SPM configuration and log report email

Hi all,
I'm configuring the SPM in the ECC system. I follow the note 1065048 but I don't receive any email about the report log of the activity done by the firefighter, but I receive the mail about the login.
What can I do to fix the problem?
ps:
the report /VIRSA/ZVFATBAK takes a long time to finish
the report /VIRSA/ZVFAT_LOG_REPORT always dump for no space to extend an internal table
Edited by: place87 on Oct 7, 2010 5:04 PM

Luchinho,
Firefighter background job picks data from STAT files and table CDHDR if FF configuration parameter 'Retrieve Change Log' is set to YES.
STAT file is maintained my RSCOL00 job, which should run hourly in your system.
So please schedule it first.
Then check what is size of CDHDR table, as select query on this table takes long time if table is too big. In that case, you may have to create Index on this table. There is one SAP note for this, don't remember the number please search with 'CDHDR' under GRC.
There are few parameter in configuration which send Log Report mails immediatly, so you need to set them to yes. This means your controllers will get Log Report mails every hour when /VIRSA/ZVFATBAK runs.
Pls refer to SAP notes 1494107, 1430336, 1065048, .
regards,
Surpreet

Similar Messages

Customized Email Content for Firefighter login and Log report

Hi Experts,
Is it possible to customize the email content (subject as well as body) for Firefoghter login and log report notifications. This is required on GRC AC 5.3 SP10.
Thanks
Davinder

No, D P. You can not customize FF emails. They are hard coded in the ABAP programs.
Alpesh

How to config and start reports developer on Linux

Hi, I installed Oracle9iDS on redhat7.2, which includes jdeveloper, forms developer and reports developer. How do I configure and start reports developer? What are the commands I should use?
Thank you a bunch.
Yingping Huang

Hi,
Please go through the Reports 9i documentation at http://otn.oracle.com/docs/products/reports/content.html.
Thanks,
Rohit

SPM Reporting - Log reports display on front end

Hi,
We have implemented GRC 5.3 and have an issue on the SPM reporting through the front end.
We have done config in dev and have the following jobs running in the background every 1 hour:
1. /VIRSA/ZVFATBAK
2. /VIRSA/ZVFAT_LOG_REPORT
3. /VIRSA/ZVFAT_V01
4. /VIRSA/ZVFAT_V03
The log on the back-end displays all activity of FF user, but when going to the front end I seem not to get any reports to display.
We have created the connectors via the config page, but when trying to drill through the selection criteria we found that the FF user does not come up as a selection variable. We see the system defined though.
Any suggestions how to get the reporting to display on the front-end?
Kind Regards, Melvin

Santosh,
You should only need the /virsa/zvfatbak job running in the background. However, if the emails are not triggered for the log reports, you may wish to schedule the /virsa/zvfat_log_report program to run after completion of /virsa/zvfatbak as that is the program which actually sends the notifications.
Regarding the RFC user, check the authorisations held in the Firefighter Administrator role as those will not be too far away!
Simon

1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

Hi,
I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting âCSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23â.
Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
Other reports are working fine.
1. TACAS+ Accounting - not working
2. Logged in Users - not working
3. TACAS+ Administration - working
4. Passed Authentication - working
5. Failed Attempts - working
Any suggestions or any idea, please revert.
Regards
Vineet

Hi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet

Audit Log Report not display and error is "Report Contents No data"

Dear All,
i have reuired the audit log report but when i am click the Site Action->Site Setting->Audit log reports->Run a custom report-> select the day and option and click ok the i have received the error
Please help me please check below screen shot

Can you please confirm that you have configured events to audit?
Configure
audit settings for a site collection
Here is step by step how to configure audit setting.
http://anthony-verschraegen.blogspot.ca/2013/04/sharepoint-2013-configuring-audit.html
Amit

Can we configure mirooring and log hsipping both DR in one database?

Can we configure mirooring and log hsipping both DR in one database?
If yes how it does work.
Many Thanks
Shashikala

You
CAN definitely use log shipping and mirroring at the same time. You can make use of log shipping to ship the log to a remote site for DR and have a database-mirroring, high-availability configuration locally. However, Sometimes it
is a slight bit tiresome to set up log shipping going the other way once a failover has occurred, whereas mirroring is easy in that portion.
Some DBA use this two together if you they have to use bulk-logged recovery model, since mirroring only uses the full recovery model and in another scenario in database mirroring, we cannot
use mirroring database as reporting (cannot query) unless we don’t create snapshot out it, but in log shipping, the database is in standby mode so we can query if it is not being restored at the same time.
Please remember to click “Mark as Answer” on the post that has answered your question as it is very relevant to other community members dealing with same problem in seeking the right answer

SPM Detailed Role level Reports don't show and other minor usage issues

We have successfully installed SPM on our DEV and QA boxes and are trying to test our reporting. We have setup role based firefighter and have got it to work on the ABAP side as well as on the Java side. However, when I go to the Role Reports in the web UI for SPM, and I run the Log Report, I have a problem.
The Log Report pulls the role firefighter data from the backend and displays it. There is an icon at the top right called "Display Detailed Reports", and upon clicking it, it tells me there's no match or conflict found.
However if I go into the firefighter tcode and then look at the same logs, there is a little more detail which I'd have expected to see in the web based detail report.
Do you know what I'm missing? I already checked the trace for any auth failures, and there is no auth failure.
Thanks,
Santosh

Santosh,
Which traces have you run? I have a few similar issues which may benefit from running a trace.
The only other authorisations I would check is that the RFC / Connector user has the authorisations to be full logs in both the backend and web versions.
Simon

Someone logged in and changed my email

Someone has logged into my skype account and changed my email address.
I can still log in via facebook, but I can't change my email nor the password.
I sent a account reactivation request, but got a form letter with a link to a form that doesn't load in my browser.
The skype customer support page appears to be broken both for me and for other users. I can't find a good way to contact Skype other than via their twitter account.
What should I do?

Hi, nhicao93, and welcome to the Community,
Please see the "Hacked Account" section in this FAQ article for next steps:
https://support.skype.com/en/faq/FA10946/what-should-i-do-if-my-account-is-suspended-hacked-or-compr...
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How do I go back a page on the Ipad mini? I do not see any arrows anywhere. Also when I go to my yahoo email account and open an email I can not find how to go back and log out. This is our first Ipad and it is very different frm android. Thanks

We just purchased our first Ipad. It is a mini with retina display 16 GB. How do I go back a page? I see no arrows to page back. Also when I log into a yahoo email account and open an email I see now way to log out? Thank you for any help

In Safari, (the web browser), there are specific arrows to go back and forward through website pages.
In other Apps, it will depend on how the App is built.
As to Yahoo Mai it depends on where you are viewing the email. If you are using the Mail App, then you don't log out. The Mail accounts in the Mail App are always there.
If you are using the Yahoo App, You can Tap on the folder at the top, then on your account/name, and then on Sign Out.

Workflows 2013 and SQL Report Services: Configure on Independent Servers or Existing App Servers?

Currently, my SharePoint 2013 Farm has Workflows 2013 and SQL Report Services installed on app servers, along with other applications. Workflows 2013 isn't working correctly (installed prior to my coming on board with the organization), I'm assuming it
is a configuration issue, but rather than re-configure, I've read that is recommended to be a standalone server. It was also recommended by a MSFT rep that our report services have its own independent server. Currently, Report Services is also installed on
an app server that runs other applications on the farm.
Has anyone had any experience with installing Workflows 2013 and/or SQL Report Services on independent vs. existing application servers?
Additionally, my existing application servers have 24 GB of RAM (I believe the recommendation for SharePoint production environments is 12 GB), should I plan for the potentially new servers (Workflows and Report Services) to also have 24 GB of RAM? Not really
sure if it will be needed if they have dedicated tasks.
Thanks for any input you can provide!

It entirely depends on load. WFM will work just fine installed on servers in the SharePoint farm. SSRS preferably should go on the end-user facing servers for better performance.
The questions you're asking are all "it depends" :)
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

E-Commerce Catalog error and log configurator probelm?

Hello,
I am trying to browse a B2B shop (http://server:port/b2b/b2b/init.do) in CRM 5.0 and getting following error message:
The catalog that you have selected is currently unavailable; try again later
I am using CRM 5.0 System (IDES Client) and basically trying to setup a E-Commerce development environment.
Following are the steps i have done so far for E-Commerce configuration:
1. Configured ISADMIN (http://server:port/isauseradm/admin/xcm/init.do).
1.1 Changed following params for Start->General Application Settings->Customer->isauseradm->isauseradmconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
>> AddUserToPartner: true
>> AcceptExistingUser: true
1.2 Created a new JCo connection under Start->Components->Customer->jco and entered my back end CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
1.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_ISAUSERADMSTD:
>> Base configuration: isauseradmStandard
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
>> backendtype: crmdefault
>> usertype: CRM_Standalone
>> uidata: default
2. Configured B2B (http://server:port/b2b/admin/xcm/init.do).
2.1 Changed following params for Start->General Application Settings->Customer->b2b->b2bconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
2.2 Created a new JCo connection under Start->Components->Customer->jco and entered my backend CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
2.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_B2BCRMSTD:
>> Base configuration: b2bcrmstandard
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
>> usertype: CRM_Standalone
3. I was really not sure if ShopAdmin config is required or not but i did it. Configured SHOPADMIN (http://server:port/shopadmin/admin/xcm/init.do).
3.1 Changed following params for Start->General Application Settings->Customer->shopadmin->shopadminconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
3.2 Created a new JCo connection under Start->Components->Customer->jco and entered my backend CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
3.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_CRMSHOP:
>> Base configuration: crmshop
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
4. Restarted CRM J2EE.
5. Setup TREX 7.0.
5.1 From TREX Administration, created a new connection (Type A, i.e., using System Number and Application Server Host) for CRM System and also RFC Dest. (sm59) in CRM System.
5.2 Restarted TREX and connected this connection.
5.3 Following are the visible column values for this connection in TREX Administration:
>> Connection Status: <connected>
>> Configuration Satus: Green
>> SAP System: CRM
>> RFC Destination: TREX_DEFAULT
>> Gateway: local
>> RfcServer Instances: 1 (no automatic changes)
>> TREXRfcServer Processes: 1
>> Workprocesses: 6 (4 DIA, 2BGD)
5.4 Did a RFC Connection test in CRM System using SM59 which was successful as well.
5.5 Using Transaction SRMO (Retrieval : Search Server Relation Monitor) in CRM System changed the RFC Destination for Search server ID DRFUZZY (for both I and S type RFC Server destination action) to TREX_DEFAULT. Did a connection test for this and it was successful.
6. Initiated Replication using transaction COMM_PCAT_IMS_INIT with following params:
>> Product Catalog: PCSHOP
>> Variant: VAR_EN
>> Search Server Relation: DRFUZZY
>> Publishing Computer ID:
>> Allows Parallel Processing:
>> Publish Documents via HTTP:
>> Transfer Document Content: X
>> Package Size of Indexing: 5,000
>> Processing Existing Indexes: Overwrite Index Only When OK
>> Behavior when Error Messages Occur: Cancel Variant Replication
7. Logged into ISADMIN User Config (http://server:port/isauseradm/useradmin/init.do) and created a new user using the option New User and New Contact Person with an existing company of type Sold-To Party and which belongs to the sales area that is linked with PCSHOP Product Catalog (from IDES data).
Now, when i log into B2B Page (http://server:port/b2b/b2b/init.do) using the newly created user and click on the shop PC4BIZ_EN i get following error message:
The catalog that you have selected is currently unavailable; try again later
I also created a new Product Catalog and did the Initial Replication still getting the same above error message.
Can anyone please tell me what am i missing or what mistake i have done?
I even restarted CRM System, but the result is still the same.
Also, how do i check the log files for B2B? I checked the E-Commerce Admin Console (http://server:port/b2b/admin/index.jsp) and clicked on the logging link, but i get the following message:
Logging is now configured centrally in the J2EE Engine Visual Administrator (server service: Log Configurator)
How exactly do i configure and what is the right path for B2B Logging in J2EE Visual Administrator? And where will the log files for B2B be stored on the server?
I would really appreciate (and of course award points) for your help on this.
thanks and regards,
Vasu

Thanks for the Note reference. I will go through it now and try to check the log files.
And regarding the error message i don't think it could be because of The Catalog variant is not set right in the Shopadmin application as all the values in Shopadmin seem to be correct. Anyhow following are the current values selected for the custom Product Catalog I created:
Shop Id: ZTEST
General Information
--> Usage
> Business Scenario: Internet Sales B2B
--> Authorizations
> Authorization Group: <blank>
--> User Administration
> Partner Function Contact Person: 00000015
> Country Group: <blank>
--> Billing Documents
> Display of Billing Documents: No Billing Documents
--> Store Locator
> Display Store Locator: <blank>
Catalog
--> Product Catalog
> Catalog Search: <blank>
> Catalog: ZTEST
> Catalog Variant: VAR_EN
> Catalog View: <blank>
> Hide Internal Catalog: <blank>
> Controlling Price Determination in the Catalog: via IPC
> Profile group for pricing related attributes for exchange products: <blank>
Transactions
--> General
> Allow transaction management for other business partners in hierarchy: <blank>
> Large Documents: Display All Items
> Document type can be chosen late: <blank>
> Batch Processing Permitted: <blank>
> Display product determination information: X
--> Order
> Choose Order Types: Order Type
> Order Type: ISBB
--> Order Template
> Order Templates Allowed: X
> Order Type: ISBB
--> +Quotations
> Creating a Quotation: No Quotation
--> Contracts
> Contract Determination: <blank>
--> Contract Negotiations
> Allow Contract Negotiations: <blank>
Marketing
--> Global Product Recommendation
> Display Global Product Recommendation: <blank>
--> Personalized Product Recommendation
> Display Personalized Product Recommendation: <blank>
--> +Product-Related Proposals +
> Display Product-Related Proposals: <blank>
--> +Campaigns +
> Allow manual entry of campaigns: <blank>
Auction
--> Auction
> Auctions allowed: <blank>
Regarding the reason "The Catalog was not replicated properly and is hence unavailable on TREX", is there any way to verify this? When i ran Initial Replication (transaction COMM_PCAT_IMS_INIT with the values i said in my first post) everything was green.
Also, how do i clear the Catalog Cache? Is it the same as clearing the Catalog Cache Statistics in E-Commerce Administration Console (http://server:port/b2b/admin/index.jsp)?
Thanks and Regards,

My macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

That indicates a hardware failure. Read here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm.

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it so anyone can help me with it or can i put another apple id to it without putting the first password?THANKS FOR YOUR HELP.

Then call AppleCare and talk to someone in account security.

Usage Report and Audit Log report showing different totals

I am trying to understand the differences displayed in two similar reports. The first report is an 'Audit Log' Report and it is displaying the number of Resource Account creations over a time period. The second report is a Usage Report using the exact same criteria (objectType = Resource Account and Action = Create). The totals I get back are VASTLY different. Can anyone explain? Is this a known bug?

Hi,
In any report we don't show the storage policies information. In Cost report if the storage policies have different rate factors then we will show the split for the storage information. But in usage report , rate factors will not be applicable as we don''t show the cost details. Hope this clarifies your question. Please let us know if you need more information.
Thanks,
Lakshmi

SPM configuration and log report email

Similar Messages

Maybe you are looking for