SQ01 Query & Default Values

Dear All,
I have created a query in SQ01, in order to get some values from J_1IEXCHDR & J_1IEXCDTL.
Now I wish to get values ( viz. Excise Invoice type, Excise Grp etc. ) defaulted in selection fields. For this I have also maintained one variant.
Now I want this variant to appear qutomatically whenever user runs this query.(User should not feel the need to select the variant)
How can I achieve the same?
Regards
Nikhil

Hi,
You can get the default values in the your query by:
First, create a t-code for your Query.
Second, Create a transaction Variant for the transaction, selecting the "with content" option.
This will make your Query defaulted with the values all the time.
Hope this will help you.
Regards,
Vijay

Similar Messages

  • ABAP query - default value in selection parameter

    In ABAP Query, how to get a default value into the field which is in selection screen?

    hi priya,
    You can specify a default value to both a Parameter and a Select-Option with the following addition
    Default <value>
    E.g.  Parameters : p_date  TYPE sy-datum  DEFAULT sy-datum.
            Select-options s_date for sy-datum default sy-datum.
    thanks
    Sachin

  • Bex Query Default values and warning

    Hi,
    I noticed that if I use DEFAULT VALUES (ex. I set a CostCenter on a fixed default value), when I launch the query a warning like "the costcenter characteristic haven't a base date for XXXX" (XXXX is the value I fix).
    I don't understand why this message appears and how to avoid it. I also tried to set the key date on the query but the result is the same.
    The costcenter is a characteristic that has a time dependent master data.
    Any idea?
    Thanks for the support!

    Hi Maresca ,
    I am not completely sure as to why the warning message appers, but you can avoid the warning messgae by suppressing it in the transaction RSRT.
    After going to the transaction RSRT, you can give the query's technical name , and click on the 'Messages' tab. Here you can supress the warning message. Each message has a message number which can be found by clickin on it, and you can check the message brain number and supress it.
    Hope this helps !
    Regards
    Snehith

  • How to set default value in select option for ABAP query

    Hi experts,
    What is the way to set up default values for select-options in ABAP query.
    e.g.
    I have one field 'Year' in my ABAP query selection screen.
    I want value of current year to be appeared here whenever user execute report
    Thanks in Advance
    -Harkamal

    Hi Harkamal,
    execute your Query via SQ01. On Selection-Screen
    goto save Variant. Mark your field
    as selection variable an press Button election variable.
    Take variable from TVARV and use it.
    Than save the Variant.
    Look at TVARV if the 'Year' is updated to the actualYear!
    regards, Dieter

  • Infoset-query-selection-screen-default-values

    Hi All,
    I am having the requirement as I need to put default values in the selecion-screen of the report by using  Infoset query. Let me know the settings required for this.
    I am using SQ01, SQ02, SQ03 T.Codes.
    And I need display  one record only if any field contains mulitple records, for example in the HR-ABAP, field p0105-usrid contains multiple values depending on the subtype.So, I need to display USRID when URSTY = '900'. All these should display by Infoset query only.
    Pls help me in this scenario , its an urgent requirement.I am very much thankful for you for reading my proble, if you will provide some sort of solution, I feel very happy.
    Advance thanks for this .
    Regards,
    Prakash.

    Prakash,
    To default the values on your selection screen, you will need to do some ABAP I guess. (if you do not want to use variant). Open up the infioset in SQ02 and then goto code option for the PNP**** field and then you can code to initialize the selection screen variables. Test with an ABAPer.
    To display multiple records as multiple columns, you will have to create custom fields in infoset, and then go from there. Again see ABAPer.

  • BW Query variable default value put in Crystal report variable question

    Why BW Query variable default value put in Crystal report variable for BO InfoView to open crystal report.
    I using Analyzer to open bw query,variables had default value ,but crystal report can't had variable default value ,and can't search variable  value.
    pho:
    [http://file.itpub.net/f/e38876ad4f6efb7e73980488e7d71f8d/4ae940e9/day_091029/20091029_2b04da1232144feba180OrB23SNvXtoT.gif/p/1.gif]
    [http://file.itpub.net/f/d93ddfe61e0eaf80429726c61f1a02ff/4ae940e9/day_091029/20091029_3211ffe04bf0302fbab5FRKnbwmH80p7.gif/p/BW_QUERY_Crystal.gif]
    Edited by: flying on Oct 29, 2009 8:20 AM

    I Know what to do .
    but Crystal report date variable value are Garbage characters "###".
    PHO:
    [http://file.itpub.net/f/39a8510104476707ae21c945db93ecba/4ae97949/day_091029/20091029_32dcbb7e7d99141483aesJ9KBJHXN0Kj.gif/p/2.gif]

  • Setting a Default Value in SQL Query Report

    Hello:
    We are using a SQL Query Report to provide a mass update to a table. We are using the apex.collection and having it display a number of records in a SQL Query Report for mass update. We have 14 columns in the report, for which the first 11 are populated via the collection. The remaining 3 are open for input but the individual making the updates. We've were able to provide a default value for 2 of the remaining 3 columns using a named LOV's - however the fourth column we would like to default a sysdate - but we are not successful.
    We've attempted many things but none seem to work, including adding that column to the collection and assigning it a default sysdate value. We've also tried changing the settings in the report attributes --> Tabular Form Elements by setting the Display as to: Datepicker, Default type to PL/SQL Expression and setting the default to sysdate. We've also tried caputuring a date on the previous page and loading it onto the report page and trying to default the date column to a page item default.
    I'd appreciate any help.
    Thanks
    FYI - we are using version 3.2

    use as default
    to_char(sysdate, 'dd/mm/yyy') where the format is your application or item date format

  • How to use SYSDATE as a default value of a bind variable in a query report?

    Hi,
    I want to use SYSDATE as default value for a bind variable in Query based report.
    I don't see any way to do it, someone helps?
    Thanks a lot.
    Paulo.

    You can aslo use #sysdate directly.
    Hi,
    The way I'm doing in my report is, I have a database function (f_ret_sysdate) with the following code
    create function f_ret_sysdate return varchar2
    begin
    return to_char(sysdate,'mm/dd/yyyy');
    end;
    Now, in the 'Customization Form Display Options' section of the report I'm calling this function as #f_ret_sysdate in the default value field of corresponding bind variable to display SYSDATE with the format.
    Hope this helps!...
    -Krishnamurthy

  • Ssrs parameter default value not showing ,when available values is binded to query dataset

    I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is  not showing in report preview .
    Many Thanks
    Chandra

    Hi Chandra,
    According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
    In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
    the default values.
    Reference:
    Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Passing a default value to the master block and do the auto query

    Hi
    My problem is i have a MD FORM to which i have to pass a default value and do an auto query so that when i run the form the form should open with this default value and do the query and get the details.
    I tried many things like trying to set the value of the column using p_session.set_value and then calling the same form using wwa_app_module_link by using the value in the condition but every time unless i press the query button i did not get the values.
    Now i don't know what to do.
    My portal version is 3.0.7.6.2
    Some body please help me
    thanks
    Sreedhar

    I don't think this works for 3 parameters, but I know it will work for 1. Maybe you can do something with it.
    1. Create a link to the destination component (YourProvider.YourLink)
    2. Use the code below to use that link to pass the value of a form field to the destination component. 'FieldName' is the field on the destination component you want to query, and '_FieldName_cond' is the condition. This creates the destination URL.
    3. wwa_app_module.set_target(l_url) will send you to the URL you generated.
    l_url := PORTAL.wwv_user_utilities.get_url('YourProvider.YourLink', 'FieldName', v_YourParameterValue, '_FieldName_cond', '=');
    portal.wwa_app_module.set_target(l_url);
    I'm not the best at this, but this works for me in most cases.

  • BI 7.0 Order of Query front end default value fields

    Hello,
    I have a ordered the default values in query designer, but when I display the query in bex web analyzer, the order of the dimension variables is not in the same order as I specified in query designer.  It does not appear to be alphanumeric or even based ont the technical name.   How can I control the order of the default values?
    Thanks for any information
    Lee Lewis

    Simply go to the query properties and here you can re-order the charachteristics

  • Setting default value read from user session, for an LOV in Query component

    I want to set the default value of a field in VO that participates in a named view criteria and thereby in Query component. That field is configured with an LOV by mean of a view accessor. The values are Y and N and the corresponding display strings obtained from view accessor are true and false respectively.
    I am able to set the default value by setting the value of the criteria item corresponding to that field in view criteria. I am setting the value as either Y or N and I am able to corresponding display string as per the view accessor, on the query component when it is rendered.
    I want to read the defauilt value from the ADF BC user session and set it as default value. I tried setting the values as "adf.userSession.userData.usageFlag". Iam ensuring that the attribute usageFlag is set before the view activity that has the query component is invoked. But this is ending up showing no default value in the Query component when rendered.
    Can any one let me know how to go about with this?

    I made up your table since you didn't provide some example, but I'm sure this will give you the picture:
    SQL> var run_type varchar2(1)
    SQL> exec :run_type := 'A'
    PL/SQL procedure successfully completed.
    SQL> create table my_cycles as select level cycle_id
      2                            ,      level cycle_status
      3                            from   dual connect by level <= 5;
    Table created.
    SQL> select cycle_id
      2  from   my_cycles
      3  where  case
      4           when :run_type = 'D' and cycle_status  = 1 then 1
      5           when :run_type != 'D' and cycle_status  in ( 2, 3 ) then 1
      6         end = 1;
      CYCLE_ID
             2
             3
    2 rows selected.
    SQL> exec :run_type := 'D';
    PL/SQL procedure successfully completed.
    SQL> /
      CYCLE_ID
             1
    1 row selected.
    SQL>

  • How-To populate SELECT LIST default value from SQL Query

    OK, I've done my homework, and did not find my answer in the Forum, so here it is.
    I have a Page that displays fields from a SQL Query. The Page also has below that radiogroups, checkboxes, and Select Lists to allow the user to change values in the fields that are displayed at the top of the Region. I am able to pre-populate the radiogroups and checkboxes by performing a SELECT in the 'Source value or expression' of the Source area of the Page Item.
    However, I am unable to do the same for the Select List fields. Their default value ends up being the first value in the LOV ('-- None --' for NULL values). Source Used: Only when current value in session state is null. Source Type: SQL Query. Also, when I first go into the Page when running it, and check the Session State values, they are all null, so I don't understand why the field is not populated by the SQL Query statement as the radiogroups and checkboxes are.
    Any suggestions??? I've tried all sorts of combinations.

    Thank you for the suggestion.
    I had considered that, but cannot do so, because we are using Oracle Application Express more for development than for data containment.
    We have all our data in an Oracle 10.g DB which is separate from the OAEX server, and the OAEX app will reference that data via VIEWs and DB LINKs. We are doing so primarily as an added data security layer, where the data is housed separate from the app, in case the Web site is ever compromised. The data that can be viewed is restricted to a subset of the actual data that is available.
    Since the data is on a separate server, (I assume) we will not be able to set the source type to Database column, because (I asume) that is dependent upon the data being housed by the OAEX server.
    That still leaves me with having to populate the field with a SELECT statement from the Oracle DB. This unfortuneately is almost a show-stopper for me because of down-stream processing data requirements. Have not been able to come up with contingencies yet.

  • How can I use today's date as default value in query string filter web part in SharePoint

    I have a query string filter on my web part page. I am trying to figure out how I can set it's default value to Today? I can't find anything online...

    Hi,
    Per my understanding, you might want to set a default value to the Query String Filter Web Part.
    It would not be able to set default value to the Query String Filter Web Part with the OOTB features available.
    By default, with a Query String Filter Web Part in the current page, we can filter other web part in the same page by adding parameters and values in the address bar
    of browser.
    If setting the “Query String Parameter Name” of a Query String Filter Web Part as “t”, then we can filter the corresponding connected web part by inputting such an
    URL into the address bar:
    http://sharepoint/SitePages/Page1.aspx?t=value1
    Suppose you want to filter the list view with a value dynamically when user opens this page, as a workaround, we can generate an URL with the parameters needed when
    page loaded, then redirect user to this URL afterwards. This can be achieved using JavaScript.
    About how to redirect user to other page with an URL:
    http://www.tizag.com/javascriptT/javascriptredirect.php
    How to get today’s date using JavaScript:
    http://www.w3schools.com/js/js_dates.asp
    Best regards      
    Patrick Liang
    TechNet Community Support

  • Query mode & default values

    Hi,
    When a block is put into QUERY MODE all the
    fields in it are blanked.
    I am looking for a way to put in default
    values in some of my fields when in
    query mode.
    Is this possible.
    Any help is appreciated.
    Regards,
    Klas Malmstrom
    [email protected]

    You could try the When-New-Record-Instance trigger for the block and assign values to items when the :SYSTEM.MODE = 'ENTER-QUERY'. Users may be able to change these default values.
    To have hidden default values use the default where property of the block and either set on the property sheet or dynamically in the PRE-QUERY trigger; or assign values to database items in the PRE-QUERY trigger.

Maybe you are looking for