SQL Advisor with SQL_ID
Hi All,
I want to use SQL Advisor for SQL performance tuning. Here I don't want to create SQL and pass it to DBMS_SQLTUNE.create_tuning_task. I want to pass SQL_ID in this. So whenever I ran my SQL, I want to capture its SQL_ID. How can we get this. I used gv$sql, but it is not showing me my SQL.
Regards,
Danish
Edited by: dbdan on Aug 7, 2009 9:42 AM
changed view to use
Hi Anantha,
Is it not possible to RUN any SQL --> Get its SQL_ID --> Pass it to SQL Advisor? Without creating snapshots or tuning sets.
regards,
Danish
Edited by: dbdan on Aug 10, 2009 12:20 AM
Similar Messages
-
How to Run SQL Tuning Advisor on the SQL statement with SQL_ID?
Can you give the steps to run the SQL tuning advisor on the SQL statement with SQL_ID?
Database version: 10g Release 2Hi,
You can use either the automatic SQL tuning features that are accessible from Enterprise Manager Database Console on the "Advisor Central" page or trough SQL*PLUS using the DBMS_SQLTUNE pakage:
-- creating the tuning task
set serveroutput on
declare
l_sql_tune_task_id varchar2(100);
begin
l_sql_tune_task_id := dbms_sqltune.create_tuning_task (
sql_id => '<your_sql_id>',
scope => dbms_sqltune.scope_comprehensive,
time_limit => 60,
task_name => '<your_tuning_task_name>',
description => 'tuning task for statement your_sql_id.');
dbms_output.put_line('l_sql_tune_task_id: ' || l_sql_tune_task_id);
end;
-- executing the tuning task
exec dbms_sqltune.execute_tuning_task(task_name => '<your_tuning_task_name>');
-- displaying the recommendations
set long 100000;
set longchunksize 1000
set pagesize 10000
set linesize 100
select dbms_sqltune.report_tuning_task('<your_tuning_task_name>') as recommendations from dual;For more information, take a look at link provided by Jaffy.
Cheers
Legatti -
Tune the PL/SQL block with SQL_ID
Hi There,
I have found some recommendation in ADDM report as follows.
"" Action
Tune the PL/SQL block with SQL_ID "48trcns4mx5bk". Refer to the "Tuning
PL/SQL Applications" chapter of Oracle's "PL/SQL User's Guide and
Reference".
Related Object ""
can any one let me how to Tune the PL/SQL block with SQL_ID?
looking forward.
Db: 11.1.0.7
OS: OracleLinux5-86*64
Regards,
MohsinHi,
you can't tune a PL/SQL block directly. Instead, you'll need to profile it first (i.e. see how much time SQL statements inside it consume) using dbms_profiler or some other tool. If you find that the problem is that some SQL is called too frequently because of flawed PL/SQL logic, then you'll need to address that. Otherwise, you'll need to take the top time consuming statement(s) and tune it (them).
Best regards,
Nikolay -
Hi,
Can you please let me know purpose or usage of sql advisor in oracle 10g.While select the particular task its showing the below error
- ORA-01006: bind variable does not exist
some times its showing
ORA-00972: identifier is too longDird wrote:
Hi riedelme,
The too many values was strange, it seems that Oracle doesn't take the most recent version of a profile but instead returns them all. I executed the same thing 2 times at first & that must be the reason for the error. I used the drop profile command & re-ran them once & the profile could be accepted.
My issue now with the query is it's built around a specified value e.g.
FROM t1, t2
WHERE t1.col = t2.col and t1.col = 'JIM'Now if I do it with the value 'PAUL' it ignores the profile. Since the profiles are declared in PL/SQL can I just replace 'JIM' with :name and would that work with = 'JIM' or 'PAUL'? Or would I have to use bind variables then? :x
I used the table name instead of alias for USE_NL()...I'll try again with the alias tomorrow.
Do you know the tables the new query is kept in related to an Oracle profile? Or does Oracle not publish this? If I can't use a placeholder like :name then I'd like to manually use the hints without the profiler instead～Sorry for a late reply. I was off last week :)
If you change a hard-coded value and the plan changes the most likely reason is that the optimizer is using histograms and is deciding that an index would help with one value but not another (skewed data). Using bind variables makes this less certain depending on your version but in 11g may not make a difference. Also possible is a phenemenon known as "bind peeking" (theoretically fixed in 11g) which re-uses an execution plan under less-than-perfect circumstances.
It is hard to tell what the profiler does behind the scenes. Using hints is more work but probably offers better control although under the right circumstances a profile might offer better results -
Hi ,
I have installed the Oracle RDBMS 10g and Enterprise Manager as well.....
I try to run the SQL Access Advisor as user SYS but it constantly fails...
The error messages are as follows.....
ORA-13605: Task or Object SQLACCESS8165579 does not exist...
Details ORA-06512: in "SYS.PRVT_ADVISOR", line 2676 , ORA-06512: in "SYS.DBMS_ADVISOR line 247 , ORA-06512: line23 does not exist for the current user....
So , do i have to run the SQL Access Advisor with another user or should I first grant some specific-in this situation which are- privileges to user SYS...????
Regards,
SimonSomething else....
I have noticed in the the Job Scheduler window that the following pl/sql block has been executed....
DECLARE
taskname varchar2(30);
task_desc varchar2(256);
task_or_template varchar2(30);
task_id number;
wkld_name varchar2(30);
saved_rows number;
failed_rows number;
num_found number;
BEGIN
task_id := 0;
saved_rows := 0;
failed_rows := 0;
taskname := 'SQLACCESS6026890';
task_desc := 'SQL Access Advisor';
task_or_template := 'null';
wkld_name := 'SQLACCESS6026890_wkld';
/* Create Task */
dbms_advisor.create_task(DBMS_ADVISOR.SQLACCESS_ADVISOR,task_id,taskname,task_desc,task_or_template);
/* Reset Task */
dbms_advisor.reset_task(taskname);
/* Create Workload */
select count(*) into num_found from user_advisor_sqlw_sum where workload_name = wkld_name;
IF num_found = 0 THEN
dbms_advisor.create_sqlwkld(wkld_name,null);
END IF;
/* Reset Workload */
dbms_advisor.reset_sqlwkld(wkld_name);
/* Link Workload to Task */
select count(*) into num_found from user_advisor_sqla_wk_map where task_name = taskname and workload_name = wkld_name;
IF num_found = 0 THEN
dbms_advisor.add_sqlwkld_ref(taskname,wkld_name);
END IF;
/* Set Workload Parameters */
dbms_advisor.set_sqlwkld_parameter(wkld_name,'ACTION_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'MODULE_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'SQL_LIMIT',DBMS_ADVISOR.ADVISOR_UNLIMITED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'ORDER_LIST','PRIORITY,OPTIMIZER_COST');
dbms_advisor.set_sqlwkld_parameter(wkld_name,'USERNAME_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'VALID_TABLE_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'INVALID_TABLE_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'INVALID_ACTION_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'INVALID_USERNAME_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'INVALID_MODULE_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'VALID_SQLSTRING_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'INVALID_SQLSTRING_LIST',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_sqlwkld_parameter(wkld_name,'JOURNALING','9');
dbms_advisor.set_sqlwkld_parameter(wkld_name,'DAYS_TO_EXPIRE','30');
dbms_advisor.import_sqlwkld_sqlcache(wkld_name,'REPLACE',2,saved_rows,failed_rows);
/* Set Task Parameters */
dbms_advisor.set_task_parameter(taskname,'EXECUTION_TYPE','FULL');
dbms_advisor.set_task_parameter(taskname,'MODE','COMPREHENSIVE');
dbms_advisor.set_task_parameter(taskname,'STORAGE_CHANGE',DBMS_ADVISOR.ADVISOR_UNLIMITED);
dbms_advisor.set_task_parameter(taskname,'DML_VOLATILITY','TRUE');
dbms_advisor.set_task_parameter(taskname,'ORDER_LIST','PRIORITY,OPTIMIZER_COST');
dbms_advisor.set_task_parameter(taskname,'WORKLOAD_SCOPE','FULL');
dbms_advisor.set_task_parameter(taskname,'DEF_INDEX_TABLESPACE',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_task_parameter(taskname,'DEF_INDEX_OWNER',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_task_parameter(taskname,'DEF_MVIEW_TABLESPACE',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_task_parameter(taskname,'DEF_MVIEW_OWNER',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_task_parameter(taskname,'DEF_MVLOG_TABLESPACE',DBMS_ADVISOR.ADVISOR_UNUSED);
dbms_advisor.set_task_parameter(taskname,'CREATION_COST','TRUE');
dbms_advisor.set_task_parameter(taskname,'EVALUATION_ONLY','FALSE');
dbms_advisor.set_task_parameter(taskname,'JOURNALING','9');
dbms_advisor.set_task_parameter(taskname,'DAYS_TO_EXPIRE','30');
/* Execute Task */
dbms_advisor.execute_task(taskname);
END;In the above , the create task command is under comments.....
But if i uncomment this , and execute it in SQL*PLUS as user SYS , then I get the following errors...
ORA-13600:error encountered in Advisor string
ORA-13635:The value provided for parameter string cannot be converted to a number. The parameter string is "ADJUSTED_SCALEUP_GREEN_THRESH"
ORA-06512: in "SYS.PRVT_ADVISOR", line 3902
ORA-06512: in "SYS.DBMS_ADVISOR", line 102
ORA-06512: in line 21
Whowwww!!!
What can I get rid of these errors?????
Thanks , a lot for time and interest!!!
Simon -
Can't update a sql-table with a space
Hello,
In a transaktion I'm getting some Values from a SAP-ERP System via JCO.
I update a sql-table with this values with a sql-query command.
But sometimes the values I get from SAP-ERP are empty (space) and I'm not able to update the sql-table because of a null-value exception. (The column doesn't allow null-values). It seems that MII thinks null and space are the same.
I tried to something like this when passing the value to the sql-query parameter but it didn't work:
stringif( Repeater_Result.Output{/item/SCHGT} == "X", "X", " ")
stringif( Repeater_Result.Output{/item/SCHGT} == "X", "X", " ")
this works but I don't want to have a "_"
stringif( Repeater_Result.Output{/item/SCHGT} == "X", "X", "_")
Any suggestions?
thank you.
MatthiasThe problem is Oracle doesn't know the space function. But it knows a similar function: NVL --> replaces a null value with something else. So this statement works fine for me:
update marc set
LGort = '[Param.3]',
dispo = '[Param.4]',
schgt = NVL('[Param.5]', ' '),
dismm = '[Param.6]',
sobsl = NVL('[Param.7]',' '),
fevor = '[Param.8]'
where matnr = '[Param.1]' and werks = '[Param.2]'
If Param.5 or Param.7 is null Oracle replaces it with a space in every other case it is the parameter itself.
Christian, thank you for your hint with the space function. So I remembered the NVL-function.
Regards
Matthias -
SQL query with Bind variable with slower execution plan
I have a 'normal' sql select-insert statement (not using bind variable) and it yields the following execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=7 Card=1 Bytes=148)
1 0 HASH JOIN (Cost=7 Card=1 Bytes=148)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=4 Card=1 Bytes=100)
3 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=3 Card=1)
4 1 INDEX (FAST FULL SCAN) OF 'TABLEB_IDX_003' (NON-UNIQUE)
(Cost=2 Card=135 Bytes=6480)
Statistics
0 recursive calls
18 db block gets
15558 consistent gets
47 physical reads
9896 redo size
423 bytes sent via SQL*Net to client
1095 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
I have the same query but instead running using bind variable (I test it with both oracle form and SQL*plus), it takes considerably longer with a different execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=407 Card=1 Bytes=148)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=3 Card=1 Bytes=100)
2 1 NESTED LOOPS (Cost=407 Card=1 Bytes=148)
3 2 INDEX (FAST FULL SCAN) OF TABLEB_IDX_003' (NON-UNIQUE) (Cost=2 Card=135 Bytes=6480)
4 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=2 Card=1)
Statistics
0 recursive calls
12 db block gets
3003199 consistent gets
54 physical reads
9448 redo size
423 bytes sent via SQL*Net to client
1258 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
TABLEA has around 3million record while TABLEB has 300 records. Is there anyway I can improve the speed of the sql query with bind variable? I have DBA Access to the database
Regards
IvanMany thanks for your reply.
I have run the statistic already for the both tableA and tableB as well all the indexes associated with both table (using dbms_stats, I am on 9i db ) but not the indexed columns.
for table I use:-
begin
dbms_stats.gather_table_stats(ownname=> 'IVAN', tabname=> 'TABLEA', partname=> NULL);
end;
for index I use:-
begin
dbms_stats.gather_index_stats(ownname=> 'IVAN', indname=> 'TABLEB_IDX_003', partname=> NULL);
end;
Is it possible to show me a sample of how to collect statisc for INDEX columns stats?
regards
Ivan -
SQL query with JSP and WML-parameters
Hey,
Could you help me?
I'm trying to do the following. WML deck card 1 send parameter to same WML deck's card help. I try to read the parameter with JSP in card help by putting the parameter to SQL query, but it doesn't work. I can read the parameter with WML in card help. I can also print the value of the parameter with JSP if I generate WML with JSP.
/*parameter sending from card 1 to card help*/
out.println("<go href='#helpcard'>");
out.println("<setvar name='valittukurssi' value='$(valittukurssi)'/>");
/*parameter read with WML in card help */
<p>Valitse kurssi.
$valittukurssi</p>
/'parameter read with JSP by generating WML with JSP*/
out.println("<p>$valittukurssi</p>");
/* SQL query with JSP */
ResultSet uudettulokset = uusilause.executeQuery("select * from kurssi where lyhenne='$valittukurssi'");
Thanks,
RampeYou're problem is easy to fix. You're confusing WML variables with JSP variables. See below:
>
/*parameter sending from card 1 to card help*/
out.println("<go href='#helpcard'>");
out.println("<setvar name='valittukurssi'
value='$(valittukurssi)'/>");
Above you set a var that will work on the phone, not in JSP.
/*parameter read with WML in card help */
<p>Valitse kurssi.
$valittukurssi</p>
Yes the above does display the parameter, because it is a client side WML var, but you cannot use this variable in the JSP code (that's why your SWL fails).
/'parameter read with JSP by generating WML with
JSP*/
out.println("<p>$valittukurssi</p>");Here's you're problem, the above line is EXACTLY the same as the one before it. When the container parses through this JSP code it translates the above line to:
<p>$valittukurssi</p> on the WML page and the CLIENT uses it's local variable to display it.
What you need and want is to have a variable that can be used in JSP code and output to your WML page. Here's how it's done:
out.println("<go href='#helpcard'>");
String some_name = "valittukurssi";
out.println("<setvar name='"+some_name+"'
value='$("+some_name+")'/>");
//note that you may have to escape the ( and ) with a \
//so we displayed the variable above into the WML page, now we can use it in the SQL query:
/* SQL query with JSP */
ResultSet uudettulokset =
uusilause.executeQuery("select * from kurssi where
lyhenne='"+some_name+"'");//the end of the command is: " ' " ) ;
Frank Krul
Got Node? -
How to compare result from sql query with data writen in html input tag?
how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist"); -
How to get all tables in oracle sql developer with MS SQLServer
Hi All,
I am using microsoft SQL server 2000. For displaying the tables and other stuff i am using oracle SQL developer tool. The problem is when i connect to sql developer with oracle database i can see all the tables in that database. But when i connect to MS SQL server database it is not showing all the tables in that database. I don't know why?.
i tried doing the samething using another tool called Aqua Data Studio , there i can able to see all the tables in microsoft SQL server 2000.
do you have any knowledge regarding this, why i am not getting all the tables in oracle sql developer when i connect to microsoft SQL server 2000.Same issue here. Haven't found the answer yet..
-
I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR -
Problems in SQL transform with variable in statement
Hi,
I have an sql transform with a variable in the statement. It looks like this:
SELECT * FROM I.X where I.X.CUSTOMERNUMBER IN ([$variable])
I have a script running prior which sets the $variable = '\'366800\',\'000933\'';
(the CUSTOMERNUMBER field is a string)
The problem is when DI compiles the SQL with the variable value, it is replacing each single quote with two single quotes, and thus turning my list of values into a single string (as recognised by DB2).
How can I work around this? The CUSTOMERNUMBER field is indexed and the table is very large, so I want to use a very efficient statement to retrieve the data. I'm inserting this data into a different database, so I can't use the sql() function to execute the query and insert the rows into a new table in the same database (don't have authority to do that).
I also need the sql to be dynamic because the customer numbers required will change from time to time. They're listed in another database and I plan on writing a loop to set the $variable value to contain all values in the lookup table, but I can't use that in a join because its in a different database and would not be efficient.
Does anyone have any ideas? I'm literally all out, have tried a wide range of things to no avail, and none of my colleagues can work it out either.
Thanks very much,
-SteveI assume the SQL Transform is used only because of that in-list, not for other reasons....
In this book page here: https://boc.sdn.sap.com/node/20046 at the very bottom it isdescribed on how to use the pushdown_sql() function in a where clause to add *any* text of your choice into the select statement DI generates. In this example I used a "where exists" but you can easily change the text to
where key=5 and pushdown_sql('my_datastore', 'CUSTOMERNUMBER IN ([$variable])') and gender='M'
I used the key=5 and gender=M just to clarify the syntax (I hope).
For the SQL Transform, I wonder if you need the [$variable] syntax as well.... -
Unable Update SQL Developer with Times Ten in-Memory DB Extension 1.2.1.1.0
SQL Developer 1.2.1 Build MAIN 32.13 (Windows XP)
We can't Update SQL Developer with Times Ten in-Memory DB Extension 1.2.1.1.0 :-((
We did the same actions as described in tutorial
http://www.oracle.com/technology/products/timesten/viewlets/tt703_sqldev_install_ext_viewlet_swf.html
In addition to tutorial we have "Log In" window
"To download Oracle Times Ten in-Memory Database Extension
you must enter your Oracle Web Account user name and password"
This window was not displayed in tutorial...
We try to use three our OTN accounts and the result
was the same - we was asked with "User name" and "Password"
again, again, again and again,,, :-(
Is it a bug or a feature?
Mayby we didn't understand something or did something wrong?Hi Simon,
I found cause of update failure! It was the HTTP proxy setting.
I turned off "Use HTTP proxy server" checkbox in SQL Developer -> Tools -> Preferences -> Web Browser and Proxy.
After this action SQL Developer was successfully updated with Times Ten Extension.
Valery Yourinsky -
Execute SQL Task with Parameter - from DB2 to SQL Server
I am pulling data from DB2 to SQL Server.
1st Execute SQL task runs the following against DB2:
SELECT TIMESTAMP(CHAR(CURRENT_DATE - (DAY(CURRENT_DATE)-1) DAYS - 1 MONTH)) as START_MONTH
FROM SYSIBM.SYSDUMMY1;
I'm storing it as a Result Set.
Next I have a Data Flow Task. This pulls data from DB2 where the date matches the parameter.
FROM SCHEMA.TABLE t
WHERE DATE_TIME_COLUMN= ?
This works fine. Guessing, because the parameter source is DB2 and the Data Flow source is DB2.
The problem is, I want to remove existing data for the same date in the SQL table. IE, if I'm pulling March 2014 data from DB2, I want to be sure there is no March 2014 data in the SQL table. The main use is for re-runs.
So, I added another Execute SQL task after the first one that assigns the variable, and before the Data Flow Task. This runs the following statement against SQL Server:
DELETE FROM
database.dbo.table
WHERE DATE_TIME_FIELD >= ?
The package fails at the new Execute SQL Task with the following error message:
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "DELETE FROM
SBO.dbo.tblHE_MSP_FEE_BUCKETS
WHERE T..." failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Task failed: Execute SQL Task
SSIS package "Load_MSP_Fee_Buckets_SQL.dtsx" finished: Success.
The program '[14240] Load_MSP_Fee_Buckets_SQL.dtsx: DTS' has exited with code 0 (0x0).
I am assuming this is something to do with the Parameter source being DB2, and trying to use against SQL?
Any suggestions on how to make this work??
Thanks,
-Al HParameter name is unrecognized
is the key, how come DB2 is related if it runs against SQL Server
What I think is happening you do not use the OLEDB connection to SQL Server.
Likewise, if it is ADO then the query needs to be
DELETE FROM
database.dbo.table
WHERE DATE_TIME_FIELD >= @MyDate
Arthur My Blog -
How to define the tab space in the PL/SQL editor with Oracle Forms 4.5?
When I use the PL/SQL editor with Oracle Form Builder, I found the tab space is very long that affects my programs readability quite a lot. Then, I tried to use Textpad to type my program. It looks fine with Textpad. However, when i tried to 'cut and paste' my code back to the PL/SQL editor, all tab spaces (approx. 8-character) are detected and the program looks awful again ~~ Would any one help me to solve my mentioned problem?
Thanks for any advices!In 4.5 you cannot change this. In Forms 5.0 and above there is a registry value DE_PREFS_TABSIZE which allows you to set a value for the tabsize.
Maybe you are looking for
-
Im sorry to ask this questioon, but am new to apple. Should i as recommended by apple buy and install intigo av, and can anyone advise me on Rapport as offered by the bank free of charge. Can anyone tell me how to increase the font size of the menu b
-
.mov files from my mac won't play on windows
I created a PowerPoint CD with many .mov movies which I saved as a PowerPoint show (.pps). This powerpoint program will play on Windows but the movies will not play. Windows machine has QuickTime but Error message says I need QuickTime and H.264 deco
-
When I set up my new iMac one of the things that happened was that the iMac built in camera took a foto and used that in the set up. Is that built in camera also not for being able to connect, for example, with my children and then we can have video
-
TS4532 Bluetooth problem with iOS 6.1 - Help!
Since I updated to iOS 6.1 I can't Sync any of my bluetooth earpieces, Jawbone and Ant. Both worked fine until upgrade. Any suggestions? Thanks
-
Hi all, I have a senario where a procedure should pick the files from say 4 folders, do some validations and load into a table. But the names of the files keep changing for each and every load. Can you help how to tackle this problem. thanks and rega