Standalone server with ASM & database, oracle HAS service not auto start

WE have a standalone oracle and grid on linux redhat 5. Oracle version is 11gr2, and I noticed everytime server reboot, the d.bin processes are all gone and has services are not automatically rebooted during server reboot.
How to handle this issue?
Thanks in advance.

You said:
>
That's not what HAS is for. HAS will restore the services to the state they were if an incident happens that aborts a service. It will not startup your database/ASM when the server reboots. Thats what the famous dbora script is for.
>
Yes it is. Not only will ohasd try to restart failed resources, but it will also (unless disabled) start them in the proper order when the node boots.
I am sorry, but your statement is wrong.
From http://docs.oracle.com/cd/E11882_01/server.112/e25494/restart001.htm#ADMIN12709
>
Oracle Restart improves the availability of your Oracle database. When you install Oracle Restart, various Oracle components can be automatically restarted after a hardware or software failure or whenever your database host computer restarts.
>
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Similar Messages

Restore DB13 Oracle backup of RAC+ASM to Standalone server with ASM only

Dear Experts,
My SAP ECC System is on Oracle 11g with RAC on ASM. I am taking the backup using DB13 with init<SID>.sap profile as attached.
I want to restore this backup on single node System with only ASM(no RAC). (ASM File system structure remains the same)
As per my finding and as per Note 1627541 - BR*Tools support for Oracle ASM and Exadata/ODA, it says use only BRRECOVER to restore the database.
Can anyone please assist me, in restoring the database. As in step by step commands or points to follow the restore.
Thanks,
KK

Hi Yayati,
Please refer to SAP guidelines on the configuration for using brtools on Oracle RAC + ASM
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0063fdad-49f6-2e10-22bc-
c8c4c7f9e055?QuickLink=ora&ov…
Additional configuration information can be checked under SAP note
Note 1598594 - BR*Tools configuration for Oracle inst. under "oracle" user
you need to adapt your init<SID>.sap file according to the recommendations suggested.
Post this you may use brtools to backup and perform restoration as well.
Hope this helps.
Regards,
Deepak Kori

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKS

Hello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

I experience issue with my Verizon iPhone5s cellular service not working on 3G.

I'm experiencing issue with my Verizon iPhone5s cellular service not working on 3G but LTE works great. I tried resetting network setting, new SIM card, reset iPhone to new too. I'm have the latest carrier code of 16.0. Iphone firmware 7.1.2.
I started experiencing this when verizon started advertising XLTE.
It is very frustrating when internet does not work when I'm in 3G area. Phone calls does work though. Signal is good too.
Thank you in advance.

I would agree w you but this only happens on Iphone5S.
Iphone5 works fine. I tested this with other Iphone 5 and 5s.
To test this, go to setting/celluar/turn off "Enable LTE"

Installing Oracle Database with ASM on Oracle VM for SPARC

We're installing Solaris 11 and Oracle VM for SPARC so we can install Oracle Database with ASM. There is a requirement when creating the database that the raw disk have an owner that is the same as the database. Everytime we try to change the owner it will always show that the owner is root.
Any ideas?

Hi
Please let me know from where you are allocating ASM raw disks for the guest domain.
i hope you are changing the disk permissions using chown -R
Also confirm the permission using command # ls -IL /dev/rdsk
Regards
AB

Moving oracle database to a new server with an upgraded oracle software

Hi Guys,
Here is the scenario, we have an existing Oracle 9.2 demo database on a Solaris 5.9 server. I was asked to transfer this to another server with same OS but with an Oracle 10g software installed. The original plan was to mount the exisiting Oracle home from the original server to the new server and from there copy all the database files and bring up the database.
Here are the steps:
- Issue an "alter database backup controlfile to trace", get the script from the trace file
- Copy all database files to the new server
- Edit parameter files
- Do a startup mount recreate the control files, do a recover database, and startup the database on the new server.
I suggested that we to a transport tablespace but due to limited resources and that the 9.2 database does not have this feature we can't perform this process. I also can't do a exp/imp of the database since we really have limited resources on a disk. I was wondering if the steps I enumerated above are correct? Or would result in an error?

Hi,
why you want to recreate the controlfile, does the mount point locations are changing from old server to new server?
if you recreating controlfile new incarnation starts, keep in mind.
you have the downtime to upgrade.. :)
shutdown
take cold backup and move to new server.
create the directory structure as exist in PFILE including CRD files.
install software
startup upgrade
upgrade database(need to add sysaux TBS)
shut immediate
startup
*@?/rdbms/admin/utlrp.sql*
change hostname in listner.ora/tnsnames.ora files.
Thanks

Migrating Non ASM, Non RMAN to New Server with ASM and RMAN - Possible?

We currently have a database ( Oracle 10g R1 ) on a Sun Solaris server that is NOT using ASM or RMAN. The database is about 300GB. We are getting a new server and we want to install Oracle 10g R2 with ASM and RMAN and migrate the database.
I have seen the documentation on migrating non ASM to an ASM server but the methods all use RMAN. Is it possible to migrate to an ASM database without using RMAN? Would datapump import/export work if I created a new database on the new server with all the same tablespaces? Or, do I have to bite the bullet, install RMAN on the old server and do the backup?
Thanks.

If you're not using RMAN that doesn't mean you can't use it to perform a single backup, rman is contained in every oracle RDBMS installation version 10G or higher.
this is only a sample of how to do it
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '<file_system_path>/%U.DBF';
--first we allocate the channel default channel.
RMAN>RUN
ALLOCATE CHANNEL DEFAULTCHANNEL TYPE DISK;
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
BACKUP DATABASE;
SHUTDOWN
}then once you have it, you can do what you want.
It should also be possible to manually restore the database from the original datafiles but it's better to follow the solution involving RMAN.
Bye Alessandro

DR type restore of 10gR1 RAC with ASM database to another cluster

Hi,
We have a requirement to restore the image copy of our production database to another location. The production database is a 10-node 10gR1 RAC deployment with ASM. The image copy is in the FRA.
We want to restore this image copy onto a 2-node 10gR1 RAC cluster, which is also running a development environment. We have so far used the 'backup copy copy of database' command to pipe the image copy from the FRA to an NFS mounted filesystem. We plan to restore (and convert the names) the files from here. I have a list of steps we need to undertake - like adding the production database metadata on the development cluster into CRS, restore the spfile and controlfile, restore and convert the datafiles from the production ASM diskgroup to the development ASM diskgroup.
has anyone out there done this? Are there any nasty 'gotchas' or pitfalls?
Please, tell me your pain so I can spare it myself :o)
regards
Dilbert

user562223 wrote:
We are planning to take cold backup through RMAN. But now the issue is that if something going wrong with the storage then both the diskgroup on the same storage will not be mounted.
What should be the backup & recovery strategy for this scenario? How to bring the server back online?The strategy depends entirely on the risk analysis and assessment. Do you need to be able to recover the database to the moment just before it crashed? Do you need point-in-time recovery? What are the availability requirements? Etc.
Databases can be quite diverse in nature. It can be fairly static with very few changes, to very dynamic to totally dynamic. In some cases, the database only needs to be restored as a "container" (structures with no data) as that is all the processes need and as these will supply the data. In other cases, the entire database with all committed transactions to the second before the crash is needed. In a few cases, you may want to use Data Guard and standby/clone databases instead.
There is no single set of rman instructions that you can copy-and-paste to implement any of these diverse backup and recovery strategies. You need to determine and define your backup, restore and availability requirement first - before looking at which rman commands to use and in what sequence, where and when.

Difference between Domain member and standalone server with AD binding

Hi all,
Can anyone explain the difference between:
A) Setting up a MacOSX server as Windows domain member server using Server Manager;
B) Setting up a MacsOSX server as Windows standalone server and joining the Active Directory using Directory Access;
My setup:
====================
We have a Windows 2003 A.D. running, all users are set up in the A.D.
Also we have two MacOSX servers, which provide file services (both AFP and SMB/CIFS) for Mac and Windows clients, while using the A.D. for user authentication.
One of the MacOSX servers is configured as a domain member server, the other is configured as Windows standalone server. The latter is bound to the A.D. using Directory Access.
Following the Apple manuals one should think that the first setup (domain member) is the best.
As for Open Directory: both servers are running as Standalone.
How my setup behaves
====================
Official Apple guidelines are to set up the Mac server as domain member. Reality is another thing though.
For AFP both servers perform equal: users are authenticated against the A.D. and get access to their shares. File/Folder permissions are as expected.
For Windows clients things aren't the same.
The server setup as Windows Domain member acts strange. Windows clients don't have single signon experience.
Every file/folder's owner shared on this server is <<unknown>> to the client. Also, when a Windows user creates a file/folder the owner is <<unknown>>.
Sometimes the Samba server just stops authentication. A relaunch of the Samba service fixes this.
The server setup as a standalone server performs as expected. Windows clients have single signon experience, there are no issues with file/folder owner. Also authentication never stops.
Several kinds of Mac Mac OS X (10.4.9)

Hi all,
Can anyone explain the difference between:
A) Setting up a MacOSX server as Windows domain member server using Server Manager;
B) Setting up a MacsOSX server as Windows standalone server and joining the Active Directory using Directory Access;
My setup:
====================
We have a Windows 2003 A.D. running, all users are set up in the A.D.
Also we have two MacOSX servers, which provide file services (both AFP and SMB/CIFS) for Mac and Windows clients, while using the A.D. for user authentication.
One of the MacOSX servers is configured as a domain member server, the other is configured as Windows standalone server. The latter is bound to the A.D. using Directory Access.
Following the Apple manuals one should think that the first setup (domain member) is the best.
As for Open Directory: both servers are running as Standalone.
How my setup behaves
====================
Official Apple guidelines are to set up the Mac server as domain member. Reality is another thing though.
For AFP both servers perform equal: users are authenticated against the A.D. and get access to their shares. File/Folder permissions are as expected.
For Windows clients things aren't the same.
The server setup as Windows Domain member acts strange. Windows clients don't have single signon experience.
Every file/folder's owner shared on this server is <<unknown>> to the client. Also, when a Windows user creates a file/folder the owner is <<unknown>>.
Sometimes the Samba server just stops authentication. A relaunch of the Samba service fixes this.
The server setup as a standalone server performs as expected. Windows clients have single signon experience, there are no issues with file/folder owner. Also authentication never stops.
Several kinds of Mac Mac OS X (10.4.9)

SQL Server service not automatically starting (logon failure)

I just installed SQL Server 2012 on a machine. To run "SQL Server" as well as "SQL Server Agent" service I have created a domain account called SQLADMIN. This account is a service account and has no other rights like logon locally or
local administrator.
When the machine restarts, "SQL Server" service doesn't start automatically. When I click Start then it says "Logon Failure". Now if I simply enter the password again under tab "Log On" and then start service then it starts. Why
doesn't it start automatically?

Hello,
Please read the following article about permissions required by service accounts.
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110).aspx#Serv_Perm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
I do not see any special permission that is needed as per the article. For e.g. as per below:
SQL Server Service
Permissions granted by SQL Server Setup
SQL Server Database Engine:
(All rights are granted to the per-service SID. Default instance: NT SERVICE\MSSQLSERVER. Named instance: NT SERVICE\MSSQL$InstanceName.)
Log on as a service (SeServiceLogonRight)
Replace a process-level token(SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
I am running Database Engine service as DOMAIN\SQLADMIN account which can Log On As A Service. Other 3 permissions mentioned in article are not given so let me assign it and then see how it goes.
Could this issue be due to some domain policy? Because there is another SQL Server machine which shows same behaviour.

Windows Server 2012 Standard - Remote Desktop Management service won't start

Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!

Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Oracle8i on Windows 2000 Server - Oracle Instance don't auto start

I've installed the Oracle 8.1.7 on a Dell Pentium III server running Windows 2000 Server operational system. During the installation the Oracle Instance was started up, but after I reboot the computer, the Oracle Listener service and the Oracle service was started in automatic mode but the Oracle Instance do not started though.
My Oracle DBA teacher ask me to run Oradim and edit the Oracle configuration startup parameters. I did, but it didn't solve the problem. The values on Windows registry of the ORA_<SID>_AUTOSTART key is "true". The Dba Studio also gets information form the Oracle server and all the fields seems to be correct with auto-start option, but it didn't work out.
Can someone point me to any text I can read about installation troubles on Windows 2000 Server ?
Thanks in advance.
Jayme.

Hi
I don't have an 8i db to test on but I think it works the same as on 9i.
Check the following parameters in your registry in the key HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0:
ORA_<YOUR_SID>_AUTOSTART=TRUE
ORA_<YOUR_SID>_PFILE=<full path and file name of your init file>

Http server in the same oracle home or not ?

Hi, finally i could install oracle 10g 10.2.0.3 on windows vista. Now i want to install http server but i wonder if i have to install in the same oracle home or in another one. Some documents says yes another one not.

oracle_sv wrote:
I would like to keep 10g version. I have the cd companion. The fist time that i tried to install give some errors and after that i couldn´r start OracleDB console and EMOuch! I suspect that was due to installing HTTP Server binaries in your Oracle home?
I have only installed HTTP Server on Linux, and I had a separate home for the Oracle database binaries and HTTP Server.
The installation (at least on Linux) was straight forward, provided you have done your prep work by installing the correct RPM's, environment, etc.
Once you have HTTP Server installed, you have to fulfil the rest of the APEX requirements (if not already done), such as:
- Patch HTTP Server (for Linux, this is Application Server Patch 5983622)
- Install XML DB
- Install Oracle Text
- Upgrade PL/SQL Web toolkit
- Install APEX (I had 3.12 originally installed, but recently upgraded to 4.0 which was painless).
- Configure your Apache/modplsql/conf/dads.conf in your HTTP Server home
You will need to read the installation guides on how to do each of the above. You might have more luck doing this on Linux than Windows.
If I was in your position and starting from scratch on this, I would be installing 11g, as it might not be so much work since APEX comes as part of 11g.

Oracle Lite service won't start

Hi,
I need help starting the oracle BPEL process manager.
I have installed the oracle BPEL process manager but it seems that it won't start because the Oracle Lite service cannot start.
When running C:\OraBPELPM\bin>olsv2040.exe /debug in a command prompt, I get the following error:
Debugging Oracle Lite Multiuser Service.
Service start failed, please check your environment
For more information enable service trace
Do you have any ideas how I can make the Oracle Lite service to work?
Presumably that will also make the Process Manager to start.
Thanks!

Hi again,
the port 1521 is free.
I have installed Oracle BPEL Process Manager 10.1.2 on Win2K (BEA WLS).
I also installed Oracle Lite as a Windows service.
When I try to start it as a service through a command prompt, I get the below error:
The Oracle Lite Multiuser Service service could not be started.
A service specific error occurred: 4294966385.
When I try to start it from the Windows Services system tool, I get the error:
Service specific error -911
I have also checked all ini files in the Windows directory and they look correct.
Any idea what could be the problem???
Cheers,
Akis

Standalone server with ASM & database, oracle HAS service not auto start

Similar Messages

Maybe you are looking for