Splash Screen Size for Mobile

Hello:
Anyone knows the suggested size for a mobile splash screen. I am experimenting development using "Burrito".
Thanks for any help.

hi
canvas.getWidth() for getting width of the screen.
canvas.getHeight() for height.
but u have to sure that if u are using canvas.setFullScreenMode(true) for using fullscreen (also command area) then write this getwidth() and getHeight() after writing setFullScreenMode()
Note : there is some devices like motorola a1000 and e1000 like not giving actual screen size if u are using setFullScreenSize(true) , they are giving only actual screen size (without command area).
hope u get the answer from this ..
regards
Akash kumar
Indiagames Ltd
India.
[email protected]

Similar Messages

  • Why isn't there a mobile version / screen size for apple support communities ?

    Why isn't there a mobile version / screen size for apple support communities ?

    GOD!
    I have the same problem and I've been trying to find a way around it for about...4 hours now. It's driving me nuts!
    Is there anything that can be done? Can I really not use the nano b/c of my operating system? that seems nuts to me!
    am totally bummed out as mine was a gift as well and now I have to return it...

  • Changing screen size for screen sharing

    Is there a way to change the screen size for screen sharing?
    I have a 13" macbook and a G5 with a 20" monitor. When I use RDC to a PC it automatically adjusts to use the full screen on the G5 and when I use VNC to a linux system I can create a vncserver with any arbitrary geometry that I want, but when I use screen sharing all I seem to be able to get is a 13" screen. I can use JollysFast VNC, and view it full-screen, but it's still just 1280x800.
    So, is there anyway to create a virtual window so that I can take better advantage the screen on my G5 when screen sharing to my macbook?
    Thanks,
    Rob

    Well, the question should really have been, "What is the ideal page width for the iPad?".
    The answer is that there isn't one since the iPad, like most portable devices, has two screen widths depending on whether its used in portrait or landscape mode.
    If you are designing a layout specifically for the iPad, one solution is to use a folding design where the sidebar folds down to the bottom in portrait and jumps back up to the side in landscape. This will only work for personal computers and iPads.
    The popular way of designing a layout to suit a large range of portable devices is to use a liquid, or semi liquid, layout that will automatically adjust to the fixed width browsers used on these devices.
    Something like this...
    Neither of these methods are possible using a template based editor like iWeb and this is probably one of the main reasons that Apple has given up on the application. Surfing the internet on mobile devices is growing daily and its now become essential to have a mobile version of your website or one that can be viewed on all devices.

  • Why screen size for iPhone simulator is still 480x320 pixels?

    Hi,
    I just upgraded my xcode to 4.2.1 so I have iOS SDK 5.0 now. However, when I create a project, the screen size in simulator for iPhone is 480x320 pixels. I was told the screen size for iPhone/iPad is now 960x640 pixels. Why in simulator it is still old size? What should I do to get the correct size or I am wrong and the actual device is still 480x320 pixels? Thanks.
    Regards,
    Taizhi

    hi,
    you change between "iPhone" and "iPhone retina" to simulate both physical resolutions.
    For the project it doesn't matter because the logical resolution is still 320 x 460 "Points". The OS does most of the work for you.
    I suggest reading: this: http://developer.apple.com/library/ios/#documentation/2DDrawing/Conceptual/Drawi ngPrintingiOS/SupportingHiResScreens/SupportingHiResScreens.html#//apple_ref/doc /uid/TP40010156-CH15
    Dirk

  • Screen Size for a mobile

    Hi All,
    I am developing a reader software for mobiles. I want to make the page four times bigger than the mobile screen. The size of the page will depend on size of the screen.
    How do i get the size of the screen for any mobile i use.IS there any standard method to get the size of the screen.
    Can u guys help me out with this.
    Bye,
    Sangram

    hi
    canvas.getWidth() for getting width of the screen.
    canvas.getHeight() for height.
    but u have to sure that if u are using canvas.setFullScreenMode(true) for using fullscreen (also command area) then write this getwidth() and getHeight() after writing setFullScreenMode()
    Note : there is some devices like motorola a1000 and e1000 like not giving actual screen size if u are using setFullScreenSize(true) , they are giving only actual screen size (without command area).
    hope u get the answer from this ..
    regards
    Akash kumar
    Indiagames Ltd
    India.
    [email protected]

  • ITS mobile - Screen size on mobile device is too small

    Hi,
    I'm not able to change the screen size of my ITS Mobile application.
    If somebody can help me ...
    Here are the data:
    Internet service parameters
    ~DYNPRO_COMPRESSION : 1
    ~GENERATEDDYNPRO : 0
    ~ITSMOBILE : 1
    ~ITSMOBILEELEMFACTOR : 9
    ~ITSMOBILEELEMUNITS : px
    ~SOURCES : ZSAPLOG_MOBILE,ITSGENMOBILE4
    ~THEME : 99
    ~TRANSACTION : ZSAPLOG_MOBILE
    Internet service templatesGenerating style: MOBILE4 (Mobile Device (No HTML tables))
    ICF service - GUI Configuration
    ~THEME : 99
    ~TRANSACTION : ZSAPLOG_MOBILE
    ~ITSMOBILE : 1
    ~SOURCES : ZSAPLOG,ITSGENMOBILE4
    ~ITSMOBILEELEMFACTOR : 9
    ~ITSMOBILEELEMUNITS : px
    ~POPUPS : 1
    ~SHOW_SYSTEM_MODAL : 1
    ~STYLE : DHTML
    LRFMDscreen size is set to 16x20ITS
    Versions
    SAP_BASIS : SAPKB73108
    SAP NETWEAVER : SAP EHP3 FOR 7.0
    Mobile device
    Model : PIDION HM50 E
    CPU : Samsung Electronics(R) S5PV210
    OS : WEHH 6.5 Professional
    VER : Windows CE 5.2.29077
    Thanks for your help
    Philippe

    Perhaps an option to set the default font for discussion threads in the user preferences would be the best idea. One would think however that the Jive developers would have come up with something like that already.
    For what it's worth:
    http://www.w3.org/QA/Tips/font-size
    Do not specify the font-size in pt, or other absolute length units for screen stylesheets. They render inconsistently across platforms and can't be resized by the User Agent (e.g browser). Keep the usage of such units for styling on media with fixed and known physical properties (e.g print).
    Once again, I wonder about Jive development. Anyway, 10 pt is not best practice. It's standard for printed media, but not for screens. A search in Google shows that most recommend 16 pixels or more. Not sure what this is in points. I think 10 points is about 12 pixels, depending on screen dpi/ppi. I cannot imagine how tiny 10 pt must look on any of the high resolution Retina displays, which have twice or more density than conventional 72 dpi.

  • Best Adobe Captivate Screen Size for all Devices?

    Which would you say is the best screen size to use to cater for all device types (pc, laptop, tablet, mobile, etc.)?
    Thanks.

    Hi there,
    You can select any moderate screen size and publish the course and on the publish dialog box, check "Scalable HTML content" (only in case of .swf, HTML5 and PDF).
    If you are not sure about which screen size to choose and you are creating a course for large audience for devices and systems of different resolution, then  800 X 600 is recommended.
    But now, with scalable HTML content checked, your course window will fit to the screen size of the device, and there will not be any scroll bar.
    Thanks.

  • How to avoid maximal expand of screen size for welcome screen? VmWare prob?

    I run Suns Solaris Express Edition for VmWare under WinXP.
    When I start Solaris VM everything is fine except the fact that the welcome screen at boot up (= the screen where the user has to enter his login and password) is expanded to approx 2400 x1600 pixel).
    I have to use the horizontal scrollbar to get the entry fields for login and password.
    After I entered correctly login and password Solaris retrieves the internal correct display size
    of 1280 x 960 and shrinks the screen size accordingly.
    So again everything is fine from this time except the screen size at the beginning.
    Is this an error of VmWare or of Solaris?

    I agree that iMovie's still image quality is embarassingly bad and has many bugs.
    Even with no Ken Burns, the sharp images tend to flicker on a TV because iMovie doesn't blur them properly.
    And as you very well described, iMovie's Ken Burns produces uneasy zooms/pans because the subpixel rendering is, uh, suboptimal.
    iMovie's immortal rendering bug when exporting non-Ken Burns'ed images to iDVD/tape doesn't make things any better.
    Yes, bicubically downsampling the input images to 640x480 or adding gaussian blur to the megapixel input images takes care of the flicker and uneasy zooms/pans, but as a side-effect the maximal zoom-ins are then TOO blurry.
    The best workaround is to use Photo To Movie's higher quality export setting. It has the best quality rendering engine (I recently compared it to Still Life and FotoMagico). Disclaimer: I'm just a satisfied customer of Photo To Movie.
    See also:
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow

  • What screen size for revealing scroll effects?

    Hello,
    I'm currently designing a website in Muse for a motion graphics company which has quite a few scroll effects.  As the user scrolls down (it's a one page site), elements either fade or animate (edge animate files) onto the page.
    I'm designing it on a 27" screen but of course a lot people will be using smaller screens and laptops so I was wondering what everyone uses as a standard active screen area?
    If I keep all the animations happening in the top 700px, I'm left with a big empty space below when using a larger screen.  Does anyone have any suggestions?
    (I will be doing a tablet and phone version once I've nailed this).
    Thank you

    I would suggest you to go with browser width animation so that it should render same with all screen sizes.
    Thanks,
    Sanjit

  • Ideal Screen Size for Designing application for MAC

    Dear All
    I want to design a new application for MAC versions, like iMAC, MAC book pro, Mack book Air, and there is is various screen sizes, like
    11", 13", 15", 21.5", 27", what is the ideal screen Resolution, is it 2560*1440 or 1920*1080. or what will be the ideal size which will be a clear display in all the machines. I am really confused and I searched and seeked many members info on this but no one is having answer for this.
    please help me.
    Regards
    Lourd

    Hi @BDAqua, thanks for the answer, but I am not sure how I can conclude for 1920*1080, for various screens the resoultion changes. I want to know which is the best suitable screen size I need to take while designing my application, am asking purely in perspective of User Interface Design prototype perspective...
    11.6 - 1366*768
    13.3 - 1440*900
    13.3 - 1280*800
    13.3 - 2560*1600
    15.4 - 1440*900
    15.4 - 2880*1800
    21.5 - 1920*1080
    27 - 2560*1440

  • Increase screen size for SAPMV45A 8309

    Hi,
    I need to add additional fields in additional data B tab in sales order i.e. program SAPMV45A screen 8309.
    but the screen has already occupied 20 Lines/80 columns.
    when i increase the size of the screen to 25 & activate it's not getting completely activated, is it not possible to increase the screen size .
    Regards,
    Raghavendra

    Hi,
      As this is a standard screen provided by SAP do have user fields, you can't increase the screen size, this is a limitation,
    Rgds,

  • V26 - Icon and splash screen sizes

    What are the sizes for v26?
    Thanks in advance.

    Same as before, plus 640x1136 for apps that support the iPhone.

  • Default screen sizes for fuid grid & media query

    Is there a way to change the default sizes in the fluid grid dialog for new pages. I would like to start with a 320px mobile size not 480. (since there are hardly any devices that are 480 as far as I can tell. Changing the tablet size would also be useful.

    If you're talking about the preview screens in DW, click on the values and select or edit new ones.  See screenshots.
    Nancy O.

  • Correct screen sizes for wallpapers and games on V3m RAZR for Verizon?

    Does anyone know the correct file size (i.e. 176x144) for
    wallpapers and games built for a Razr on the Verizon network? I
    know that the Razr is 176x220, but I thought that I remember seeing
    somewhere that the wallpapers should be 176x144 and games should be
    176x204 because of the top banner that is locked on the screen.
    Please advise if you know for sure. The lastest doc that I read
    about Verizon said that the status bar took 16pixels. Does anyone
    know for sure?

    I read this from a brew device data sheet on the V3m:
    The display height is 220 pixels. The number of pixels for
    status area is 16 pixels in height, so the height for BREW
    application display area is (220-16)=204 pixels in height.
    I'm not sure about wallpapers though. It looks that the top
    bar and bottom bar are the same size. I would developer my
    wallpapers at 176x188 (assuming the bottom bar is 16 px as well).
    The secondary display is 96x66. Though, I'm not sure how you
    could access that, if you want to show a small version of a
    wallpaper when its closed.
    C

  • Best screen size for exporting slideshow as pdf

    Help please,I create slide shows for clients and export them in pdf format that are shown to numerours people but who are viewing the slide shows on different size displays ,what are the best settings both in silde show mode and creating and exporting as a PDF( height and width) so the images in the slide show will best and be maximized on all screens ?,size of the exported PDF is not a issue.
    Any help is welcomed,Thanks
    PS will there be any viewing difference ,if a slideshow created on a pc in Lightroom  and shown on a Mac?

    Having just tried to do the same thing, IMHO the Adobe PDF engine does not do the best job of resizing images. I exported at 1200x1600 and on my 1280x1024 screen there were noticeable jaggies on the text. The image itself was less noticeably degraded, but it was. For slide shows I use another product that does a much better job here, but you may not want to add another learning curve to your life.  I think you should go to the PDF forum and ask around for a solution.
    I can't speak to Mac/Pc issues.

Maybe you are looking for