SQL Commands feature in Application

Hi All,
Can i have sql commands type feature in my custom application? The requirement is users does not have access to TOAD or SQL Developer to query anything, so i want sql command type feature in my application.
If this can be done let me know ASAP.
The users wont be having access to developer tool as well.
Appreciate your response.
Regards,
Prem N

Hi Prem,
probably the easiest way to achieve this would be to give users access to Apex but only give them SQL Workshop Access as opposed to full developer access.
To build an adhoc query tool is probably re-inventing the wheel, and if not done properly can lead to serious security problems.
I'm not sure of your user requirements, but from my experience, users who ask for adhoc query ability rarely need it when you delve deeper into their requirements. First of all they usually don't have the skills to write anything more than the simplest queries so you find yourself writing a set of queries for them which they can then use. You then find yourself encapsulating these queries in a metadata layer as views and putting in as much effort as you would if you simply created a set of interactive reports, and put these in an application.
My suggestion is to look into the features of interactive reports and you may find these will give your users the flexibility they need.
Regards
Andre

Similar Messages

SQL Command problem in Application Express 3.2.0.00.27

To Oracle Application Express Development Team,
Yesterday I installed Oracle Application Express 3.2.0.00.27.
While doing my r&d, I came across one problem in SQL Command.
For example I wanted to run sql "select * from tab"
When I checked "Autocommit" checkbox it worked fine.
But when I unchecked the "Autocommit" checkbox it gave me following error:
ORA-01003: no statement parsed
Please check post
http://www.oraclebrains.com/2009/03/sql-command-problem-in-application-express-3200027/ for more details.
Cheers

I can't find the log file (a good indication that something went wrong)
Here's the transcript of the session...
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 264242572 bytes
Database Buffers 331350016 bytes
Redo Buffers 2904064 bytes
Database mounted.
Database opened.
SQL> @apxpatch.sql
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Wrote file apxset.sql
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
SQL>
SQL> @apxldimg.sql
PL/SQL procedure successfully completed.
Enter value for 1: C:\Documents and Settings\jtench\Desktop\My Downloads\Oracle\apex_3.2.1
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'C:\Documents and Settings\jtench\Desktop\My Downloads\Oracle\apex_3.2.1/apex/images'
Directory created.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:03:30.03
Directory dropped.
SQL>

How to get the active application users IP address in R12 by sql command

Hi ,
I need to know how to get the active application users IP in R12 by sql command
in order to kill any session by the IP address ?
Am working on 12.1.3 Application
And 11.2.0.3 Oracle Database
Thanks

936921 wrote:
Am still couldn't found the IP address for the connected Application users.
If there any select statement can help me with that?
Really? Then how do you explain me finding the following docs from the links I referenced above?
How To Find The IP Address Of The Client Machine From Where A Particular Forms User Is Connected ? (Doc ID 879092.1)
How to Track IP Address of the Form Session in Oracle application 11i (Doc ID 878931.1)
Where to find the Client IP Address for a Client in E-Business Suite? (Doc ID 1258415.1)
How To Get The terminal ID For The Machine From Which A User Is Logged To E-Business Suite Applications (Doc ID 751658.1)
Thanks,
Hussein

Problem adding data to the CRM /Saas application by running SQL commands

Hello,
I've been following the CRM/ Saas tutorial:
http://www.oracle.com/technology/pub/articles/bobrowski-saas.html
and I tried to run the SQL commands in the tutorial to populate the TENANTS, CUSTOMERS, TENANT_COLUMNS, and USERS tables and keep on getting an "ORA-00911: invalid character" error.
I could use the Object Browser page to do this but would like to know how to do this by running a SQL command.
Has anyone else encountered this problem when trying to populate the tables in the CRM application?
Thanks
Linda

Hello,
Are you sure you copied it correctly?
If you try to run 1 create statement, does that work?
For ex.
-- USERS
INSERT INTO users (username, tenant_id)
VALUES ('MIKE',1);
INSERT INTO users (username, tenant_id)
VALUES ('JOE',2);
COMMIT;
Does that work? I don't see that many special characters...
What you may try to do is to change the ; by a /
for ex.:
INSERT INTO users (username, tenant_id)
VALUES ('MIKE',1)
INSERT INTO users (username, tenant_id)
VALUES ('JOE',2)
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Code block works in SQL Command Processor but not in application

Hello forum,
Been struggling with this for a few days without success:
I have a form with a popup LOV called P6_POPUP, a file browse item called P6_BROWSE, a SUBMIT button, and a Process with the following code:
declare
q_image_id number;
begin
select host_family_photos_seq.nextval into q_image_id from dual;
insert into host_family_photos (image_id, file_object_id, image_name)
select q_image_id, id, filename
from htmldb_application_files where filename = :P6_BROWSE;
update host_family set image_id = q_image_id where family_name = :P6_POPUP;
end;
The Process Point is set to On Submit after Computations and Validations and When Button Pressed is set to the Submit button.
When I run the page the file is imported into HTMLDB_APPLICATION_FILES
but the insert and update do not occur.
The URL header after submitting is as follows:
http://127.0.0.1:8080/apex/f?p=115:1:480837828458787::NO:::&success_msg=Photo%20Imported%2FB87C5A54684B0DF005D09D0DFE6E98D6%2F
However if I run the above code in the APEX SQL Command window and supply the required variables it works every time - most confusing.
Not sure what to try from here.
thanks for your time,
Brett

Scott:
I always thought that the File Browse item maps to the NAME column in the view (below) and that is guaranteed to be unique. The NAME column seems to have a system-generated "F1234" id embedded in it (to guarantee uniqueness, I thought).
In other words, when we put a File Browse item on the page, submitting the page uploads the file into the HTMLDB_APPLICATION_FILES table and the way to access that record (to copy/move it into our own custom table) is by doing
from htmldb_application_files
where name = :P1_BROWSEThanks
SQL> desc htmldb_application_files
Name                                      Null?    Type
ID                                        NOT NULL NUMBER
FLOW_ID                                   NOT NULL NUMBER
NAME                                      NOT NULL VARCHAR2(90)
FILENAME                                           VARCHAR2(400)
TITLE                                              VARCHAR2(255)
MIME_TYPE                                          VARCHAR2(48)
DOC_SIZE                                           NUMBER
DAD_CHARSET                                        VARCHAR2(128)
CREATED_BY                                         VARCHAR2(255)
CREATED_ON                                         DATE
UPDATED_BY                                         VARCHAR2(255)
UPDATED_ON                                         DATE
LAST_UPDATED                                       DATE
CONTENT_TYPE                                       VARCHAR2(128)
BLOB_CONTENT                                       BLOB
LANGUAGE                                           VARCHAR2(30)
DESCRIPTION                                        VARCHAR2(4000)
FILE_TYPE                                          VARCHAR2(255)
FILE_CHARSET                                       VARCHAR2(128)

Executing a SQL Command in my bean class

Hello everyone,
I'm using JDeveloper 12.1.2.0.0.
I have an interest in executing a query in my bean method. I've done some research and i still got a code but it can't find the method that the method requires so i tried to added the query in my AppModule and i've added my method as a data control but how can i access it and modify it in my bean method?
The page with the code that doesn't find the method: http://jjzheng.blogspot.pt/2010/11/run-single-query-in-application-module.html
Which gives me: "Method 'getDBTransaction' not found"
The page that creates my method as a data control: http://amit-adf-work.blogspot.pt/2013/09/how-to-execute-sql-using-adf-application.html
Is any of this the right way? How can i execute a SQL Command in my bean class?
Regards,
Frederico.

This is the code I use
// GET A METHOD FROM PAGEDEF AND EXECUTE IT
// get the binding containe
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
// get an Action or MethodAction
OperationBinding method = bindings.getOperationBinding("YourMethodAction");
// if there are parameters to set...
Map paramsMap = method.getParamsMap();
paramsMap.put("param","value") ;
// execute the method
method.execute();
List errors = method.getErrors();
if (!errors.isEmpty())
// handle errors here errors is a list of exceptions!
// no error resume normal work
Timo

How to use Java with PL/SQL commands to send an email with attachment

Apologizes in advance if this is the wrong place to ask the question.
I need to use Java with PL/SQL commands to send an email with attachment. My java application runs from the command line and does some magic to gather info from an Oracle 11g db. If the DB has sendmail configured, I'd like to send the results of the data gathering as an attachment to the email addresses. I'm not sure how to do this. I've been reading up on on PL/SQL can send email with UTL_SMTP - with attachments. I'm just not sure how to translate that into being triggered by my Java application. Any suggestions or pointers on what I should read would be appreciated.
Background - I've been programming in Java for 10+ years, but this is my first time using databases. I also have been on these forums for a long time, but lost my profile when it was switched to Oracle.
Thanks for all help.

user13726880 wrote:
The original requirements were put together and given to me, an Oracle newbie. They expected the Java app to use something intrinsic to Oracle and Unix sendmail. To solve my problem, I use a JDBC connection to run some SQL commands. I take that data, format it and send the results by email to the user. By default the requirement is to send it as an HTML attachment using Unix 'sendmail'. So I do that using Runtime exec. I have also added JavaMail functionality as an alternative to sendmail. It works great and as expected.Sounds like a reasonable solution.
Note however that PL/SQL itself can send email. And PL/SQL can call unix sendmail too.
However myself I would have done it in java with JavaMail.

SQL Command Object

We are in the process of migrating reports from SSRS to Crystal 2011.
In SSRS we are able to paste complex SQL into reports as the data source for the report (e.g. multiple CTE's, correlated subqueries, temp tables, etc).
It appears that we can accomplish the same thing using Crystal command objects, but the reports created have to be distributed as stand-alone rpt files to customers. In that case the reports that use sql commands return an error that the command object does not exist. It seems the command object exists in the data connection (which is generated at run-time in the host application) and not in the rpt file itself.
Is it possible to somehow use an sql query as the data source in the report in a manner that is independent of the data connection?
Thanks

Hi,
That's interesting, the query shouldn't be stored in the data connection. It should be saved inside the rpt as part of the SQL Query.
How are you distributing the reports?
How is your application connecting the reports to the database?
As long as the reports logon to the tables and objects used in the SQL Command exist on the database it should run without a problem.
As a test, open the report in Crystal and go to Database | Show SQL Query. You should see your SQL Command there. Copy and paste the SQL into your production database and see if it runs.
Good luck,
Brian

Oracle sql commands use

my question is will it possible to use oracle sql commands in toad and genterate the reprot like I have below.
my second question is can I embede this oralc sql command in my apps. to have the out put I have below. I tried and got an error message. I am wondering if this is possible
SQL> -- Multiple COMPUTEs are also allowable.
SQL>
SQL> SET echo off
SQL> BREAK ON city skip1 ON start_date
SQL> COMPUTE sum max min of salary ON city
SQL> COMPUTE sum of salary ON start_date
SQL> SET verify off
SQL> SELECT id, first_name, salary, city FROM employee ORDER BY city
2 /
ID   FIRST_NAME     SALARY CITY
07   David         7897.78 New York
06   Linda         4322.78
                   4322.78 minimum
                   7897.78 maximum
                  12220.56 sum
01   Jason         1234.56 Toronto
                   1234.56 minimum
                   1234.56 maximum
                   1234.56 sum
05   Robert        2334.78 Vancouver
08   James         1232.78
03   James         6544.78
02   Alison        6661.78
04   Celia         2344.78
                   1232.78 minimum
                   6661.78 maximum
                   19118.9 sum

Hi,
All of theose SQL*Plus features can be duplicated in Oracle SQL. For example, "GROUP BY ... ROLLUP" can give you an minimum, maximum and total for each city.
You can create a view that looks exactly like the SQL*Plus output (for example, the city column with values like 'New York', NULL, '**********', and 'minimum'), if you really need to. CASE is very useful for things like this, as are some analytic functions. (E.g., ROW_NUMBER can help in telling which is the first row for each city.)
To make such a view, you may find it convenient to do a UNION of two queries:
(1) One that produces one row per employee
(2) One that produces a fixed number of rows (four, to get the results you posted) per city

Error in SQl Query - SQl Command not properly ended

Hi All
I have this SQL query that returns the following error when I run it in TOAD:
SELECT
VC.CAMPAIGN_NUMBER,VC.CAMPAIGN_TITLE,VC.CAMPAIGN_DESC,
VCV.START_DATE, VCV.END_DATE,VC.CAMPAIGN_TYPE,VC.APPLICABILITY,
VC.CAMPAIGN_PRIORITY
     FROM
     VM_CAMPAIGN_VIN VCV ,VM_CAMPAIGN VC
     WHERE
          VCV.VIN = 'US'
          AND
VCV.CAMPAIGN_NUMBER = VC.CAMPAIGN_NUMBER AND VC.COUNTRY_CODE = 'E'
          AND VC.LANGUAGE_CODE = 'L' AND VC.CAMPAIGN_TYPE = null
AND SYSDATE BETWEEN VCV.START_DATE AND VCV.END_DATE
AND SYSDATE BETWEEN VC.START_DATE AND VC.END_DATE)
A ORDER BY A.CAMPAIGN_PRIORITY DESC, A.END_DATE
The error is:
SQl Command not properly ended
Any help is highly appreciated. Thanks

Thanks a lot to everyone. It helped me run the query without any problem. Now I have another issue. This may not be the right place to post this question, I think.My apologies for that. The problem is, Weblogic posts an error as follows:
java.sql.SQLException: ORA-00923: FROM keyword not found where expected
I am wondering if this is an Java related error or an SQL related error.
Well, I am using the SQL Statement which you helped debug, and it is inside something called "XXSQLConstants.java consisting of the following SQL statement:
public static final String XX_ALL_CAMPS_SELECT = "SELECT * FROM" +
     "(SELECT vc.campaign_number, vc.campaign_title, vc.campaign_desc, vc.start_date," +
     "vc.end_date, vc.campaign_type, vc.applicability, vc.campaign_priority" +
"FROM vm_campaign vc" +
"WHERE vc.applicability = 'Y'" +
"AND vc.country_code = ? " +
"AND vc.language_code = ? " +
"AND vc.campaign_type = ? "+
"AND SYSDATE BETWEEN vc.start_date AND vc.end_date" +
"AND NOT EXISTS (" +
"SELECT 'X'" +
"FROM vm_campaign_vin vcv" +
"WHERE (vcv.vin = ? " +
"AND vcv.campaign_number = vc.campaign_number" +
"))" +
     "UNION" +
     "SELECT vc.campaign_number, vc.campaign_title, vc.campaign_desc," +
     "vcv.start_date, vcv.end_date, vc.campaign_type, vc.applicability," +
"vc.campaign_priority" +
"FROM vm_campaign_vin vcv, vm_campaign vc" +
"WHERE vcv.vin = ? " +
"AND vcv.campaign_number = vc.campaign_number" +
"AND vc.country_code = ? " +
"AND vc.language_code = ? " +
"AND vc.campaign_type IS NULL" +
"AND SYSDATE BETWEEN vcv.start_date AND vcv.end_date" +
"AND SYSDATE BETWEEN vc.start_date AND vc.end_date)";
The SQl runs fine when tested (well, it does not return any data for the rows returned, but there are no errors), but in my application server I get the following error (pointing out the same SQL code pasted above:
java.sql.SQLException: ORA-00923: FROM keyword not found where expected
Any suggestions? Thanks in advance. I appreciate all replies

JDBC: send batch of SQL commands as anonymous PL/SQL block

Hi All,
I did a little measurement to see if I can improve jdbc
applications by batching dissimilar SQL commands into one
anonymous PL/SQL block and execute it once. To my surprise, for
a batch of 5 SQL commands, it take 60% more time than execute
each of the 5 SQL commands separately.
The same JDBC code, using similar SQL text batching, running
against Sybase or MSSQL shows 60%-300% improvement.
Is there any other way to batch dynamic dissimilar SQL commands
in Oracle other than using anonymous PL/SQL block? Here is an
example of how the "text-batching" PL/SQL block looks like:
"begin insert into testtab1(col1, col2) values(1, 'row1');
insert into testtab2(col1, col2) values(100, 1);....; end;"
Thanks,
Nam Nguyen
null

If you do:
declare
l_sql varchar2(32767);
l_value varchar2(32767);
begin
select query_sql into l_sql from lov where lov_id = 100;
dbms_output.put_line(l_sql);
end;
You'll see something like that:
SELECT
l.DESCRIPTION || decode(l2.DESCRIPTION,null,'',l2.description, '-' || l2.description) || decode(a.DT,'Y',' - Distributed Training','N',null,null) as value1
FROM ACTIVITY a
,MOUNTAINEERING m
,LOV l
,LOV l2
WHERE a.JSATFA_ID = 82
AND a.SPECIFIC_ACTIVITY_LOV_ID = l.LOV_ID
AND m.ACTIVITY_ID(+) = a.ACTIVITY_ID
AND m.CLASSIFICATION_LOV_ID = l2.LOV_ID(+);
you need to duplicate the '
you can do many things like:
CTH@> select * from sqls;
C
select first_name || ' ' || last_name as value1 from employees where rownum=1
1 fila seleccionada.
CTH@>
CTH@> ;
1 declare
2 l_sql varchar2(32767);
3 l_value varchar2(32767);
4 type generic_cursor is ref cursor;
5
6 c generic_cursor;
7
8 begin
9 select replace(c, ''', ''''') into l_sql from sqls;
10
11 execute immediate l_sql into l_value;
12 dbms_output.put_line(l_value);
13* end;
CTH@> /
Ellen Abel
Procedimiento PL/SQL terminado correctamente.
CTH@>

How to pass a multiple value parameter to SQL Command?

Hi,
I created a SQL Command with parameter. But, I need the parameter to be set as multiple value. After creating the SQL Command and it's parameter under the Database Expert, I went to Field Explorer ---> Parameter Fields and found the parameter that I had created for the SQL Command. But when I wanted to edit the parameter to make it a multiple value parameter, the multiple value option was fix grayed as single parameter and I couldn't change it to multiple parameter. Is there any way that I can set a parameter that is attached to SQL Command as multiple value rather than single value? Thanks.
Cheers,
Al

Al,
That's a feature that, apparently, is only available in CR 2008. If you are using CR 2008, use this link to see how to do it.
[https://boc.sdn.sap.com/node/19268]
Cheers,
Jason

SQL Command Error on Hosted environment

An error is occurring on the oracle hosted environment. I don't believe that it is a problem with my IE, but with my company's antivirus software. Is there some setting I should ask them to do? I am unable to run sql commands on the hosted environment.
Line: 241
Char: 7
Error: Automation server can't create object
Code:0
URL:http//htmldb.oracle.com/pls/otn/f?p=4500:1001

Hi <please supply your name>,
SQL Developer Worksheet is not available from the command line.
The BRIDGE command is only supported in the Worksheet.
Its an interesting idea though. Are you trying to script data move from a non Oracle database to an Oracle database using the BRIDGE command?
The BRIDGE command was initially done to allow a simple data move from a non Oracle database to Oracle. We then build the "Copy to Oracle" feature out of it.
http://dermotoneill.blogspot.com/2010/11/cross-database-bridge-statement.html
http://dermotoneill.blogspot.com/2010/11/copy-to-oracle.html
Since the BRIDGE command references connection names, which have to be defined in UI of SQL Developer any solution to run this on the command line would have to work this out.
There are number of ways you can do this without using the BRIDGE command.
1) Perform a capture/convert of your non Oracle database and then generate the "offline" data move scripts.
Theses scripts use SQL*Loader and your non Oracle database tool (Ex: Sybase BCP).
These are run from the command line and can be modified ....
2) Use a database link from your Oracle database to your non Oracle database and reference /query the data that way.
I would interested to hear your thoughts.
Regards,
Dermot
SQL Developer Team.

Sql Exception : Sql command not properly ended

Hi,
I have the following piece of code which i am using to search into the database and display the result in my jsp page. But it is throwing this exception. This happens only when i give 2 conditions. If i try to search with only one parameter, it works fine and returns the result. But when i enable two parameters , it throws the exception.
Below is the code i have written.
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%>
<%@page import="java.sql.*"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
<%
        String queryString=null;
        String Part_Number=null;
            String Revision_Id=null;
            String Part_Desc=null;
            String Keyword_Name=null;
            String Design_Style=null;
            String Configuration_Name=null;
            String Charateristic_Name=null;
         String pN=null;
        String rI=null;
        String pD=null;
        String kN=null;
        String dS=null;
        String coN=null;
        String chN=null;
         queryString ="select * from PART";
         Connection con=null;
           Statement pst=null;
           ResultSet rs=null;
           Part_Number =request.getParameter("part_nbr");
          Revision_Id=request.getParameter("rev_id");
           Part_Desc=request.getParameter("part_desc");
           Keyword_Name=request.getParameter("keyword_name");
           Design_Style=request.getParameter("Design_style");
           Configuration_Name=request.getParameter("configuration");
           Charateristic_Name=request.getParameter("characteristic");
            pN=Part_Number.trim();
            rI=Revision_Id.trim();
            pD=Part_Desc.trim();
            kN=Keyword_Name.trim();
            dS=Design_Style.trim();
            coN=Configuration_Name.trim();
            chN=Charateristic_Name.trim();
          System.out.println("Part Number In success: "+pN);
          System.out.println("Rev Number In serchsuccess: "+rI);
          System.out.println("part desc In seachsuccess: "+pD);
          System.out.println("Keyword In sesuccess: "+kN);
          System.out.println("Design style In sesuccess: "+dS);
          System.out.println("Config In sesuccess: "+coN);
          System.out.println("charac In sesuccess: "+chN);
          System.out.println("queryString in sesuccess: "+queryString);
           if(rI!=null)
               queryString = queryString+" where REV_ID= '"+rI+"'";
           if(pD!=null)
               queryString = queryString+" where OBJ_DESC= '"+pD+"'";
           System.out.println("queryString in sesuccess: "+queryString);
          try
               DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
                System.out.println("driver manager");
            con=DriverManager.getConnection("jdbc:oracle:thin:@172.18.93.53:1521:PDMDumm", "Dumm1", "satyam");
            System.out.println("connection established");
             pst = con.createStatement();
            rs = pst.executeQuery(queryString);
            System.out.println("Query executed");
          catch(SQLException se)
            System.out.println("database error2");
            se.printStackTrace();
          catch(Exception e)
               System.out.println("error");
        if(rs!=null)
        %>
      <table>
          <tr>
            <th> PartNumber
            <th> Revision_Id
            <th> Description
            <th> Characteristic
            <th> Configuration
            <th> DesignStyle
            <th> Keyword
              <th> Planned Eff In Dte
              <th> Infos
              <th> Native File
       </table>
   <tr>
    <%
               while(rs.next())
                  %>
        <td> <%=rs.getString(1) %>
        <td> <%=rs.getString(2) %>
        <td> <%=rs.getString(3) %>
        <td> <%=rs.getString(4) %>
        <td> <%=rs.getString(5) %>
        <td> <%=rs.getString(6) %>
        <td> <%=rs.getString(7) %>
        <td> <%=rs.getString(8) %>
        <td> <%=rs.getString(9) %>
        <td> <%=rs.getString(10) %>
      <%
        %>
</body>
</html>And this is the exception i get.
Part Number In success:
Rev Number In serchsuccess:
part desc In seachsuccess: cat
Keyword In sesuccess: ----
Design style In sesuccess: ----
Config In sesuccess: ----
charac In sesuccess: ----
queryString in sesuccess: select * from PART
queryString in sesuccess: select * from PART where REV_ID= '' where OBJ_DESC= 'cat'
driver manager
connection established
database error2
java.sql.SQLException: ORA-00933: SQL command not properly ended
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java)
     at org.apache.jsp.searchsuccess_jsp._jspService(searchsuccess_jsp.java:129)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
     at SearchKdcc.doPost(SearchKdcc.java:60)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:619)

Hi drvijayy2k2 ,
Thanks for replying.
I used your code in my application and this is the problem i am facing now. The query is getting executed but its not taking the value from the database because of the Null Rev Id that is getting inputted into queryString. I have given only part_desc as the search criteria. If i just search using part description , commenting the rev_id part , i am able to retrieve the result from the database.
I have to code in a way using which i can search using either rev_id or part_desc , or using both at the same time.
Part Number In success:
Rev Number In serchsuccess:
part desc In seachsuccess: cat
Keyword In sesuccess: ----
Design style In sesuccess: ----
Config In sesuccess: ----
charac In sesuccess: ----
queryString in sesuccess: select * from PART
queryString in sesuccess: select * from PART where REV_ID= '' and OBJ_DESC= 'cat'
driver manager
connection established
Query executed

COPY command not working SQL Commands editor

Hi All,
I want to have a simple 'one-button-solution' for copying few tables from an external DB into the database where my Apex application is running.
When I issue the following from the sqlplus command line I get the following output:
SQL> COPY FROM schema/password@tnsnames_sid TO schema/password@tnsnames_sid REPLACE TABLE_TEST USING select * from TABLE_FOREIGN;
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
Table TABLE_TEST dropped.
Table TABLE_TEST created.
2 rows selected from schema@tnsnames_sid.
2 rows inserted into TABLE_TEST.
2 rows committed into TABLE_TEST at schema@tnsnames_sid.
SQL>
However, if I try exactly the same command from within the Apex 'SQL Commands' editor, I get the following error message:
ORA-00900: invalid SQL statement
NOTE that the reason I use COPY command is to overcome problems with LONG datatype which arise when doing simply CREATE TABLE AS.... with dblink.
In anycase, how can I make this work from within the 'SQL Commands' editor (and therefore in a button process).
Regards,
Pawel.

Hi Harman,
yes, this is a known issue.
It's fixed with NW04 SPS 13.
Regards Matthias Röbig-Landau

SQL Commands feature in Application

Similar Messages

Maybe you are looking for