Splits for aggregates in rsrt

When I go to RSRT and execute+debug my query, with aggregates selected, it shows splits like split1, split2 etc. What does the split mean?

Each split is like a small sub-query telling you the parameters used in that particular part of the query. Depending on how your aggregates are set up then one aggregate may be sufficient for a number of 'splits'.
If you have 'Fixed' parameters on then you may find an aggregate is sufficient for most splits but if you have values hard coded then the aggregate is less likely to be useful for many splits.
You need to find a balance between putting in place appropriate aggregates, without building aggregates that are so big they become almost useless.
The number of splits you see in RSRT is determined by your query definition, not by your aggregates.
Hope I have understood your question
Dave

Similar Messages

WT reporter does not show split for tax authorities!

Dear all:
I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
Do you have any work around for this?
I would appreciate any tip or workaround on this,
Thank you!

Hi
1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
br, Ajay M

Deactivate document splitting for company code in IDES

Hi,
am not able to deactivate document splitting. When I try to deactivate and then save an error pop up show the message 'Define the commitment item as a document splitting characteristics ' .
The path for Deactivating the Doc splitting is
SPRO---Financial Accounting(New) --- GL Accounting(New) -Business transactions-- Document splitting -
Activate document splitting------ Double click on Deactivation per company code.
When i try in this path it will not allow me to save and it will not allow me to post any g/l entry also.
Please Advise.

I think the error is coming due to the other company codes for which document splitting is active. Because, when you save (after deactivating doc split for your company code), I guess the system is checking the properties for other company codes in the same screen for which doc split is not deactivated.
What document splitting characteristics do you have in your system? And what are the settings there? Check in SPRO -> Financial Accounting (New) -> GL Accounting (New) -> Business Transactions -> Document Splitting -> Define Document Splitting Characteristics for GL Accounting. My guess is there is nothing in there. Create (may be, PRCTR) as your document splitting characteristic, save, and then try deactivating doc split for your company code in the IMG node that you mentioned. Not sure if this is the reason, but no harm in trying!

Document Split for Currency Exchange while posting Incoming payment

Hi Experts,
Scenario:
> Post incoming Customer payments using F-28
> posting entered today (14 Jan 2009), but posting date is 30 Dec 2008)
> Tested in Clients 001 and 005 (same setup in terms of GLs, Customers, Vendors, etc)
I was able to post the incoming payment in Client 005. However, in Client 001, I got error message:
*Ex.rate diff.accts are incomplete for account 0000140000 (Trade Debtors/Customers) currency SGD
Message no. F5063
Diagnosis
The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
System Response
The system cannot generate the exchange rate difference posting.
Procedure
By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards.
Proceed*
When I clicked Proceed, the system took me to OBA1, with "Document Split for Currency Exchange" option highlighted in blue.
Does this mean that I need to create a new GL account to post Document Split for Currency Exchange?
Note: Setup for OBA1 both 001 and 005 are the same. But I only encountered the error in 001.
Hope someone can help me.
Thanks...

problem solved: add relevant Open Item GLs in OBA1 (Account Determination for OI Exchange Rate Differences)

Delivery Split for PO

I want to split delivery creation for 'NL' type of delivery for STPO i.e. 'UB' type.
i.e. if a PO has 2 materials with different material types ( e.g FERT & HAWA ), then 2 different deliveries have to be created in this case automatically.
How can the same be achieved.

If you want a permanent Solution on this you will have to take the help of a Routine.
If you want to manually force a delivery split for each line item in the Purchase Order, then give a different value in the "Unloading Point" field for each item.
Unloading Point field is there at Item level in the Shipping Tab in PO.
There are positives and negatives of this approach.
Positive being that since Unloading Points are different for each line item in PO, there will be a seperate delivery for each line item.
Negative is that since the Unloading Field value is defaulted from the PO into the delivery at header (Goto>Header>shipment) you will have a seperate Invoice for each delivery as the Unloading points are different for each delivery. You will not be able to have a consolidated Invoice.

Avoid billing split for different partners

Dear all,
I'd like to avoid invoice split for 2 billing items whose partner function (VE) in a sales order are different.
I tried to create a routine in the copy control in VOFM, but it seems that the value of the partner (VBPA-PERNR) could not be passed into the routine.
Am I do it a wrong way? Is there any other method, e.g. change the standard program "MV60ATOP" ??
Please kindly advise. Thanks!

Hi,
I think, billing split based on the partner is the standard functionality and you cannot over-ride this using custom routine.
Regards
Vinod

Batch splitting for Outbound delivery using BAPI_OUTB_DELIVERY_CHANGE

Hi all,
Let me explain the scenario first.
We are going to create a delivery in SAP with some line items and send it to a non-sap third party WMS. They will pick the goods and send the delivery confirmation back to SAP. In SAP we need to delivery confirmation and PGI.
The problem is when the third Part WMS does a batch split for a particular line item, we need to update the same in SAP and then do the PGI. For this I was trying to use BAPI_OUTB_DELIVERY_CHANGE to create split batches. It is splitting the batches but the overall pick status is becoming B (Partially picked). SO it is not allowing to do the PGI.
Can anyone solve my problem

Hi Bala,
make sure you are setting...
itemdata-dlv_qty
itemdata-dlv_qty_imunit
itemdata-fact_unit_nom e.g = 1.
itemdata-fact_unit_denom e.g = 1.
Rgds
Glenn

Budget Report to show the fixed and variable split for Materials

Hello Gurus,
Could you tell me if there is a budget standards report that will show the fixed and variable split for Materials? Example: Labor, Equip., QC and Overheads?
I need it for the correctly rolled-up 'final material number' step. The report that does this now (without fixed and var split) is the Indented BOM Comparison (sret - cost mgmt-product costing - cost mgmt-customized reports - cost estimate comparison - costed multilevel compare rpt - Indented BOM Comparison).
Thanks,
Jefferson

one simple way is in your final itab declare a slno type i field
data : begin of itab occurs 0,
slno type i,
<other fields>
end of itab.
after filling the data in itab.
loop at itab.
itab-slno = sy-tabix.
modify itab.
endloop.
in fieldcatalog also you have to define that slno field as the first column.
but it will change its order if you are sorting the output or filtering the output.
regards
shiba dutta

Error in CK11n - The system could not determine a cost component split for

Hi All,
When i run CK11n i have following error:
The system could not determine a cost component split for the internal activity with activity type 502000 of cost center 10100.
Procedure
Check the master data for activity type 502000 of cost center 10100. It is possible that no activity price calculation has been carried out for the cost center.
could any one give me solution
Thanking you.

Well, did you run activity price calculation for the relevant cost center(s)?
The CCS you're using for product costing (either your COGM split, or the auxillary) has been marked as a "primary" cost component split. It wants to break secondary costs down into their cost components, and assign those components to components in its own structure.
Wihout a planned CCS for the activity, this isn't possible. (This is normally calculated by KSPI during planning.)
Either calculate an activity CCS is KSPI, assuming that all the prerequisites are in place for that, or uncheck the "primary cost component split" indicator in your costing variant configuration.

Need to apply Batch split for deliveries.Please suggest

I had tried to apply batch split for delivery using the function module 'BAPI_OUTB_DELIVERY_CHANGE'.After running the program i get a message saying 'Batch split is done for a decentralised system - WMS' and the delivery can be seen only in display mode where the change is disabled.
Please suggest solution to apply batch split and view it normally.
Points will be awarded for helpful answers
Edited by: venkata on Apr 10, 2008 10:52 AM

thanks

Excise invoice getting split for every 2 line items in J1IS

Dear Experts,
While doing J1IS - Excise invoice getting split for every 2 line items.
can anybody help me.
regards,
sri ram

Hi,
Please check the maximum number of line items per excise invoice under customizing
logistics general->Tax on goods movement->India->Basic settings->Maintain excise registration->check for EI items.
I think it is defined as 2.
Regards,
Krishna A S V

Standard tables used for Aggregates

Could anyone please help give me a list of all the STANDARD TABLE which are associated with AGGREGATES in BIW 3.x.

Hi,
RSDDAGGR                       Status of the active aggregates in the Infocube
RSDDAGGRCOMP                   Description of the aggregates
RSDDAGGRDIR                    Directory of the aggregates
RSDDAGGRDIR_M                  Directory of the aggregates
RSDDAGGREF                     Aggregates, useable InfoObjects
RSDDAGGRENQUEQUE               Table to define lock argument
RSDDAGGRMODSTATE               Status of change run for aggregates
RSDDAGGRT                      Aggregate texts
RSDDCVERREPAGGR                Aggregates that should be refilled after c
RSDDSTATAGGR                   Statistics data BW for aggregate selection
RSDDSTATAGGRDEF                Statistics data OLAP: Navigation step / ag
RSDMESC_AGGR_IND               Aggregated Data: Indexes
RSDMESC_AGGR_VAL               Aggregated Data: Values for Indexes
RSDPAGGR                       Index of Dummy Aggregate from InfoCubes wi
RSICAGGR                       Aggregation management of the IC for the M
RSICAGGR2                      Aggregation administration for aggregates
Thanks,
-VIjay

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

Transport order split for quantities

Hi @all
I hope anyone can help me with a small problem. Is it possible to create an transport order split for quantities only with customizing or do i need to use a user-exit like ZXLTOU18?
We want SAP to split a picking transport order to the quantity of 8 pieces by picking from a special storage type. Is this possible?
Kind regards.
Bastian

Hi,
Is your STO in APO system? If so, you may consider to use split heuristic.
If it's in ECC, we recommend you to check in space SAP ERP - Logistics Materials Management (SAP MM) in Enterprise Resource Planning to get more expertized advice.
BR

How to find optimal multi splits for numerical attributes in Decision Tree

Hi experts,
I would like to know how to find optimal multi splits for numerical attributes
in Decision Tree Learning.
For splitting categorical attributes, gini and gain index are used and the splits that
produce the best gain are selected.
However, in case of numerical attributes
how do you find the best splits?????
Please help me !!

Yordan's suggestion is correct, though the documentation is a bit outdated.
You can use the single parameter + sweeper mode or define your own custom ranges in the BDT module with the Parameter Range setting
Regards,
aK

Splits for aggregates in rsrt

Similar Messages

Maybe you are looking for