SQL Developer 3.x won't horizontal slide with 2 fingers

My SQL Developer 2.x allowed sliding left & right via 2-fingers. e.g. When looking at a large number of columns (data) in a table.
SQL Developer 3.x doesn't seem to have a way to enable this - or it doesn't work?
Is there a workaround or a way to get this working?

Bryan,
I made an Early Access release (not an official release) yesterday to make GeoRaptor available to someone in Europe who identified a bug that only shows itself if you try to change the zoom/pan percentage in preferences.
The bug is caused because I used String.format() in the code and the format string that is supplied (stored as a preference) contains a % symbol on its own which String.format() interprets as a format token and tries to associate the percentage value with it rather than the actual parameter. The bug release contains a changed preference string (the % is "escaped" to be %%). Trivial really. We don't have enough testers.
I have not heard that the fix worked (though it worked in my testing).
There was also a minor change to the way GeoRaptor's Java code accesses the database connection associated with a result set generated by an ad-hoc SQL statement or table grid as occasionally GeoRaptor lost the connection. I am hoping for some testing of these two things before pushing for a bug fix release to the current one in the public domain.
No other work has been commenced on the next release of GeoRaptor as I am writing a book and I have had little communications from any GeoRaptor user about what they would like in a release.
regards
Simon

Similar Messages

Horizontal Slider with dates

Hi All,
I wanted a horizontal slider with dates .
Can anybody help please.
Thanks

Hello,
Thanks, now I am getting some where. I have found the "ActSlider" and the "KeyFocus" property. I have discovered how the "Key Focus" property works, if you use the tab key to cycle thru all of the stuff on your front panel, it will eventually come into focus and the "Key Focus" property will go true. Unfortunately the operation of the horizontal slider control if done with the mouse, so using that property will not help me.
The help for the "Active Slider" says that it shows which slider/needle is active, well that does not help me.
I am using a horizontal slider control to for 2 functions on the front panel, they are:
Indicate the current test step ( a number from 1 to 1000, poistion gets updated after each step is completed)
Allow the user to select the desired test step
I would like to have the user drag the slider to where they want to go and when they release the right mouse key I can go directly to where they want to be at. How if they want to jump 20 steps forward or backs I get 20 changes. If I just click on the slider bar (not the slider itself) I can go directly to where I want to be. So how can I make this work by having the user drag the slider and go directly to where they want to be?
Regards,
Kaspar

Is SQL Developer 1.5.1.54.40 compatible with older versions of Oracle DB?

I have SQL Developer 1.2.1 on one machine (this has Oracle installed on the PC) and SQL Developer 1.5.1.54.40 on another (this does not have Oracle installed on it)
I have set the same 3 database environments on both versions using Basic connection. They have exactly the same Host IP addresses and Port numbers and service names. I am using the same logins and passwords on the PCs.
When I test these 3 connections on the PC with 1.2.1, the test is successful
When I test on the PC with 1.51, the test succeeds with one of the connections which is on Oracle 9i, and fails on the remaining 2 connections which are on Oracle 8i=The Failure message I get is: "+*Failure: Test Failed. Unsupported Oracle Database Version*+"

Unfortunately for your 8i DBs, there is a note in the [release notes|http://www.oracle.com/technology/products/database/sql_developer/files/relnotes_v151.html] that says:
The JDBC drivers shipped are 11g R1. This means that users will no longer be able to connect to an Oracle 8.1.7 database.
theFurryOne

SQL Developer tool sometimes does not display data with date type

run the following query using the sql developer tool -
select effective_date from table1 where id = 123;
(the effective_date is stored in the database as date.)
one record is returned with no date in the filed.
However, if I change the query to
select to_char(effective_date, 'mm/dd/yyyy') from table1 where id = 123;
one record is returned with effective date.
Why?
Thanks for your help.

First off, there is a dedicated SQL Developer forum where lots of the developers hang out. Those folks are way more knowledgable that we are about the tool.
That said, I have no problem displaying dates. Do you just have a problem with this particular query/ field/ table? Or does it affect all dates? What version of SQL Developer are you using? 1.1 is out now.
Justin

SQL Developer 4.0 EA2 -- Cannot use OpenLDAP with LDAP connect option

Hi,
I've got OpenLDAP setup to work with my Oracle clients, to serve up TNS connect strings, in lieu of having tnsnames.ora files scattered about hundreds of servers.
This is working fine with 10g/11g, both full and instant clients, no problem.
Now, I'm trying to configure SQL Developer 4.0 EA2 working with it, as well.
When I attempt to do so, I'm able to select the "LDAP" option in "Connection Type", and the "LDAP Server" drop down list is correctly populated with my LDAP server, from ldap.ora.
However, when I select it, I get the following error:
Status : Failure -[LDAP: error code 32 - No Such Object]
Now, I've done some research, and I monitored the slapd.log file, which shows me the following:
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 fd=16 ACCEPT from IP=192.168.125.1:63781 (IP=0.0.0.0:389)
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=0 BIND dn="" method=128
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=0 RESULT tag=97 err=0 text=
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=1 SRCH base="" scope=2 deref=0 filter="(objectClass=orclContext)"
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=1 SEARCH RESULT tag=101 err=32 nentries=0 text=
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=2 UNBIND
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 fd=16 closed
Which is a lot more detail, but reflects the corresponding error code, (32 - No Such Object).
After doing some testing with ldapsearch, I've been able to replicate what SQL Developer is doing, and get the exact same error.
That ldapsearch command is:
ldapsearch -h einstein -p 389 -c -x -D "" -b "" "(objectClass=orclContext)"
Looking in the slapd.log file, I find an identical error to what is produced from SQL Developer.
Further, the query that SQL Developer wants to do can be successfully done with the following ldapsearch:
ldapsearch -h einstein -p 389 -c -x -D "" -b "dc=proquest,dc=com" "(objectClass=orclContext)"
So, it seems the problem is with the fact that SQL Developer is not supplying a search base.
I'm no LDAP expert, and I'm really not sure where to turn next....
Is there a SQL Developer option that allows me to set that search base? Is there a configuration I'm missing on the LDAP server configuration?
Thanks,
-Mark

Well, that didn't take long. I managed to find a solution to the problem.
It comes down to the fact that SQL Developer doesn't supply a search base, and my LDAP server didn't have a default search base defined.
When I edited slapd.conf (the OpenLDAP config file) and added a "defaultsearchbase" parameter, and bounced the LDAP server, everything started to work.
I now have a working configuration with OpenLDAP and SQL Developer.
I'll mark this discussion as closed.
-Mark

Oracle sql developer ....Debugging problem even with the proper rights

Hi all,sorry for raising this question in this forum.I dont see SQL Developer forum anywhere.
I am trying to debug my pl-sql procedure but unable to do it.I have been given all the debugging rights by the DBA (that is what he tells me ).
I do get the bug icon ,and I do click a break point ,but after clicking the bug button
I just get this message in the Debugging-log panel
Connecting to the database ahdb_t5.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '10.2.46.58', '1859' )
Please help
Thx

This is the message I get once I click the debug button (after few seconds)
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '10.2.46.58', '1957' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1

SQL Developer 4 EA1 - External Tool Parameter Prompt With Generic Name

I have an external tool (WinSCP - an FTP/SCP program) integrated into SQL Developer.
The tool is set up as follows:
Program Executable:
C:\Program Files (x86)\WinSCP\WinSCP.exe
Arguments:
/console /command "open scp://root:${promptl:label=Password}@${promptl:label=Server}" "cd /gers/live/adhoc/${promptl:label=CRM_Directory}" "put ${file.path}"
Run Directory:
C:\Program Files (x86)\WinSCP
In 3.2
Dialog Title: "Invoke Tool"
Prompt: "Password"
In 4.0 EA1
Dialog Title: "Invoke Tool"
Prompt: "Tool Argument Value:"

Aces!!! You nailed it Gary...
Thank you.
I applied fixed noted in Re: Reduce SQLDeveloper memory footprint with JDK 1.7
For others, to summarize my changes.
product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
AddVMOption -XX:+UnlockExperimentalVMOptions
AddVMOption -XX:+UseG1GC
AddVMOption -XX:MaxGCPauseMillis=50
AddVMOption -XX:GCPauseIntervalMillis=200
AddVMOption -XX:MaxPermSize=128M
AddVMOption -Xms50M
AddVMOption -Xmx384M
AddVMOption -XX:MinHeapFreeRatio=10
AddVMOption -XX:MaxHeapFreeRatio=10
product\11.2.0\client_3\sqldeveloper\ide\bin\ide.conf
comment the following two lines as shown below
#AddVMOption -Xmx640M
#AddVMOption -Xms128M
Now SQL Developer runs at roughly 500 meg.
I guess the only thing I have left to ask others reviewing this would be if there is a way to get these memory values down without having much adverse impacts on SQL Developer based on newer JVM switches/functionalities.
The posts that drove these changes are old from a technologoical perspective :) 2010.
Tom

Oracle sql developer version 1.5.5.59 compatible with Windows 7 [64 bit]

am currently using Oracle sql developer version 1.5.5.59, in some time my O.S. is going to migrate from WinXP to Windows 7 [64 bit] can anyone suggest me how to check/find whether Oracle version 1.5.5.59 need to be upgrade or not?

Yes.
Adobe - Photoshop CS5 Extended System Requirements

SQL Developer 1.5.1 won't display UI any longer...

Howdy, y'all; I'm using SQL Developer 1.5.1 on a laptop with Windows XP Pro SP3, fully patched, and 2 GB of memory. I try to run the system efficiently with as few processes and services as necessary, so as to avoid compatibility problems. All other apps, including Office 2K3 are fully patched.
I'm trying to export data from an Oracle 10.1 instance; it worked for a while, but now SQL Developer doesn't run. In Windows Task Manager, I see "sqldeveloper.exe" as a process using ~95 MB of memory, but no CPU; the UI doesn't appear beyond the startup tips dialog.
I changed the UI style from "Oracle" to "Windows" in the Preferences dialog, just to see what it would look like. Might this have broken SQL Developer? Don't wanna re-install if it's not necessary.
Thanks for your assistance.
Sincerely,
APJ in The OC, SoCal.

I had a similar issue, icons and display window was all messed up and mousing over made things worse.
Solution
I noticed that errors were being logged on the logging page tab, errors like:
source : o.jt.ui.themes.ThemeProperties
Message: Failed to load icon etc.
Somehow the default Fusion Blue theme has gotten corrupted and I can't get it back. I changed the Theme and now it works fine. Tools -> Preferences -> Environment -> Theme pulldown box. FYI - I'm using the Oracle look and feel setting.
Clues
Logging on as another user on the same machine didn't have problems with the Fusion Blue theme.
Anyone know where these themes are stored? There should be a error handling routine in the code for this situation.
_Things that didn't work_
- Messing with the Java SDK versions
- Delete and re-install
- Switching between the versions that did and didn't include the Java SDK
- Delete c:\documents and settings\user\Application Data\SQL Developer directory didn't work either, but now my DB connections settings are gone. :( At least the software is usable again.

I can't make updates from SQL Developer

I've been using SQL Navigator from Quest software to make some updates to data. I just run a select query with the updateable button selected and i can type in my updates and hit commit to make changes.
I can't figure out how to do this in SQL Developer. It won't let me make any changes. Is there an updateable button somewhere? I really like SQL developer and use it for a lot of things, but it's annoying to have to go and open SQL Navigator when I want to manually update a row.
Edited by: user9937030 on Oct 6, 2008 1:13 PM

Apart from using plain SQL in the SQL Worksheet and the table's Data tab (which, as said, are currently the only possibilities), you can also vote on the request (http://htmldb.oracle.com/pls/otn/f?p=42626:39:1949458845889031::NO::P39_ID:4902) to add weight for getting this implemented sooner...
Have fun,
K.

Password change fails in SQL Developer with verify function...

A couple of months ago I enforced a password verify function on our 11.2.0.3 databases and also one legacy 10.2.0.4 database.
At the time I tested on my account (which had elevated privileges...doh!).   Now some users are hitting expiry, they can't change it via SQL Developer.
If I create a user with 'create session' privilege and set their profile to one that uses the verify function (see both below), I then log in to SQL Developer (we have tried with versions 3.1 (Windows) and 3.2 (Linux) with same failure results.
BTW,.. the password verify function enforces the following:
password must be minimum of 8 characters
password must not be the same as the user name, or user name (1-100)
password must contain at least a single digit
password must contain at least a single character
1. Works = I log into the local server and run command line SQLPlus, type 'password' and update.   I can successfully change my password.
2. Fails = I log into the local server and run command line SQLPlus, type 'alter user <me> identified by <newpwd>;' I get:
TEST: SUTEMP > alter user sutemp identified by carport9999;
alter user sutemp identified by carport9999
ERROR at line 1:
ORA-28221: REPLACE not specified
This error is because the account does not have the 'alter user' privilege.   I'm okay with this, as I don't want our users having this privilege.
3. I start SQL Developer 3.2, type 'alter user <me> identified by <newpwd>;' I get the same ORA-28221 error as above.   That is fine, and as expected.
4. Now in SQL Developer, I type 'password', set a valid password, but I get 'Failed to change password' in the Script Output tab.
I have a database 'after servererror on database' trigger set, and querying the database table it is logging into, I see a record with a date stamp matching my failure with a server_error=28221 (the same as above).
So I'm wondering if I'm doing something wrong here, or if this is a bug in SQL Developer.   I don't want standard users having 'alter user' privileges, but I do want to enforce password verification.
I get the same result on three 11.2.0.3 databases (haven't tried any more but suspect same results for others) and one legacy 10.2.0.4 database, and using SQL Developer 3.1 and 3.2.
DBA_PROFILE used:
PROFILE
RESOURCE_NAME
RESOURCE LIMIT
CTRU
COMPOSITE_LIMIT
KERNEL     DEFAULT
CTRU
SESSIONS_PER_USER
KERNEL     10
CTRU
CPU_PER_SESSION
KERNEL     DEFAULT
CTRU
CPU_PER_CALL
KERNEL     DEFAULT
CTRU
LOGICAL_READS_PER_SESSION    KERNEL     DEFAULT
CTRU
LOGICAL_READS_PER_CALL
KERNEL     DEFAULT
CTRU
IDLE_TIME
KERNEL     DEFAULT
CTRU
CONNECT_TIME
KERNEL     DEFAULT
CTRU
PRIVATE_SGA
KERNEL     DEFAULT
CTRU
FAILED_LOGIN_ATTEMPTS
PASSWORD 10
CTRU
PASSWORD_LIFE_TIME
PASSWORD 180
CTRU
PASSWORD_REUSE_TIME
PASSWORD DEFAULT
CTRU
PASSWORD_REUSE_MAX
PASSWORD 5
CTRU
PASSWORD_VERIFY_FUNCTION     PASSWORD VERIFY_FUNCTION_11G
CTRU
PASSWORD_LOCK_TIME
PASSWORD .002
CTRU
PASSWORD_GRACE_TIME
PASSWORD 21
16 rows selected.
Verify Function used:
$ cat utlpwdmg.sql
Rem
Rem $Header: utlpwdmg.sql 02-aug-2006.08:18:05 asurpur Exp $
Rem
Rem utlpwdmg.sql
Rem
Rem Copyright (c) 2006, Oracle. All rights reserved.
Rem
Rem    NAME
Rem      utlpwdmg.sql - script for Default Password Resource Limits
Rem
Rem    DESCRIPTION
Rem      This is a script for enabling the password management features
Rem      by setting the default password resource limits.
Rem
Rem    NOTES
Rem      This file contains a function for minimum checking of password
Rem      complexity. This is more of a sample function that the customer
Rem      can use to develop the function for actual complexity checks that the
Rem      customer wants to make on the new password.
Rem
Rem    MODIFIED   (MM/DD/YY)
Rem    suren       05/09/13 - customise for NIHI use
Rem    asurpur     05/30/06 - fix - 5246666 beef up password complexity check
Rem    nireland    08/31/00 - Improve check for username=password. #1390553
Rem    nireland    06/28/00 - Fix null old password test. #1341892
Rem    asurpur     04/17/97 - Fix for bug479763
Rem    asurpur     12/12/96 - Changing the name of password_verify_function
Rem    asurpur     05/30/96 - New script for default password management
Rem    asurpur     05/30/96 - Created
Rem
-- This script sets the default password resource parameters
-- This script needs to be run to enable the password features.
-- However the default resource parameters can be changed based
-- on the need.
-- A default password complexity function is also provided.
-- This function makes the minimum complexity checks like
-- the minimum length of the password, password not same as the
-- username, etc. The user may enhance this function according to
-- the need.
-- This function must be created in SYS schema.
-- connect sys/<password> as sysdba before running the script
CREATE OR REPLACE FUNCTION verify_function_11G
(username varchar2,
password varchar2,
old_password varchar2)
RETURN boolean IS
   n boolean;
   m integer;
   differ integer;
   isdigit boolean;
   ischar boolean;
   ispunct boolean;
   db_name varchar2(40);
   digitarray varchar2(20);
   punctarray varchar2(25);
   chararray varchar2(52);
   i_char varchar2(10);
   simple_password varchar2(10);
   reverse_user varchar2(32);
BEGIN
   digitarray:= '0123456789';
   chararray:= 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ';
   -- Check for the minimum length of the password
   IF length(password) < 8 THEN
      raise_application_error(-20001, 'Password length less than 8');
   END IF;
   -- Check if the password is same as the username or username(1-100)
   IF NLS_LOWER(password) = NLS_LOWER(username) THEN
     raise_application_error(-20002, 'Password same as or similar to user');
   END IF;
   FOR i IN 1..100 LOOP
      i_char := to_char(i);
      if NLS_LOWER(username)|| i_char = NLS_LOWER(password) THEN
        raise_application_error(-20005, 'Password same as or similar to user name ');
      END IF;
    END LOOP;
   -- Check if the password contains at least one letter, one digit
   -- 1. Check for the digit
   isdigit:=FALSE;
   m := length(password);
   FOR i IN 1..10 LOOP
      FOR j IN 1..m LOOP
         IF substr(password,j,1) = substr(digitarray,i,1) THEN
            isdigit:=TRUE;
             GOTO findchar;
         END IF;
      END LOOP;
   END LOOP;
   IF isdigit = FALSE THEN
      raise_application_error(-20008, 'Password must contain at least one digit, one character');
   END IF;
   -- 2. Check for the character
   <<findchar>>
   ischar:=FALSE;
   FOR i IN 1..length(chararray) LOOP
      FOR j IN 1..m LOOP
         IF substr(password,j,1) = substr(chararray,i,1) THEN
            ischar:=TRUE;
             GOTO endsearch;
         END IF;
      END LOOP;
   END LOOP;
   IF ischar = FALSE THEN
      raise_application_error(-20009, 'Password must contain at least one digit, and one character');
   END IF;
   <<endsearch>>
   -- Check if the password differs from the previous password by at least
   -- 3 letters
   IF old_password IS NOT NULL THEN
     differ := length(old_password) - length(password);
     differ := abs(differ);
     IF differ < 3 THEN
       IF length(password) < length(old_password) THEN
         m := length(password);
       ELSE
         m := length(old_password);
       END IF;
       FOR i IN 1..m LOOP
         IF substr(password,i,1) != substr(old_password,i,1) THEN
           differ := differ + 1;
         END IF;
       END LOOP;
       IF differ < 3 THEN
         raise_application_error(-20011, 'Password should differ from the old password by at least 3 characters');
       END IF;
     END IF;
   END IF;
   -- Everything is fine; return TRUE ;
   RETURN(TRUE);
END;
alter profile ctru limit password_verify_function verify_function_11g;
alter profile default limit password_verify_function verify_function_11g;
alter profile web_and_it limit password_verify_function verify_function_11g;

okay,... I just saw another website which shows I should put in the 'replace <oldpwd>' clause in.
This works in SQL Developer:     alter user sutemp identified by carport999 replace garage999;
So why does the 'password' command fail?     (Developers: it would also be helpful to have the ORA- error displayed as opposed to 'Failed to change password')

Apex Listener 2.0.1 vs Sql Developer Administration 3.2.20.09 bugs

Apex Listener 2.0.1 / Sql Developer 3.2.20.09 / Apex 4.1.1
1. I'm using basic connection type with service name. Each time I connect to listener administration it is resetted to SID with default name as orcl.
2. Test Settings does not work in case hostname is localhost.
Database Settings apex:Cannot connect to APEX_PUBLIC_USER. Исключение ввода/вывода (input/output exception): The Network Adapter could not establish the connection>
At the same time it's working in defaults.xml:
<entry key="db.hostname">localhost</entry>I'm not sure why. Database and Apex Listener are installed on the same mashine. May be this can help:
<Warning> <Server> <x> <> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <> <BEA-002611> <Hostname "x", maps to multiple IP addresses: 10.110.x.x, 0:0:0:0:0:0:0:1> 3. I can see "Enable RESTful Services" action in (url http://docs.oracle.com/cd/E35137_01/appdev.32/e35117/intro.htm#autoId110)SQL Developer User's Guide. Still there is no such action in Sql Developer. Thus settings are always uploaded with enabled RESTful Services.
I see error
The pool named: apex_al does not existeach time I connect to Apex Listener Administration in case of RESTful Services is not configured during configuration of apex.war.
I can't find any restrictions for RESTful Services to be configured. So I think this error is unnecessary.
4. From sql developer User's Guide
Connect (context menu only): Connects to the Application Express Listener (see Connecting to Application Express Listener Server).Retrieve Settings, Upload Settings, and Launch URL are enabled when you connect to the Application Express Listener.>
administration settings are retrieved and displayed but still Retrieve Settings, Upload Settings, and Launch URL are disabled in context menu after connection.
I need to perform New Administration action to make them enabled.
Is this expected behavior ?
Is this all bugs or known features ?
Regards,
Igor

DB: V11.2
APEX V 4.2.3.00.08
APEX Listener: V2.0.5.287.04.27
SQLDeveloper: Version 3.2.20.09
OS WIndows 7 64 bit
I am trying to create a connection to a standalone Apex Listener installation via SQL Developer to manage the listener settings. I start a new connection and after entering the UN/PWD of the Listener Administrator I get the following error:
Authentication failed
"CANNOT CONNECT TO CONNECTION.
INVALID RESOURCE OWNER CREDENTIALS"
In the Standalone APEX Listener DOS window I'm getting the following error message:
SEVERE: The pool named: apex_al does not exist
So where do I even start to trouble shoot this???
I add a connection as follows:
Connection Name: Connection
Usename: adminlistener (pwd=adminlistener configured using command :java -jar apex.war user adminlistener "Listener Administrator")
HTTP radio button
Hostname: localhost
Port: 8080
Server Path: /apex
thanks in advance
Paul Platt

EA3 - SQL Developer EA 4.0.0.13 errors on EBS IBY_EXT_BANK_ACCOUNTS but 3.2.09 does not

Hello,
I am using SQL Developer recent release EA 4.0.0.3.2.09 build main 12.84 (and another user on EA 4.0.0.13 build main 13.30) run into this error when query IBY_EXT_BANK_ACCOUNTS in Oracle EBS R12
ORA-29275: partial multibyte character
29275. 00000 - "partial multibyte character"
*Cause: The requested read operation could not complete because a partial
multibyte character was found at the end of the input.
*Action: Ensure that the complete multibyte character is sent from the
remote server and retry the operation. Or read the partial
multibyte character as RAW.
The issue appears to be this one:
ORA-29275: Partial Multibyte Character Querying IBY_EXT_BANK_ACCOUNTS (Doc ID 806024.1)
However, prior versions of SQL Developer (eg 3.2.09) work fine with the same query so this appears to be a regression in the new version of SQL Developer? I am using the OCI/thick drivers (and the 3.2.09 user is not).
Query
select * from apps.IBY_EXT_BANK_ACCOUNTS;
Jay
Error Codes
ORA-29275
Problem Category/Subcategory
Oracle SQL Developer Worksheet
Uploaded Files
Template Question Responses
1) ### Client platform/os/version ### _DT-SQLWO_
Windows 7 professional SP1 64 bit
2) ### Server platform/os/version ###
Redhat 4.4.6-3
Linux XXX.XXXXX.XXX 2.6.39-200.24.1.el6uek.x86_64 #1 SMP Sat Jun 23 02:39:07 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux
Linux version 2.6.39-200.24.1.el6uek.x86_64 ([email protected]) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Sat Jun 23 02:39:07 EDT 2012
3) ### Database version ###
11g (11.2.0.3)
4) ### Java version ###
java version "1.7.0_25"
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode)
5) ### Error Messages ###
ORA-29275: partial multibyte character
29275. 00000 - "partial multibyte character"
*Cause: The requested read operation could not complete because a partial
multibyte character was found at the end of the input.
*Action: Ensure that the complete multibyte character is sent from the
remote server and retry the operation. Or read the partial
multibyte character as RAW.
6) ### Failing statement ###
select * from apps.IBY_EXT_BANK_ACCOUNTS;
7) ### frequency of the error ###
Always
8) ### Reproducible in sqlplus ###
Yes

We will try to reproduce your problem in house and come back with any workarounds or suggestions. Thank you for reporting this.
Prashanth

Problems using Quick Migrate in SQL Developer 1.5 for MySQL to Oracle 10g

Hi all,
I am trying to use SQL Developer 1.5 migration tools (Quick Migrate) to perform online capture and build source model to migrate from MySQL 5.x to Oracle 10g on Windows platform. I get these errors and the Quick Migrate process fails:
oracle.dbtools.metadata.persistence.PersistableObject.doInsert(PersistableObject.java:238)
I did a search and used the sqldeveloper.cmd script but still fails. Then I created a new database and truncated the repository. I now get the above error plus two new ones listed below:
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
Error loading nls:OALL8 is in an inconsistent state
Error occurred during capture: Protocol violation
It fails during the capture process for MySQL 5.1 database
when it begins to capture the tables from MySQL.
Does anyone know how to resolve these issues when migrating from MySQL to Oracle 10g using Quick Migrate with SQL Developer 1.5 release?
Regards,
Ben Prusinski
Message was edited by:
benprusinski
Message was edited by:
benprusinski

Hi all,
I put the following in my sqldeveloper.cmd file:
SET ORACLE_HOME=%CD%
What is very confusing is that with SQL Developer 1.5, there are several levels and several SQL Developer executables! I am really not sure which of these to use:
I created the SQLDeveloper 1.5 directory called SQLDeveloper1_5 on Windows:
1) cd C:\sqldeveloper1_5\sqldeveloper-5338
there exists a sqldeveloper.exe
2) cd c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloper.exe
3) cd c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloer\bin\sqldeveloper.exe
Which SQLDeveloper 1.5 executable should I be using and where should I place the
sqldeveloper.cmd file?
Also I did try to use a different database and schema for the repository with Quick Migrate but it appears a bug exists in SQL Developer 1.5 version that causes errors with Quick Migrate for MySQL to Oracle? Is this correct?
As an update, I ran the following commands:
cd to
c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloper\bin
sqldeveloper.cmd sqldeveloper.exe
Start sqldeveloper.exe
Perform standard capture for MySQL using the new mig2 schema as the new repository
It starts the capture but fails on the errors below:
Error loading nls:OALL8 is in an inconsistent state
UPDATE
============================
I tried this again and it worked with the exception of one error message listed below:
Here are the steps that I followed:
1. Create a Windows cmd script
Put the following entries in the script:
SET ORACLE_HOME=%CD%
save the command windows script as sqldeveloper.cmd
Copy this script to the base installation directory for SQLDeveloper
Example:
1. cd c:\SQLDeveloper1_5\sqldeveloper-5338\sqldeveloper
2. Start SQLDeveloper with the command script that you created earlier
Example:
Open a Windows shell prompt window and execute the following scripts:
a) sqldeveloper.cmd sqldeveloper.exe
b) sqldeveloper.exe
3) In SQL Developer 1.5
From the Migrate menu,
a) Delete current repository and create a new schema in Oracle target database call it mig2.
b) Then create a new repository in SQL Developer 1.5
c) Right mouse click on the MySQL 5.x database and choose capture
It worked with the exception of one error message:
o.jdbc.driver.OracleDriver
Error while registering Oracle JDBC Diagnosability MBean.
So it looks like something is screwed up with my JDBC drivers and configuration for MySQL. How do I diagnose the JDBC driver issue for MySQL?
Thanks!!!
Ben
Thanks
Ben

Sql Developer 1.5.5 bug with large sequence start values.

We have a small table in our sql server 2005 schema (~700) rows. Its primary key is a bigint. We randomly generate ids for this table (don't ask). We have ids for this table which are larger than 2147483647. (java.lang.Integer.MAX_VALUE). I'm using a Windows 10g instance as the repository:
SQL> select * from v$version
2 ;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Capturing this model works fine.
Converting this model works fine.
When the converted model is "Generated", Sql Developer stops generating the script before the worksheet window is opened with the generated sql. If run from sqldeveloper/bin, this exception is output to the console:
java.lang.Exception: java.util.NoSuchElementException
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.start(AbstractMigrationProgressRunnable.java:141)
at oracle.dbtools.migration.workbench.core.GenerateInitiator.launch(GenerateInitiator.java:42)
at oracle.dbtools.raptor.controls.sqldialog.ObjectActionController.handleEvent(ObjectActionController.java:149)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:524)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:855)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:496)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
at java.awt.Component.processMouseEvent(Component.java:6134)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
at java.awt.Component.processEvent(Component.java:5899)
at java.awt.Container.processEvent(Container.java:2023)
at java.awt.Component.dispatchEventImpl(Component.java:4501)
at java.awt.Container.dispatchEventImpl(Container.java:2081)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4301)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3965)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3895)
at java.awt.Container.dispatchEventImpl(Container.java:2067)
at java.awt.Window.dispatchEventImpl(Window.java:2458)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.util.NoSuchElementException
at oracle.dbtools.metadata.persistence.PersistableObjectIterator.next(PersistableObjectIterator.java:131)
at oracle.dbtools.migration.generate.GenerateWorker.generateSequences(GenerateWorker.java:862)
at oracle.dbtools.migration.generate.GenerateWorker.generateIndividualSchema(GenerateWorker.java:456)
at oracle.dbtools.migration.generate.GenerateWorker.generateSchema(GenerateWorker.java:365)
at oracle.dbtools.migration.generate.GenerateWorker.runGenerate(GenerateWorker.java:220)
at oracle.dbtools.migration.workbench.core.ui.GenerateRunner.doWork(GenerateRunner.java:71)
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.run(AbstractMigrationProgressRunnable.java:161)
at oracle.dbtools.migration.workbench.core.ui.MigrationProgressBar.run(MigrationProgressBar.java:569)
at java.lang.Thread.run(Thread.java:619)
A problem row can be viewed by issuing this query against the repository:
select * from md_sequences where seq_start > 2147483647;
We have one row returned. The oracle.dbtools.metadata.persistence.MdSequence class uses a java.lang.Integer value to store the start value for the sequence. The value stored in the repository's MD_SEQUENCE table overflows the Integer type.
Updating the SEQ_START column in the MD_SEQUENCE table fixed our problem. (Well, I can now generate the schema. I may have other problems with the sequence being off).
I've written this post to save someone else the day it took me to diagnose this problem with Sql Developer 1.5.5. At the very least Sql Developer should inform the user that it could not generate the script because of the large sequence start value. It basically swallows any error and terminates script generation without any type of feedback.

Update: I was able to recreate the problem!
1. Create a new table (I used TEST).
2. Mark first column af primary key.
3. Save the table.
Notice the name of the primary key index created: (TEST_PK in my case)
4. Edit the table.
5. Under constraints change the name of the primary key constraint.
6. Save the table.
Notice that the index still has its original name.
7. Edit the table.
8. Change something.
9. Attempt to save changes (Fails).
Conclusion:
Either SQL Developer should be aware of indexes with different name than a constraint,
or when SQL Developer changes the name of a constraint with an index, both the constraint and the index should be renamed.

SQL Developer 3.x won't horizontal slide with 2 fingers

Similar Messages

Maybe you are looking for