered the symbol "IMMEDIATE" while parsing.
What can I do to resolv my problem ?
Regards,
Rachel

What is the name of the DB Link and the name of the object you are selecting
from?
I find it easier to create a view on the remote object then use that in selects.
e.g,
Link Name = MyLink
Object_name = Addr_Loc
create or replace VIEW Rem_Addr_Loc AS
select * from addr_loc@mylink;
In the code I then use the view
begin
for C_Rec in (select * from Rem_Addr_loc)
loop
dbms_output.put_line('Rec: '|| C_Rec.Col1);
end loop;
end;

[Tabular] Only an admin for the database (not server) -- can I push changes?

I recently created a PowerPivot workbook that got pushed out to my enterprise's tabular server. And while our current IT policies keep me from being able to be an SSAS Administrator, I
did get included in the Admin role for the database itself (not the server.) And that's where I'm a little lost.
The database permissions for the Admin role are set for Full control, Process database, and Read. And yes, I can read and process the database. But is it possible for me to make any changes to the model itself? The only way I could think of to make changes
was to suck the model back down into Visual Studio, edit, and redeploy. But it looks like deploying requires being an Admin of the
server to push the metadata.
I'd love to know if I'm understanding things correctly.
Thanks so much,
Henson
**EDIT** Looking at this page, it seems that all you can really do on a database level is delete it or change the properties, not the model itself: http://msdn.microsoft.com/en-us/library/ms175596.aspx

Hi Techhenson,
According to your description, you want to know if you can change the SQL Server Analysis Services tabular model as a database administrator, right?
I have tested it on my local environemnt, as a database administrator, we can change the tabular model properties in SQL Server Management Studio (SSMS). If we need to change the structure of the tabular model, we need to create a Import Project to import
the model on SQL Server Data Tolls (SSDT), and then modify the model and redeploy it to the server.
Regards,
Charlie Liao
TechNet Community Support

LoadDB problem: no version found for the database

HEllo,
I try to use the loadDB directive with an existing pool and wlst offline but I always receive the error "No version found for the database". I tried to create a pool with the console and use it as loading pool but that didn't worked.
I saw in the script.log file that my pool was correctly found but it seems that it can't found the driverName attribute of my pool when trying to get version.
I have checked and the drivername is correctly set.
Any idea? I will post the complete stack and the script.log later.

here is the full stack:
com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.scrip
t.ScriptException: No version is found for database:
at com.bea.plateng.domain.script.jython.CommandExceptionHandler.handleEx
ception(CommandExceptionHandler.java:33)
at com.bea.plateng.domain.script.jython.WLScriptContext.handleException(
WLScriptContext.java:897)
at com.bea.plateng.domain.script.jython.WLScriptContext.loadDB(WLScriptC
ontext.java:817)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx0.loadDB$22(initWls.py:98)
at org.python.pycode._pyx0.call_function(initWls.py)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyFunction.__call__(PyFunction.java)
at org.python.pycode._pyx4.f$0(CCFF_offline.py:17)
at org.python.pycode._pyx4.call_function(CCFF_offline.py)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.__builtin__.execfile_flags(__builtin__.java)
at org.python.core.__builtin__.execfile(__builtin__.java)
at org.python.core.__builtin__.execfile(__builtin__.java)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.pycode._pyx3.f$0(<input>:1)
at org.python.pycode._pyx3.call_function(<input>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.python.util.InteractiveInterpreter.runcode(InteractiveInterpreter
.java)
at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpret
er.java)
at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpret
er.java)
at com.bea.plateng.domain.script.jython.WLST_offline.handleInteractiveMo
de(WLST_offline.java:137)
at com.bea.plateng.domain.script.jython.WLST_offline.main(WLST_offline.j
ava:79)
Caused by: com.bea.plateng.domain.script.ScriptException: No version is found fo
r database:
at com.bea.plateng.domain.script.ScriptExecutor.getSQLFiles(ScriptExecut
or.java:2731)
at com.bea.plateng.domain.script.ScriptExecutor.loadDB(ScriptExecutor.ja
va:1056)
at com.bea.plateng.domain.script.jython.WLScriptContext.loadDB(WLScriptC
ontext.java:815)
... 40 more
here is the script.log part:
2007-01-23 08:50:12,127 INFO [main] com.bea.plateng.domain.script.ScriptExecutor - find JDBCConnectionPool "CCFFMainPool" as obj5
2007-01-23 08:50:12,127 INFO [main] com.bea.plateng.domain.script.ScriptExecutor - succeed: find JDBCConnectionPool "CCFFMainPool" as obj5
2007-01-23 08:50:12,127 INFO [main] com.bea.plateng.domain.script.ScriptExecutor - loadDB obj5
2007-01-23 08:50:12,137 DEBUG [main] com.bea.plateng.domain.script.ScriptExecutor - ScriptExecutor JDBCInfo:
DB2 Any:
CCFF_L1-tables.sql
Initial_Insert.sql
2007-01-23 08:50:12,137 DEBUG [main] com.bea.plateng.domain.script.ScriptExecutor - Database name:

BOM changes for the FERTs during a month.

Hi all ,
I have a requirement from customer BOM changes for the FERTs during a month.
Can anyone help me out the following requirement that i.e. customer requires that we wants to see as output the following fields :
1. Material description.
2. FERT Number
3. Change Number
4. Component Number that has been changed
5. Component Number reason
Please guide me how can this report can be developed with whole scenario by keeping which fields as Input selection and how can logically write it.thanks & Regards,
mani

Hi
Please help me on this requirement
Thanks & Regards,
Mani

Specify icon for the launcher

Hi
in my product configuration file (.product) I'm trying to specify icons
for the launcher (an xpm for Linux, icns for Mac and ico for Windows);
when I create the products with Tycho, the icons do not appear in the
main product folder (e.g., for Linux, there's not the xpm file near to
the executable).
Am I doing anything wrong? Are there any further specific rule to
follow? The icons are not in the same project where the product
configuration is specified, they are in the plugin where the product is
specified in the plugin.xml.
thanks in advance
Lorenzo
Lorenzo Bettini, PhD in Computer Science, DI, Univ. Torino
HOME: http://www.lorenzobettini.it
Xtext Book:
http://www.packtpub.com/implementing-domain-specific-languages-with-xtext-and-xtend/book

On 21/07/2015 17:18, Artemis Papakonstantinou wrote:
> Hello.
> I have a folder called icons in the same folder where my .product file
> is located.
> my .product file contains the following lines: (open it with a Text
> Editor instead of Product Configuration Editor)
>
> <launcher name="MyApp">
> <linux icon="/icons/icon.xpm"/>
> <macosx icon="/icons/macOS.icns"/>
> <solaris/>
> <win useIco="true">
> <ico path="/icons/favicon2.ico"/>
> <bmp/>
> </win>
> </launcher>
>
So the icons must be in the very same project of .product?
Lorenzo Bettini, PhD in Computer Science, DI, Univ. Torino
HOME: http://www.lorenzobettini.it
Xtext Book:
http://www.packtpub.com/implementing-domain-specific-languages-with-xtext-and-xtend/book

Is it possible to have 2 hostnames for the same ip in 9iASr2 installation??

Hi,
I am going to install 9iAS (9.0.2.0.1) on solaris 5.8, the hostname in nodename and hosts files all point to a name which I don't like to use, is it possible to add another entry in these files for the 9iAS?
The reason behind this is that the 9iAS installation Guide said I can't change hostname after install, but I like to have a meaningful name for the 9iAS when access OEM and HTTP home pages like:
http://goodName:7777
Do you know any other workaround?
Thanks

It is not possible to create two tables with same name in same schema.
A user can own one schema with his own name and another with the schema name SYS.
For this you have to grant sysdba privilage to the user and then have to connect using sys password or with the password specified in password file.
But this still you have to access to the table in sys schema using sys.table_name.
Hope Answered tthe Question.

How to find out the process count for a database during a particular window

Hi Team,
I want to find out the maximum process count reached for a database for an interval. Say between 1:00 to 2:00 AM IST. Please help
Database version:11.2.0.2
OS:AIX 6.1

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

Setting the connection for the database

hello,
Can somebody tell me how to set the username and password to be able to connect to the Oracle database? I installed
Oracle Developer Suite10g (9.0.4.0.0) for Microsoft Windows. When I try to connect it asks for username and password. During the installation I did not see any option to set the connection......
Thanks.

Did you installed an Oracle Server ? if not , the problem is that you do not have an Oracle Server to have a database. However you can run forms without a database setting the code: null; in the trigger for the form related to the login.
Joel PÃ©rez
http://www.oracle.com/technology/experts

Hostname for Standby Database

Hi All,
We are setting up standby database for MSSQL2008 in windows 2008 R2 environment. For our customer scenario, their infra team insist of using log shipping to transfer log file and file replication to to replication SAP files.
Therefore, i've a question in mind.. Do we need to maintain identical hostname for primary and standby database? fyi, they have cluster their primary and DR host.
If different hostname, virtual hostname is used, basically we can just drop the primary host from the domain and change that respective hostname, virutal hostname and ip for the DR host during swing over? If that's the case, is the any other action we need to perform? Do we need to change any registry? I believe SAP profiles and etc are identical due to the file replication.
If same hostname is maintained for both primary and standby host, i believe we might need to isolate standby host from the network and change the entries in DNS or routing table during swing over?
Any feedback and good suggestion are mostly welcome and much appreciate.
Cheers,
Regards
Nicholas Chang.
Edited by: Nicholas Chang on Feb 10, 2011 4:36 PM
Edited by: Nicholas Chang on Feb 10, 2011 4:37 PM

Hi,
when the primary and the standby database server are on the same network, they have to have a different hostname.
Is the SAP Ci on the same Cluster as the DB (active-active Cluster) ?
Is the SAP System itself a cluster ?
You have three different scenarios here:
- only the DB cluster is failing
- only the CI Cluster/System is failing
- both systems are failing
For the first case you can
- either change the profiles of the primary SAP system to point to the new DR DB Host
- or define a AD alias in beforehand, to which you connect normally.
Then you have to change the alias only to point the SAP System to the new DR DB Host
For the second case you can
- change the profiles of the DR SAP System to point to the primary DB Host
- or define a AD alias in beforehand, to which you connect normally. When you start
the DR SAP Systen then, it will connect to the primary DB Host
For the third case you can
- change the profiles of the DR SAP System to point to the seondary DB Host
- or define a AD alias in beforehand, to which you connect normally.
In the DR case you have to change the Alias in the AD and then you can
start the DR SAP Systen. It will connect to the primary DB Host
Changing the virtual or physical hostname during DR swing over is not a good option,
as you have too many side effects. Using an Alias is much easier and faster.
Using Database Mirroring (SQL 2005 or higher) will eliminate case 1, as the SAP
system can swing over to the DR side automatically in the DR case.
Best regards
Clas

Specifying hostname for the database during installation

Similar Messages

Maybe you are looking for