Spelling error in error message
Hello,
I know this is not a very important issue, but anyway I try to report it.
In SQLDev version 3.1.07.42 (but the issue is present also in v1.5.5) there is a spelling error in the connection busy error message.
It says "*Connection is currrently busy. Try again?*", but I believe there are too many "r" in the word "currently".
Thanks,
Paolo
Such tags can have uses beyond getting fed back to the compiler. For instance, I do this at the top of my build tree:
make -k >& ,make-log
analyzelogfile ,make-log > ,build-summary
The analysis summarizes how many warnings and errors come from the compiler, how many other compiler errors were generated (collect2 phase), and how many linker errors were generated, by type of warning/error. This is tremendously helpful in quickly finding out whether the changes you just checked in made the situation better or worse.
For purposes of writing the analyzelogfile script, it helps a lot to have consistent structure/format of error and warning messages. Currently it's uglier than that, partly because there are multiple build phases involved (preprocessor, compiler, linker), each with its own ideas on how to print messages, and partly because I'm also maintaining portable code (Studio and GCC). I end up with a Perl script to do the analysis, and it can be hacked as new types of messages are discovered. It would be a lot nicer if the structure/format were well-defined in advance, and such tags were human-readable. Then the script would have an easier time finding and reporting the summarized data, by simply including such tags in the output along with a count of each type of tag that occurred.
Similar Messages
-
Minor spelling error in error message
This was generated from the August Studio Express release:
"/build/project/include/utils.h", line 26: Error, undefidenterr: socklen_t is not defined.Such tags can have uses beyond getting fed back to the compiler. For instance, I do this at the top of my build tree:
make -k >& ,make-log
analyzelogfile ,make-log > ,build-summary
The analysis summarizes how many warnings and errors come from the compiler, how many other compiler errors were generated (collect2 phase), and how many linker errors were generated, by type of warning/error. This is tremendously helpful in quickly finding out whether the changes you just checked in made the situation better or worse.
For purposes of writing the analyzelogfile script, it helps a lot to have consistent structure/format of error and warning messages. Currently it's uglier than that, partly because there are multiple build phases involved (preprocessor, compiler, linker), each with its own ideas on how to print messages, and partly because I'm also maintaining portable code (Studio and GCC). I end up with a Perl script to do the analysis, and it can be hacked as new types of messages are discovered. It would be a lot nicer if the structure/format were well-defined in advance, and such tags were human-readable. Then the script would have an easier time finding and reporting the summarized data, by simply including such tags in the output along with a count of each type of tag that occurred. -
Error, posting the message
Why do I always get: 'Error, posting the message. Please make sure all required fields are entered' when I had not been given the option in the first place.
You can tell I am finding this interface frustrating. Why is Apple using software that they cannot (or will not) fix and which consistently performs worse than many other services?
Its one good point (for me) is the spelling check.
Xserve Other OSIt looks like the control data for the child segment is not getting populated. you have to find the code which populated the control data and see if it is doing what it should.
-
Error while downloading. message on E71 GPS USA Ma...
“Error while downloading” message on E71 with updated GPS USA Maps
I’m sure I’m not the only one having this problem but I recently updated my maps on my Straight Talk Nokia E71. The phone says I have map download V 3.03 10wk bo4 Mw Open GL LM MN, Map version 0.1.25.114.and I’m using Nokia Ovi Suite 2.2.1.23. After I installed V3.03, I installed it and download the 1.46GB USA map file and the three turn by turn files. But when I first started the GPS app I started getting the following error “Error while downloading”(This is on phone only)
I have tried to factory reset the phone, re-format the 8GB memory card, remove City data and GF files and even unloaded OVI Suite and reload it. But every time I select GPS app and start to find places or my position, I get "Error while downloading" message. I’m new to this phone and didn’t get a respectable book from Straight Talk. So I don’t know much about this phone or Nokia OS. What is this error and how do I fix it. Also when I try to sync from the phone I get the response "system error". Ovi suite on the PC says I have downloaded all the USA maps and English voice with street names. Please help I’m at a lost.
Computer specs
I am running Win-Vista, with a Broadband connection. 3 GB Ram, 2 gig Pentium dual core.
Tran’s flash card has plenty room left on card over 5 gigs left.
If I need to delete a file on the phone please tell me the exact file name because I’m not sure which one to remove from the apps folder.
Solved!
Go to Solution.@Action_Jackson
Welcome to the forum!
Whilst easy for me to say as keep very little data on device, I would suggest backup essential data then delete E:\cities + ,qf file followed by resetting device to "Out of box" state by keying in #7370# then 12345 (default Nokia lock code unless altered by yourself). At this point you would need to open OVI Maps application on device to re-initialise application and re-define necessary folder structure on memory card for device to be recognised by OVI Suite > Maps to re-download your regional mapping.
Happy to have helped forum with a Support Ratio = 42.5 -
Error while activating message mapping
Hi,
We are trying to activate message mappings and getting error as CHECK_EXCEPTION and in error details its showing that usr/sap/server.........................../classpath_resolver/Map.......................no such file or directory.........
What can be the issue?We can activate all other objects(DT,MT,IM,etc)
Best Regards,
Harleen Kaur ChadhaHi
Check this thread you can find the reason for this error CHECK_EXCEPTION solved here
Activating Object in IR - Getting Null Pointer Exception
Re: mapping test error
Internal error while checking object Message Mapping...
Problem Activating Mappings in the IR
Message Mapping activation Error
Regards
Abhishek -
When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80 -
Service desk error creating support message "help- create support message"
Hi
I'm customizing SM 7.0 SP Stack 15 service desk scenario. I'm in a VAR SAP, so It's a mandatory scenario.
I've done all basic settings from General Settings, Connection to SAP, Online Documentation, ...,
Business Partners, iBase, Basic BC-Sets for Configuration, Number Ranges. After them , for Scenario-Specific Settings-> Service Desk->Service Provider I've done all these steps. At SAP System Solution Manager, I've created solutions at dswp transaction and EW Alert are centralized these steps works. Transaction notif_create works and iBase are well mantained.
The problem is when I try create a support message from satellite SAP system. I logged With a SAP user which is BP, key user and has authorizations in a satellite system and I choose help->create support message, so a pop-up appears and I fill the fields, and I press button (Save/Send). An error appears:
Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
In order solve the error I review:
- The satellite SAP system is at the iBase installed components.
- I've Assign Number Range for ABA notifications at SLF1 transaction.
- I've Checked number range for Service Desk Message at SLFN transaction.
- I've configured ABA Message transaction DNO_CUST01, transaction DNO_CUST04
- (satellite system) Transaction sm30, table BCOS_CUST:
Appl. + Dest. + +
OSS_MSG W SM_SMGCLNT010_BACK CUST620 1.0
TST_CUS 0120009939
RFC SM_SMGCLNT010_BACK works, SM recollects EW Alert from this satellite system
- (satellite system) I logged with a SAP user with these roles:
SAP_SUPPDESK_CREATE
SAP_BC_CUS_CUSTOMIZER according SAP NOTE 834534
SAP_BC_CUS_ADMIN according SAP NOTE 834534
SAP_SV_FDB_NOTIF_BC_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
All these roles are mantained.
- I've review SAP Notes 834534, 864195, 621927(I haven't applied this SAP Note because it's older)
Please could you help me?
Thanks and Regards
RaulHi,
When I try create a SAP message via help->create suuport message, I get the same error so I run help->create support message in a satellite system so I run help->create support message in Solution Manager
system. Also, a dump is generated in Solution Manager when I try create support message or from satellite or from solution manager.
========================================================================
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Date and Time 10.07.2008 10:17:26
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_BOR_SERVICE_PPF============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: " ").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"CL_BOR_SERVICE_PPF============CP" or "CL_BOR_SERVICE_PPF============CM004"
"PROFILE_CONTAINS_PARTNERDEP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
Information on where terminated
Termination occurred in the ABAP program "CL_BOR_SERVICE_PPF============CP" -
in "PROFILE_CONTAINS_PARTNERDEP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 41
of the (Include) program "CL_BOR_SERVICE_PPF============CM004".
=========================================================================
Thanks and Regards
Raul -
Can't get firefox sync to work. I keep getting 'Error While Syncing' message
I am on Mac OS X 10.6.4, Snow Leopard on a Mini Mac a year old.
I got a message from X Marks telling me they were shutting down.
As I use my bookmarks every day and have thousands of them all sorted into folders I definitely never want to lose them or lose access to them if my house burns down or my computer is stolen!
I was using Firefox 3.6 and followed X Marks advise and downloaded Firefox Sync...but...won't work....kept giving me the 'Error While Syncing' message after trying to sync for a while. I looked at the blog and tried a few things like resetting password, restarting computer, checking my setting etc., but no deal. So, as the Firefox Sync download page told me that if I was using Firefox 4 beta the feature was built in and I didn't need the download, I then downloaded Firefox 4....which has removed my X Marks option, which was at least viable till after Xmas! and I still have the 'Error While Syncing' message beside the Sync button on my status bar....so now I am completely at a loss. The only thing I can do if I can't fix it up is go back to 3.6 and go on using X Marks while it is still available and pray that you get this sorted out before they dissappear.
I also like to be able to get my updated bookmarks on the other browsers I use, like Chrome and IE, so I would really appreciate it if you would include this cross browser sync capability as soon as you can. I have pledged X Marks that I would even pay for their service to continue as it seems they are so ahead of anyone else in their service and it is a large pain in the you know where that they can't keep going.
Thanks. and I hope you can help. From the blogs it seems that I am not the only one having this problem of getting the Firefox Sync working@globaltruth
Thank you for your suggestion. I tried it. Unfortunately, the error message still sits on my statusbar, right after the Firefox Sync image. -
I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
Any advise how to fix my problem?
thanks in advanceWhile you see a single trash can, in reality there are trash folders on each mounted volume. I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated. So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty. Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal. We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time). So launch Terminal (in utilities). You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
This first line is the only exception to the copy/pasting since you have to enter some information.
sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
where your-TM-volume-name is the name of your TM volume. That's the part you have to fill in since I don't know it.
When you hit return the sudo in that command will cause a prompt for your admin password. Enter it and hit return again. Note the password will not be shown as you type it. Post the results so I can tell you what to do next.
Note this ls command is not doing anything but listing the files in the TM's .Trashes folder. Remember I said each drive has it's own trash folder. .Trashes is it. -
The initial exception that caused the request to fail, was:
com.sap.tc.useragent.UserAgentServiceException: Syntax Error in number '$4' of User-Agent Number Element ID 'engineVersion'.
at com.sap.tc.useragent.ElementTypeNumber.createElement(ElementTypeNumber.java:34)
at com.sap.tc.useragent.UserAgentElement.createElement(UserAgentElement.java:34)
at com.sap.tc.useragent.UserAgentElement.copy(UserAgentElement.java:71)
at com.sap.tc.useragent.UserAgentTemplate.instantiate(UserAgentTemplate.java:45)
at com.sap.tc.useragent.detection.RegExpDetector.detectUserAgent(RegExpDetector.java:33)
... 62 more
See full exception chain for details.
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
For further information about the Web Dynpro error page, error analysis and a description of well-known error situations, see SAP note 1113811.
Correction Hints
Exception could be caused by the development component: com.sap.tc.useragent.interface
Note: The above hints are only a guess. They are automatically derived from the exception that occurred and therefore can't be guaranteed to address the original problem in all cases.
System Environment
Client
Web Dynpro Client Type AJAX Client
User agent Mozilla/5.0 (Android; Mobile; rv:24.0) Gecko/24.0 Firefox/24.0
Client Type ff
Client Type Profile nn7
ActiveX disabled
Java Applets enabled
Accessibility mode disabled
Inline CSS n/a
Validate by rendering true
Server
Web Dynpro Runtime vendor: 'sap.com', name: 'tc/wd/webdynpro', scV: 'sap.com', scN: 'WD-RUNTIME', location: 'SAP AG', counter: '7.3005.20130111125833.0000', R: '7.30', SP: '5', PL: '20', change number: '255333', codeline: NW730CORE_05_REL
J2EE Engine 7.30.3710.270166.20130816104554
System ID (SID) FP1
Server Node ID |13769650|137696|Server 00 01_137696|ciFP1/10.72.16.58|SERVER|RUNNING
Java VM SAP Java Server VM, version:6.1.038 19.1-b02, vendor: SAP AG
Operating system Linux, version: 2.6.32-220.el6.x86_64, architecture: amd64
Application
Java EE Application (deployable object) sap.com/pb
Web Dynpro Application PageBuilder
Request URI /webdynpro/resources/sap.com/pb/PageBuilder
Version vendor: 'sap.com', name: 'pb', scV: 'sap.com', scN: 'EP-RUNTIME', location: 'SAP AG', counter: '7.3005.20111228115104.0000', R: '7.30', SP: '5', PL: '4', change number: '160458'
Session & Other
Session Locale en_GB
Session Timezone India Standard Time
Time of Failure Sun Oct 27 09:59:27 IST 2013 (Java Time: 1382848167814)
Session User ClientUser(id=USER.PRIVATE_DATASOURCE.un:CC172020, name=CC172020)
Http Session Id 978BAO1ZCsh8JZ7REyIA575jsir4QQGyG9IA_SAP
Client Window Id WID1382848129974
Application Session Id CrXVdgZ0571vfwcUljh9Bw--Q4*zmQ0kblXVHMfCG18ZBg--
Web Dynpro Code Generation Infos
sap.com/pb
WD web module webdynpro/resources/sap.com/pb: SapDictionaryGenerationCore 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:24:28+0000, changelist=159000, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb: SapDictionaryGenerationTemplates 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:24:57+0000, changelist=159000, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb: SapGenerationFrameworkCore 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:14:41+0000,
WD web module webdynpro/resources/sap.com/pb: SapMetamodelCommon 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:17:37+0000, changelist=159372, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb: SapMetamodelCore 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:15:03+0000, changelist=159372, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb: SapMetamodelDictionary 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:20:22+0000, changelist=159002, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb: SapMetamodelWebDynpro 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:25:40+0000, changelist=159462, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb: SapWebDynproGenerationCore 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:37:46+0000, changelist=159461, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb: SapWebDynproGenerationTemplates 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:37:55+0000, changelist=159461, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb: SapWebDynproRuntimeGen 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:35:55+0000, changelist=159464, host=pwdfm257, is-central=true)
sap.com/pb_api
WD (release=NW730CORE_05_REL, buildtime=2011-12-28T16:24:57+0000, changelist=159000, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapGenerationFrameworkCore 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:14:41+0000, changelist=159048, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapIdeWebDynproCheckLayer 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:37:31+0000, changelist=159461, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapMetamodelCommon 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:17:37+0000, changelist=159372, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapMetamodelCore 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:15:03+0000, changelist=159372, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapMetamodelDictionary 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:20:22+0000, changelist=159002, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapMetamodelWebDynpro 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:25:40+0000, changelist=159462, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapWebDynproGenerationCore 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:37:46+0000, changelist=159461, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapWebDynproGenerationTemplates 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:37:55+0000, changelist=159461, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/pb_api: SapWebDynproRuntimeGen 7.3005.20111228114942.0000 (release=NW730CORE_05_REL, buildtime=2011-12-28T16:35:55+0000, changelist=159464, host=pwdfm257, is-central=true)
sap.com/tc~wd~api
WD web module webdynpro/resources/sap.com/tc~wd~api: SapDictionaryGenerationCore 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:27:04+0000, changelist=159000, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapDictionaryGenerationTemplates 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:27:18+0000, changelist=159000, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapGenerationFrameworkCore 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:05:47+0000, changelist=159048, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapIdeWebDynproCheckLayer 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:39:20+0000, changelist=180142, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapMetamodelCommon 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:10:50+0000, changelist=159372, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapMetamodelCore 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:07:26+0000, changelist=159372, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapMetamodelDictionary 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:22:41+0000, changelist=210375, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapMetamodelWebDynpro 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:27:36+0000, changelist=159462, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapWebDynproGenerationCore 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:39:36+0000, changelist=180142, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapWebDynproGenerationTemplates 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:39:43+0000, changelist=180142, host=pwdfm257, is-central=true)
WD web module webdynpro/resources/sap.com/tc~wd~api: SapWebDynproRuntimeGen 7.3005.20130109144853.0000 (release=NW730CORE_05_REL, buildtime=2013-01-11T17:37:00+0000, changelist=223591, host=pwdfm257, is-central=true)Oh man it looks like a problem with the web server.
Its an error that happens on SAP, even my dad reported an error like this to me but i wasn't able to solve it.
What i find is that its an error with browser incompatibility,
Check this http://scn.sap.com/message/10338540 -
Error while processing message to remote system
Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
RaghavendraHi,
>>><i>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.</i>
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha. -
Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek -
Error in Seeburger Message Monitoring
Hi ,
I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.Really didn't understand your scenario. That sentence makes no sense:
"I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
But what I understand from the error message you have provided...................
if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
Under Parameters Tab:
You must have set the following parameter
MDN Mode = "ASYNC"
And has not provided the following parameter just below it :
Receipt Delivery Address
This parameter should have value: the URL of your own AS2
server where the asynchronous MDNs are
to be delivered.
Hope this solves your problem.
Regards,
Suddha -
Oracle List of Error codes and messages
Hi,
In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?
ThanksIn our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?I don't know where to get such a list, but for a start you could search the log for the words "Error" and "ORA-"
-
Error in send message to A large number of audience
I want to send a message to A large number of audience but I get an error
This error
<< Messaging is sending a large number of SMS messages. Do you want to allow this app to continue sending messages? >>
Deny ....... Allow
Please Help me@AB2
You will have to contact Google's Android division on this issue, not Sony.
You have to see this pop up or this feature as a way to protect you, some people don't have unlimited text messages, and there are apps that might start sending large amounts of texts.
You can see this on other forums
http://forums.androidcentral.com/google-nexus-4/227096-messaging-sending-large-amount-messages.html
http://android.stackexchange.com/questions/38461/pop-up-message-when-sending-large-amounts-of-sms-me...
https://code.google.com/p/android/issues/detail?id=36617
Is or was your phone locked to a carrier/network branded? if it is or was, perhaps your carrier network could fix this.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Maybe you are looking for
-
Hello, I am using SQL Developer recent release EA 4.0.0.3.2.09 build main 12.84 (and another user on EA 4.0.0.13 build main 13.30) run into this error when query IBY_EXT_BANK_ACCOUNTS in Oracle EBS R12 ORA-29275: partial multibyte character 29275. 00
-
Table of Contents Deactivated in HTML Formatted Emails - How to Fix?
Problem Details: I produce a newsletter with an embedded table of contents. In iOS7, users were able navigate via the table of contents and traverse to the corresponding articles. This functionality has been lost upon the installation of iOS8. My
-
I need help in RFID in Agriculture
I student from MARA University of Technology, Malaysia.I do a research using sensor to integrated in RFID tags. Type of sensor that I want to use is moisture sensor. Does anybody here know how to integrate the sensor with RFID chip?are there any prog
-
hi folks, I am technical guy in ABAP HR. I want to learn the functional side of HR implementation. Where can i be able to learn the functional business flow for PA, PD, Payroll and Time Management. what would be the good place to start with ? I need
-
Oracle10g OEM Intranet URL Error
I am working in an Intranet at our university. I have installed Oracle10g everything is installed accurately. When I tried to access the URL http://hgpc39.uovs.ac.za:5500/em. The URL never works. I have installed Oracle10g at my home computer it is n