SPRM 7 and stories -- problem!!!! help!

Hi everyone,
This is very strange... So I am totally confused by why this is happening. Basically I have a main track with many chapters, and seven stories based off of using different parts of that main track.
Before playing the 7 stories, it stores which story you are playing as a GPRM called (this_practice).
Then via button highlights over video, if you jump to a sub-video during the story, it stores SPRM 7 into a GPRM (called chapter_data).
So for example-- right now upon watching the simulator's info tab, I see that for example I am at part of title 13. I press "enter" for the button over highlight.. I see my chapter_data set to 13. and this_practice set to 4.
Ok, so when the sub-video is finished, it is supposed to jump back to where you were on the disc (chapter_data)..
so I have a script which reads:
Jump myTrack::story1 [chapter_data] if (this_practice=1)
Jump myTrack::story2 [chapter_data] if (this_practice=2)
etc... all the way through the stories..
ok, but instead, when I watch the inspector, it jumps back to the wrong chapter, but I have detemrined that this only happens with the stories.. If I play the entire track, it jumps back to it's proper place.. and from what I can tell, it appears to be jumping in reference to the original track, rather than the stories.... And I am confused why... For example, story 4, has 2 chapters missing-- and there fore when it should have jumped to part of title 14 (and chapter_data read 14 in the inspector), it went to part of title 16.
Does anyone know why this is happening??
thanks.
-patrick

hmm.. Im not sure if we're talking about the same thing-- but maybe?
let me explain better...
#1, this is for a yoga video.. So I have preferences that say meditation on / off, spinal warm up on/ off.
So.. I have my main title.. the video with meditation and spinal warm up.
then I have stories with:
meditation and no spinal warm up,
no meditation and no spinal warm up
no meditation and with spinal warm up
.. Ok during the video, when ever you see a yoga pose, you can press enter and it will take you to a tutorial where you learn how to do the pose. After the tutorial is over, it's supposed to take you back to the beginning of that pose in the practice.
So.. when the user pushes enter to watch a tutorial, it goes to a script that gets the SPRM 7 and stores it in gprm "chapter_data". It then jumps to the particular tutorial..
after the tutorial video plays, it goes to a script which then determines which story to resume playing depending on what the meditation/spinal warm-up settings are.
... So, my problem is, if I play any story, at the end of the tutorial it takes me to the wrong spot... Like in my last example, when chapter_data is clearly set to 14, upon jumping to a story with [chapter_data], it shows the PTT is 16 rather than 14...
Is the answer to figure out how many chapters are missing from the stories and subtract those values from chapter_data or is there a better way?
-patrick

Similar Messages

HT1918 i need to remove my credit card info its been declined now im blocked from itunes and store need help

my credit card is being declined and now blocked me out of itunes and store yet wont let me update my card info what do i do???

We have the same problem. it looks like uyou will have to cancel the card.( really inconvenient) I know. then we just used itunes prepaid cards. we feel a little smarter doing it this way.

App Store and Download problems - Help If Possible :(

Hiya. I am New. Sorry for delving straight in for help, but I don't know what I have done here, and I hope someone can help me rectify my problem. I received my BB last week and set it all up - working fine. A colleague of mine directed me to the App Store, and I downloaded that via the handset with no problems. I was able to download the FB, some themes and a dictionary app via the store and was able to access it just fine. Yesterday, I tried to install some new apps and themes via the Desktop Manager, and now the App Store has dissapeared from my handset. I tried to re-download it via my BB and it says something like 'Sorry, this device does not meet the requirements to download App store' and I cannot download any Apps at all. FB and Dictionary are still there, but the themes I tried to put on via DM are not. I removed battery and memory card, and tried again but still get the same message. I tried to put App store back via the DM. It says it was loaded successfully but its not in the handset. I deleted all the themes I had originally downloaded from app store in the hope something was causing a corruption in the handset software but that hasn't worked either. I haven't installed any updates (to my knowledge) and the contract plan i have with my provider doesn't impose any limits to my usage as I have opted for the unlimited package (Tesco Mobile) I can't understand how last week I was able to download and use App store just fine, but now it is saying my handset doesn't support it, and I can't download or install any new Apps, Games or Themes via the desktop manager either. Sorry for rambling on, but I was really happy with my new BB, and now I am afraid i have unwittingly bricked it! Any advice gratefully received! TIA

You can change the settings in Security & Privacy to "Anywhere"...
That should work... as to whether the printer driver will work, that's another question.
Good luck,
Clinton

Iphone and Ipod problem help me!!

I just bought a iPhone and I want to give my iPod to my boyfriend but I only have one computer there for I only have one way to get to my iTunes,me and my boyfriend have different tastes in music and he doesn't want my music and vise-versa I've tired to change our apple IDs but I cant seem to figure it out :-( Please someone help me I want to try and not go to the apple store
Thank you!!

The iPhone and the iPod sync characteristics are configured separately. The iTunes application keeps track by S/N. Apple ID doesn't matter. (I currently have two IDs and the only problem is very minor - log out/in to update apps obtained with the "wrong" ID.)

Multiple sudden booting and other problems: Help!

I have experienced a sudden problem that makes me afraid to shut down my iMac until I sort it out. I have had it for five wonderful, flawless years.
When I tried to boot today, four times it would not. I got to the grey Apple screen and a processing "clock," but it would not go beyond that in any reasonable time. I finally left it running trying to boot. It did eventually, but glacially slow. Then, there was a message that: "!You have inserted a disk containing no volumes that Mac OSX can read. To continue with the disk inserted, click ignore." However, I had NO "disk inserted."
More wierdness followed.
I tried to insert a memory stick to backup my hard drive, and got the same "disk containing no volumes that Mac OSX can read" message. This is the same stick onto which I have previously backed up with no problem.
I then tried to run my McAfee virus scan, but wanetd to update it first. It does not appear to update, even though it says that it is doing so. The starting message continues to say that I last updated months ago. The Virus scan did, however, apparently run using whatever version it actually had in it, and reported only 2 noncritical errors.
I then tried to run Disk Utility, and it won't launch. I "bounces" up an down in the Dock, but then just closes.
I then opened iMail, and all the previous messages showed as unread, even though they actually all were read.
So, I almost could not boot, get a weird "unreadable disk" message, can't get the drive to recognize a memory stick in order to back up to it, can't update my Virus protection, can't run Disk Utility and am getting weird iMail .
Other things seem to be working okay, although sometimes very slowly.
What's going on, and what do I do?
Separate question: I want to insert a disk into my CD tray to use as a startup disk if I encounter another booting problem. Which CD do I use? Mac OSX Install Disk 1? Mac OSX Install Disk 2? (I think all the Software Restore disks include applications other than the OSX.
Final question: how do I get the CD tray to open on the front my iMac (the "tongue" type tray out of the round base) if I have another booting problem, so that I can insert a disk to use for startup?
HELP! (thanks)

Ali,
Sorry for being slow to respond. I have been trying to get things fixed with Repair Disk.
To answer your question first, my hard drive is 74.52 GB, with 55.59GB available, so I don't think that's the problem.
Quite a few things (but not everything) work once the hard drive boots, which is VERY VERY slow. However, any other media I try to use to backup (Memory sticks, CDs) can't be recognized. I get the "disk containing no volumes that Mac OS X can read" messae. The CD's also produced a message when I tried to name them of an "unexpected error."
I followed your repair instructions, but it did not solve the problem. The Repair Disk effort produced an error message under "Checking catalog file" of "Keys out of order." I ran Repair Disk multiple times (at least 10x), but the same message kept coming up. I also tried running Repair Permissions, which took about four hours to run. Repair Disk produced the same error message.
I also found an older Discussion string of messages about application Chess (installed with the basic Mac install disks) being corrupted. I trashed it. No difference.
That message string also talked about some people having problems after installing iTunes 6.0.2, but I am running 7.0.2, and it has been on the computer about two weeks beforre any of this started.
I will try Sherry Johnson's suggestions next.
thanks for your help.
Eliot

Photo books and store problems

Whenever I want to send my photo book i get the message that the shop is currently not available? how long does this last? any troubleshooting? Who can help? I would like to have the books for xmas

Hello, Pascal
It does seem you have tried most of the things that help other users.
Although you do not say which iMac you use, as I understand your post, yours has a built-in iSight. If that is correct, when you look in System Profiler and click the following items:
you should see your camera information. If not, your iMac likely needs professional service. Before you go to see your Apple Service Technician, you can consider any of the following items that you think might be relevant. Although some of the following are not a remedy for no iSight in System Profiler, they might help you or other readers who can see their built-in USB iSights in System Profiler but are still experiencing the "camera in use" error.
Do you use the "Mirror" widget in Dashboard? That is one application that people sometimes forget might be running.
If you use an HP printer/scanner, check the suggestion in this post by parkersal.
If you have not yet tried all relevant suggestions in How to Troubleshoot iSight, do so now. Be sure to check whether the problem is application specific as well as user specific.
I understand that you have already reset the SMC, but, if the reset and other Troubleshooting suggestions you perform now do not correct your problem, you can try the following:- Repair permissions.
- Then download and apply the appropriate combo updater for your iMac:
Mac OS X 10.4.9 Combo Update (iNtel) or
Mac OS X 10.4.9 Combo Update (PPC)
- Finish with another Permissions Repair, and then check your iSight and System Profiler again.Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates, but if your iSight still does not show in System Profiler, I think you should see your Apple-Authorized Service Provider for service.
Please let us know what it takes to get sorted.
Cheers,
Jim

Premiere CS6 Indexing and Pending Problems - HELP!

Gentlemen,
Any help you can offer on this would be terrific.
The problem is.....I have begun editing a feature in CS5, we set up a different project for each scene, 48 in total. Then upgraded to CS6.
When I open the projects in CS6, some of them work fine. However, most of them don't, and they have the same problems, which are;
1. All the media doesn't load. The status bar in the bottom left tells me there is xx "Remaining" (See Pic)
2. The files don't index. Above the project window the message "Items to Index XX" appears.
However, when I save one of these incomplete projects in CS6 and then open it in CS5, there are no problems. My scratch disks for 5 and 6 are the same.
I've searched and searched and this appears to be a common fault, but I can't find a solution that works for me. I've tried the following;
1. Uninstalling and re installing Premiere
2. Updating to 6.0.3
3. Cleaning media Cache
4. Replacing the missing files and then reloading
5. Temporarily removing all the preview files
6. Leaving a project open for 16 hours to see if it slowly indexes
None of this works. If anyone has the answer I would be very gratefull, I don't really want to restart 48 projects and I don't really want to go back to CS5, as CS6 is much better for the Matrox system.
I'm using MXF footage, from P2, 720p. I have noticed that this problem doesn't occur with projects that use other footage types.
My system is.....
Windows 7 Pro 64bit
8gb Ram
Many Thanks in advance for any help you can offer.

Thanks Jim,
just tried that.....unfortunatley no luck.

Iphone and email problems - help please!

I have a few questions about email on the iphone I wondered if someone could help me with?
1. If I check my email at home on wifi everything is fine, I can recieve and send emails no problem. If I am outside and using GPRS ( Not found an EDGE signal yet ) I can recieve emails but when I try and send one it tells me it cannot find the outgoing server after trying to send the email for a few minutes.
2. Sometimes I open my email and its fine but when I go back and try and open an email I have previously read it says "This message has not been dowloaded from the server". How do I get the email to stay there?
Thanks guys

See my reply on this post.
http://discussions.apple.com/message.jspa?messageID=5842248#5842248
In sort, even once you view it, it will not remain in the Inbox for ever...it will attempt to redownload if accessed later.

New Address Book SYNC and ITUNES Problems- HELP!!!

When I try to tick the check box to syncornize my address book in my iPod preferences panel, I get the following message: "No contacts available- contact syncing cannot be enabled because there are no contacts available. Do you want to open Address Book and create contacts now?" When I do, Address Book opens (full of the 1100 contacts), but does not resolve the problem. Neither does deleting then reimporting the contacts, nor restoring from back up, nor Disk Warrior's rebuilding of the Directory.
Likewise, when I try to use iSync with my phones (until recently working by the way), I cannot tick the sync 'Contacts' box and then choose a phonebook, as it just gives me All Contacts as the only option. And even then, when I try to sync, I get a "sync failed" message.
These probelms started occurring after a kernal panic that happened when I connected my Sony Ericsson w800i to my computer via a USB cable. iPhoto and iTunes freaked out, but have since been restored to working order. But when I connected the new video iPod for the first time, I couldn't get it to sync with Address Book nor iCal. iCal works today, but not so the Address Book.
Yikes....if anyone can help, I'd appreciate it.
A

THANK YOU for this solution; after trying MANY things to get my addresses to sync again, this fixed my sync problem! One suggestion I would add is if you try this, be sure to check the box "sync notes when exporting vCards" (Address Book: preferences) before exporting. The first time I lost my notes, but just removed the folder again and exported with notes. I had to recreate all my groups, but a small price to pay to get my addresses syncing again to my iPod.
I think one of the address files may have become corrupt, POSSIBLY after my iPod appeared to be stuck during a sync one time, but I later discovered that there was a sync dialogue box hidden behind iTunes waiting for my response. Problems seemed to start after that.

IPhone 3gs reception and connection problems, HELP!

My iPhone 3GS is having mutiple issues, including battery life, making and receving calls, making and recieving texts, and connecting to the internet. Lots of calls that people try to make to me never show up, and ones that do drop. It takes a few trys to get my calls to go out. Texts are the same way. Internet is sluggish and has trouble loading things without WIFI. My phone also has an overall sluggish-ness.

I tried again to restore last night. But now, restore wont complete. An error comes up after the firmware download to the phone. Now the phone is in recovery mode?
I went this morning to the Apple store - no appointment, silly of me :\. they they didn't have any open appointments today, so I made one for WED Morning, untill then, I will pull the sim card and put it into my trust old Blackberry curve

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

Hi i have problem with my mac os x10.5.8 i cant't download new upload ?and the problem is that i can't found my app store on my mac .any help plz

hi i have problem with my mac os x10.5.8 i cant't download new upload ?and the problem is that i can't found my app store on my mac .any help plz

If you can... you need to Upgrade your OS X to 10.6.8
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs > http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

I bought a song on ITUNES and had problems downloading it. I got in touch with support and and they downloaded the song to my account but now when I try to play it, it tells me my computer isn't authorized to . Reauthorizing computer doesn't work. HELP

I bought a song in ITUNES and had problem downloading it. I contacted support and they downloaded the song for me. Now when I try to play the song, I get a message saying my computer isn't authorized to play it. I try reauthorizing but that doesn't work, just keep getting the same message. Can anyone help?

Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

SPRM 7 and stories -- problem!!!! help!

Similar Messages

Maybe you are looking for