Sql developer 1.5.4 can't connect to SQL Server: "SSPI library not loaded"

Hi,
as Dana N. pointed out in her thread (Re: How do I make a connection to SQL Server Express using SQL Developer 1.5.3? I get the same error:
error: Status: Failure test failed I/O error: SSO failed: Native SSPI library not loaded. Check the java.library.path system property
But ... I'm on sql developer 1.5.4.59.40 and tried with both the jtds from the download via "Help -> Check for updates" and the jtds-1.2.2-dist.zip from sourceforge. Both times I configured the 3rd-party-driver in "Tools -> Preferences -> Database -> Third Party JDBC Drivers" as described in http://www.oracle.com/technology/oramag/oracle/08-may/o38sql.html.
The error above remains.
Can someone please give a hint on "java.library.path system property"?
Where can you find it?
Regards,
Frank.

Hi Frank
This message means that the driver code is unable to locate a DLL to load up and use. Looking at the message I suspect that the DLL in question <jtds-dist>\SSO\ntlmauth.dll .
There are a couple of ways of making the Java VM locate the DLL, assuming you are using windows then the easiest would be to add the directory <jtds-dist>\SSO to you path environment (replacing <jtds-dist> with the actual path to your JTDS distribution).
Regards
Rob Cooper

Similar Messages

Can't connect to MSSQL server from Linux

I'm running CentOS 7. I installed the Microsoft ODBC Driver 11 for SQL Server on Linux. I also installed the unixODBC package and dependencies. I can ping the SQL Server. I can telnet to the SQL server on port 1433. My config files read:
/etc/odbcinst.ini
[ODBC Driver 11 for SQL Server]
Description=Microsoft ODBC Driver 11 for SQL Server
Driver=/opt/microsoft/msodbcsql/lib64/libsmodbcsql-11-0.so.2270.0
Threading=1
UsageCount=1
/etc/odbc.ini
[baew-cms01]
Driver="ODBC Driver 11 for SQL Server"
Server=tcp:172.21.24.29,1433
Database=smnswr_certmgmt
~/.odbc.ini
[MSSQLTest]
Driver=ODBC Driver 11 for SQL Server
Server=tcp:baew-cms01,1433
[baew-cms01]
Driver="ODBC Driver 11 for SQL Server"
Server=tcp:172.21.24.29,1433
Database=smnsvr_certmgmt
When I run "sqlcmd -U <user> -S baew-cms01,1433" (substituting user name) I get a password prompt, then I get:
1>
So I assume I'm connected, but I'm not sure. However, when I run "isql -v baew-cms01 <user> <password>" again substituting user and password, I get:
[IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified
[ISQL]ERROR: Could not SQLConnect
Can anyone help me determine why I can't isql to the server?
Thanks,
Jack

I get a password prompt, then I get:
1>
So I assume I'm connected, but I'm not sure. However, when I run "isql -v baew-cms01 <user> <password>" again substituting user and password, I get:
Hello Jack,
Yes, when you get such a "1>" prompt, then you are connected to SQL Server.
Please note, isql is deprecated, better use SqlCmd. But if you want to use iSql, then you have to use the -S Parameter for the Server Name, not -v. See isql Utility for all
Parameters.
Olaf Helper
[ Blog] [ Xing] [ MVP]

TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W.

Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
or what's the problem,
Mahmoud Sabry IT System Engineer

this issue maybe will be fix by latest version, we still waiting for it
maybe your issue can be fix using this methods
https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
http://shawn.meunier.com/?p=1#comment-43

Error: Can't connect to auth server at /var/run/dovecot/auth-master: No su

Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory
error showing up, there is no auth-master file in /var/run/dovecot
this has just happnened over night
any ideas how to re-install dovecot
google search goes on about linux but barely any info about max osx server

auth-master is created when you start the mail service. Deleted if you stop the mail service. If that is not happening, you may have to re-install mail. Dovecot is the IMAP/POP part of the mail service. I am not sure what happens if you disable IMAP. I am guessing it is not there. But that is the extent of any tips I can offer. I suppose you could reinstall, but that seems a bit extreme to me.

My ipod touch connects to wifi but can't connect to the server.

Ok, so my ipod youch says it's connected to the wifi but when i try to get on the internet it says it can't connect to the server. I've looked and there's alot of answers but they're all soooooooooooooo complicated. I'm like 14, so whoever can answer this, please use small words.
I've noticed in alot of the answers they talk about your IP adress, if it's any consilation mine starts with 169. No matter where I go, if it's at home, or at starbucks or a hotel.
Thanks for your time

Have you tried restoring your iPod touch in iTunes?
You may just be trying to connect to "Printer Networks" that allow a company/residence to print something from their printer wirelessly, it would appear on your iPod touch just about the same as any other network, but you wouldn't be able to use internet while connected to that network...
If you are talking about "free wifi" in a Cafe, like Starbucks, you will usually need to open Safari. A Page will load and tell you how to connect to their internet, whether it's by paying, or just agreeing to their terms...
Like, I said, if that isn't the problem, try restoring your iPod touch in iTunes...
-Messymeese
Über Enbonpoint Pangolins FTW!

Lync 2010 Mobile client can't connect to the server. it may be busy or temporarily unavailable

I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
unavailable"
PS I tried a lot of solutions from different articles, but the same result.
presented below my environment:
Two Lync 2010 frontend servers with one pool.
Two edges server.
HW load balancer.
Log from Lync connectivity analyzer.
User Name: [email protected]
Logging test parameters:
SIP Uri: [email protected]
Discovery Type: Automatic Discovery
Network access: NetworkAccessExternal
Selected client: ApplicationLyncMobile2010
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
Sending HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for unsecure (HTTP) internal channel
Sending HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured internal channel against
http://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for secure (HTTPS) external channel
Sending HTTP request to
https://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured external channel against
https://lyncdiscover.xxx.com/
Starting automatic discovery for unsecure (HTTP) external channel
Sending HTTP request to
http://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
   at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
   --- End of inner exception stack trace ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured external channel against
http://lyncdiscover.xxx.com/
None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
Automatic discovery of the Lync server failed. Please verify the server requirements at
http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.

Hi
Is that Port 443 opened? check the fire wall.
is that external Lync clients are logging in with out any issues.
by seeing the Log it is unable to connect on port 443
Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting the Mobility issues follows this
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Safari Not Loading Web Pages (Safari can't connect to the server)

I'm seeing increasing problems with Safari being unable to connect to websites. When the problem starts to manifest itself you see the error:
Safari can't connect to the server.
Safari can't open the page.
Then you see the URL information. It is always seems to be sites that are trying to load HTTPS pages.
Clearing the cache and resetting Safari will make it go away temporarily, but it always comes back.
Note that when this happens you might happen to see something like this in the address bar:
file:///Applications/Safari.app/Contents/Resources/

I'm having the same problem, I can open safari but when I try to go to a website it just says "server stopped responding." I just updated to the new version and that's when it started happening, it was working find before the update. Any suggestions???

*URGENT* How can i get a website to load instead of saying "Can't connect to the server"

My computer is not loading a website. This is urgent for university work!! My computer keeps saying: "Can't connect to the server" no matter what internet browser i use, and other people with Mac's can use it fine! I need it for university work. PLEASE HELP ME!!

Power off the router. Unplug it from the wall. Wait few minutes.
Plug it back in. Power on the router.
Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Deselect Proxies if selected.
Safari > Preferences > Advanced > Proxies:
Click "Change Settings" button
The network preferences window for Proxies will will show up with "Proxies"
tab selected.
Under "Select Protocol", uncheck any box if selected.
Click "OK", then "Apply"

Hello.....after updating to Yosemite, i can't get my exchange mail to work. It keeps saying can't connect to exchange server and asks for my password. My mail is still working fine on android phone and ipad2. Can someone help?

Hello....after updating to Yosemite my mail isn't working . Keeps saying can't connect to exchange server and asking for password

I am having this exact same problem with my gmail account. Hopefully someone will have a remedy.

A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can't connect to the server.I uninstalled and installed Firefox but it isn't working.

A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can’t connect to the server.I uninstalled and installed Firefox but it isn’t working.

See this thread for potential ways of removing Searchqu from your system: https://support.mozilla.com/en-US/questions/790833

I keep getting a message pop up the first time I open Photoshop CC for the day, "we sorry, we can't connect to adobe server at this time...I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can

I keep getting a message pop up the first time I open Photoshop CC for the day, "we sorry, we can't connect to adobe server at this time...I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can be done?

Moving this discussion to the Creative Cloud Download & Install forum.
R.O.B. please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error between the computer and our activation server.

Problem with Safari **Safari can't connect to the server**

My internet is working fine, but I keep having to refresh the page because I'm always getting "safari can't connect to the server". Same thing happens with different browsers. I've read a couple things online and unistalled everything that I think is causing the problem but it's still happening frequently. Any help would be greatly appreciated!

Most school networks are closed networks. You can access their Intranet, with all the files and peripherals and everything, but you need to have a specific password or IP address to access any outside connection. I have an ibook G4 that's 3 years old. I used it in high-school to access AOL wirelessly. That was before closed and protected networks were prefered. It shouldn't matter if the school intranet is widows based or not. You need to access your own internet service sometimes in order to get any reaction. If you simply use safari, you might only be connecting to the schools intranet, which only links together the schools computers and keeps the system isolated. Also, you need to check your firewall settings, in fact, just turn off the firewall. The schools sytem is firewalled up the bum and you shouldn't get attacks anyway because you're running the mac os.
You might also try an alternative approach. Go into a computer lab, access one of the systems, then go to control panels and look up every connection you can find. Take down all of the info and then see which matches up with similar info on your mac. Then go to another pc and look up the same info again. Is it different? How? Then take that listing to the system administrator and show them. They may not know that a mac has a simpler interface than the pc, so you may have to do some prodding to get them to take a look. If they still tell you it wont work, you could try boot-camp or a virtualizer (to let you run windows alongside the mac os). If you use a virtualizer, you can get your own copy of windows and then share it's connection to the main system to the mac.

Can"t connect to update server

I'm having the same issue. I would like to update my atv to the latest software version. I connect it to my mac mini running 10.7.3 and everything seems fine till it tries to verify update with apple. I get the message can't connect to apple update server. I imagine there is a communication error between my mac and apple servers? Any help wouold be appreciated. Thanks in advance

Beautiful! wrote:
Can"t connect to update server
Can't help unless you provide details

Can't connect to Application server

Hello.
i have installed sccm 2012 r2 with Application catalog web service and website roles. Status of all roles is "Ok".
But when i try to open http://ap-server/cmapplicationcatalog/, i get error "Can't connect to Application server"
What is the problem? Thanks.

If you have IPV6 enabled on SCCM server then disable it.
Few similar threads:-
http://social.technet.microsoft.com/Forums/en-US/267352b5-01d2-4c8e-b40b-0a7ab669b65b/application-catalog-cannot-connect-to-the-application-server-error?forum=configmanagerapps
http://social.technet.microsoft.com/Forums/en-US/e741b7db-26f1-45af-b074-77f420476267/application-catalog-cannot-connect-server-error-due-to-fqdn?forum=configmanagerapps
Prajwal Desai, http://prajwaldesai.com

Sql developer 1.5.4 can't connect to SQL Server: "SSPI library not loaded"

Similar Messages

Maybe you are looking for