Splitting front and back end servers across time zones

Weblogic Server 7.0
EJB is in Memphis,
jsp/servlets/web command classes are in Colorado
sending a date to the DB (in Memphis) results in a date getting changed by about 13 hours.
The change happens between the web command class in Colorado and the EJB command class in Memphis.
Any ideas as to what might be causing this and how to eliminate this bug would be very much appreciated.
Thanks.

Solution was that someone had configured the WLS to always operate dates in GMT, therefore the time differences between time zones were blown out of proportion...

Similar Messages

How to do Audio/Vedio streaming between web cams and back end servers?

I want to implement an internet chat application, I mean, I want a front end, which connects a web cam (mic and speaker). So, I can send videos and audios to a back end server (do flash streaming? but I am not sure what good product out there I can use), and also send both A/V to another computer on the internet. In other words, need a front end that sends local a/v from webcam (&mic) to backend and receives remote a/v from backend to webcam (and speaker) + backend streaming server.
Any suggestions of techniques to be used? What back end flash streaming server should I sue? How to acquire A/V from web cam (& mic) and how to send A/V to web cam (&speaker) to play?
Thanks a lot!

Front end development:- You can use Flash CS4/CS5 or Flex Builder.
Back-end Programming - Server-side programming is basically done using ActionScript. You can use Flash CS4 , but there is no need for special authoring tool, you can do with even text-editor. After you author, you just need to place files at proper location on FMS.
Front-end runtime - You just need Flash Player installed , basically active-x or plug-in in your browser - which you would already have by now
Also if you decide to write AIR application for your front-end, you will need AIR - which is again free
Hope that answers your questions

Authentication with UME separation of front end and back end

My webdynpro project has 2 application. One for Admin one for Rating.
Is it possible to create a java class at Webdynpro level and share it between the 2 applications?
Why the need?
Created a custom class (lets called it CommonEJB), to point to the right pages and set of UI controls after the initial login with UME. This class utilizes the IWDClientUser.getSAPUset() method to get IUser object.
If it is not possible to create a java class at Webdynpro, then this ejb will need to be deployed to the backend.
Putting it at the backend is not good as security wise, its always better to separate the authentication between front and back end.
Any ideas/solutions?
thanks

s0003358504
au-?Krup
LDAP
==============================================
Computer Associates Int'l [eTrust Directory]
Critical Path [CP Directory Server (CP DS)]
Microsoft [Windows 2000 Active Directory Server]
Microsoft [Windows 2003 Server - Active Directory]
Netscape Communications [Netscape Directory Server]
Novell [DirXML Driver for User Management]
Novell [Novell DirXML Driver for SAP HR/PA]
Novell [Novell eDirectory]
Oracle Deutschland [Oracle Internet Directory (OID)]
Siemens [DirX Directory Server]
Siemens [DirX Extranet Edition]
Sun Microsystems [Sun Java System Directory Server]
     Test Objectives
     Testing Scope
     Test Approach
     Test Environment
     Test Data
     Entry / Exit Criteria
     Risks
     Schedule and Resources
     SIT Deliverables
     Test Planning Source Documents
Well, i wish to create a java class that can separate the view areas depending on their login.
lets say you're a manager, u can see certain views. and if you're a supervisor u see another. This is achieved using the java class with information from getSAPUser() position. After retrieving the position, using the java class will programmatically assigned the appropriate views, buttons, tabs etc.
so this class need to in front end, and not back end. problem is we have 2 application.
if the class is created front end in one application can it be shared with another.

Front end and Back end experience in SAP BW

Hi Friends...
Can ne1 plz explain wht things in SAP BW come under Front end and Back end experience......Thanks in advance

Generally, back-end would consist of the taks associated with configuration of data targets (ODS, Cubes), working with extractors, mapping data to the data targets, writing transfer/start rtn/update rules, and creating Infopkgs/ Process Chains.
Front-end deals with the use of the BW - writing queries, workbooks, web (although I think some of the infrastructure aspects of web reporting. e.g. javascript/templates might really could be considered backend). Think of Front-end as all of the client/customer/user facing components.

How do I print front and back with two pages per sheet? (OSX Lion)

I can't find a simple solution to my situation...
I'm using Max OSX Lion 10.7.3 and Adobe Reader X 10.1.2.
I want print two PDF pages onto one printed sheet, and I want to print front and back. When I go to the print settings and select two pages per printed sheet, the sample window shows me what I'm looking for. But when I tell it to print odd only or even only, it changes the print selection. Here's what happens...
Let's say I have a PDF document that is 20 pages long. When I tell it to print two PDF pages per sheet, it shows me that the first pages printed will be PDF pages 1 and 2. When I tell it that I want it to print odd pages only, it tells me that the first printed page will contain PDF pages 1 and 3.
In other words, Adobe Reader wants to print the odd PDF pages instead of the odd pages of the printed document (PDF pages 1 and 2, then 5 and 6, then 9 and 10, so on).
So that I'm being clear...
This [ ] is a printed page. The numbers inside the brackets represent the page numbers in the PDF document...
What I want to print is this...
FRONT   || BACK
[1,2]    || [3,4]
[5,6]    || [7,8]
[9,10]   || [11,12]
[13,14] || [15,16]
[17,18] || [19,20]
What would end up printing is this...
FRONT   || BACK
[1,3]    || [2,4]
[5,7]    || [6,8]
[9,11]   || [10,12]
[13,15] || [14,16]
[17,19] || [18,20]
Aside from telling it exactly which PDF page numbers to print (this would be a taxing job because I'm working with a 273 page document), is there an easy and simple way to print how I'd like?

I would suggest to use Adobe Ilustrator. Also I get an error message when I try tp access the sample document.
You can download Illustrator using Adobe Creative download - http://www.adobe.com/products/illustrator.html
~Deepak

Front and back inside covers?

I just submitted my first book to be printed. I am concerned that the pages will not come out correctly, in as far as odd-even. In the iphoto book, the system automatically puts an inside cover at the beginning and at the end allowing those pages to print double sided for the front and back cover. However, when the pdf file is generated and viewed, no blank pages are created for this purpose. When the book gets printed, does the Apple printer allow for this? Will my odd pages start as odd or come out even as they did in the pdf file?

RG:
As I recall (all of my books were given away as gifts so I don't have them handy for reference) the odd pages did come out on the right with the even on the left as they should be.

HP Laserjet 4P has a 1" toner stain that runs down the left side of page.(front and back)

Hello all,
This is my first post here and I hope someone can help me.
We have a HP Laserjet 4P that we have used for a few years and recently have had a problem of a 1" toner stain that runs down the left side of the printed page(both front and back side). I have replaced the cartride and cleaned everything I know to clean. When I remove the cartridge, there is a little pile of toner on the left side just in front of the horizontal silver bar that is behind the roller. I have cleaned it up several times. Each time I try to print, The toner stain appears on the printed page again and leaves a new pile of toner in the same place.
Does anyone have any experience with this problem? I am not sure if it is a worn part or a maintenance issue.
Thanks in advance for any help.
Fish

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

My front and back camera won't work, and my flash will not either.

I took some picture in the rain, my iPod 5th gen wasn't affected, then my iPod was dropped in a parking lot and found later. Other than that, nothing has really happened to it, but both the front and back camera do not work. When I open up a camera, it's just black. The flash doesn't work either. Can anyone help me?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Unless you purchased the optional AppleCare+ extended warranty,
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price

How to create / design a 2 page brochure (front and back) in photoshop ?

I need to design a 2 page brochure (front and back) in photoshop, how to start ?
I need to create this brochure for high quality printing, so what things I need to make sure ?
Also I need to know how to create it with bleed space or without bleed space ?
Please help
Version: Photoshop CS6 Extended

There is no requiremend for bleed size etc (I just wanna know how to create copy with or without bleed at any time and where to mention the size of bleed). The format is PDF, 300dpi.
I would appreciate if you could answer my above question so that I can start and go in a right direction.

I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

I have the same issue on my iPhone 5s
I've closed the app and re-booted the phone several times but it did not resolve the issue.
Upgrading to iOS 8.0.2 did not resolve it either.
Erasing the iPhone and restoring from a backup did not resolve it.
I'm not sure what else to do.

Setting up SSO between EP and back-end SAP systems

Can anybody give me some insight about setting up SSO between EP and back-end SAP systems. If possible some links to write up would be great.
Thanu

Hi,
This link gives you a detailed information on setting up SSO : http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
Some How-guides:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/77378b3d-0b01-0010-ffa5-c6941e286c43
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
Regards,
Sunil

Role mapping between Portal and Back end systems

I am new to SAP EP.
I just want to know how the mapping between portal and back end system happens.
Scenario : There is a role in ECC system...say FI India. Now there is a request by the FI team that they want to access this role from Portal. In this case, please tell me how the security team will do it. Because I guess, it has to be done by the security team.

Hi,
Usually the role from backend is uploaded to portal then it will be seen as Group and we need to assign our portal roles to this group. Please refer [this|http://help.sap.com/saphelp_nw73/helpdata/en/d6/7859ec80df46738e23ccb4f4c8c502/content.htm].
Regards,
Samir

How to print page in front and back in scripts

hi,
I want to know to know the how to print a page in front and back.

HI Ragavendra
set this
Print mode is D
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
D The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
and other Print mode options are
Print mode
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
' ' Currently active printing mode continues unchanged.
S The page is printed in simplex mode. That is, the printer should print on only one side of the paper. If another mode was previously active, then the printer is switched to simplex mode with the start of the page.
D The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
T The page is printed on the first side of a sheet in tumble duplex mode. That is, the printer prints on both sides. The page on the second side is always inverted, so that the footer of the second page is printed opposite the header of the first page.
If another mode was previously active, then the printer is switched to tumble duplex mode with the start of the page and continues printing in this mode.
Print modes are currently supported for printers that use the PCL-5 language. These are printers that are defined with the following SAP device types: HPLJ_II, HPLJIIID, HPLJ4, LX4039, SNI20XX8.
See the spool system (transaction SPAD) to check on how your printers are defined.
The print controls for these functions are SPMSI (begin simplex printing); SPMDU (begin duplex printing); SPMTU (begin tumble duplex printing); SPMFS (print on first side of sheet in duplex or tumble duplex mode); and SPMBS (print on second side of sheet in duplex or tumble duplex mode).
Regards Rk

I have an iphone 4 . A new screen has been fitted front and back. It suffered a bit of a bang. Now when the phone is turned on the apple logo appears but nothing more . Could there be a problem elsewhere ? Other than smashed screen? Any ideas welcome

I have an iphone 4 . It's had a new front and back screen fitted after a bit of a bang . Now when turned on the apple logo appears on the screen and then goes off. Then appears again etc etc etc .
It won't go any further . Any ideas as to what else may be an issue or has anyone else had the same problem and what was the outcome . If I back up to iTunes will I be able to back up my information without any activity showing on the screen !! I'm lost without all my information . I haven't backed up to iCloud for at least 5 months. Can anyone help me PLEASE?????

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

I am Using Iphone 3GS, Is it possible to change the complete front and back panels?

I am Using I Phone 3GS model I got lot of scraches over the body of the phone. Is it possible to replace teh complete panel with new one??

If you Google "iPhone 3gs parts" you will be able to find vendors that sell front and back panels. So, I would say it is possible to replace the front and back panels. I wouldn't recommend doing it yourself unless you are experienced in this type of work.

Splitting front and back end servers across time zones

Similar Messages

Maybe you are looking for