Split PO Line into multiple shipments

Hi ,
I have following situation on our PO.
We create a PO with line info as
ITEM DATE PRICE QTY
ABC 1-JUN-08 100 1000
we provide this to supplier and after their assesment after a week or so supplier gives back tentive ship date
1-JUN-08 300
3-JUN-08 400
5-JUN-08 300.
we have a requirement based on this information. We need to split the PO line automatically using this information...so above line has be to split automatically as following
ITEM DATE PRICE QTY
ABC 1-JUN-08 100 300
ABC 3-JUN-08 100 400
ABC 5-JUN-08 100 300
can we do this using PO Open Interface?
I have checked PO_CHANGE_API1_S. This API allows to update the existing shipment. I need to know how to add a new shipment.
We are using R12.
Thanks.

shipments can be added to the pO
suppose u have 1000 qty on th epo line
IF u go to the shipments tab, there would be one line there with 1000 qty , ship to and bill to
edit the 1000 quantity to 300 and move to next line, the balnce of 700 would appear automatically..
edit the 700 to 400 and move no next line..balance of 300 would appear automatically..u can alao entre needby dates ,ship to loc and bill to loc there
Hope that helps

Similar Messages

Split the IDOC into multiple IDOC if the IDOC has more than 500 records

Hi All,
I developed an outbound IDOC in which we are facing an issue.
There is some limitation on the maximum idoc size it can handle.
If number of records is more than 500, split the idoc into multiple iDoc's, e.g. if it would have 1300 records , the result would be 2 iDoc's with 500 records, and the last one would have 300 records
How can i acheive this.
Regards
Jai

Hi,
1) first you need to know which message type/Idoc type you are triggering.
2) Get the Corresponding processcode from Partner profiles(WE20/ WE41).
3) Then the look for prper user-exit in the related processing FM.
4) write logic to split the IDoc accordingly.
if no proper user exit available then copy the standard processing FM and need to all ALE related configurations.
Catch hold any ABAP expert in your team to do all these.
Suresh

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

Split a record into multiple records

Hi,
I have situation where i need to split a record into multiple records.
InputData :
value|BeginDate |EndDate
15 |2002/10/15|2002/10/16
13 |2002/10/13|2002/10/20
19 |2002/10/19|2002/10/23
10 |2002/10/10|2002/10/12
OutPut :
10 |2002/10/10|2002/10/12
13 |2002/10/13|2002/10/15
15 |2002/10/15|2002/10/16
13 |2002/10/16|2002/10/19
19 |2002/10/19|2002/10/23
Thanks

Hi ,
As a far I understood from your example ,
I have few questions...
1. You have information about the patient in a 1 source table.
2. how u are identifying for patient X u need 5 rows to be created. R u storing these informations in seprate table or how ...
3. if you have these information in a seperate tables ..... a simple cross join in ODI should get you the expected result.....
Or give some more information with a example ..that would be great ...
Thanks

Split one row into multiple columns

Hi,
Data in one CLOB column in a table storing with delimiter, ##~~##. Ex. ##~~##abc##~~##defgh##~~##ijklm##~~##nopqr (data starts with delimiter). Please help me to split the data into multiple rows like below and it should be in the same order.
abc
defgh
ijklm
nopqr
I am using Oracle 11g.
Thanks.

Thanks Hoek for your response. Before posting my question in the forum, I tried similar query. It is working with one character as delimiter.
with test as (select 'ABC,DEF,GHI,JKL,MNO' str from dual )
select regexp_substr (str, '[^,]+', 1, rownum) split
from test
connect by level <= length (regexp_replace (str, '[^,]+')) + 1;
Above query is giving correct result by fetching 5 rows. I have modified the query like below...
with test as (select 'ABC,,,DEF,,,GHI,,,JKL,,,MNO' str from dual )
select regexp_substr (str, '[^,,,]+', 1, rownum) split
from test
connect by level <= length (regexp_replace (str, '[^,,,]+')) + 1;
Above query resulting 13 rows and last 8 rows are nulls. Number of null rows are increasing, if I increase number of characters in delimiter. Could you please tell me how to avoid those null rows.
Thanks.

Split single row into multiple rows containing time periods

Hi,
I have a table with rows like this:
id, intime, outtime
1, 2010-01-01 00:10, 2010-01-3 20:00
I would like to split this row into multiple rows, 1 for each 24hr period in the record.
i.e. The above should translate into:
id, starttime, endtime, period
1, 2010-01-01 00:10, 2010-01-02 00:10, 1
1, 2010-01-02 00:10, 2010-01-03 00:10, 2
1, 2010-01-03 00:10, 2010-01-03 20:00, 3
The first starttime should be the intime and the last endtime should be the outtime.
Is there a way to do this without hard-coding the 24hr periods?
Thanks,
Dan Scott
http://danieljamesscott.org

Thanks for all the feedback, Dan.
It appears that the respective solutions provided will give you: a) different resultsets and b) different performance.
Regarding your 'truly desired resultset' you haven't answered all questions from my previous post (there are differences in the provided examples), but anyway:
I found that using CEIL or ROUND makes quite a difference, using my 'simple 3 record testset' (30 records vs. 66 records got initially returned, that's less than half of the original). That's quite a difference. However, I must call it a day (since it's almost midnight) for now, so there's room for more optimizement and I haven't thoroughly tested.
But this might hopefully make a difference performancewise when compared to my previous 'dreaded example':
SQL> drop table t;
Table dropped.
SQL> create table t as
2 select 1 id, to_date('2010-01-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-01-03 20:00', 'yyyy-mm-dd hh24:mi') outtime from dual union all
3 select 2 id, to_date('2010-02-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-02-05 20:00', 'yyyy-mm-dd hh24:mi') outtime from dual union all
4 select 3 id, to_date('2010-03-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-03-03 00:10', 'yyyy-mm-dd hh24:mi') outtime from dual;
Table created.
SQL> select id
2 ,      max(intime)+level-1 starttime
3 ,      case
4           when level = to_char(max(t.outtime), 'dd')
5           then max(t.outtime)
6           else max(t.intime)+level
7         end outtime
8 ,      level period
9 from   t
10 connect by level <= round(outtime-intime)
11 group by id, level
12 order by 1,2;
        ID STARTTIME           OUTTIME                 PERIOD
         1 01-01-2010 00:10:00 02-01-2010 00:10:00          1
         1 02-01-2010 00:10:00 03-01-2010 00:10:00          2
         1 03-01-2010 00:10:00 03-01-2010 20:00:00          3
         2 01-02-2010 00:10:00 02-02-2010 00:10:00          1
         2 02-02-2010 00:10:00 03-02-2010 00:10:00          2
         2 03-02-2010 00:10:00 04-02-2010 00:10:00          3
         2 04-02-2010 00:10:00 05-02-2010 00:10:00          4
         2 05-02-2010 00:10:00 05-02-2010 20:00:00          5
         3 01-03-2010 00:10:00 02-03-2010 00:10:00          1
         3 02-03-2010 00:10:00 03-03-2010 00:10:00          2
10 rows selected.
SQL> By the way: I'm assuming you're on 10g, is that correct?
Can you give us some information regarding the indexes present on your table?

How to Split 1 Order into Multiple Deliveries based on Partner Function ?

Hello,
How can I split one Sales Order into multiple deliveries, based on the partner function "managed by" ?
The requirement is that one order will be created for different "managed by".
If partner function "managed by" is same at line item level in order, than the items having same "managed by" can be combined in one delivery, else delivery will split and multiple deliveries will be created from 1 Order.
Jatin Mistry

Hi,
You need to create a new requirement in tcode VOFM for that, together with your ABAP consultant. This requirement will be used in copy contol.
http://saptechsolutions.com/pdf/VOFMCopyRequirementRoutines.pdf
MdZ

Split delimited file into multiple structures

Hi experts,
I have a delimited text file that has multiple row types - each row contains only one structure, but there could be 10 different row types (structures) in the file. I can figure out which structure each row belongs. Just need to come up with a way to dynamically split each line.
I am trying to stay away from:
case 'row type'
when 'structure A'
    split into A1, A2, A3...
when 'structure B'
    split into B1, B2, B3...
end with.
Rather, create a routine accepting file line and structure (or structure name) that returns the structure with data populated.
Any suggestions?
Thanks,
Hyun Kang

This may give you some ideas.
report zrich_0001.
data: begin of itab1 occurs 0,
      fld1(10) type c,
      end of itab1.
data: begin of itab2 occurs 0,
      fld1(10) type c,
      fld2(10) type c,
      end of itab2.
data: begin of itab3 occurs 0,
      fld1(10) type c,
      fld2(10) type c,
      fld3(10) type c,
      end of itab3.
data: tab_name type string.
data: istr type table of string with header line.
data: isplit type table of string with header line.
field-symbols: <dyn_tab> type table,
               <dyn_wa>,
               <fs>.
start-of-selection.
call function 'GUI_UPLOAD'
       exporting
            filename = 'C:test.txt'
       tables
            data_tab = istr.
loop at istr.
    split istr at ',' into table isplit.
    read table isplit index 1.
    concatenate isplit '[]' into tab_name.
    assign (tab_name) to <dyn_tab>.
    assign (isplit) to <dyn_wa>.
    delete isplit index 1.
    loop at isplit.
      assign component sy-tabix of structure <dyn_wa> to <fs>.
      if sy-subrc <> 0.
        exit.
      endif.
      <fs> = isplit.
    endloop.
    append <dyn_wa> to <dyn_tab>.
endloop.
loop at itab1.
    write:/ itab1-fld1.
endloop.
loop at itab2.
    write:/ itab2-fld1, itab2-fld2.
endloop.
loop at itab3.
    write:/ itab3-fld1, itab3-fld2, itab3-fld3.
endloop.
My file looks like this.
ITAB1,Value1
ITAB1,Value2
ITAB2,ValueA,ValueB,
ITAB2,ValueC,ValueD,
ITAB3,ValueR,ValueS,ValueT
ITAB3,ValueU,ValueV,ValueW
You can see in this program, that the first column drives what internal table the data is written to for that line.
Regards,
RIch Heilman

Split MP3 file into multiple MP3 files

I've been through the help section and is till cant seem to figure out how to split a large (2 hour) mp3 file into multiple mp3 files.
I have a 2 hour MP3 recording (Stereo not mono), and I have added markers (by simply pressing keyboard shortcut 'M' to add marker), but now I would like to know how to split that one mp3 files into multiple files from the markers which I have made...
All my marker types are "Cue" when i pressed 'M' at the locations I want the track to end/start

You didn't say which version of the program you're using, but in general, there is a way to do this by adding one additional cue at the very end of the file, then "merging" the cues (which converts the space between each cue into a "range"), and batch processing each range out to a separate file. (Make sure there's a cue at the beginning of the file, or at least the first material you want in a new file.)
Now that you've done all that work, I'm going to tell you that what you're doing is probably a bad idea. Opening any mp3 in Audition and resaving back to mp3 means you've doubled the losses and distortion inherent with the mp3 compression. Audition can't do lossless editing of mp3s. The bottom line: are you really splitting the file, and does the result have to be mp3 format? If saving to a (wave file, or any other lossless format, then what I'm saying doesn't matter.
In any case, "mp3 Direct Cut" is a terrific freeware program that does lossless mp3 editing, and I'd highly recommend you try it. It's saved my neck a number of times. See http://www.mpesch3.de.

C# Split xml file into multiple files

Below i have an xml file, in this file, i need to split this xml file into multiple xml files based on date column value,
suppose i have 10 records with 3 different dates then all unique date records should go into each file . for ex here i have a file with three dates my output should get 3 files while each file containing all records of unique date data. I didn't get any idea
to proceed on this, thats the reason am not posting any code.Needed urgently please
<XML>
<rootNode>
<childnode>
<date>2012-12-01</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-01</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-02</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-03</date>
<name>SSS</name>
</childnode>
</rootNode>
</XML>

Here is full code:
using System.Xml.Linq;
class curEntity
public DateTime Date;
public string Name;
public curEntity(DateTime _Date, string _Name)
Date = _Date;
Name = _Name;
static void Main(string[] args)
XElement xmlTree = new XElement("XML",
new XElement("rootNode",
new XElement("childnode",
new XElement("date"),
new XElement("name")
string InfilePath = @"C:\temp\1.xml";
string OutFilePath = @"C:\temp\1_";
XDocument xmlDoc = XDocument.Load(InfilePath);
List<curEntity> lst = xmlDoc.Element("XML").Element("rootNode").Elements("childnode")
.Select(element => new curEntity(Convert.ToDateTime(element.Element("date").Value), element.Element("name").Value))
.ToList();
var unique = lst.GroupBy(i => i.Date).Select(i => i.Key);
foreach (DateTime dt in unique)
List<curEntity> CurEntities = lst.FindAll(x => x.Date == dt);
XElement outXML = new XElement("XML",
new XElement("rootNode")
foreach(curEntity ce in CurEntities)
outXML.Element("rootNode").Add(new XElement("childnode",
new XElement("date", ce.Date.ToString("yyyy-MM-dd")),
new XElement("name", ce.Name)
outXML.Save(OutFilePath + dt.ToString("yyyy-MM-dd") + ".xml");
Console.WriteLine("Done");
Console.ReadKey();

Split XSLT Output into Multiple Files

I have an XML-to-File scenario working, but now I need to split my XSLT map output into multiple files based on the data. I have been reading the Jin Shin blog on message splitting, but don't know that it pertains to my situation.
XML data getting mapped with XSLT map creates output formatted like this.
<?xml version="1.0" encoding="utf-8"?>
<ns1:ColdInvoiceData xmlns:ns1="http://graybar.com/cold/invoice">
<Header>
<RecordID>HDR</RecordID>
<InvoiceNumber>15</InvoiceNumber>
</Header>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>001</LineItemNumber>
<UnitPrice>1.25</UnitPrice>
</Details>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>002</LineItemNumber>
<UnitPrice>2.22</UnitPrice>
</Details>
<Header>
<RecordID>HDR</RecordID>
<InvoiceNumber>16</InvoiceNumber>
</Header>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>001</LineItemNumber>
<UnitPrice>3.33</UnitPrice>
</Details>
</ns1:ColdInvoiceData>
I currently have this output writing to a file (FTP, File Conversion). A single file is no issue, but I need to send multiple files for every set of HDR/DTL(s). I also need to put the invoice number in the filename (which is working fine as a parameter in my single FTP File CC now).
Can I make this happen with message splitting and maybe a second map (GUI map)? Do I need to adjust the XSLT output XML format to have an invoice level? Is there a better way to go?
Thanks!

I made a change to the namespace used on the Messages/Message1 nodes (since the system-assigned ns0 was already being used in my xml data) and now I am getting output.
The problem is that the output matches my input. As aforementioned, I started with just a one-to-one mapping on every node and field.
When I change the mapping to try to force multiple ColdInvoiceData nodes, I get the following error (when my source has two Invoice nodes):
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:ColdInvoiceData[2]/Invoice. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at
When my source has one invoice node, it works ok.
Here is a screenshot of my mapping structure.
http://webpages.charter.net/kpwendel2/ib.jpg

How can i prevent itunes from splitting individual albums into multiple albums?

How do prevent itunes from splitting albums with various artists into multiple albums?
Thanks for your help!

It's probably better to put Various Artists into the Album Artist box rather than just "various". Make sure it's the Album Artist field though. In addition, you need to mark the album as a compilation. When setting the complete album, the Part of a compilation is on a drop-down menu on the File/Get Info/Options tab:
but if changing just one song, it's a tick-box on the Info tab:
and needless to say, the album name must be exactly the same for each track.

Easy Question: How to split concatenated string into multiple rows?

Hi folks,
this might be an easy question.
How can I split a concatenated string into multiple rows using SQL query?
INPUT:
select 'AAA,BBB,CC,DDDD' as data from dualDelimiter = ','
Expected output:
data
AAA
BBB
CCC
DDDDI'm looking for something kind of "an opposite for 'sys_connect_by_path'" function.
Thanks,
Tomas

Here is the SUBSTR/INSTR version of the solution:
SQL> WITH test_data AS
2 (
3          SELECT ',' || 'AAA,BBB,CC,DDDD' || ',' AS DATA FROM DUAL
4 )
5 SELECT SUBSTR
6          (
7                  DATA
8          ,       INSTR
9                  (
10                          DATA
11                  ,       ','
12                  ,       1
13                  ,       LEVEL
14                  ) + 1
15          ,       INSTR
16                  (
17                          DATA
18                  ,       ','
19                  ,       1
20                  ,       LEVEL + 1
21                  ) -
22                  INSTR
23                  (
24                          DATA
25                  ,       ','
26                  ,       1
27                  ,       LEVEL
28                  ) - 1
29          )       AS NEW_STRING
30 FROM    test_data
31 CONNECT BY LEVEL <= LENGTH(REGEXP_REPLACE(DATA,'[^,]','')) - 1
32 /
NEW_STRING
AAA
BBB
CC
DDDD

Splitting a string into multiple parts from particular position (string has no delimiter )

Hello Gurus,
I need to make string of having length 1000 into multiple parts from a particular position which has some text without any delimiter and i want to populate each part into an internal table which has one filed...
eg : string = 'sap abap sap abap sap abap sap abap sap abap sap abap sap abap sap sap sap abap sap abap'
suppose i want to start splitting from 40th position...assume that i have 3 parts
and these 3 parts i have put into an internal table..
lt_itab = [sap abap sap abap sap abap sap abap,
              sap abap sap abap sap abap sap abap,
               sap abap sap sap sap abap sap abap]
plese help!
any help would be Appreciated ...thank you

Hi,
Try this code.
TYPES: BEGIN OF ty,
        b TYPE string,
        END OF ty,
        tt TYPE STANDARD TABLE OF ty.
DATA: a TYPE string VALUE 'aaa bbb ccc ddd eee fff ggg hhh iii jjj kkk lll',
       tb TYPE tt,
       wa TYPE ty,
       off TYPE i,
       len TYPE i,
       count TYPE i,
       count1 TYPE i,
       temp TYPE i.
len = 8.                      "Position
off = 0.
count = strlen( a ).
count1 = count / 8.
temp = len - 1.
DO count1 times.
temp = off + len.
IF temp > count.
   wa-b = a+off.
ELSE.
   wa-b = a+off(len).
ENDIF.
off = off + len.
SHIFT wa-b LEFT DELETING LEADING space.
APPEND wa to tb.
ENDDO.
LOOP AT tb INTO wa.
write: / wa-b.
ENDLOOP.

Split 1 column into multiple columns

Hi
How can we acheive this in Sql:
Col 1
abc def ghi jkl
convert to:
Col 1
Col 2
Col 3
Col 4
abc
def
ghi
jkl
Royal Thomas

The best approach is to NOT split them out into individual columns... It violates the 1st normal form...
Under first normal form, all occurrences of a record[sic] type must contain the same number of fields[sic].
First normal form excludes variable repeating fields[sic] and groups.
The better approach is to split them into rows, in their own table, with a foreign key reference back to the table you are pulling them away from.
If you check my 1st post you'll see that I split the string with a function. That same a function can be used to populate the new table.
Something along these lines...
IF OBJECT_ID('tempdb..#BadOldDesign') IS NOT NULL
DROP TABLE #BadOldDesign;
CREATE TABLE #BadOldDesign (
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY,
ListOfCodes VARCHAR(100) NOT NULL
INSERT #BadOldDesign (ListOfCodes) VALUES
('abc htr tbj yfd hjk mth'),
('bbb hyt tbj vyk hjk htd'),
('vvv nud'),
('yyy hyn tbj bdr '),
('htr htf tbj yfd hjk mko'),
('kio bhn tbj bjd hjk'),
('byd loj tbj yfd hjk cds');
SELECT * FROM #BadOldDesign bod
IF OBJECT_ID('tempdb..#ShinyNewTable') IS NOT NULL
DROP TABLE #ShinyNewTable;
SELECT
bod.ID,
sc8.ItemNumber,
sc8.Item
INTO #ShinyNewTable
FROM
#BadOldDesign bod
CROSS APPLY dbo.SplitCSVToTable8K(bod.ListOfCodes, ' ') sc8;
ALTER TABLE #ShinyNewTable ALTER COLUMN id INT NOT NULL;
GO
ALTER TABLE #ShinyNewTable ALTER COLUMN ItemNumber INT NOT NULL;
GO
ALTER TABLE #ShinyNewTable ADD CONSTRAINT pk_ShinyNewTable PRIMARY KEY CLUSTERED (ID, ItemNumber);
SELECT * FROM #ShinyNewTable snt
The dbo.SplitCSVToTable8K function that I'm using can be found here... http://www.sqlservercentral.com/articles/Tally+Table/72993/
HTH,
Jason
Jason Long

Split PO Line into multiple shipments

Similar Messages

Maybe you are looking for