Splitting a long recording into different songs?

Some friends and I will be recording today and there are a few things I am unsure about.
First, we usually play for about 2 hours nonstop and we will be recording 3 simultaneous tracks. After the session, I would like to export the recording into itunes. But, instead of one 2 hour song, I would like to split it up into multiple songs. How would i do this?
Second, to record nonstop for 2 hours, do i need to adjust the tempo of the recording before we start in order to maximize the time we can record. I thought I saw someone say that you had to lower the tempo to 40 to record for a few hours. I couldn't find the post though so could someone let me know if this is correct?
Thanks!

I would like to split it up into multiple songs.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
I thought I saw someone say that you had to lower the tempo to 40 to record for a few hours
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlength

Similar Messages

HT201066 How can I split a long recording audio file into multiple audio files?

Hi,
How can I split a long recording audio file into multiple audio files?
With Windows I was using Nero software, which is not available for Mac. Is there any similar app for free for Mac?
Thanks!

Hello ingiorgio
You can import the track into GarageBand and then split the tracks there. Once that it is done you can highlight the ruler section and then share the song to iTunes to get them separated out.
GarageBand - Split regions in the Tracks area
http://help.apple.com/garageband/mac/10.0/#gbnd76fcce04
GarageBand - Share songs to iTunes
http://help.apple.com/garageband/mac/10.0/#gbndfb96a96f
Regards,
-Norm G.

Rejected records into different Table.

Hi ,
I have a .ctl file and .txt file. for the normal scenario, I use SQLLDR to load data into my table using ctl file and all rejected records will be sent to bad files. But I wanted all the unloaded or Bad records into different table.
do we have any attributes in sqlldr to accomplish this?
Regards
Bala.

Bala,
You can load bad file (rejected records) in different table with all the column defined as varchar2 using sqlldr or external table. But you have to defined another table with all the columns as varchar2 and load it up using a different sqlldr control file, you can also consider using external table to load bad file (bad records).
Regards

Splitting the single record into multiple records based on validity

Hi Guru's,
basically i am an BI consultant with less knowledge on ABAP, can i request your help on the ABAP task.
I am working on HR module which is integrated with SAP BI, the reports will be executed based on calendar month the requirement is i should split the single record into a multiple records based on validity of the record. basically the HR data would be in data from and date to.
below is the logic
Check whether the start and end date of the record are in the same month and year.
If yes  nothing changes
If no  create multiple records
1st record  original start date of the record u2018till end of that month
Following record  1st of the next month u2018till last day of the month
u2026
Last record  1st of the month u2018till original end date.
All fields will have the same values, only the datefrom and dateto fields change.
Can any one please provide me the same code to proceed on my task.
Thanks and Regards,
Venkat

Hi,
Using Rule group we can split it.
Using Rule Group in SAP-BI Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20rule%20group%20in%20sap-bi%20%20part%20-%201.pdf
Thanks
Reddy

Split the incoming records into partitions

Guru's,
I have a table with around 17,000 records each day to get processed through informatica. All these records are distinct in every attribute and the status of the records will be in 'PENDING_CLEAR'.
My requirement is to read these records into 8 partitions (if possible equal partitions) so that i could run in 8 partitions in informatica.
I have the below options available in informatica
1. Pass through
2. Key range and
3. Database partioning.
Option 2 and Option 3 are not possible, since the data base is not partitioned and i will not be able to provide the key ranges, since the primary key on the table is an auto-increment number.
In pass through i will be reading the same 17000 records across all the pipelines and its a challenge to handle it in infomatica.
Any suggestions of paritioning the records using sql??
Thanks a lot for your time.

>
Yes. But the way informatica has got options to read and process the record it is complicating more. I am trying to sort the issue related to informatica.
>
And that reinforces what I said above: you are likely 'misusing' Informatica if you have that sort of problem.
A middle-tier application like Informatica does not provide a 'one size fits all' solution without making (in some cases serious) performance trade-offs.
Such tools function best when they act as the 'middle man' among multiple databases. Need to do some basic data manipulation and source data from both Oracle and DB2? A tool can access both DBs with separate connections and help you merge or filter the data. The tool can also assist in performing some basic data transformations.
Need to sort data and apply complex business rules? That work should be done in the database.
The primary goal, when working with multiple database sources or targets, is the do AS MUCH work as possible in the DB; that is what the DB is designed for.
Get the data INTO the DB as quickly and efficiently as possible and then do the work there. Mid-tier tools can be very effective at that. They can source data from multiple systems, do basic data cleansing and filtering to reject/fix/report 'dirty' data and they can consolidate multiple data streams to feed ONE target stream.
Tools such as informatica use a proprietary language and syntax. DBs like Oracle and DB2 base their syntax on well-established ANSI standards. There is NO comparison.
Versions of Informatica that I worked with didn't even allow you to access the code very easily. The code for individual businsess rules was locked into the objects it was attached to (some flexibility using maps and maplets). A developer has to 'open' the object in order to get access to the actual code that was being use.
The PL/SQL code used in DBs is readily accessible and easy to access.
The first question I would ask about your issue is: can this work (processing each record) be done in the database. If the answer is yes then that is most likely where the work should be being done. The 'tool' should then be used to do as much 'preprocessing' of the data as possible and then get the cleansed data into the database (into staging tables) as quickly as possible.
If you insist on going the way you are headed you will need to add code to 'chunk' the data.
See my reply if this thread for a description of how to use the NTILE function to do that
Re: 10g: parallel pipelined table func - distributing DISTINCT data sets
And for more discussion of why you should NOT be going this way here is a thread from last year with a question very similar to yours also using Informatica
Looking for suggestion on splitting the output based on rowid/any other
>
I have below query.I need to split total rows pulled by the query into two halves by maintaining data accuracy.
Eg if query returns 500 rows,i need a query which return 250 another with 250.
Reason :
I have a informatica ETL job which pull data by above query and updates into target.Run time is 2hrs
In order to reduce the run time,using 2 pass through partitions which will run the query in two partitions and run time will be reduced to exact 1 hour.
>
Sound familiar? Read what the responders (including me) had to say.

INSERT of two records into different tables (pk value from first to second)

Hi there!
Have probably stupid question
Need to insert one record into table with primary key and then insert into other table record with value of primary key field from first record
How can I do it?
Thanks a lot!!!

You have several possibilities. Most easiest one is listed first :)
SQL> create table a (a number);
Table created.
SQL> alter table a add constraint a_pk primary key (a);
Table altered.
SQL> create table b (a number);
Table created.
SQL> alter table b add constraint b_a_fk foreign key (a) references a(a);
Table altered.
SQL> insert into a values (0);
1 row created.
SQL> insert into b values (0);
1 row created.Though that may not help always, so the next possibility maybe just using sequence with nextval and currval (currval can be used only in the same session and only after you have issued at least one nextval)
SQL> create sequence a_seq;
Sequence created.
SQL> insert into a values (a_seq.nextval);
1 row created.
SQL> insert into b values (a_seq.currval);
1 row created.And you can use also famous returning clause. It is a bit easier to show that in the pl/sql block than pure SQL.
SQL> declare
2   v number;
3 begin
4   insert into a values (a_seq.nextval) returning a into v;
5   insert into b values (v);
6 end;
7 /
PL/SQL procedure successfully completed.And at last contents of the tables :)
SQL> select * from b;
         A
         0
         1
         2
SQL> select * from a;
         A
         0
         1
         2Gints Plivna
http://www.gplivna.eu

Splitting of records into different rows

Hi,
I have a table 'test' which has three columns :
ID varchar2(10), Product varchar2(100), source varchar2(100).
I have provided two sample records below :
ID PRODUCT SOURCE
ID1 | P1,P2 | S1,S2
ID2 | P1,P3 | S2,S3
I need to split the product and source values (they are comma separated) and make different rows out of them. The result set required looks like below :
ID PRODUCT SOURCE
ID1 | P1 | S1
ID1 | P1 | S2
ID1 | P2 | S1
ID1 | P2 | S2
ID2 | P1 | S2
ID2 | P1 | S3
ID2 | P3 | S2
ID2 | P3 | S3
Could someone help me regarding this ? The number of comma separated values will be dynamic and we can have null between two commas too.
Kind regards,
Mainak
Edited by: user11183570 on Jul 14, 2011 4:43 AM

SQL> CREATE TABLE test (ID varchar2(10), Product varchar2(100), source varchar2(100));
Table created.
SQL> insert into test values ('id1','P1,P2','S1,S2');
1 row created.
SQL> insert into test values('id2','P1,P3','S2,S3');
1 row created.
SQL> commit;
Commit complete.
SQL> WITH tbl AS
( SELECT DISTINCT id col1,
    regexp_substr (product, '[^,]+', 1, level) col2 ,
    source col3
FROM test
    CONNECT BY level <= LENGTH (regexp_replace (product, '[^,]+')) + 1
SELECT DISTINCT col1,
col2,
regexp_substr (col3, '[^,]+', 1, level) col3
FROM tbl
CONNECT BY level <= LENGTH (regexp_replace (col3, '[^,]+')) + 1
ORDER BY 1; 2    3    4    5    6    7    8    9   10   11   12   13

How to split one long file into multiple tracks?

I have a single-file recording of a vinyl record (containing multiple sequential tracks) that I want to export to multiple separate tracks. Is it possible to take thisfile of audio, add markers to it and export that file from multitrack view into separate tracks? I know its possible to do it using markers and to export a CD list and the burning to CD, but can you export to multiple gapless WAV files instead, with the markers as track/split points?
I am not burning to CD, just wanting to keep the tracks as files.

Once you have added your markers and merged as for making a CD you can then use the Batch Process Marker Regions (next icon along from the Merge icon in Marker list) to save out the marked regions as individual files.

How to make a single recording into multiple songs garageband

I recorded my band's gig the other night using my Zoom H2 recorder. I want to take the single 1.5 hour recording (12songs) and make it into a CD with 12 individual tracks. I would like to use garageband so i can edit out the deadtime between songs but I don't know how to make a CD.

johndmalone wrote:
I want to take the single 1.5 hour recording (12songs) and make it into a CD with 12 individual tracks
http://www.bulletsandbones.com/GB/GBFAQ.html#chaptertocdtracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

How do I split a long video into many short ones automatically

I want to split a 3.5 minute video into 210 small clips automatically. I certainly don't want to do that manually. is there a way to do this?

yunabesaid
The Scene Detect in the media area is gone by Premiere Elements 9.0/9.0.1. But, you can right click the video's thumbnail in Organize/Media, select Run AutoAnalyzer which claims to be "detecting scenes". The latter is worth a try to see what it will do with your 3.5 min clip and its scenes.
Regarding the quality of your videos in Premiere Elements 9.0/9.0.1 editing and export, we would need lots more information on that
a. properties of the source media (video and audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio).
b. what project preset you are setting for the project so that the project preset matches the properties of the source media
c. types of edits
d. choice of export and export settings, customized or default settings used
e. computer or TV DVD or Blu-ray player.
Please review, supply the requested information, and then we will plan troubleshooting strategy. Also, we would need some idea of your computer environment - Windows or Mac 32 or 64 bit version...
Lots ot put together.
Looking forward to your follow up.
Thank you.
ATR

How can I Split the PDF File into different pages?

Hi,
My requirment is to split the pdf file , which is obtained by using FM "convert_otf" , into seperate PDF file for each employee data(PERNR).
Please suggest me the way to slipt the PDF file that has to be downloaded into the presentation server.

Hi,
Ok, looking at that programm didn't actually help me very much to understand what's going on, or where you have the CONVERT_OTF call... Regardless, if the suggestion by Raymond is not feasible in your scenario, the thing I'd try to do is - splitting the spool (OTF) contents before calling CONVERT_OTF into individual documents (feeding it to convert FM piecemeal)... The link to OTF format and commands documentation is here.
Again, it's difficult to give a good algorithm without knowing the exact OTF contents (could you perhaps somehow export the display of spool in RAW format and attach here?) but it would boil down to approximately following:
1) set the &first_page per PERNR = 1;
2) run through OTF lines until the &end_page for PERNR has been identified somehow (hopefully there are Begin/End Form OTF commands '//' in that spool... and they correspond to the split of spool you need...);
3) extract the otf contents from &first_page to the EP command of &end_page into separate OTF itab and, if necessary, add // (End of form) command at the end of itab;
4) call CONVERT_OTF on the table and download;
5) set the &first_page per PERNR = &end page + 1;
6) repeat from 2) until end of spool OTF data
Something like that... Depending how the Sapscript translates into OTF, you may also need to prepend a few commands found at the very beginning of the spool to each extracted invividual OTF document...
I Hope you can get the gist of what I'm suggesting... splitting OTF is definetly easier than trying to split PDF, I feel. It's not ideal solution, because - what if the structure of OTF contents you would be realying on changes for some reason..?
cheers
Janis

Splitting the single record into multiple:One-to-Many;S'ingLikeRESULT_TABLE

Hello Friends,
        I am an ABAPer and new to BW. we have a requirement as follows.
BW is getting data from R/3 system. all the purchasing, sales data and billin data.
at the BW end for each Material document we get multiple ITEMS. ( items will be retrieved at BW end)
the question is how to get the multiple entries in the result.
Each material will have one or more items. so we want to write a separate record for each item. Can we do it using RESULT_TABLE?
I have no idea how the data process at BW end.
I have been trying to find the info in SDN but could get what exactly they are saying. bit confused with key figures and so.
Can anyone of you give some idea on how to get this done please ?
Thanks a lot for your help..
Regards,
reddy
Edited by: SAP User on May 19, 2008 4:27 PM

Ramesh,
   Thank you for the resp.
    Could you please tell me which table actually holds the data that is coming from R3 system?
at the moment I am trying to get the item data from a select statement for a particular master data (which is coming from COMM structure). then i am updatting the return table. but only the last value is getting updated in the final output.
Could you please give me some idea on how to do this? Thanks
Regards,
Sree

Split data and insert into different rows

I have a string like 'sfdsf,sfdsf,sfsd,qweqeqw,iuoi,"
I have created a single column table
I have to extract data from first untill comma(,) occurs and insert into the table like the following
sfdsdf
sfdsf
sfsd
qweqeqw
iuoi
Please help me how to do it

Or a Single SQL query
SELECT trim(',' from DECODE(ROWNUM,1,SUBSTR(STR,1,INSTR(STR,',',1)),
                                    LENGTH(STR)-LENGTH(REPLACE(STR,','))+1,SUBSTR(STR,INSTR(STR,',',-1,1)),
                                     SUBSTR(STR,INSTR(STR,',',1,ROWNUM-1), INSTR(STR,',',1,ROWNUM)-INSTR(STR,',',1,ROWNUM-1))
                               )) STR1
                 FROM (SELECT 'sfdsf,sfdsf,sfsd,qweqeqw,iuoi' STR FROM DUAL),ALL_TABLES
                 WHERE ROWNUM <= LENGTH(STR)-LENGTH(REPLACE(STR,','))+1
                  ORDER BY ROWNUM

ALV GRID report( displayin one record into different rows)

Dear ABAPERS,
i have a request in ALV report. The requirement like
EX: i have a 10 fields in internal table, i want display 5 fields in one row , 3 fields in one row and 2 fields in 3rd row. pleaz suggest the solution.
thanks and regards,
JP Reddy.

JP,
Below thread might help you for your requirement
ALV grid Multiple Header ... ?
Thanks,
Chandra

How do I record narration into different tracks for different subjects??

I'm doing a narration on various items, and need to record it on a CD, broken down into different 'songs' so folks can skip around and find what they need. I already have the narration recorded as one long hour plus recording. Can it be broken up?

You can use the cycle region to mark each "song" - if the Cycle region is active, only the section marked by the cycle region will be shared to iTunes. This way you can export each section separately to iTunes as a different song. In iTunes use the Info panel to assign different track numbers to each section and burn the album to a CD.
In GarageBand '11 it would look like this - sorry, I don't have GarageBand '09 any more:

Splitting a long recording into different songs?

Similar Messages

Maybe you are looking for