Splitting the Pdf file
Hi,
How to split the pdf file as chapter?. (or) splitting the pdf file as pages?
Is any packages in java?.
can u please tell me.
Thanks,
nithi
http://www.lowagie.com/iText/
Similar Messages
-
How can I Split the PDF File into different pages?
Hi,
My requirment is to split the pdf file , which is obtained by using FM "convert_otf" , into seperate PDF file for each employee data(PERNR).
Please suggest me the way to slipt the PDF file that has to be downloaded into the presentation server.Hi,
Ok, looking at that programm didn't actually help me very much to understand what's going on, or where you have the CONVERT_OTF call... Regardless, if the suggestion by Raymond is not feasible in your scenario, the thing I'd try to do is - splitting the spool (OTF) contents before calling CONVERT_OTF into individual documents (feeding it to convert FM piecemeal)... The link to OTF format and commands documentation is here.
Again, it's difficult to give a good algorithm without knowing the exact OTF contents (could you perhaps somehow export the display of spool in RAW format and attach here?) but it would boil down to approximately following:
1) set the &first_page per PERNR = 1;
2) run through OTF lines until the &end_page for PERNR has been identified somehow (hopefully there are Begin/End Form OTF commands '//' in that spool... and they correspond to the split of spool you need...);
3) extract the otf contents from &first_page to the EP command of &end_page into separate OTF itab and, if necessary, add // (End of form) command at the end of itab;
4) call CONVERT_OTF on the table and download;
5) set the &first_page per PERNR = &end page + 1;
6) repeat from 2) until end of spool OTF data
Something like that... Depending how the Sapscript translates into OTF, you may also need to prepend a few commands found at the very beginning of the spool to each extracted invividual OTF document...
I Hope you can get the gist of what I'm suggesting... splitting OTF is definetly easier than trying to split PDF, I feel. It's not ideal solution, because - what if the structure of OTF contents you would be realying on changes for some reason..?
cheers
Janis -
How do I split a pdf file when the file size is too large?
How do I split a pdf file when the file size is too large? Thanks!
With Adobe Acrobat. It can also optimize your document to make the size smaller.
-
InsertPage RaiseError: An incorrect structure was found in the PDF file
Hi,
I am trying to build a button script that will create a new document, copy (insert) from the first page of the open document, save it, then close it. I believe the part where it gets tricky -- and possibly not doable -- is that the original (source) document uses a template; full of form fields to possibly be spawned off as new pages.
Given the above, ideally the user of the form can click on the "save new page" button: it creates anj Inserted copy of the first form page, cleared of content if any has been entered, and not including any other pages that may have been spawned.
With the code I am using, it currently creates the copy of the page and it inserts it as the zeroeth page (ahead of a blank page I intend to add code later to delete) and saves it. However, there are a couple of problems that come up with this. First is the error code that opens in the debugger:
RaiseError: An incorrect structure was found in the PDF file
Doc.insertPages:29:AcroForm:Save New Form:Annot1:MouseUp:Action1
===> An incorrect structure was found in the PDF file
Despite the error it does still save the page (form copy) as mentioned above. However, if you try to start working with it, it lets you know that there are no form fields on the document (even though they are all there and seemingly functional). When I look to edit the fields, it will then ask you if you want to try to recognize the fields. If I click on "yes", it says it was unable to, but then the form opens up with all of the field names perfectly matching the original. If I click on "no" it just opens the page with all of the fields perfectly matching again. So I feel like I am close to being able to do this!
I am using the following code to produce my results:
(In the JavaScript "app" folder, I have the following trusted functions:)
myTrustedMenu = app.trustedFunction(function(name)
app.beginPriv();
app.execMenuItem(name);
app.endPriv();
myTrustedSaveAs = app.trustedFunction(function(doc, namePath)
app.beginPriv();
doc.saveAs(namePath);
app.endPriv();
myTrustedNewDoc = app.trustedFunction(function()
app.beginPriv();
var doc = app.newDoc();
app.endPriv();
return doc;
myTrustedInsertPage = app.trustedFunction(function(doc, namePath)
app.beginPriv();
doc.insertPages ({
nPage: -1,
cPath: namePath,
nStart: 0
app.endPriv();
(On the "Save New Form" button, the following code is activated:)
// First split document path into an array
var aPathComps = this.path.split("/");
// Get File Name off end of array
var myFileName = aPathComps.pop();
var pathway = aPathComps.join("/");
var myDoc = myTrustedNewDoc();
myTrustedSaveAs(myDoc, pathway + "/test.pdf");
myTrustedInsertPage(myDoc, this.path);
//myDoc.resetForm();
//myDoc.closeDoc(true);
I apologize for the long post and I appreciate anyone who takes the time to look into this issue for me.
Thanks,
MikeMikeIs2C wrote:
You nailed it TSN! Deleting the tags did the trick. Thank you so much for your help! Just an FYI for any of you fellow "noobs" that might be referencing this discussion, to open the "Tabs" view (in Adobe Acrobat Pro XI in my case) go to View > Show/Hide > Navigation Panels > Tags. I looked all over the place for that until I found a document that mentioned how to open it.
Thanks for pointing out specifically how to get here. Thanks to the all for this post!
I also encountered this error, "An incorrect structure was found in the PDF file" from my published MadCap Flare user guide. I am attempting to find a way to build a bridge between Flare and Google documents for corporate-wide collaboration. Thus far, it's a crazy challenge finding a way to produce gdocs from Flare output. Neither product makes this easy. The closest I can get is by publishing the Flare doc as a PDF... but then I must break that document down into 2mb chucks...which led me to this problem, after attempting to use the Adobe Acrobat splitting tool.
Question:
What is the root cause of these bad tags. There are a LOT of them! Is this a fault in the way MadCap Flare creates a PDF document?
Yes, deleting some of the tags will allow me to finally split a PDF document. Unfortunately, this error occurs in all my published PDF documents, thus preventing me from automating (scripting) this split and then conversion to Google Docs!
Thank you -
How to break the PDF file into images?
How to break the PDF file into images? There should be settings in Photoshop CS 6 that imports PDF file and break it into images. I have a short instruction:
2. Open the file in Photoshop.
3. A new window should open to Import PDF. Click on images, not pages import pdf into Photoshop.doc
4. Select all the files shown (shift + click), Click O.K. Four files should open on your screen.
Was anybody successful with that?Whether this is available solely depends on the structure of the PDF and whether it actually contains whole images that can be extracted separately. Depending on whatgoing on in the PDF this may simply not be the case and the images have been tiled and split up in multiple "objects" whose appearance can only be retained by rasrerizing the whole page...
Mylenium -
How can I split a pdf file into smaller files using Acrobat XI
How can I split a pdf file into smaller files using Acrobat XI?
Hi laforcej
Open the PDF In Acrobat ...
Go to Tools -> Pages -> Extract
Now Select the Page Number you Want to Extract and Save them -
i have not found a way to rename the pdf files I have downloaded. In other apps it is easy to do so, but iBooks does allow just change the files and not other editing. Do you find this important?
What are the names directly after splitting?
1.pdf 2.pdf 3.pdf.....they are names as in sequence but practically there are not in sequence they are just vertically split
how do you get 56 files out of 56 pages if each file has 2 pages?
i got 56 files after splitting vertically. each side will be splitted into separate files
what is the naming convention the splitted files should be renamed to?
any name but the sequence should be proper. if it says 1.pdf then it should point to 1st side
And what does this all have to do with Java?
need to know the programming logic on how we can do it in java. -
I have Windows 98 and need Acrobat to open up the pdf files for 5.0
I have the old system, Windows 98 and presently have the free Adobe 5.0 version on my Compaq Presario Computer, and it is a 5242 model desktop.
I have inadvertanly switched over to Compaq Carbon Copy 32 Version 5.0 but since, have uninstalled it and now, on each of what was the pdf files initially of which I have, of which is at least 16 or more, on each of those files, an error message comes up and says "PROGRAM NOT FOUND," and states the following: "Windows cannot find CCW32EXE. This program is needed for opening the pdf files." And then it has a dialogue box with the computer operational symbol in it as C:\ and then it wants me to locate it. I cannot locate it through the "auto" because, this sytem being so old, doesn't have a magnifying glass or a "search" tool to do this in the "My Computer Icon on the Desktop as the Compaq people wanted me to do. I would have to do this manually. I have already talked to the Compaq people on their chat line and because of this, they said they couldn't help me with this problem and referred me over to you.
I've tried to find a download for 5.0, though I really don't think I need one since it is currently installed. I believe the proper way to fix this is to just convert the CCW32EXE over to the Acrobat pdf files and have those files opened and should open up all of my 15 or so files altogether at the same time because they all converted over to something else at the same time prior.
Are you able to help me?
But I believe to alleviate this problem, if you could just give me the information to be able to open up the pdf files to 5.0 and find out what download I may pursue, it might be able to correct this problem. I already have the 5.0 Acrobat installed, however.Hi Aandi,
I have followed your directions and I have the old system of Windows 98, so I had to go to "programs" and come up to Acrobat 5.0 and once in there, all of the Window there is greyed out, although I can still go to the tool bars above in it. I went to "file" and went to "open" and from there, I received an "open" window with a dialogue box in it and in that dialogue box as I scrolled down, it wants me to put in there, one of the following, "desktop," "my documents," "3 1/2 floppy [A:]," "[C:]," "system _save [D:]," ""[E:," "[F:]," ete; of these which do I pick in the "open" dialogue box? and down at the bottom, is the FILE NAME and what do I put in there? Just below that, it has the FILES OF TYPE which has there Adobe pdf Files, in it's dialogue box. I hit these, but I still get an error message of which basically says, "NOT FOUND, please put in proper file name given." And I don't know actually where it is given.
So, as you see, I am a novice in all of this and you can contact me at my e mail address which is [email protected]
and should a reply be needed, I'll come back to the forum for a reply.
I really need to open up the Adobe 5.0 pdf files. All of the pdf files, simultaneously went over to Compaq Carbon Copy 32 of which I since, uninstalled. But I really need to get back and open the Adobe 5.0 pdf files.
And I want to thank you for your support and eagerly awaiting your help.
Thanks,
Now, I did do one of the following: I went to C: which came to Acobat 3 and I hit that which came to Reader and I hit that which came to the following: ACROBAT which gave me ACTIVE X - BROWSER - FONTS - HELP - OPTIONAL - PLUG-INS -
While converting spool to PDF, no data is coming in the PDF file.
Hi All,
I am submitting a z program ZPR022_INNCOMETAX_REPORT_COPY1 (which has some output display) from Z_ITSLIP_MAIL. I am creating a job, submitting the above program via JOB to SAP-SPOOL.
In program ZPR022_INNCOMETAX_REPORT_COPY1 , I am getting the run time job information and from there I am getting the spool id. Now I am converting the spool id to a PDF. This PDF should contain the output of the program ZPR022_INNCOMETAX_REPORT_COPY1. This output is normal output using Write statement only. But once the program is executed, I could find no data in the PDF file. When I check in SM37 and SP02, both the JOB and the SPOOL are created. What I feel is the program is not picking the spool id at the run time. Could any one help me in this regard how to proceed.
Please find the code below.
Program 1.
LOOP AT pernr.
CLEAR p_job.
p_stim = p_stim + 120.
CONCATENATE'ITSlip' pernr-low p_job sy-datum INTO p_job SEPARATED BY
space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = p_job
sdlstrtdt = p_sdat
sdlstrttm = p_stim
IMPORTING
jobcount = l_jobcount.
SUBMIT ZPR022_INNCOMETAX_REPORT_COPY1
WITH pnptimr6 = 'X'
WITH pnpbegda = period-low
WITH pnpendda = period-high
WITH pnppernr-low = pernr-low
WITH pnpabkrs-low = 'IN'
VIA JOB p_job
NUMBER l_jobcount
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS ls_params
WITH immediately = 'X'
KEEP IN SPOOL = 'X'
AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_jobcount
jobname = p_job
strtimmed = 'X'
PRDMINS = 2.
sdlstrtdt = p_sdat
sdlstrttm = p_stim.
ENDLOOP.
Program 2.
IF sy-batch EQ 'X'.
LOOP AT pnppernr.
SELECT SINGLE * FROM pa0105
WHERE pernr EQ pnppernr-low
AND subty EQ '0010'
AND endda EQ '99991231'.
p_email1 = pa0105-usrid_long..
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
IF sy-sysid = c_dev.
WAIT UP TO 5 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ENDLOOP.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool'
'request to be created.'.
EXPORT gd_spool_nr TO MEMORY ID 'SPOOLTOPDF'.
ENDIF.
ENDFORM. " SEND_MAIL
*& Form get_job_details
text
--> p1 text
<-- p2 text
FORM get_job_details .
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM. " get_job_details
*& Form obtain_spool_id
text
--> p1 text
<-- p2 text
FORM obtain_spool_id .
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
MESSAGE s004(zdd) WITH gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM. " obtain_spool_id
*& Form convert_spool_to_pdf
text
--> p1 text
<-- p2 text
FORM convert_spool_to_pdf .
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " convert_spool_to_pdf
*& Form process_email
text
--> p1 text
<-- p2 text
FORM process_email .
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
ENDFORM. "process_email
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'IT Declaration'.
CONCATENATE 'ITSLIP' ' ' INTO gd_attachment_name.
it_mess_bod = 'IT FORM for this month'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
TABLES it_mess_bod
it_mess_att
USING p_email1
'MindTree Payroll team'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
CHANGING gd_error
gd_reciever.
ENDFORM. " process_email
*& Form send_file_as_email_attachment
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_4422 text
-->P_4423 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM send_file_as_email_attachment TABLES it_message
it_attach
USING p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
CHANGING p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. "send_file_as_email_attachment
Points will be rewarded.
Regards,
BalajiHi,
I think you are retrieving the spool before the entire spool is generated.
Put the following logic to retrieve spool iD
CHECK WHETHER STATUS OF JOB IS COMPLETED OR CANCELLED
WHILE 1 = 1.
GET THE JOB STEPLIST WHICH HAS THE SPOOL NUMBER
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '35'
JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
CHANGING
RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
BEGIN OF INSERTION U179942 E1BK928781
IF STATUS OF JOB IS COMPLETED(F) OR CANCELLED(A)
READ THE JOBSTEPLIST & GET THE SPOOL NUMBER
IF wa_jobhead-status = c_a OR wa_jobhead-status = c_f.
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
w_spool_number = wa_jobsteplist-listident.
EXIT.
ENDIF.
ENDWHILE.
Best regards,
Prashant -
Doesn't open the PDF file (i.e. articles, books pages). It appears a black page. Thanks for help
Safari doesn't open the PDF file (articles, book page, etc). It appears a black page. Before that it was working perfectly. Thank for your help
Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin (or anything Adobe related) in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file. -
How to read the and Write the PDF file give me the solution
Hi all,
How to read the and Write the PDF file give me the solution
My coding is
import java.io.File;
import com.asprise.util.pdf.PDFImageWriter;
import com.asprise.util.pdf.PDFReader;
import java.io.*;
import java.io.FileOutputStream;
public class example {
// public example() {
public static void main(String a[])
try
PDFReader reader = new PDFReader(new File("C:\\AsprisePDF-DevGuide.pdf"));
reader.open(); // open the file.
int pages = reader.getNumberOfPages();
for(int i=0; i < pages; i++) {
String text = reader.extractTextFromPage(i);
System.out.println("Page " + i + ": " + text);
// perform other operations on pages.
PDFImageWriter writer = new PDFImageWriter(new FileOutputStream("c:\\new11.pdf"));
writer.open();
writer.addImage("C:\\sam.doc");
writer.close();
System.out.println("DONE.");
reader.close();
catch(Exception e){System.out.println("error:"+e);
e.printStackTrace();
I get the pdf content then it returns the string value but ther is no option to write the string to PDF, and we only add a image file to PDF,but i want to know how to wrote the string value to PDF file,
Please give response immtly
i am waiting for your reply.
thanks,
Suresh.GI have some question flow
How library to use this code.
I try runing but have not libary.
Please send me it'library
Thank you very much! -
I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections
You should be able to just place them in your Books library in iTunes and check to ensure that your Book library is configured to sync to your iPod when you sync your iPod to iTunes.
-
How can I move a pdf file from my pc to my ipad without overwriting all the pdf files in my ipad?
How can I move a single pdf file from my pc to my ipad without overwriting all the pdf files already in my ipad?
Email PDF to iPad.
-
Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?
What do I need to do to bring the graphics and exhibits from the PDF file to the Word file?Hi jackp52432917,
How was that PDF file created? Please see Will Adobe ExportPDF convert both text and form... | Adobe Community
It could be that the PDF file you're converting was created using a third-party application, and it doesn't contain all the information necessary to ensure a clean conversion. Have you had similar troubles converting other PDF files?
Best,
Sara -
Error opening the PDF file while sending the PDF as an attachment
Hi All,
I am sending a PDF as an attachment in the mail. I am using the code pasted on 'Jul 28, 2006 8:59 AM' subject OTF Format of Purchase Order in email unreadable.
My problem is when I open the attachment in SOST or in the mail, I get the error message "Adobe could not open *.PDF because it is either not a supported file type or because the file type has been corrupted."
Please let me know if anybody has faced such an issue.
The code is found below.
FORM MAIL_OBJECT *
This routine receives OTF data. OTF data is converted to PDF
format and send to the Partner's email address
FORM mail_object TABLES otf_data STRUCTURE itcoo .
DATA: pdf_size TYPE i, " PDF Size
pdf_itab_size TYPE i, " Attachment size
mailtxt_size TYPE i, " Text in mail size
l_vbeln LIKE vbdka-vbeln. " Order Doc
DATA:
it_mailtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE, " Mail Text
it_pdf TYPE TABLE OF tline WITH HEADER LINE, " OTF output
it_mailpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE, " Dist details
it_mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE," Header data
it_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE, " Rec List
it_pdfdata LIKE solix OCCURS 0 WITH HEADER LINE. " Attachment data
DATA: it_doc_att LIKE sodocchgi1. " Attri of new doc
DATA: BEGIN OF it_pdfout OCCURS 0, " PDF in 255 length
tline TYPE char255,
END OF it_pdfout.
Sales doc and Customer
DATA: BEGIN OF i_vbeln OCCURS 0,
vbeln LIKE vbpa-vbeln, " Sales Document
adrnr LIKE vbpa-adrnr, " Customer
END OF i_vbeln.
Sender Address no and SMTP address
DATA: BEGIN OF i_addrs OCCURS 0,
addrnumber LIKE adr6-smtp_addr,
smtp_addr LIKE adr6-smtp_addr,
END OF i_addrs.
Convert OTF to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = pdf_size
TABLES
otf = otf_data
lines = it_pdf.
Make each line 255 characters
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
TABLES
content_in = it_pdf
content_out = it_pdfout.
Create the PDF File
CLEAR it_pdfdata.
REFRESH it_pdfdata.
it_pdfdata[] = it_pdfout[].
LOOP AT it_pdfout.
MOVE it_pdfout-tline TO it_pdfdata-line.
APPEND it_pdfdata.
CLEAR it_pdfdata.
ENDLOOP.
DESCRIBE TABLE it_pdfdata LINES pdf_itab_size.
Text in the mail.
it_mailtxt-line = 'ORDER ACKNOWLEDGEMENT'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--1'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--2' &
' This is a test mail, Line Number--2'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--3' &
' This is a test mail, Line Number--3' &
' This is a test mail, Line Number--3'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--4' &
' This is a test mail, Line Number--4' &
' This is a test mail, Line Number--4' &
' This is a test mail, Line Number--4'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--5' &
' This is a test mail, Line Number--5' &
' This is a test mail, Line Number--5' &
' This is a test mail, Line Number--5' &
' This is a test mail, Line Number--5'.
APPEND it_mailtxt.
DESCRIBE TABLE it_mailtxt LINES mailtxt_size.
Document Number for Output
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = vbdka-vbeln
IMPORTING
output = l_vbeln.
Attributes of new doc
CONCATENATE 'Order' space 'Acknowledgement' space l_vbeln
INTO it_doc_att-obj_descr SEPARATED BY space.
it_doc_att-sensitivty = 'F'.
it_doc_att-doc_size = mailtxt_size * 255.
Create Pack to text in mail body.
CLEAR it_mailpack-transf_bin.
it_mailpack-head_start = 1.
it_mailpack-head_num = 0.
it_mailpack-body_start = 1.
it_mailpack-body_num = mailtxt_size.
it_mailpack-doc_type = 'RAW'.
APPEND it_mailpack.
Create Pack to PDF Attach.
it_mailpack-transf_bin = 'X'.
it_mailpack-head_start = 1.
it_mailpack-head_num = 1.
it_mailpack-body_start = 1.
it_mailpack-body_num = pdf_itab_size.
it_mailpack-doc_type = 'PDF'.
CONCATENATE l_vbeln '.pdf' INTO it_mailpack-obj_name.
CONCATENATE 'Order Ack' space l_vbeln INTO it_mailpack-obj_descr.
it_mailpack-doc_size = pdf_itab_size * 255.
APPEND it_mailpack.
*Get email addresses based on Sales document.
SELECT vbeln adrnr INTO TABLE i_vbeln
FROM vbpa
WHERE vbeln = vbdka-vbeln AND
parvw = nast-parvw.
IF NOT i_vbeln[] IS INITIAL.
SELECT addrnumber smtp_addr INTO TABLE i_addrs
FROM adr6 FOR ALL ENTRIES IN i_vbeln
WHERE addrnumber = i_vbeln-adrnr AND
smtp_addr NE space.
ENDIF.
IF i_addrs[] IS NOT INITIAL.
LOOP AT i_addrs.
it_reclist-receiver = i_addrs-smtp_addr.
it_reclist-express = 'X'.
it_reclist-rec_type = 'U'.
it_reclist-notif_del = 'X'. " request delivery notification
it_reclist-notif_ndel = 'X'. " request not delivered notification
APPEND it_reclist.
CLEAR: i_addrs.
ENDLOOP.
ENDIF.
Call FM to send email
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = it_doc_att
put_in_outbox = 'X'
TABLES
packing_list = it_mailpack
object_header = it_mailhead
contents_txt = it_mailtxt
contents_hex = it_pdfdata
receivers = it_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorizationfiltered= 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " MAIL_OBJECT
Regards,
AjithHi Ajith !!
Please refer this link :
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Here a spool output is converted into PDF and then sent as an email.
I think instead of using FM to change the width, try the logic mentioned in the link.
Also instead of FM CONVERT_TO_OTF use :
1. CONVERT_OTFSPOOLJOB_2_PDF
I hope this should solve the problem.
I had referred the same program from the link and it worked absolutely fine. Also check the adobe acrobat version, i guess old version doesnt support SAP, though not very sure.
Best regards,
Prashant
Maybe you are looking for
-
How can I get rid of Findwide Malware?
Every time I launch Google Chrome, a second tab opens for search.findwide.com followed by a lot of other characters. Some research tells me that this is a common malware program and there are plenty of sites that explain how to get rid of it... on a
-
What PORTS to open in the Environment
I want to setup two nodes RAC plus a Physical Standby plus a Logical Standby and a Grid Control server. I need to tell network admins to OPEN ports in firewall so that each servers can talk to other. My question is what are the default ports used by
-
Hi, I have 2 big xml files (aprox. 1MB) and I want to transform file1 into file 2 after generating the xsl file that contains the diffences between them.My question is: should I use xmlDiff.diff() method before xmlDiff.generateXSLFile(name)?I didnt f
-
Photoshop CS5 disables autoplay for digital camera?
I just received and installed Photoshop CS5 Upgrade a couple days ago. Software seems to be working fine. However, I've noticed that when I plug in my DSLR (Canon EOS 5D Mark II), it will not auto-launch any application assigned to it. Typically,
-
Standalone server with ASM & database, oracle HAS service not auto start
WE have a standalone oracle and grid on linux redhat 5. Oracle version is 11gr2, and I noticed everytime server reboot, the d.bin processes are all gone and has services are not automatically rebooted during server reboot. How to handle this issue? T